Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computational materials design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Reduced-Order Modeling Method for Phase-Change Thermal Energy Storage Heat Exchangers

Thermal energy storage can facilitate the effective utilization of renewable energy. To speed up the design process of thermal energy storage devices, it is critical to develop fast and accurate modeling methods for phase change material embedded heat exchangers (PCM HXs). This study developed and compared two approximation-assisted reduced-order PCM HX models for the simulation of thermal storage components and systems, which were verified against a validated finite-volume model. They are a pure black-box model, and a grey-box model based on the Number of Transfer Units (or effectiveness-NTU) approach. We used the reduced-order models to predict the performance of standalone PCM HX for 1000 cases with different fluid inlet conditions and HX designs. We also integrated the models with a vapor compression system to predict the compressor energy consumption and total charging time under various conditions. The results show that overall, the black-box model gave more accurate results than the grey-box model. On average, the mean absolute deviation in the PCM HX fluid outlet temperature was 0.05 K and 0.1 K for the black-box model and grey-box model, respectively. The grey-box model gave larger temperature deviation toward the end of the phase change process, due to the simplified two-node PCM representation. On the system level, the mean absolute deviation in compressor energy consumption was 0.2% and 0.3% for the black-box model and grey-box model, respectively. Their mean absolute deviation in total charging time was 1.1% and 2.6%, respectively. In terms of computation efficiency, the system simulation speedup ratio gained by using the reduced-order models was 11 to 57. System simulation time was decreased from an average of 1465 s to an average of 59 s. This shows that the proposed reduced-order modeling methods can be used to predict system performance of PCM HXs with less than 3% accuracy penalty, and 25 times less computational time than finite-volume models, enabling faster design and evaluation of PCM thermal storage devices.

25 ENERGY STORAGE↗
DOE OSTI2020

Ab initio Study of the Mechanism for the Initiation of Localized Corrosion on Stainless Steel

Stainless steels are widely used as primary piping material in PWR’s because of their high corrosion resistance largely due to the formation of a passive film of metal oxides, such as chromium (e.g., Cr2O3). However, upon exposure to aggressive ions like chlorides (Cl-), stainless steel becomes susceptible to localized corrosion due to the breakdown of the passive film. It is therefore essential to gain fundamental insights into the mechanism of the passive film breakdown (depassivation) to develop a tailored design to minimize localized corrosion. This project investigates the initial stages of the depassivation of the Cr passive film using density functional theory (DFT), a quantum based computational method.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Biomolecular assembly processes in the design of novel functional materials

Nature admits innumerable examples where efficient, remarkably parallelized, and precise organization of modular building blocks (e.g., molecules, particles) leads to diverse, complex, and functional structures. Unraveling such processes in order to mimic Nature’s design strategies remains the Holy Grail in establishing a multiscale paradigm for programmable materials production. Success in this endeavor would revolutionize the efficiency and precision with which complex materials are designed and synthesized, and would spawn novel, functional structures tailored precisely for applications. Among promising approaches to this bottom-up strategy is the use of particle-tethered, complementary single-stranded DNA (ssDNA) for programming particle assembly mediated by DNA hybridization into complex structures. The overall goal of our work was to develop a comprehensive computational and theoretical strategy aimed at overcoming current barriers in self-assembly of DNA-functionalized particles (DFPs).

36 MATERIALS SCIENCE↗
DOE OSTI2024

High throughput automated characterization of enamel microstructure using synchrotron tomography and optical flow imaging

The remarkable damage-tolerance of enamel has been attributed to its hierarchical microstructure and the organized bands of decussated rods. A thorough characterization of the microscale rod evolution within the enamel is needed to elucidate this complex structure. While prior efforts in this area have made use of single particle tracking to track a single rod evolution to various degrees of success, such a process can be both computationally and labor intensive, limited to the evolution path of a single rod, and is therefore prone to error from potentially tracking outliers. Particle image velocimetry (PIV) is a well-established algorithm to derive field information from image sequences for processes that are time-dependent, such as fluid flows and structural deformation. In this work, we demonstrate the use of PIV in extracting the full-field microstructural distribution of rods within the enamel. Further, enamel samples from a wild African lion were analyzed using high-energy synchrotron X-ray micro-tomography. Results from the PIV analysis provide sufficient full-field information to reconstruct the growth of individual rods that can potentially enable rapid analysis of complex microstructures from high resolution synchrotron datasets. Such information can serve as a template for designing damage-tolerant bioinspired structures for advanced manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A graph-based network for predicting chemical reaction pathways in solid-state materials synthesis

Abstract Accelerated inorganic synthesis remains a significant challenge in the search for novel, functional materials. Many of the principles which enable “synthesis by design” in synthetic organic chemistry do not exist in solid-state chemistry, despite the availability of extensive computed/experimental thermochemistry data. In this work, we present a chemical reaction network model for solid-state synthesis constructed from available thermochemistry data and devise a computationally tractable approach for suggesting likely reaction pathways via the application of pathfinding algorithms and linear combination of lowest-cost paths in the network. We demonstrate initial success of the network in predicting complex reaction pathways comparable to those reported in the literature for YMnO 3 , Y 2 Mn 2 O 7 , Fe 2 SiS 4 , and YBa 2 Cu 3 O 6.5 . The reaction network presents opportunities for enabling reaction pathway prediction, rapid iteration between experimental/theoretical results, and ultimately, control of the synthesis of solid-state materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Super-resolution image display using diffractive decoders

High-resolution image projection over a large field of view (FOV) is hindered by the restricted space-bandwidth product (SBP) of wavefront modulators. We report a deep learning–enabled diffractive display based on a jointly trained pair of an electronic encoder and a diffractive decoder to synthesize/project super-resolved images using low-resolution wavefront modulators. The digital encoder rapidly preprocesses the high-resolution images so that their spatial information is encoded into low-resolution patterns, projected via a low SBP wavefront modulator. The diffractive decoder processes these low-resolution patterns using transmissive layers structured using deep learning to all-optically synthesize/project super-resolved images at its output FOV. This diffractive image display can achieve a super-resolution factor of ~4, increasing the SBP by ~16-fold. We experimentally validate its success using 3D-printed diffractive decoders that operate at the terahertz spectrum. This diffractive image decoder can be scaled to operate at visible wavelengths and used to design large SBP displays that are compact, low power, and computationally efficient.

36 MATERIALS SCIENCE↗
DOE OSTI2024

INSPIRED: Inelastic neutron scattering prediction for instantaneous results and experimental design

Inelastic neutron scattering (INS) has unique advantages in probing how atoms vibrate and how the vibrations propagate and interact. Such dynamic information is crucial in understanding various material properties, from heat capacity, thermal conductivity, phase transitions, and chemical reactions to more exotic quantum behavior. The analysis and interpretation of the INS spectra often start from a model structure of the sample, followed by a series of calculations to obtain the simulated spectra to compare with experiments. The conventional way to perform such calculations usually requires significant time, computing resources, and specialized expertise. Here, we present a new program named INSPIRED (Inelastic Neutron Scattering Prediction for Instantaneous Results and Experimental Design), which enables users to perform rapid INS simulations in several different ways on their personal computers in just a few clicks, with the crystal structure as the only input file. Specifically, the users can choose a pre-trained symmetry-aware neural network (coupled with an autoencoder) to predict the phonon density of states (DOS), 1D S(E) and 2D S(|Q|,E) spectra for any given structure. One can also choose an existing density functional theory (DFT) calculation from a database (containing over 12,000 crystals), and quickly obtain the simulated INS spectra for single crystals and powders. It is also possible to use pre-trained universal machine learning force fields to relax a given crystal structure, calculate the phonon dispersion and DOS, and, subsequently, the INS spectra. All these functions are implemented with a PyQt graphic user interface. Finally, we expect these new tools will benefit broad user communities and significantly improve the efficiency of experiment design, execution, and data analysis for INS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Designing multicomponent hydrides with potential high T c superconductivity

While hydrogen-rich materials have been demonstrated to exhibit high T c superconductivity at high pressures, there is an ongoing search for ternary, quaternary, and more chemically complex hydrides that achieve such high critical temperatures at much lower pressures. First-principles searches are impeded by the computational complexity of solving the Eliashberg equations for large, complex crystal structures. Here, we adopt a simplified approach using electronic indicators previously established to be correlated with superconductivity in hydrides. This is used to study complex hydride structures, which are predicted to exhibit promisingly high critical temperatures for superconductivity. In particular, we propose three classes of hydrides inspired by the Fm$\overline{3}$ m RH 3 structures that exhibit strong hydrogen network connectivity, as defined through the electron localization function. The first class [RH 11 X 3 Y] is based on a Pm$\overline{3}$m structure showing moderately high T c , where the T c estimate from electronic properties is compared with direct Eliashberg calculations and found to be surprisingly accurate. The second class of structures [(RH 11 ) 2 X 6 YZ] improves on this with promisingly high density of states with dominant hydrogen character at the Fermi energy, typically enhancing T c . The third class [(R 1 H 11 )(R 2 H 11 )X 6 YZ] improves the strong hydrogen network connectivity by introducing anisotropy in the hydrogen network through a specific doping pattern. These design principles and associated model structures provide flexibility to optimize both T c and the structural stability of complex hydrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Iron-iminopyridine complexes as charge carriers for non-aqueous redox flow battery applications

Non-aqueous redox flow batteries (RFBs) have been gaining increased attention in the energy storage arena. Some of their attractive features include the promise for high energy densities, wider voltage windows compared to aqueous systems, as well as wider operating temperature ranges. One of the major challenges in the development of these systems is the lack of electroactive materials that can undergo reversible redox events within the larger potential window of organic solvents. In this paper, we present the design, synthesis, and measurement of electrochemical properties of some iron-based imine- and iminopyridine complexes as promising candidates for RFB applications. Synthesized complexes afforded three reversible redox couples over a ~3 V range. The redox events were also computationally explored and are in good agreement with experimental data. Theoretical calculations show that the redox event at the positive potential can be characterized as metal-centered event corresponding to Fe 3+ → Fe 2+ reduction, while the two redox events at negative potentials are associated with the consecutive reductions of iminopyridine or diimine moieties. This work has led to the identification of a promising anolyte material, [tris(imino)pyridine)Fe][OTf] 2 (1), which is soluble in acetonitrile and is synthesized in two simple steps. This species shows outstanding performance when cycled between 1.0 V and 2.35 V, with 93% coulombic efficiency, 84% energy efficiency, and a capacity decay rate of 0.61% per cycle at 5 mA cm –2 . Further modifications to this kind of charge carrier may lead to the development of high energy density materials for grid scale energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2025

𝐴𝑏 initio density-matrix approach to exciton coherence: Phonon scattering, Coulomb interactions, and radiative recombination

Relaxation processes following light excitation in semiconductors are key in materials-based quantum technology applications. These processes are broadly studied in atomically thin transition-metal dichalcogenides, quasi-two-dimensional excitonic semiconductors in which atomistic design allows for tunable excited-state properties, such as relaxation lifetimes and photoinduced coherence. In this work, we present a density-matrix-based approach to compute exciton relaxation within a many-body ab initio perspective. We expand our previously developed Lindblad density-matrix formalism to capture multichannel electron-hole pair relaxation processes, including phonon and Coulomb scattering as well as radiative recombination, and we study their effect on the time-resolved excited-state propagation. Using monolayer MoSe 2 as a prototypical example, we examine many-body effects on the time-dependent dynamics of photoactive excitations, exploring how the electron-hole pair interactions are reflected in variations of the excitation energy, spectral signature, and state coherence. In conclusion, our method supplies a detailed understanding of exciton relaxation mechanisms in realistic materials, offering a previously unexplored pathway to study excited-state dynamics in semiconductors from first principles.

Band structure methods↗
DOE OSTI2025

CALPHAD-based ICME design of single-step aging to enhance mechanical strength of WAAM Haynes 282

To match the strength of wire-arc additive manufactured Haynes 282 to its wrought counterpart via a single-step aging heat treatment, the CALPHAD (Calculation of Phase Diagrams) method is integrated with physics-based process-structure-property models and experimental validation. The integrated computational materials engineering (ICME) framework simulates the effects of aging on γ′ and M 23 C 6 precipitation and the resulting yield strength. To improve simulation reliability, the interfacial energies between γ/γ′ and γ/M 23 C 6 carbides were estimated by comparison with precipitation kinetic modeling and measured precipitate sizes. γ′ and M23C6 were found to precipitate simultaneously between 640 and 860 °C, producing microstructures similar to those produced by two-step aging. The optimal γ′ size for peak yield stress was calculated to be 20–23 nm. WAAM Haynes 282 aged at 780 °C for 50 h exceeded the mechanical performance of its wrought counterpart subjected to two-step aging, though desired properties can also be achieved at 800 °C for 16 h or less. The error in yield strength is less than 20 MPa, demonstrating good agreement between the modeling framework and experiments. Creep studies showed that WAAM Haynes 282 exceeded the calculated rupture time, reaching 481 h. This proposed methodology can accelerate the design of aging heat treatments for any γ′-strengthened nickel-base alloy, minimizing the resources required for trial-and-error experiments.

CALPHAD↗
DOE OSTI2023

Artificial Intelligence-Enhanced, Multi-Level, Modular System Design

As Moore’s Law and Dennard Scaling come to an end, it is becoming increasingly important to develop non-von Neumann computing architectures that can perform low-power computing in the domains of scientific computing, artificial intelligence, embedded systems, and edge computing. Next-generation computing technologies, such as neuromorphic computing and quantum computing, have the potential to revolutionize computing. However, in order to make progress in these fields, it is necessary to fundamentally change the current computing paradigm by codesigning systems across all system level, from materials to software. Because skilled labor is limited in the field of next-generation computing, we are developing artificial intelligence-enhanced tools to automate the codesign and co-discovery of next-generation computers. Here, we develop a method called Modular and Multi-level MAchine Learning (MAMMAL) which is able to perform analog codesign and co-discovery across multiple system levels, spanning devices to circuits. We prototype MAMMAL by using it to design simple passive analog low-pass filters. We also explore methods to incorporate uncertainty quantification into MAMMAL and to accelerate MAMMAL by using emerging technologies, such as crossbar arrays. Ultimately, we believe that MAMMAL will enable rapid progress in developing next-generation computers by automating the codesign and co-discovery of electronic systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

On the integration of molecular dynamics, data science, and experiments for studying solvent effects on catalysis

Computational workflows that combine molecular dynamics (MD) simulations and emerging data-centric (DC) methods can accelerate the screening and analysis of solvent systems experimentally and computationally. Here, MD simulations provide atomic positions and velocities of reactant, solvent, and catalyst materials that can be manipulated into data representations that in turn can be used by DC techniques to conduct predictive modeling, feature extraction, and experimental design. For liquid-phase catalytic applications, emerging DC techniques such as Convolutional and Graph Neural Networks (CNN/GNN), Topological Data Analysis (TDA), and Active Learning (AL) can leverage MD and experimental data to quickly predict solvent effects on reaction outcomes. For instance, in recent studies, 3D solvent environments obtained with MD have been exploited by CNNs to predict experimental reaction rates for homogeneous acid-catalyzed lignocellulosic processes. In this perspective, we discuss basic principles of DC methods and how these can be combined with MD to enable high-throughput screening of solvent selection for diverse catalysis applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Crystallographic Mapping and Tuning of Water Adsorption in Metal–Organic Frameworks Featuring Distinct Open Metal Sites

Crucial steps toward designing water sorption materials and fine-tuning their properties for specific applications include precise identification of adsorption sites and establishment of rigorous molecular-level insight into the water adsorption process. We report stepwise crystallographic mapping and DFT computations of adsorbed water molecules in ALP-MOF-1, a metal-organic framework decorated with distinct open metal sites and carbonyl functional groups that serve as water anchoring sites for seeding the nucleation of a complex water network. Identification of an unusual water adsorption step in ALP-MOF-1 motivated the tuning of metal ion composition to carefully adjust water uptake. These studies provide direct evidence that the identity of the open metal sites in MOFs can dramatically affect water adsorption behavior between 0 and ~20% RH and that multiple proximal water anchoring sites along the MOF skeleton facilitate water uptake steps which could be potentially useful for applications requiring rapid and energetically facile water sorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Superconducting neural networks with disordered Josephson junction array synaptic networks and leaky integrate-and-fire loop neurons

Fully coupled randomly disordered recurrent superconducting networks with additional open-ended channels for inputs and outputs are considered the basis to introduce a new architecture to neuromorphic computing in this work. Various building blocks of such a network are designed around disordered array synaptic networks using superconducting devices and circuits as an example, while emphasizing that a similar architectural approach may be compatible with several other materials and devices. A multiply coupled (interconnected) disordered array of superconducting loops containing Josephson junctions [equivalent to superconducting quantum interference devices (SQUIDs)] forms the aforementioned collective synaptic network that forms a fully recurrent network together with compatible neuron-like elements and feedback loops, enabling unsupervised learning. This approach aims to take advantage of superior power efficiency, propagation speed, and synchronizability of a small world or a random network over an ordered/regular network. Additionally, it offers a significant factor of increase in scalability. Here, a compatible leaky integrate-and-fire neuron made of superconducting loops with Josephson junctions is presented, along with circuit components for feedback loops as needed to complete the recurrent network. Several of these individual disordered array neural networks can further be coupled together in a similarly disordered way to form a hierarchical architecture of recurrent neural networks that is often suggested as similar to a biological brain.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Development and Demonstration of a Fuel-Efficient, Class 8 Tractor & Trailer Engine System (SuperTruck II)

Navistar presents the SuperTruck II (ST II) Final Report to the Unites States Department of Energy (US DOE), which covers the five Budget Periods (BPs) from 10-1-2016 through 6-30-2022. For ST II, Navistar built on the achievements of the SuperTruck I (ST I) Program as a catalyst to continue critical research, design and development, testing, and operations to reach the ambitious goals of the ST II project. This approach allowed Navistar to continue contributing to the essential needs of our nation for safe, efficient, and cost-effective delivery of goods and services, as we reduced negative environmental effects and improved operational productivity. This document contains information specified in DOE F 4600.2, Final Scientific/Technical Report DOE F 241.3, B. SCIENTIFIC/TECHNICAL REPORTS, explaining how we met and exceeded program requirements. Throughout this Final Report, Navistar extracted information from documents prepared during the project that represent our management, design and development, building, and testing efforts to meet and exceed SuperTruck II project goals. Navistar followed Plan requirements to achieve / exceed Project Objectives: a) >100% improvement in vehicle freight efficiency (FE) (on ton-MPG basis) relative to 2009 baseline with stretch goal of 140% improvement [actual: 170%); b) >55% engine brake thermal efficiency (BTE) demonstrated in operational engine at a 65-mph cruise point on a dynamometer – ≥31% increase from 2009 baseline [actual: 55.20% of combined BTE) ; and c) development and implementation of commercially cost effective technologies (in terms of a simple payback). Technology selection / development path focused on developing technologies applicable for production within 3-year approach, while ensuring technology readiness and cost of ownership for end users. The Program was organized into five budget periods: Requirements / Technology Assessment and Initial Hardware Testing; Technology Development and Concept Readiness Demonstration; Technology Finalization and Validation Tractor / Trailer Fabrication, Integration and Commissioning Demonstration; and Fuel Economy (FE) and Brake Thermal Efficiency (BTE) and Program Completion. Leadership was provided by DOE, with tasks performed by laboratories (Argonne National Laboratory, Lawrence Livermore National Laboratory); partners at Bosch, TPI, Dana, and J.B. Hunt; , and support from University of Michigan and Clemson University. Navistar lead this team with Principal Investigator / Contracting Officer; Project Manager (PM); Vehicle, Engine, and Aftertreatment Engineers; Finance Manager, Technical Program Leads, and Legal/IP; and other key personnel. Work also included personnel in risk management; funding / budget / finance. Work involved analysis, development, testing, and down selection of individual/system engine, aftertreatment, and vehicle technologies, with integration of selected technologies into a prototype vehicle for demonstration of fuel-efficiency gain. Work also included component/integrated system level development of truck and trailer aerodynamics, base engine efficiency, advanced aftertreatment, combustion efficiency, waste heat recovery, hybrid powertrain, reduced rolling resistance, weight reduction, idle reduction, and driver feedback. As ST II progressed, Navistar performed computer-based modeling / simulations of technologies focused on the primary operational areas: Engine, Aftertreatment, and Vehicle. During the ST II Program, the COVID Virus outbreak unexpectedly challenged by the effects of, which affected staffing, scheduling, design, supplies, availability of materials, production procedures, and testing. The DOE responded by extending the program by three quarters to ensure that project tasks were completed for this vital project. Focus continued on analyzing, developing, testing, and down selecting individual-/system-level engine and vehicle technologies for integration of the final selected technologies into a prototype vehicle that would demonstrate fuel-efficiency gains made possible through these technologies. This included component/integrated system-level development of truck and trailer aerodynamics, base engine efficiency, advanced aftertreatment, combustion efficiency, waste heat recovery, solar power, distributed and intelligent vehicle power, hybrid powertrain, reduced rolling resistance, weight reduction, idle reduction, and driver feedback. Throughout the program, function, reliability, and performance at all levels were ensured through testing. Proof of this approach was demonstrated in multiple, on-road demonstrations: Scenario A (Flatland) Fuel Economy, Scenario B (Hilly) Fuel Economy, and City Cycle Tests. Other benefits derived from ST II included new/improved products, publications, patents, and next-step capabilities related to electric/hydrogen vehicles and autonomous driving.

Zukouski, Russ↗
DOE OSTI2025

Science of Scale-Up: Accelerating chemical manufacturing technology development workshop report

The Science of Scale-Up: Accelerating chemical manufacturing technology development workshop report outlines key insights and actionable recommendations for accelerating the scale-up of disruptive chemical manufacturing technologies. Convened in October 2024, the workshop brought together approximately fifty experts from academia, industry, national laboratories, and government agencies to address the barriers and solutions for maturing technologies from proof-of-concept to commercialization. The report identifies seven critical themes for enabling faster scale-up. These themes were explored through general discussions and breakout sessions focused on three specific chemical manufacturing technologies—electrochemical, thermochemical, and biological conversion processes. The findings emphasize the importance of interdisciplinary collaboration, robust funding mechanisms, and shared resources to overcome technical barriers and accelerate technology deployment. The report also highlights technology-specific challenges and opportunities, including the need for advanced materials, scalable manufacturing processes, and integrated testing environments. For electrochemical manufacturing processes, durability and material optimization are key priorities, while thermochemical processes require novel reactor designs and better supply chain integration. Biological conversion processes face hurdles in strain engineering, reactor design, and process integration. Across all technologies, the workshop emphasized the importance of leveraging computational tools, standardized protocols, and collaborative networks to address knowledge gaps and technical barriers. By acting on these insights, stakeholders can reduce the timeline for scaling up critical chemical manufacturing technologies, ensuring their timely impact on manufacturing competitiveness, and environmental sustainability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Opportunities and Challenges of Computational Electromagnetics Methods for Superconducting Circuit Quantum Device Modeling: A Practical Review

High-fidelity numerical methods that model the physical layout of a device are essential for the design of many technologies. For methods that characterize electromagnetic effects, these numerical methods are referred to as computational electromagnetics (CEM) methods. Although the CEM research field is mature, emerging applications can still stress the capabilities of the techniques in use today. The design of superconducting circuit quantum devices falls in this category due to the unconventional material properties and important features of the devices covering nanometer to centimeter scales. Such multiscale devices can stress the fundamental properties of CEM tools which can lead to an increase in simulation times, a loss in accuracy, or even cause no solution to be reliably found. While these challenges are being investigated by CEM researchers, knowledge about them is limited in the broader community of users of these CEM tools. This review is meant to serve as a practical introduction to the fundamental aspects of the major CEM techniques that a researcher may need to choose between to model a device, as well as provide insight into what steps they may take to alleviate some of their challenges. Our focus is on highlighting the main concepts without rigorously deriving all the details, which can be found in many textbooks and articles. After covering the fundamentals, we discuss more advanced topics related to the challenges of modeling multiscale devices with specific examples from superconducting circuit quantum devices. We conclude with a discussion on future research directions that will be valuable for improving the ability to successfully design increasingly more sophisticated superconducting circuit quantum devices. Although our focus and examples are taken from this area, researchers from other fields will still benefit from the details discussed here.

Elkin, Samuel T. [Virginia Tech., Blacksburg]↗