SEARCH · Engineering Papers
Results for “DETAIL”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Structures of Streptococcus pyogenes class A sortase in complex with substrate and product mimics provide key details of target recognition
Not Available
Detailed life cycle assessment of Bounty® paper towel operations in the United States
Not Available
An adaptive high-order hybrid scheme for compressive, viscous flows with detailed chemistry
Explore the source record for details and available documents.
Detailed finite element method modeling of evaporating multi-component droplets
The evaporation of sessile multi-component droplets is modeled with an axisymmetic finite element method. The model comprises the coupled processes of mixture evaporation, multi-component flow with composition-dependent fluid properties and thermal effects. Based on representative examples of water–glycerol and water–ethanol droplets, regular and chaotic examples of solutal Marangoni flows are discussed. Furthermore, the relevance of the substrate thickness for the evaporative cooling of volatile binary mixture droplets is pointed out. It is shown how the evaporation of the more volatile component can drastically decrease the interface temperature, so that ambient vapor of the less volatile component condenses on the droplet. Finally, results of this model are compared with corresponding results of a lubrication theory model, showing that the application of lubrication theory can cause considerable errors even for moderate contact angles of 40°. - Graphical abstract:.
Influence of weld details on fracture behavior of connections using high-strength steel
Not Available
Fission gas trapped in Chornobyl fuel microparticles reveals details of reactor operations
The isotopic ratios of fission gas would provide important source information of a nuclear fuel sample found in the environment. However, it is believed that during a reactor accident like Chornobyl all fission gas is lost and that the radioactive particles found in the Chornobyl Exclusion Zone today are depleted in gases by the initial explosion and subsequent fire. We disprove this hypothesis by detection and analysis of trapped krypton and xenon in these particles. Our analysis of krypton and xenon isotopes by noble gas mass spectroscopy in combination with resonance ionization mass spectrometry establishes that important information about reactor operations like age, neutron flux and plutonium fission fraction can still be reconstructed from individual micrometer-sized particles even after decades of weathering in the environment.
The Structure of the Biofilm-controlling Response Regulator BfmR from Acinetobacter baumannii Reveals Details of Its DNA-binding Mechanism
The rise of drug-resistant bacterial infections coupled with decreasing antibiotic efficacy poses a significant challenge to global health care. Acinetobacter baumannii is an insidious, emerging bacterial pathogen responsible for severe nosocomial infections aided by its ability to form biofilms. The response regulator BfmR, from the BfmR/S two-component system, is the master regulator of biofilm initiation in A. baumannii and is a tractable therapeutic target. Here we present the structure of A. baumannii BfmR using a hybrid approach combining X-ray crystallography, nuclear magnetic resonance spectroscopy, chemical crosslinking mass spectrometry, and molecular modeling. We also show that BfmR binds the previously proposed bfmRS promoter sequence with moderate affinity. We report that while BfmR shares many traits with other OmpR/PhoB family response regulators, some unusual properties were observed. Most importantly, we observe that when phosphorylated, BfmR binds this promoter sequence with a lower affinity than when not phosphorylated. All other OmpR/PhoB family members studied to date show an increase in DNA-binding affinity upon phosphorylation. Understanding the structural and biochemical mecha
Detailed study of the magnetic ordering in FeMnP{sub 0.75}Si{sub 0.25}
Magnetic and crystallographic properties of FeMnP{sub 0.75}Si{sub 0.25} in the hexagonal Fe{sub 2}P-type structure have been investigated by X-ray powder diffraction, neutron powder diffraction and magnetic measurements. The room temperature diffractograms reveal co-existence of two distinct structural phases in the samples with small, but significant, differences only in the unit cell dimensions. The volume ratio between the two phases is governed by the annealing conditions. One of the phases orders ferromagnetically (T{sub C}=250 K) and the other in an incommensurate antiferromagnetic structure at low temperatures (q{sub x}=0.363(1), T{sub N}=150 K). - Graphical abstract: The ferromagnetic structure of sample I (a) and the antiferromagnetic and incommensurate (q{sub x}=0.363(1)) low temperature structure of sample II (b). The magnetic moments of the Mn and Fe atoms in (b) are aligned in the basal plane along the a- and the b-axis, respectively, and the amplitude of the moments propagates sinusoidally along the a-axis. - Highlights: • Magnetic and crystallographic properties of FeMnP{sub 0.75}Si{sub 0.25} have been investigated. • Co-existing ferro- and antiferromagnetic ordering arise from two phases of Fe{sub 2}P-type. • A low temperature incommensurate antiferromagnetic structure is revealed.
Crystal structure details of La- and Bi-substituted hydroxyapatites: Evidence for LaO{sup +} and BiO{sup +} with a very short metal–oxygen bond
Crystal structures of substituted apatites with general formula Ca{sub 10−x}M{sub x}(PO{sub 4}){sub 6}(OH{sub 1−δ}){sub 2−x}O{sub x}, where M=La, Bi, 0≤x<2, were refined using high-resolution X-ray powder diffraction patterns. Individual positions for Ca{sup 2+} and M{sup 3+}-ions localized near Ca2-site were determined. The M{sup 3+}-ion was found shifted toward the hexagonal channel center with respect to the Ca{sup 2+}-ion, forming very short bond with the intrachannel O{sup 2−}, while leaving considerably longer distances to other oxygen atoms, which suggested the existence of a MO{sup +} ion. Distinct bands of stretching M–O modes were observed in the Raman and FT-IR spectra of the compounds. The bond lengths for BiO{sup +} and LaO{sup +} were estimated to be 2.05(1) and 2.09(1) Å correspondingly. The latter was almost 0.3 Å lower than the shortest La–O bond in La{sub 2}O{sub 3}. The realization of such a strong lanthanide–oxygen bond in a crystal lattice could provide a very high axial ligand field and might be implemented to develop high-energy-barrier single-molecule magnets as well as to tune properties of lanthanide-based luminophores. - Graphical abstract: A fragment of the La-for-Ca substituted apatite crystal structure focusing on the La–O bond. - Highlights: • Individual positions in the apatite crystal lattice for a doping atom (La, Bi) and Ca. • The doping atom shifts toward the center of the hexagonal channel. • BiO{sup +} and LaO{sup +} with estimated short bond lengths of 2.05 and 2.09 Å respectively.
A detailed investigation on the impact of post-growth annealing on the materials and device characteristics of 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping
Highlights: ► We investigated the effect of ex situ annealing on InGaAs/GaAs QDIP with InAlGaAs layer. ► As-grown defect was removed by using post-growth annealing treatment. ► Increase in the compressive strain due to annealing is calculated from XRD curve. ► Three-fold enhancement in responsivity is observed in the QDIPs annealed at 650 °C. ► Two-fold enhancement in D* is observed sample annealed at 650 °C compared to as grown. -- Abstract: The effect of post-growth rapid thermal annealing on 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector (QDIP) with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping has been investigated. Transmission electron microscopy showed some as-grown defects were removed by post growth annealing treatment. An increase in the compressive strain in the heterostructure due to annealing was identified from X-ray diffraction curve. A two-color photoresponse in the long-wave region (8.5 and 10.2 μm) was observed in both as-grown device and those annealed at 650 °C temperature. A three-fold enhancement in peak responsivity was observed in the QDIPs annealed at 650 °C (1.19 A/W) compared to that in the as-grown (0.34 A/W). Detectivity also increased by two fold from as-grown to 650 °C annealed device. The changes are attributed to the removal of as-grown defects and dislocations during epitaxial growth. These removals changed the confinement potential profile, which resulted in an improvement in the detectivity and responsivity of the annealed sample.
A detailed examination of the growth of CdSe thin films through structural and optical characterization
Highlights: ► Urbach tail width decreases by about 200 meV with the film thickness. ► A coefficient of strain of around 3 × 10{sup −3} along [0 0 2] axis was predicted. ► Compressive strain gives rise to about 11 meV red shift in the band gap energy. ► A relative shift of about 2 cm{sup −1} of LO{sub 1} phonon mode in Raman spectra was observed between different thickness films. - Abstract: Different thickness CdSe thin films were grown on glass substrates by physical vapor deposition and characterized by optical and structural investigations. Urbach energy related to the width of the optical absorption tail decreases from 430 meV for a film thickness of 50 nm to 200 meV for 450 nm. The film thickness dependent grain sizes were estimated by using effective mass model under quantum size effect from the shift of around 500 meV in the asymptotic absorption edge. The X-ray diffraction (XRD) pattern is consistent with CdSe hexagonal crystal structure which indicates crystal growth mode along c axis. XRD peaks broaden and shift depending on film thicknesses which are presumably due to strain and size effect. We observe both blue and red shift depending on thickness in Longitudinal Optical phonon frequency in Raman spectra with respect to that of the source CdSe powder which could also be due to strain on thin films and/or finite crystallite size. In this work we combine the results of optical absorption, Raman and XRD spectroscopies to study the evolution of grain size, strain and structural disorder depending on film thickness.
Phosphides or nitrides for better NLO properties? A detailed comparative study of alkali metal doped nano-cages
Highlights: • Alkali metal doped boron and aluminum phosphide nano-cages are evaluated for NLO properties. • The NLO response of phosphide nano-cages is compared with nitride nano-cages. • Phosphide nano-cages show better NLO properties than the corresponding nitride nano-cages. • Conductivity of doped nano-cages is much higher than pristine nano-cages. • MAl{sub 11}P{sub 12} and MB{sub 11}P{sub 12} show monotonic increase in hyperpolarizability with size of alkali metal. - Abstract: Phosphide nano-cages of MX{sub 12}P{sub 11} and MX{sub 11}P{sub 12} (where X = B or Al, M = Li, Na, K) are investigated theoretically for geometric, electronic and nonlinear optical (NLO) properties. Alkali metal is doped by replacing (a) aluminum or boron atom and (b) phosphorus atom. Alkali metal doping can remarkably alter the electronic and NLO properties of the nano-cages, regardless of doping site. HOMO-LUMO gap is decreased whereas first hyperpolarizability is enhanced significantly in doped AlP and BP nano-cages. PDOS (partial density of states) analysis suggests that diffuse excess electrons from alkali metal play important role in boosting NLO properties of phosphide nano-cages. TD-DFT calculations are performed to study the effect of alkali metal doping on absorption spectra. Red shift is observed in the UV–vis spectra of all considered nano-cages. Comparison of phosphide nano-cages with nitride nano-cages indicated that doping nitride nano-cages with alkali metal leads to greater hyperpolarizability and NLO response than doping phosphide nano-cages.
Detailed investigation of defect states in Erbium doped In2O3 thin films
Highlights: • SIMS analysis confirmed the doping of Er into the In{sub 2}O{sub 3} TF. • I–V loop analysis gives reduced current memory window for In{sub 2}O{sub 3}:Er TF based device. • High ideality factor was determined at low temperature and explained. • Defect related photoconductivity was confirmed from low temperature measurement. • 10 K temporal response of the Au/In{sub 2}O{sub 3}:Er/Si confirmed removal of oxygen defects. - Abstract: Erbium doped Indium Oxide (In{sub 2}O{sub 3}:Er) thin films (TFs) were synthesised by spin-on technique. Secondary Ion Mass Spectrometry confirmed that Er is incorporated into the In{sub 2}O{sub 3} lattice and formed an In-O-Er layer. The current–voltage loop produced a lower loop current window of ∼3.6 × 10{sup −4} A for In{sub 2}O{sub 3}:Er TF based devices. The Au/In{sub 2}O{sub 3}:Er/Si Schottky devices have lower ideality factor (∼6) and higher barrier height (∼0.63 eV) at 300 K than Au/In{sub 2}O{sub 3}/Si control samples. A blue shift in the main band-gap (∼50 nm) was calculated for In{sub 2}O{sub 3}:Er TFs from 10 K photoresponse. The Au/In{sub 2}O{sub 3}:Er/Si samples show higher photosensitivity in the temperature range 10 K–300 K and maximum (∼15 times) in the UV region at 10 K as compared to the Au/In{sub 2}O{sub 3}/Si devices. In addition, the Au/In{sub 2}O{sub 3}:Er/Si devices have better UV to visible cut-off ratio (∼3 times). Excellent temporal responses were recorded for Au/In{sub 2}O{sub 3}:Er/Si in the UV region as compared to Au/In{sub 2}O{sub 3}/Si.
A detailed evaluation of TomoDirect 3DCRT planning for whole-breast radiation therapy
The goal of this work was to develop planning strategies for whole-breast radiotherapy (WBRT) using TomoDirect three-dimensional conformal radiation therapy (TD-3DCRT) and to compare TD-3DCRT with conventional 3DCRT and TD intensity-modulated radiation therapy (TD-IMRT) to evaluate differences in WBRT plan quality. Computed tomography (CT) images of 10 women were used to generate 150 WBRT plans, varying in target structures, field width (FW), pitch, and number of beams. Effects on target and external maximum doses (EMD), organ-at-risk (OAR) doses, and treatment time were assessed for each parameter to establish an optimal planning technique. Using this technique, TD-3DCRT plans were generated and compared with TD-IMRT and standard 3DCRT plans. FW 5.0 cm with pitch = 0.250 cm significantly decreased EMD without increasing lung V20 Gy. Increasing number of beams from 2 to 6 and using an additional breast planning structure decreased EMD though increased lung V20 Gy. Changes in pitch had minimal effect on plan metrics. TD-3DCRT plans were subsequently generated using FW 5.0 cm, pitch = 0.250 cm, and 2 beams, with additional beams or planning structures added to decrease EMD when necessary. TD-3DCRT and TD-IMRT significantly decreased target maximum dose compared to standard 3DCRT. FW 5.0 cm with 2 to 6 beams or novel planning structures or both allow for TD-3DCRT WBRT plans with excellent target coverage and OAR doses. TD-3DCRT plans are comparable to plans generated using TD-IMRT and provide an alternative to conventional 3DCRT for WBRT.
Use of a combined cryo-EM and X-ray crystallography approach to reveal molecular details of bacterial pilus assembly by the chaperone/usher pathway
Many bacteria assemble hair-like fibers termed pili or fimbriae on their cell surface. These fibers mediate adhesion to various surfaces, including host cells, and play crucial roles in pathogenesis. Pili are polymers composed of thousands of individual subunit proteins. Understanding how these subunit proteins cross the bacterial envelope and correctly assemble at the cell surface is important not only for basic biology but also for the development of novel antimicrobial agents. The chaperone/usher pilus biogenesis pathway is one of the best-understood protein secretion systems, thanks largely to innovative efforts in biophysical techniques such as X-ray crystallography and cryo-electron microscopy. Such a combined approach holds promise for further elucidating remaining questions regarding the multi-step and highly dynamic pilus assembly process, as well as for studying other protein secretion and organelle biogenesis systems.