Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISULFIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Crystal Orientation Independent Strong TERS Response in Anisotropic ReS2 on Gold

Rhenium disulfide (ReS2) crystallizes in a distorted 1T' lattice with triclinic symmetry arising from Re–Re dimerization, which produces in-plane anisotropic properties and a dense set of Raman-active modes with mixed atomic displacements. Unlike far-field Raman spectroscopy, which shows strong polarization and orientation dependence, tip-enhanced Raman spectroscopy (TERS) probes out-of-plane Raman tensor components. Here we use 785 nm (1.58 eV) gap-mode TERS to investigate monolayer to four-layer thick ReS2 crystals.. TERS maps and averaged spectra reveal that all modes remain invariant under 90° rotation of the crystal, and the only thickness-dependent feature is the emergence of the multilayer breathing mode. These results demonstrate that TERS yields a crystal-orientation-independent Raman response in ReS2 and provides direct access to Raman tensor components that are not easily accessible in conventional far-field measurements.

Valencia Acuna, Pavel A.↗

Organic sulfur from source to sink in low‐sulfate Lake Superior

Abstract Organic sulfur plays a crucial role in the biogeochemistry of aquatic sediments, especially in low sulfate (< 500 μ M) environments like freshwater lakes and the Earth's early oceans. To better understand organic sulfur cycling in these systems, we followed organic sulfur in the sulfate‐poor (< 40 μ M) iron‐rich (30–80 μ M) sediments of Lake Superior from source to sink. We identified microbial populations with shotgun metagenomic sequencing and characterized geochemical species in porewater and solid phases. In anoxic sediments, we found an active sulfur cycle fueled primarily by oxidized organic sulfur. Sediment incubations indicated a microbial capacity to hydrolyze sulfonates, sulfate esters, and sulfonic acids to sulfate. Gene abundances for dissimilatory sulfate reduction ( dsrAB ) increased with depth and coincided with sulfide maxima. Despite these indicators of sulfide formation, sulfide concentrations remain low (< 40 nM) due to both pyritization and organic matter sulfurization. Immediately below the oxycline, pyrite accounted for 13% of total sedimentary sulfur. Both free and intact lipids in this same interval accumulated disulfides, indicating rapid sulfurization even at low concentrations of sulfide. Our investigation revealed a new model of sulfur cycling in a low‐sulfate environment that likely extends to other modern lakes and possibly the ancient ocean, with organic sulfur both fueling sulfate reduction and consuming the resultant sulfide.

Phillips, Alexandra A.↗

Evaluating sulfurization as a blue carbon sink in a southern California salt marsh

Blue carbon ecosystems such as seagrass meadows, mangrove forests, and salt marshes are important carbon sinks that can store carbon for millennia. Recently, organic matter sulfurization and pyritization have been proposed as mechanisms of net carbon storage in blue carbon ecosystems. At our study site, organic sulfur that is resistant to acid hydrolysis (protokerogen) is an order of magnitude less abundant than pyrite sulfur, suggesting a dominance of pyritization over sulfurization. The C/N ratios and carbon isotope compositions suggest that nearly half of total organic carbon and ≥ 80% of protokerogen is composed of marsh plant material. Sediment protokerogen appears to be sulfurized based on its low δ 34 S values (− 10‰), abundance of disulfides, and higher S/C ratio (~ 1.0%) relative to potential biogenic sulfur sources. However, the interpretation of protokerogen δ 34 S values is complicated by the wide range in sulfur isotope compositions of marsh plants. Evidence for sulfurization occurs within the shallowest sediments across different vegetation zones, yielding consistent products, while pyritization appears to be more sensitive to alterations in sediment redox conditions. Based on organic sulfur and pyrite content, sulfurization may be a more spatially consistent process than pyritization, with implications for carbon storage. The relative abundance of pyrite and protokerogen organic sulfur indicates that pyritization is favored at our study site, but this is likely to vary across the spectrum of blue carbon ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Determining sulfur speciation in oxidatively crosslinked degradable polymers using sulfur K-edge X-ray absorption spectroscopy

A new family of water-degradable elastic polymers prepared by oxidative crosslinking of the parent polythionolactones shows promise in a broad range of applications, but the compositions of these materials elude conventional analytical methods. Here, in this work, we use sulfur K-edge X-ray absorption spectroscopy to quantify the amounts of thioether, disulfide, sulfone, sulfate ester, and thionoester in each polymer and to rule out the presence of several other functional groups, including sulfonate, thiosulfonate, sulfate, and sulfoxide. We rationalize this speciation as a function of linker flexibility in the context of sulfinyl cycloaddition reactions and propose a mechanism of aggregation for the oxidized polymers. Our results correlate with swelling ratios but not with porosity nor crosslink density measurements, demonstrating the importance of pairing mechanical and chemical techniques when characterizing heterogeneous organic polymers. Finally, we take advantage of the proximity of the gold M 4,5 -edges to the sulfur K-edge to analyze the binding and reactivity of Au(III) with the crosslinked polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unusual modifications of protein biomarkers expressed by plasmid, prophage, and bacterial host of pathogenic Escherichia coli identified using top‐down proteomic analysis

Rationale Pathogenic bacteria often carry prophage (bacterial viruses) and plasmids (small circular pieces of DNA) that may harbor toxin, antibacterial, and antibiotic resistance genes. Proteomic characterization of pathogenic bacteria should include the identification of host proteins and proteins produced by prophage and plasmid genomes. Methods Protein biomarkers of two strains of Shiga toxin–producingEscherichia coli(STEC) were identified using antibiotic induction, matrix‐assisted laser desorption/ionization tandem time‐of‐flight (MALDI‐TOF‐TOF) tandem mass spectrometry (MS/MS) with post‐source decay (PSD), top‐down proteomic (TDP) analysis, and plasmid sequencing. Alphafold2 was also used to compare predicted in silico structures of the identified proteins to prominent fragment ions generated using MS/MS‐PSD. Strain samples were also analyzed with and without chemical reduction treatment to detect the attachment of pendant groups bound by thioester or disulfide bonds. Results Shiga toxin was detected and/or identified in both STEC strains. For the first time, we also identified the osmotically inducible protein (OsmY) whose sequence unexpectedly had two forms: a full and a truncated sequence. The truncated OsmY terminates in the middle of an α‐helix as determined by Alphafold2. A plasmid‐encoded colicin immunity protein was also identified with and without attachment of an unidentified cysteine‐bound pendant group (~307 Da). Plasmid sequencing confirmed top‐down analysis and the identification of a promoter upstream of the immunity gene that is activated by antibiotic induction, that is, SOS box. Conclusions TDP analysis, coupled with other techniques (e.g., antibiotic induction, chemical reduction, plasmid sequencing, and in silico protein modeling), is a powerful tool to identify proteins (and their modifications), including prophage‐ and plasmid‐encoded proteins, produced by pathogenic microorganisms.

Biochemistry & Molecular Biology↗

Covalently-Bonded Laminar Assembly of Van der Waals Semiconductors with Polymers: Toward High-Performance Flexible Devices

Van der Waals semiconductors (vdWS) offer superior mechanical and electrical properties and are promising for flexible microelectronics when combined with polymer substrates. However, the self-passivated vdWS surfaces and their weak adhesion to polymers tend to cause interfacial sliding and wrinkling, and thus, are still challenging the reliability of vdWS-based flexible devices. Here, in this study, an effective covalent vdWS–polymer lamination method with high stretch tolerance and excellent electronic performance is reported. Using molybdenum disulfide (MoS 2 ) and polydimethylsiloxane (PDMS) as a case study, gold–chalcogen bonding and mercapto silane bridges are leveraged. The resulting composite structures exhibit more uniform and stronger interfacial adhesion. This enhanced coupling also enables the observation of a theoretically predicted tension-induced band structure transition in MoS 2 . Moreover, no obvious degradation in the devices’ structural and electrical properties is identified after numerous mechanical cycle tests. This high-quality lamination enhances the reliability of vdWS-based flexible microelectronics, accelerating their practical applications in biomedical research and consumer electronics.

36 MATERIALS SCIENCE↗

Redox Chemical‐Fueled Dissipative Self‐Assembly of Active Materials

Abstract This work reports a new transient self‐assembly of active materials fueled solely by a mild redox reaction network. Fuel‐driven dissipative, out‐of‐equilibrium assemblies are common in living systems but are challenging to mimic synthetically. Synthetic dissipative assembly systems developed thus far often use relatively toxic fuels and harsh conditions. Herein we report a transient, out‐of‐equilibrium self‐assembly system based on a new chemical reaction network using redox reactions. We use a mild redox chemical reaction network to simultaneously create and destroy a disulfide‐based hydrogelator, leading to transient, dynamic behavior. By closely regulating the reaction kinetics and reagent composition, the macroscopic properties of the active materials are fine‐tuned. The current work represents an important step toward the development of active materials operating under mild conditions.

Ogden, William A.↗

Synthesis, Crystal and Electronic Structure of La 2 SiP 4

La 2 SiP 4 (mP-28, Z=4, Wyckoff sequence e 7 , space group P2 1 /c (No. 14), a=10.8230(6) Å, b=7.5208(4) Å, c=7.9189(4) Å, and β=105.389(2)°) which crystallizes in the La 2 CuS 4 structure type is reported here. Instead of isolated CuS 3 triangles bridged by disulfide anions, in the crystal structure of La 2 SiP 4 , one-dimensional zig-zag chains composed of SiP 4 tetrahedra connected by P–P bonds are present. Lanthanum cations fill the voids between the chains and are coordinated by either 9P or 8P+Si atoms. La2SiP4 is a narrow bandgap semiconductor with calculated and measured optical bandgaps of 0.35 eV and 0.85(1) eV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization and structural analysis of a thermophilic GH11 xylanase from compost metatranscriptome

Xylanase is efficient for xylan degradation and widely applied in industries. We found a GH11 family xylanase (Xyn11A) with high thermostability and catalytic activity from compost metatranscriptome. This xylanase has the optimal reaction temperature at 80 °C with the activity of 2907.3 U/mg. The X-ray crystallographic structure shows a typical “right hand” architecture, which is the characteristics of the GH11 family enzymes. Comparing it with the mesophilic XYN II, a well-studied GH11 xylanase from Trichoderma reesei, Xyn11A is more compact with more H-bonds. Our mutagenic results show that the electrostatic interactions in the thumb and palm region of Xyn11A could result in its high thermostability and activity. Introducing a disulfide bond at the N-terminus further increased its optimal reaction temperature to 90 °C with augmented activity.

59 BASIC BIOLOGICAL SCIENCES↗

Crystal structure of yeast Sco1

The Sco family of proteins are involved in the assembly of the dinuclear CuA site in cytochrome c oxidase (COX), the terminal enzyme in aerobic respiration. These proteins, which are found in both eukaryotes and prokaryotes, are characterized by a conserved CXXXC sequence motif that binds copper ions and that has also been proposed to perform a thiol:disulfide oxidoreductase function. The crystal structures of Saccharomyces cerevisiae apo Sco1 (apo-ySco1) and Sco1 in the presence of copper ions (Cu-ySco1) were determined to 1.8- and 2.3-{angstrom} resolutions, respectively. Yeast Sco1 exhibits a thioredoxin-like fold, similar to that observed for human Sco1 and a homolog from Bacillus subtilis. The Cu-ySco1 structure, obtained by soaking apo-ySco1 crystals in copper ions, reveals an unexpected copper-binding site involving Cys181 and Cys216, cysteine residues present in ySco1 but not in other homologs. The conserved CXXXC cysteines, Cys148 and Cys152, can undergo redox chemistry in the crystal. An essential histidine residue, His239, is located on a highly flexible loop, denoted the Sco loop, and can adopt positions proximal to both pairs of cysteines. Interactions between ySco1 and its partner proteins yeast Cox17 and yeast COX2 are likely to occur via complementary electrostatic surfaces. This high-resolution model of a eukaryotic Sco protein provides new insight into Sco copper binding and function.

36 MATERIALS SCIENCE↗

Improving the Lubricity of Extended Reach Well Drilling Equipment Using Non-Fluorescent Extreme Pressure Cationic Lubricants

In this study, non-fluorescent cationic extreme pressure lubricant JDLUB-1 was prepared to improve the lubricity for extended reach well drilling. The lubricant was mainly composed of synthetic base oil, oil-soluble and spherical nano-silica, sulfur-phosphorus-molybdenum anti-friction and anti-extreme pressure additives. The mixture was emulsified with primary emulsifier cycloalkane group condensed fatty amines and a fatty alcohol polyoxyethylene ether co-emulsifier. The fluorescence level did not exceed 4, satisfying the standard requirements. The properties including extreme pressure lubrication, temperature resistance and compatibility with conventional drilling fluid additives were evaluated. The results indicated that the extreme pressure lubricity coefficient could reach 0.0283 after addition of JDLUB-1. Meanwhile, the product was stable at high temperature of 130 °C, and compatible with common additives. The lubricity mechanism of JDLUB-1 was investigated by measuring the zeta potential, particle size distribution, adsorption, and anti-wear evaluation at extreme pressure. The results indicated that the positively charged lubricant oil droplets could be actively adsorbed onto the surface of N80 steel casing coupon. An adsorption film composed of oil soluble and spherical nano-silica and sulfur-phosphorus-molybdenum compounds was formed with a low melting point and low shear strength. During friction, the formation of molybdenum disulfide film leads to repair of the metal surface and formation of a stable sliding friction between the drill string and the wellbore with a low friction coefficient. The JDLUB-1 lubricant was successfully applied in several high-angle deviated wells and extended reach wells in Jidong oilfield (China). The results demonstrated that JDLUB-1 could effectively reduce torque and drag and show potential field application in the future.

36 MATERIALS SCIENCE↗

Structural, Vibrational, and Magnetic Properties of MoS{sub 2}/Cr{sub 2}O{sub 3} Composites Synthesized by the Solid-State Technique

(1− x) Cr{sub 2}O{sub 3}/x MoS{sub 2} (x = 0.25, 0.5, 0.75) were synthesized using the powder solid-state route. The structural, morphological, vibrational, and magnetic properties of the as-prepared MoS{sub 2}/Cr{sub 2}O{sub 3} samples with different Cr{sub 2}O{sub 3} contents have been studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy, Raman spectroscopy, and vibrating sample magnetometry (VSM), respectively. The X-ray diffraction results show the presence of the parent compounds (molybdenum disulfide (MoS{sub 2}) and chromium oxide (Cr{sub 2}O{sub 3})) in addition to a secondary phase corresponding to chromium molybdenite Cr{sub 2}Mo{sub 3}O{sub 12}. Raman and IR spectra were recorded, and the observed modes were analyzed and assigned to different normal modes of vibration. Magnetic characterizations revealed that all the series MoS{sub 2}/Cr{sub 2}O{sub 3} composites possess paramagnetic characteristics both at room temperature and at 30 K. Further, the maximum of magnetization increased with the increase of Cr{sub 2}O{sub 3} content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-sensitive surface plasmon resonance biosensor based on MoS{sub 2}–graphene hybrid nanostructure with silver metal layer

The optical biosensors based on the plasmonic technology are an important research item in the field of biophotonics. The graphene–molybdenum disulfide (MoS{sub 2}) based hybrid structures are very effective in designing and fabricating of the sensitive optical biosensors. In this paper, we propose a nanostructure Ag/MoS{sub 2}/graphene as an optical biosensor with high performance and sensitivity. The proposed configuration for this surface plasmon resonance (SPR) optical biosensor is Kretschmann. Herein, the enhancement of sensitivity for the proposed SPR optical biosensor is investigated in different states. By determining of the numbers of MoS{sub 2} layer and the thickness of the metal layer, we increased the sensitivity of the proposed biosensor. The maximum sensitivity ~ 190°/RIU is achieved. For this ultra-sensitive SPR biosensor with maximum sensitivity, the numbers of MoS{sub 2} and graphene layer is 2 and the resonance wavelength is determined 680 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improvement of the performance parameters of the surface plasmon resonance biosensor using Al{sub 2}O{sub 3} and WS{sub 2}

Here, proposed Kretschmann configuration based surface plasmon resonance biosensor shows immense improvement in its performance parameters. This highly sensitive biosensor provides a higher value of quality factor and detection accuracy. We presented a five-layer model of a biosensor with two dimensional transition metal di-chalcogenides Tungsten disulfide (WS2) in addition with Al2O3 layer. By using one layer of WS2 with six layers of Al2O3, the highest sensitivity (227.5 °/RIU), detection accuracy (1.1123), and quality factor (28.26 RIU{sup −1}) can be achieved. CaF2 as coupling prism has also played a remarkable role in enhancing the performance parameters for its low refractive index.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Linking Friction Scales from Nano to Macro via Avalanches

Abstract Steady-state fluctuations in the friction force of molybdenum disulfide (MoS 2 ), a prototypical lamellar solid, were analyzed experimentally for newton-scale forces and computationally via molecular dynamics simulations for nanonewton-scale forces. A mean field model links the statics and the dynamics of the friction behavior across these eight orders of magnitude in friction force and six orders of magnitude in friction force fluctuations (i.e., avalanches). Both the statistics and dynamics of the avalanches match model predictions, indicating that friction can be characterized as a series of avalanches with properties that are predictable over a wide range of scales.

Salners, Tyler (ORCID:0000000332647944)↗

Quality Control Metrics to Assess MoS2 Sputtered Films for Tribological Applications

Abstract Pure molybdenum disulfide (MoS 2 ) solid lubricant coatings could attain densities comparable to doped films (and the associated benefits to wear rate and environmental stability) through manipulation of the microstructure via deposition parameters. Unfortunately, pure films can exhibit highly variable microstructures and mechanical properties due to processes that are not controlled during deposition (i.e., batch-to-batch variation). This work focuses on developing a relationship between density, hardness, friction, and wear for pure sputtered MoS 2 coatings. Results show that dense films ( ρ = 4.5 g/cm 3 ) exhibit a 100 × lower wear rate compared to porous coatings ( ρ = 3.04–3.55 g/cm 3 ). The tribological performance of high density pure MoS 2 coatings is shown to surpass that of established composite coatings, achieving a wear rate 2 × ( k = 5.74 × 10 –8 mm 3 /Nm) lower than composite MoS 2 /Sb 2 O 3 /Au in inert environments.

Babuska, Tomas F.↗