SEARCH · Engineering Papers

Results for “Data Reasoning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Human factors in aviation operations: The hearback problem

This report covers a study of ASRS reports wherein ATC controllers failed to monitor adequately (hearback) incorrect readbacks of ATC clearances. A total of 417 reports received over a period of 29 months from April 1981 through July 1983 comprised the study data set. Factors examined were: the reasons for a flight crew's getting clearances incorrectly, the operating factors that caused controllers to mishear or not hear the correct readbacks, and consequences of the various types of hearback misses. The principle conclusion of the study takes the form of a precaution to flight crews that a controller's not challenging a readback does not necessariliy mean the readback is correct and that flight crews must explicitly question any doubtful or unusual aspects of clearances rather than depending on controllers to detect readback errors.

Monan, William P.↗

NASA NTRS1989

A vector scanning processing technique for pulsed laser velocimetry

Pulsed laser sheet velocimetry yields nonintrusive measurements of two-dimensional velocity vectors across an extended planar region of a flow. Current processing techniques offer high precision (1 pct) velocity estimates, but can require several hours of processing time on specialized array processors. Under some circumstances, a simple, fast, less accurate (approx. 5 pct), data reduction technique which also gives unambiguous velocity vector information is acceptable. A direct space domain processing technique was examined. The direct space domain processing technique was found to be far superior to any other techniques known, in achieving the objectives listed above. It employs a new data coding and reduction technique, where the particle time history information is used directly. Further, it has no 180 deg directional ambiguity. A complex convection vortex flow was recorded and completely processed in under 2 minutes on an 80386 based PC, producing a 2-D velocity vector map of the flow field. Hence, using this new space domain vector scanning (VS) technique, pulsed laser velocimetry data can be reduced quickly and reasonably accurately, without specialized array processing hardware.

Wernet, Mark P.↗

NASA NTRS1989

Numerical investigation of chemically reacting flows in ramjet dump combustors

The time-dependent Navier-Stokes equations, including second-order turbulence model, are numerically integrated by using four-stage Runge-Kutta scheme to predict the steady-state supersonic flow structures in ramjet dump combustors. The formulation is derived for reacting flows with finite-rate chemistry. In the present study, it is firstly attempted to assess the accuracy of existing high-order turbulence model in supersonic flows. The comparison shows reasonable agreement between calculated and measured data in terms of velocity distributions. It is indicated that a modified constant C-mu for calculating turbulent eddy viscosity is needed in the supersonic flow regime and the adaptive meshing is preferred to capture the recirculation zone. In the reacting flow calculation, the results from a test case of hydrogen and air combustion at premixed conditon show that the rearward facing step is able to increase flow residence time and stabilize the flame in supersonic flows.

Hsieh, Kwang-Chung↗

NASA NTRS1991

Nonequilibrium chemical and radiation coupling phenomena in AOTV flowfields

A flowfield model for the nonequilibrium stagnation region of high altitude entry vehicles which includes nonequilibrium chemistry, multitemperature, viscous, conduction, and diffusion effects is presented. It contains coupled nongray nonequilibrium radiative transfer for atoms and molecules and local thermodynamic nonequilibrium phenomena. Comparison with Fire 2 flight data verifies that the model is reasonably accurate; and it has been applied to two AFE trajectory points, a high speed return from Mars, a series of points at 80 km for 12 to 16 km/sec, and three altitudes at 16 km/sec. Based on these results shock slip is significant, radiation cooling/coupling is minor at AFE conditions but important by 14 km/sec and dominant at 16 km/sec, radiation for the AFE is small but important and primarily molecular, above 12 km/sec atomic radiation is a significant or dominant portion of the total heating, and local thermodynamic nonequilibrium is important and should be included in all models.

Carlson, Leland A.↗

NASA NTRS1991

Source function approach to turbulence bulk properties

A turbulence model to compute bulk properties is presented in which a prescribed source function is used to provide the rate of energy input into the turbulent flow, and the EDQNM model is used to treat the nonlinear transfer in the Navier-Stokes equations. The predictions of the model are tested against (1) the measured Nusselt number versus Rayleigh number relation in turbulent laboratory convection, and (2) the measured bulk kinetic energies and dissipation rates in turbulent channel flow for Reynolds numbers Re = 12,300 and 30,800. In addition, a sensitivity study is performed with respect to the choice of Kolmogorov constant. Generally, the predictions of the model are in reasonable accord with the available experimental data.

Canuto, V. M.↗

NASA NTRS1991

The effects of shock wave precursors ahead of hypersonic entry vehicles

A model has been developed to predict the magnitude and characteristics of the shock wave precursor ahead of a hypervelocity vehicle. This model includes both chemical and thermal nonequilibrium, utilizes detailed mass production rates for the photodissociation and photoionization reactions, and accounts for the effects of radiative absorption and emission on the individual internal energy modes of both atomic and diatomic species. Comparison of the present results with shock tube data indicates that the model is reasonably accurate. A series of test cases representing earth aerocapture return from Mars indicate that there is significant production of atoms, ions and electrons ahead of the shock front due to radiative absorption and that the precursor is characterized by an enhanced electron/electronic temperature and molecular ionization. However, the precursor has a negligible effect on the shock layer flow field.

Stanley, Scott A.↗

NASA NTRS1990

Analysis of unsteady compressible viscous layers

The development of an analysis to predict the unsteady compressible flows in blade boundary layers and wakes is presented. The equations that govern the flows in these regions are transformed using an unsteady turbulent generalization of the Levy-Lees transformation. The transformed equations are solved using a finite difference technique in which the solution proceeds by marching in time and in the streamwise direction. Both laminar and turbulent flows are studied, the latter using algebraic turbulence and transition models. Laminar solutions for a flat plate are shown to approach classical asymptotic results for both high and low frequency unsteady motions. Turbulent flat-plate results are in qualitative agreement with previous predictions and measurements. Finally, the numerical technique is also applied to the stator and rotor of a low-speed turbine stage to determine unsteady effects on surface heating. The results compare reasonably well with measured heat transfer data and indicate that nonlinear effects have minimal impact on the mean and unsteady components of the flow.

Power, G. D.↗

NASA NTRS1990

Heat transfer in rotating serpentine passages with smooth walls

Experiments were conducted to determine the effects of buoyancy and Coriolis forces on heat transfer in turbine blade internal coolant passages. The experiments were conducted with a large scale, multi-pass, smooth-wall heat transfer model with both radially inward and outward flow. An analysis of the governing flow equations showed that four parameters influence the heat transfer in rotating passages (coolant-to-wall temperature ratio, Rossby number, Reynolds number and radius-to-passage hydraulic diameter ratio). These four parameters were varied over ranges which are typical of advanced gas turbine engine operating conditions. It was found that both Coriolis and buoyancy effects must be considered in turbine blade cooling designs and that the effect of rotation on the heat transfer coefficients was markedly different depending on the flow direction. Local heat transfer coefficients were found to decrease by as much as 60 percent and increase by 250 percent from no rotation levels. Comparisons with a pioneering stationary vertical tube buoyancy experiment showed reasonably good agreement. Correlation of the data is achieved employing dimensionless parameters derived from the governing flow equations.

Wagner, J. H.↗

NASA NTRS1991

A Variational Formalism for the Radiative Transfer Equation: Prelude to Model 3

The MODEL III variational data assimilation model is the third of four general assimilation models designed to blend weather data measured from space based platforms in the meteorological data mainstream in a way that maximizes the information content of the satellite data. Because there are many different observation locations and there are many instruments with different measurement error characteristics, it is also necessary to require that the blending be done to maximize the information content of the data and simultaneously to retain a dynamically consistent and reasonably accurate description of the state of the atmosphere. This is ideally a variational problem for which the data receive relative weights that are inversely proportional to measurement error and are adjusted to satisfy a set of dynamical equations that govern atmospheric processes. The advantage of MODEL III over the previous two models is that radiance, the atmospheric variable measured by satellite, becomes a dependent variable. In the previous versions, mean layer temperatures that had been retrieved from the radiances by some method, were included in the assimilation by substituting them in place of the rawinsonde temperatures. Now both rawinsonde temperatures and satellite radiances are included independently in the assimilation.

Achtemeier, Gary L.↗

NASA NTRS1992

Duration and rates of discharge: Maja Valles, Mars

The 1600 km-long Maja Valles outflow system of Mars consists of three major divisions including the upper valley on Lunae Planum, the canyon section across Xanthe Terra, and the lower valley across western Chryse Planitia. Although water released from the source in Juventae Chasma could reach the terminus of the present day valley system in central Chryse Planitia within 44 hours, the original outflow did not traverse the Martian surface in a direct path. It ponded along its course on northern Lunae Planum and near the western edge of Chryse Planitia significantly prolonging the lifetime of surface flow. Calculation of pond volumes and discharge rates through various parts of the channel system indicates that water flowed through this system for nearly a (terrestrial) year. Discharge rates from the various basins along the Maja channels and the maximum flow rates within the various channels are calculated. With this data, it is possible to place reasonable estimates of the minimum length of time required to drain the various impoundments and the duration of flow in various parts of the channel system. The results of these calculations are discussed.

Dehon, R. A.↗

NASA NTRS1991

Programming in a proposed 9X distributed Ada

The studies of the proposed Ada 9X constructs for distribution, now referred to as AdaPT are reported. The goals for this time period were to revise the chosen example scenario and to begin studying about how the proposed constructs might be implemented. The example scenario chosen is the Submarine Combat Information Center (CIC) developed by IBM for the Navy. The specification provided by IBM was preliminary and had several deficiencies. To address these problems, some changes to the scenario specification were made. Some of the more important changes include: (1) addition of a system database management function; (2) addition of a fourth processing unit to the standard resources; (3) addition of an operator console interface function; and (4) removal of the time synchronization function. To implement the CIC scenario in AdaPT, the decided strategy were publics, partitions, and nodes. The principle purpose for implementing the CIC scenario was to demonstrate how the AdaPT constructs interact with the program structure. While considering ways that the AdaPt constructs might be translated to Ada 83, it was observed that the partition construct could reasonably be modeled as an abstract data type. Although this gives a useful method of modeling partitions, it does not at all address the configuration aspects on the node construct.

Waldrop, Raymond S.↗

NASA NTRS1992

Interpolation/extrapolation technique with application to hypervelocity impact of space debris

A new technique for the interpolation/extrapolation of engineering data is described. The technique easily allows for the incorporation of additional independent variables, and the most suitable data in the data base is automatically used for each prediction. The technique provides diagnostics for assessing the reliability of the prediction. Two sets of predictions made for known 5-degree-of-freedom, 15-parameter functions using the new technique produced an average coefficient of determination of 0.949. Here, the technique is applied to the prediction of damage to the Space Station from hypervelocity impact of space debris. A new set of impact data is presented for this purpose. Reasonable predictions for bumper damage were obtained, but predictions of pressure wall and multilayer insulation damage were poor.

Rule, William K.↗

NASA NTRS1992

Numerical studies of dilute and dense spray characteristics

Several issues involving the improvement of physical submodels and the computational efficiency in modeling dilute and dense spray combustion are discussed. First, the implementations of a dispersion width approach accounting for turbulent dispersion within each computational parcel is discussed. This is essentially a statistical transport model and the testings of this model confirm the capability of accurately representing dispersion in nearly-homogeneous and inhomogeneous turbulent flows with improved efficiency over the delta function stochastic separated flow model. To account for the dense spray effects, an existing drop collision and coalescence model and a Taylor analogy breakup (TAB) model were employed. These models were incorporated into a state-of-the-art multiphase all-speed transient flow solution procedure. Several examples including nonevaporating, evaporating, and burning dense spray cases were studied. The numerical results show reasonably good comparisons with available experimental data in terms of spray penetration, drop sizes, and overall configuration of a spray flame.

Kim, Y. M.↗

NASA NTRS1992

Mission operations technology

Developments in the area of spacecraft operations are examined that can be utilized in mission and spacecraft designs to enhance the efficiency of planetary and other mission operations. The technology enhancements described address four major systems: the spacecraft, the tracking and data system, the spaceflight operations center, and the flight projects. Specific technological advances are detailed in the areas of telemetry monitoring and fault analysis, scheduling systems, and scientific data analysis. The Spacecraft Health Automated Reasoning Prototype and the Engineering Analysis Subsystem Environment can provide real-time monitoring and analysis with limited workforce resources. The Multimission Automation for Real-time Verification of Spacecraft Engineering Link, the Operation Mission Planner, and the Sky Image Classification and Archiving Tool are other examples of systems developed by NASA that enhance operations technology by reducing the need for human input.

Varsi, Giulio↗

NASA NTRS1992

Commercial opportunities in bioseparations and physiological testing aboard Space Station Freedom

The Center for Cell Research (CCR) is a NASA Center for the Commercial Development of Space which has as its main goal encouraging industry-driven biomedical/biotechnology space projects. Space Station Freedom (SSF) will provide long duration, crew-tended microgravity environments which will enhance the opportunities for commercial biomedical/biotechnology projects in bioseparations and physiological testing. The CCR bioseparations program, known as USCEPS (for United States Commercial Electrophoresis Program in Space), is developing access for American industry to continuous-flow electrophoresis aboard SSF. In space, considerable scale-up of continuous free-flow electrophoresis is possible for cells, sub cellular particles, proteins, growth factors, and other biological products. The lack of sedemination and buoyancy-driven convection flow enhances purity of separations and the amount of material processed/time. Through the CCR's physiological testing program, commercial organizations will have access aboard SSF to physiological systems experiments (PSE's); the Penn State Biomodule; and telemicroscopy. Physiological systems experiments involve the use of live animals for pharmaceutical product testing and discovery research. The Penn State Biomodule is a computer-controlled mini lab useful for projects involving live cells or tissues and macro molecular assembly studies, including protein crystallization. Telemicroscopy will enable staff on Earth to manipulate and monitor microscopic specimens on SSF for product development and discovery research or for medical diagnosis of astronaut health problems. Space-based product processing, testing, development, and discovery research using USCEPS and CCR's physiological testing program offer new routes to improved health on Earth. Direct crew involvement-in biomedical/biotechnology projects aboard SSF will enable better experimental outcomes. The current data base shows that there is reason for considerable optimism regarding what the CCDS program and the biomedical/biotechnology industry can expect to gain from a permanent manned presence in space.

Hymer, W. C.↗

NASA NTRS1993

Analysis of a high speed civil transport configuration at subsonic flow conditions using a Navier-Stokes solver

Computations of three dimensional vortical flows over a generic High Speed Civil Transport (HSCT) configuration with an aspect ratio of 3.04 are performed using a thin-layer Navier-Stokes solver. The HSCT cruise configuration is modeled without leading or trailing edge flap deflections and without engine nacelles. The flow conditions, which correspond to tests done in the NASA Langley 8-Foot Transonic Pressure Tunnel (TPT), are a subsonic Mach number of 0.3 and Reynolds number of 4.4 million for a range-of-attack (-.23 deg to 17.78 deg). The effects of the farfield boundary location with respect to the body are investigated. The boundary layer is assumed turbulent and simulated using an algebraic turbulence model. The key features of the vortices and their interactions are captured. Grid distribution in the vortex regions is critical for predicting the correct induced lift. Computed forces and surface pressures compare reasonably well with the experimental TPT data.

Lessard, Victor R.↗

NASA NTRS1993

Duration and rates of discharge - Maja Valles, Mars

De Hon, R. A.↗

NASA NTRS1993

A comparison of regional isentropic-sigma and sigma model simulations of the January 1979 Chicago blizzard

In an initial effort in regional numerical weather prediction, results from the University of Wisconsin isentropic-sigma (UW theta-sigma) hybrid model and an 'identical' sigma model are compared. The two main objectives are to demonstrate the capability of the UW theta-sigma model for regional numerical weather prediction and to identify advantages of the hybrid model in simulating atmospheric water vapor transport and precipitation relative to the sigma model. The 72-h simulations produced by the two models extend over a region covering the western Pacific Ocean, North America, and the western Atlantic Ocean. The simulations begin at 0000 UTC 13 January 1979, a period during which an intense Chicago blizzard develops over the central United States. This period also includes the rapid development of a cyclone in the western Pacific Ocean. Results using the Global Weather Experiment (GWE) ECMWF level IIIB data as initial and verification data indicate that both models produce reasonable and similar 72-h simulations, with the UW theta-sigma model mass and momentum distributions being slightly more accurate than the sigma model. Of particular importance for the Chicago blizzard is that the UW theta-sigma model more accurately simulates water vapor transport northward from the Gulf of Mexico and westward from the Atlantic Ocean. As a result, the hybrid model more accurately simulates observed precipitation, especially over the northeastern U.S. and southeastern Canada.

Zapotocny, Tom H.↗