Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Design and simulation of n -type solar cells based on an iodine-doped CdTe absorber using SCAPS-1D

The performance of conventional p-type CdTe solar cells has plateaued in recent years, motivating exploration of n-type absorbers. Here, we evaluate a homojunction solar cell employing iodine-doped CdTe (CdTe:I) as the absorber in a Ti 3 C 2 T x MXene/p-CdTe:As/n-CdTe:I/indium structure through SCAPS-1D simulations and prototype devices. Optimized simulations predict efficiencies above 25% for thin CdTe:I absorbers (~0.7 μm). In contrast, the first prototype achieved only ~1.36% efficiency with V OC = 0.48 V, J SC = 6.45 mA/cm 2 and FF = 43.8%. When the simulation is adjusted to match the actual device structure, and the effective illumination is reduced to account for front-side light loss, the predicted V OC (0.48 V) and JSC (6.74 mA/cm 2 ) closely reproduce the experimental values. This suggests that the device performance is primarily limited by reduced front-side photon transmission and other material non-idealities. These results highlight the promise of iodine-doped n-type CdTe and identify clear pathways for further efficiency improvement.

14 SOLAR ENERGY↗
DOE OSTI2023

Stabilizing Ni-rich layered cathode for high-voltage operation through hierarchically heterogeneous doping with concentration gradient

High-nickel LiNi x Mn y Co 1-x-y O 2 (NMC) cathodes have demonstrated superior energy density, yet their stability is compromised under high voltage conditions. To address this, here we propose a strategy of heterogeneous doping with a concentration gradient, specifically through Sr–Zr co-modification. We synthesized Ni-rich NMC particles featuring several micron-sized secondary particles composed of micron-sized primary grains. This design aims to harness the structural robustness of single-crystalline grains and the favorable diffusion kinetics of polycrystalline secondary particles. Systematic characterization using a combination of electrochemical measurements and synchrotron analytics reveals an intriguing pattern of hierarchically heterogeneous Sr–Zr co-doping. It demonstrates a depth-dependent concentration gradient at the secondary particle level and competing dopant segregation over the buried grain boundaries. This unique characteristic creates opportunities for enhancing battery performance, particularly by optimizing precursors and implementing advanced modulation techniques. We also investigate the dissolution and precipitation of the cathode's transition metal cations upon high-voltage cycling. These insights suggest that a tailored compositional variation can be a viable approach to effectively design the next-generation high-Ni NMC cathode materials for high-voltage lithium batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Improved thermoelectric performance in Cr-doped two-dimensional Bi 2 Te 3

Thermoelectric materials with high electrical conductivity and low thermal conductivity (e.g., Bi 2 Te 3 ) can efficiently convert waste heat into electricity. However, despite favorable theoretical predictions, individual Bi 2 Te 3 nanostructures such as two-dimensional (2D) nanoplates tend to underperform bulk Bi 2 Te 3 . We report a novel surface doping technique to synthesize highly n-type Bi 2 Te 3 nanoplates using an external Cr coating followed by a thermal annealing process in a reducing atmosphere, as well as the mechanism by which this surface coating – only a few atoms or less in thickness – can observably impact the thermoelectric performance of 2D Bi 2 Te 3 . The Cr atoms act as n-type carrier donors by directly incorporating into the Bi 2 Te 3 structure during thermal annealing, enhancing electrical conductivity by ∼ 70 % while increasing thermal conductivity by only ∼ 5 % at room temperature. Compared to the uncoated Bi 2 Te 3 nanoplate, the Cr-doped Bi 2 Te 3 nanoplate exhibits a doubled thermoelectric figure of merit (zT), which is still relatively low. Raman spectroscopy and chemical potential simulations further confirm that Cr atoms are incorporated into the Bi 2 Te 3 structure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Titanium doped kagome superconductor CsV 3–x Ti x Sb 5 and two distinct phases

The vanadium-based kagome superconductor CsV 3 Sb 5 has attracted tremendous attention due to its unexcepted anomalous Hall effect (AHE), charge density waves (CDWs), nematicity, and a pseudogap pair density wave (PDW) coexisting with unconventional strong-coupling superconductivity. The origins of CDWs, unconventional superconductivity, and their correlation with different electronic states in this kagome system are of great significance, but so far, are still under debate. Chemical doping in the kagome layer provides one of the most direct ways to reveal the intrinsic physics, but remains unexplored. Here, we report, for the first time, the synthesis of Ti-substituted CsV 3 Sb 5 single crystals and its rich phase diagram mapping the evolution of intertwining electronic states. The Ti atoms directly substitute for V in the kagome layers. CsV 3–x Ti x Sb 5 shows two distinct superconductivity phases upon substitution. The Ti slightly-substituted phase displays an unconventional V-shaped superconductivity gap, coexisting with weakening CDW, PDW, AHE, and nematicity. The Ti highly-substituted phase has a U-shaped superconductivity gap concomitant with a short-range rotation symmetry breaking CDW, while long-range CDW, twofold symmetry of in-plane resistivity, AHE, and PDW are absent. Furthermore, we also demonstrate the chemical substitution of V atoms with other elements such as Cr and Nb, showing a different modulation on the superconductivity phases and CDWs. These findings open up a way to synthesise a new family of doped CsV 3 Sb 5 materials, and further represent a new platform for tuning the different correlated electronic states and superconducting pairing in kagome superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Development of arsenic doped Cd(Se,Te) absorbers by MOCVD for thin film solar cells

Recent developments in CdTe solar cell technology have included the incorporation of ternary alloy Cd(Se,Te) in the devices. CdTe absorber band gap grading due to Se alloying contributes to current density enhancement and can result in device performance improvement. Here we report Cd(Se,Te) polycrystalline thin films grown by a chamberless inline atmospheric pressure metal organic chemical vapour deposition technique, with subsequent incorporation in CdTe solar cells. The compositional dependence of the crystal structure and optical properties of Cd(Se,Te) are examined. Selenium graded Cd(Se,Te)/CdTe absorber structure in devices are demonstrated using either a single CdSe layer or CdSe/Cd(Se,Te) bilayer (with or without As doping in the Cd(Se,Te) layer). Cross-sectional TEM/EDS, photoluminescence spectra and secondary ion mass spectroscopy analysis confirmed the formation of a graded Se profile toward the back contact with a diffusion length of ~1.5 um and revealed back-diffusion of Group V (As) dopants from the CdTe layer into Cd(Se,Te) grains. Due to the strong Se/Te interdiffusion, CdSe in the Se bilayer configuration was unable to form an n-type emitter layer in processed devices. In situ As doping of the Cd(Se,Te) layer benefited the device junction quality with current density reaching 28.3 mA/cm 2 . The results provide useful insights for the optimisation of Cd(Se,Te)/CdTe solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Stresses within rare-earth doped yttria-stabilized zirconia thermal barrier coatings from in-situ synchrotron X-ray diffraction at high temperatures

There is a growing interest for smart coatings that can be integrated into turbine engines for in-situ temperature measurements or health monitoring. The addition of rare-earth dopants into standard thermal barrier ceramic top coat materials is used to obtain luminescent coatings that enable spectral measurements, for real-time temperature or health monitoring. The thermomechanical performance and durability of such novel coating compositions in extreme environments still remains to be evaluated. Consequently, the ability to manufacture sensor coatings which present suitable thermal properties needs to be demonstrated. For this study, highly luminescent erbium and europium doped yttria-stabilized zirconia and state-of-the-art yttria-stabilized zirconia coatings manufactured by air plasma spray were characterized to determine the effects of the embedded rareearth dopants on coating internal strain and stress and to quantify and compare their high temperature response using synchrotron X-ray diffraction. In-situ depth-resolved strain measurements were performed at 15 μm intervals along the depth of the coatings to evaluate materials response at key locations, specifically at layer interfaces. In-plane stress was calculated for the coatings and a finite element model was implemented to supplement the results and enable further predictions. The results show that the sensor coatings that were manufactured in this work revealed only minor variations in the strain response of sensor coatings under a typical thermal cycle and especially at temperatures closer to that of gas turbine operating conditions, compared to state-of-the-art coatings. This work demonstrates the viability of manufacturing rare-earth doped yttria-stabilized zirconia coatings that provide beneficial spectroscopic monitoring capabilities while having minimal impact on the thermomechanical response of the thermal barrier coatings.

Air plasma spray↗
DOE OSTI2023

Defect Chemistry and Doping of Ultrawide Band Gap (III)BO 3 Compounds

New wide band gap semiconductors are needed to increase the power, voltage, and switching frequency limits of power electronic devices. A recent computational search identified a family of ultrawide band gap (4.8-7.8 eV) group-III orthoborates as promising materials for power electronics, assuming n-type doping could be attained. In this report we test this assumption by investigating the defect chemistry and dopability of rhombohedral calcite-structured AlBO 3 , GaBO 3 , and InBO 3 using first-principles calculations. Of the three, we find InBO 3 to have the most potential for n-type doping without significant compensation by native acceptor defects. Furthermore, Zr is predicted to readily substitute for In and behave as a shallow donor with maximal net donor concentrations exceeding 1 x 10 18 cm -3 under growth conditions typical for this class of materials. We also demonstrate thin film growth of InBO3 and measure its absorption onset, which we find to be consistent with theory. Ultimately, our results confirm the promise of InBO 3 as an n-type ultrawide band gap semiconductor and point to alloying with GaBO 3 and AlBO 3 for further optimization of band gap and electron concentration for high-power applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning the Interaction between Platinum Single Atoms and Ceria by Zirconia Doping for Efficient Catalytic Ammonia Oxidation

Aiming at the development of an efficient NH 3 oxidation catalyst to eliminate the harmful NH 3 slip from the stationary flue gas denitrification system and diesel exhaust aftertreatment system, a facile ZrO 2 doping strategy was proposed to construct Pt 1 /Ce x Zr 1–x O 2 catalysts with a tunable Pt-CeO 2 interaction strength and Pt–O–Ce coordination environment. According to the results of systematic characterizations, Pt species supported on Ce x Zr 1–x O 2 were mainly in the form of single atoms when x ≥ 0.7, and the strength of the Pt-CeO 2 interaction and the coordination number of Pt–O–Ce bond (CN Pt–O–Ce ) on Pt 1 /Ce x Zr 1–x O 2 showed a volcanic change as a function of the ZrO 2 doping amount. Here, it was proposed that the balance between the reasonable concentration of oxygen defects and limited surface Zr–O x species well accounted for the strongest Pt-CeO 2 interaction and the highest CN Pt–O–Ce on Pt/Ce 0.9 Zr 0.1 O 2 . It was observed that the Pt/Ce 0.9 Zr 0.1 O 2 catalyst exhibited much higher NH 3 oxidation activity than other Pt/Ce x Zr 1–x O 2 catalysts. The mechanism study revealed that the Pt 1 species with the stronger Pt-CeO 2 interaction and higher CN Pt–O–Ce within Pt/Ce 0.9 Zr 0.1 O 2 could better activate NH 3 adsorbed on Lewis acid sites to react with O 2 thus resulting in superior NH 3 oxidation activity. This work provides a new approach for designing highly efficient Pt/CeO 2 based catalysts for low-temperature NH 3 oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electron Transfer Going the Distance: Mn-Doped ZnSe as a Model Photocatalytic System

In this work, time-resolved photoluminescence and transient absorption spectroscopy are used to examine the influence that long excited state lifetimes of Mn-doped nanocrystals have on the mechanisms of photo-induced electron transfer (PET) in photocatalytic systems. Mn-doped ZnSe nanocrystals can undergo PET over their nearly millisecond excited state lifetime, which enables electron transfer to viologens in solution over large encounter distances in comparison to molecular length scales. The long excited state lifetimes also enable diffusion of the excited nanocrystals over hundreds of nanometers in solution, allowing them to react with molecular species at nanomolar concentrations. The ability to capture and sustain optical energy in spin-forbidden transitions among crystal field states of the Mn ions opens opportunities to explore the influence that long excited state lifetimes have on photocatalytic reaction mechanisms involving molecular species such as CO 2 that can be difficult to concentrate or attach to nanocrystal surfaces.

14 SOLAR ENERGY↗
DOE OSTI2024

Enhancing MnBi 2 Te 4 Stability by Doping

MnBi 2 Te 4 (MBT) is an intrinsically magnetic topological material that possesses unique properties due to the quantum Hall effect. However, the low Mn–Bi mixed antisite formation energy is detrimental to these properties as it alters the long-range magnetic ordering in the Mn layer. Therefore, it is crucial to destabilize the antisite defects in MBT while preserving the favorable electronic properties. Here, to this end, we utilized a screening approach to understand the role of dopants in the Mn and Bi sites. We find that Sc, Y, and La dopings prefer substitutions on the Bi site and significantly increase the Mn–Bi antisite defect formation energy. We find that the contribution from the empty s and d states of Sc, Y, and La around the Fermi level is insignificant. However, at the high concentration limit, the Bi–Te octahedra are significantly modified with doping, leading to important changes in the band structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spectral Signatures of a Negative Polaron in a Doped Polymer Semiconductor: Energy Levels and Hubbard U Interactions

The modern picture of negative charge carriers on conjugated polymers invokes the formation of a singly occupied (spin-up/spin-down) level within the polymer gap and a corresponding unoccupied level above the polymer conduction band edge. The energy splitting between these sublevels is related to on-site Coulomb interactions between electrons, commonly termed Hubbard U. However, spectral evidence for both sublevels and experimental access to the U value is still missing. Here, in this work, we provide evidence by n-doping the polymer P(NDI 2 OD-T 2 ) with [RhCp*Cp] 2 , [N-DMBI] 2 , and cesium. Changes in the electronic structure after doping are studied with ultraviolet photoelectron and low-energy inverse photoemission spectroscopies (UPS, LEIPES). UPS data show an additional density of states (DOS) in the former empty polymer gap while LEIPES data show an additional DOS above the conduction band edge. These DOS are assigned to the singly occupied and unoccupied sublevels, allowing determination of a U value of ~1 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quasiparticle and Optical Properties of Carrier-Doped Monolayer MoTe 2 from First Principles

The intrinsic weak and highly nonlocal dielectric screening of two-dimensional materials is well-known to lead to high sensitivity of their optoelectronic properties to environment. Less studied theoretically is the role of free carriers in those properties. In this report we use ab initio GW and Bethe-Salpeter equation calculations, with a rigorous treatment of dynamical screening and local-field effects, to study the doping dependence of the quasiparticle and optical properties of a monolayer transition-metal dichalcogenide, 2H MoTe 2 . Here we predict a quasiparticle band gap renormalization of several hundreds of meV for experimentally attainable carrier densities and a similarly sizable decrease in the exciton binding energy. This results in an almost constant excitation energy for the lowest-energy exciton resonance with an increasing doping density. Using a newly developed and generally applicable plasmon-pole model and a self-consistent solution of the Bethe-Salpeter equation, we reveal the importance of accurately capturing both dynamical and local-field effects to understand detailed photoluminescence measurements.

2D material↗
DOE OSTI2022

Electron Doping-Induced Metal–Insulator Transition in LaNiO 3 and Memory Devices

LaNiO 3 (LNO) is the only rare-earth nickelate that does not undergo a temperature-driven insulator-metal transition. Here, we report the successful deposition of epitaxial LNO thin films on LaAlO 3 substrates by a chemical solution deposition method. We report a metal-insulator transition driven by electron doping from hydrogen using catalytic Pd electrodes. A series of in-plane devices with LNO thin films and Pd-Au as the two working terminals were designed and fabricated by photolithography. Further, we report their resistance switching behavior and synaptic multiresistance states under voltage pulses. The results demonstrate the universality of electron doping-driven phase transitions in the rare-earth nickelates and their relevance to emerging memory and computing technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

One-Step Facile Synthesis of High-Activity Nitrogen-Doped PtNiN Oxygen Reduction Catalyst

PtM alloy electrocatalysts (M = Fe, Co, Ni) have been the subject of many investigations aimed at increasing their attractive properties, in particular oxygen reduction reaction (ORR) activity, while reducing total platinum-group-metal content and improving durability. Despite some success, these catalysts still have relatively high Pt content and lack the necessary durability as M metals leach out from the alloys during potential cycling. Previously, we synthesized nitrogen (N)-doped PtMN/C catalysts consisting of thin Pt shells on M nitride cores by a two-step method, which showed higher ORR activity and stability than their PtM counterparts. In the present work, we developed a facile one-step synthesis method, which comprises a single thermal annealing process of the N-doped PtNiN/C alloy. The ORR performance of the one-step synthesized PtNiN/C catalyst is much higher than that of the two-step synthesized PtNiN/C, as revealed by rotating disk electrode measurements. Membrane electrode assembly fuel cell testing demonstrated superb durability and high activity. Formation of Pt monolayer shells on the nitrided (Pt x Ni 1-x ) 4 N cores was confirmed by in situ X-ray absorption spectroscopy. The origins of the enhanced activity and stability of the one-step synthesized PtNiN/C catalyst are elucidated based on density functional theory calculations together with the experimental results.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Calcium-Doped High-Voltage Spinel Cathode for Long Cycle Life Lithium-Ion Batteries

With the promises of low cost, high operating voltage, and excellent rate capability, the high-voltage spinel material with the formula of LiNi 0.5 Mn 1.5 O 4 (LNMO) has been considered as one of the most promising cathode materials for nextgeneration lithium-ion batteries (LIBs). However, the adoption of LNMO into practical LIBs is greatly hindered due to its rapid capacity decay associated with its bulk structural instability and interfacial side reactions. To address these issues, we proposed to use the cost-effective calcium (Ca) element as a dopant to stabilize the oxygen framework and surface of the LNMO crystal. The experimental results showed that, with moderate Ca doping, the obtained cathode (Ca 0.05 LNMO) retained a specific capacity of ∼121 mAh/g (∼94.4% capacity retention) after 500 cycles at 0.5 C, compared to ∼73% for the baseline bare sample. Furthermore, the Ca 0.05 LNMO cathode retained ∼84% of its initial capacity, vs the baseline with ∼69%, after 150 cycles at the high temperature of 55 °C. The excellent battery performance of the moderately Ca-doped LNMO cathode is ascribed to its structural and kinetic advantages.

25 ENERGY STORAGE↗
DOE OSTI2020

Iron-Doped Sodium Vanadium Oxyflurophosphate Cathodes for Sodium-Ion Batteries—Electrochemical Characterization and In Situ Measurements of Heat Generation

Sodium-ion batteries (NaIBs) are increasingly being envisioned for grid-scale energy-storage systems because of cost advantages. However, implementation of this vision has been challenged by the low-energy densities delivered by most NaIB cathodes. Toward addressing this challenge, the authors report the synthesis and characterization of a new iron-doped Na 3 Fe 0.3 V 1.7 O(PO 4 ) 2 F 2 cathode using a novel facile hydrothermal route. The synthesized material was characterized using scanning electron microscopy, X-ray diffraction, and Mössbauer spectroscopy techniques. The obtained discharge capacity in the half-cell configuration lies from 119 to 125 to 130 mA h/g at C/10 while tested using three different electrolyte formulations, dimethyl carbonate–ethylene carbonate (EC)–propylene carbonate (PC), diethyl carbonate–EC, and EC–PC, respectively. The synthesized cathodes were also evaluated in full-cell configurations, which delivered an initial discharge capacity of 80 mA h/g with NaTi 2 (PO 4 ) 3 MWCNT as the anode. Ionic diffusivity and interfacial charge transfer kinetics were also evaluated as a function of temperature and sodium concentration, which revealed that electrochemical rate performances in this material were limited by charge-transfer kinetics. To understand the heat generation mechanism of the Na/Na 3 Fe 0.3 V 1.7 O(PO 4 ) 2 F 2 half-cell during charge and discharge processes, an electrochemical isothermal calorimetry measurement was carried out at different current rates for two different temperatures (25 and 45 °C). The results showed that the amount of heat generated was strongly affected by the operating charge/discharge state, C-rate, and temperature. Altogether, this work provides a new synthesis route for the development of iron-doped Na 3 Fe 0.3 V 1.7 O(PO 4 ) 2 F 2 -based high-performance sodium cathode materials aimed at providing a viable pathway for the development and deployment of large-scale energy-storage based on sodium battery systems.

25 ENERGY STORAGE↗
DOE OSTI2021

Constructing Ultrathin W-Doped NiFe Nanosheets via Facile Electrosynthesis as Bifunctional Electrocatalysts for Efficient Water Splitting

Exploring cost-effective and efficient bifunctional electrocatalysts via simple fabrication strategies is strongly desired for practical water splitting. Herein, an easy and fast one-step electrodeposition process is developed to fabricate W-doped NiFe (NiFeW)-layered double hydroxides with ultrathin nanosheet features at room temperature and ambient pressure as bifunctional catalysts for water splitting. Notably, the NiFeW nanosheets require overpotentials of only 239 and 115 mV for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively, to reach a current density of 10 mA/cm 2 in alkaline media. Their exceptional performance is further demonstrated in a full electrolyzer configuration with the NiFeW as both anode and cathode catalysts, which achieves a low cell voltage of 1.59 V at 10 mA/cm 2 , 110 mV lower than that of the commercial IrO 2 (anode) and Pt (cathode) catalysts. Moreover, the NiFeW nanosheets are superior to various recently reported bifunctional electrocatalysts. Such remarkable performances mainly ascribe to W doping, which not only effectively modulates the electrocatalyst morphology but also engineers the electronic structure of NiFe hydroxides to boost charge-transfer kinetics for both the OER and HER. Hence, the ultrathin NiFeW nanosheets with an efficient fabrication strategy are promising as bifunctional electrodes for alkaline water electrolyzers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating

While lithium, manganese-rich (LMR) layered oxide cathode materials offer high energy density (>900 Wh kg –1 ) and low cost, LMR is susceptible to continuous capacity and voltage decay from the oxygen migration and side reaction with aqueous electrolyte at high voltage. Herein, the integration of Na/F co-doping (CD) and AlF 3 coating on LMR is achieved without the need of complex atomic layer deposition. Akin to pristine and CD samples, CD with 1 wt % AlF 3 (CD-1.0 wt %) shows excellent electrochemical performance with the capacity and voltage retentions of 93 and 91% after 150 cycles at 0.5C, respectively, and increased ionic conductivity. Spectroscopic analysis indicates that the coating mainly influences the Co distribution, where Co is enriched on the surface, and partial diffusion of Al 3+ ions toward the bulk, leading to a slight change of transition-metal (TM) valence states at the nanometer scale and the formation of a stable Li x (CoAl)O y phase. Post-cycling analysis reveals that CD-1.0 wt % can alleviate the formation of rock-salt structure and Mn dissolution. Besides, little to no metal segregation is detected for the cycled CD-1.0 wt % sample. This finding presents the first instance to apply co-doping and AlF 3 coating as a new strategy to enhance the structural homogeneity and takes another step toward their commercial viability.

25 ENERGY STORAGE↗