Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A Comparative Study of Joint Modeling Methods and Analysis of Fasteners [Slides]

Motivation: Crucial aspect of mechanical design is joining methodology of parts. Ability to analyze joint and fasteners in system for structural integrity is fundamental. Different modeling representations of fasteners include spring, beam, and solid elements. Various methods compared for linear system to decide method appropriate for design study. New method for modeling fastener joint is explored from full system perspective. Analysis results match well with published experimental data for new method.

42 ENGINEERING↗
DOE OSTI2022

Local Power: Comparing County-Level Renewable Energy Potential to Consumption Using the SLOPE Platform

Wide-scale deployment of renewable energy technologies has the potential to significantly reduce greenhouse gas emissions and mitigate the effects of climate change. Many communities have ambitious clean energy goals with targets for locally generated renewable energy. To inform state and local clean energy planning, analysts from the Joint Institute for Strategic Energy Analysis (JISEA) and National Renewable Energy Laboratory (NREL) used data from NREL's State and Local Planning for Energy (SLOPE) platform to compare annual technical generation potential of renewable energy technologies to modeled electricity consumption in every county of the contiguous United States. Annual costs were calculated to produce a 20% share of electricity consumed annually from each technology to examine localized cost effectiveness of a diversified mix of generation sources. For example, combining distributed and utility-scale wind and solar generation can offset the need for storage and nonintermittent fossil resources to achieve high deployment of renewables. This county-level analysis provides insight into where localized renewable energy generation could cost-effectively match annual electricity consumption.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Compare $\overline{ν}$ parameterizations for 235 U(n,f) with fitted fission barriers

In this document, we compare observables computed with CGMF to some available data for 235 U(n,f), to investigate the multi-chance fission probabilities (fission barriers from CoH were refit) and two TKE parametrization. The four parametrizations include i) default CGMF multi-chance fission probabilities with bends in TKE for all fission chances, ii) default CGMF multi-chance fission probabilities with a TKE bend in only first-chance fission iii) refitted multi-chance fission probabilities with bends in TKE for all fission chances, and iv) refitted multi-chance fission probabilities with a bend in TKE for only first-chance fission. In all figures where the four parametrizations are on the same plot, the ones with bends in TKE for all chance fission are in black, with only first-chance bend in red, the default multi-chance fission probabilities are dashed and the new multi-chance fission probabilities are the solid lines.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Comparative Analysis of Confidence Metrics for Nuclear Criticality Safety

Nuclear criticality safety standards provide guidance on the requirements and recommendations to establish confidence in computerized model results used to support operation with fissionable materials. By design, the guidance is not prescriptive, leaving the analysts free to determine how various sources of uncertainties are to be statistically aggregated. This report compares the analyses and key assumptions behind four notable methodologies documented in the nuclear criticality safety literature: the parametric, nonparametric, Whisper, and TSURFER methodologies. Because of the involved use of statistics entangled with heuristic recipes, the results of these methodologies are often difficult to interpret. Also, they are augmented by additional large administrative margins, eliminating the incentive to understand their differences. With the new resurgent wave of advanced nuclear systems focused on economizing operation—including advanced reactors, fuel cycles, and fuel concepts—there is a strong need to develop a clear understanding of uncertainties and their fusion methodologies to reduce uncertainties in a scientifically defensible manner. This report offers a deep dive into the various assumptions of the four noted methodologies, their adequacy, and their limitations, to provide guidance on developing confidence for the emergent nuclear systems. These systems are expected to be challenged by the scarcity of experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Comparative Techno-Economic Analysis of Available Feedstocks for High-Temperature Conversion: Whole Tree Thinnings and Mature Pine Residues

The TEA and LCA impacts of utilizing low-cost feedstocks in a high-temperature conversion process are of great interest. Here, we investigate the conversion cost impacts of two underutilized feedstocks from the commercial pine industry; 13-year-old whole trees, representing trees removed for the purpose of pre-commercial thinning, and 23-year-old pine residues, representing a waste stream produced from the deconstruction of mature trees for other purposes. Experimental fast pyrolysis data for each feedstock was used in tandem with results from supply and preprocessing analyses in order to evaluate the field-to-fuel economics. A low difference in MFSP was found between the conversion costs for the two feedstocks, with residues demonstrating a net benefit of $0.27/GGE compared to the whole tree thinnings, driven primarily by feedstock supply costs. This suggests that both whole tree thinnings and pine residues may be viable feedstock options for CFP conversion. Life cycle inventories were also generated for each case, enabling a field-to-fuel quantification of the cost and carbon cycle associated with each feedstock.

09 BIOMASS FUELS↗
DOE OSTI2023

A Comparative Evaluation and Selection of High-Temperature Heat Exchangers for Application to Integrated Energy Systems

The following report aims to create a refined and well-structured method for comparatively evaluating heat exchanger technologies for integrated energy systems that caters customers’ specific needs while meeting engineering requirements. For the evaluation, this study elevates previous evaluation metrics, enhances the knowledge base via literature and market surveys, and identifies the figures of merit with robust rationales to enhance the quality of decisions made throughout the proposed heat exchanger evaluation process. The heat exchanger designs evaluated as part of the case study are shell and tube heat exchangers, printed circuit heat exchangers, plate heat exchangers, spiral heat exchangers, and heat pipe heat exchangers. The information presented in this report is meant for industries interested in making a preliminary screening process to identify the most suitable heat exchanger design for their application of interest.

42 ENGINEERING↗
DOE OSTI2023

Compare predictions of transient fission gas release by empirical and mechanistic models to experiments in high burnup UO 2 fuel

Understanding and predicting fuel performance at high burnup require improving our understanding of transient fission gas release. High-burnup operations enable new mechanisms of fission gas release, which affect fuel performance. The Nuclear Regulatory Commission has recently published its interpretation of existing fuel fragmentation, relocation, and dispersal data in a research information letter. There, transient fission gas release was identified as one of the main factors that contributes to fuel fragmentation, relocation, and dispersal, and therefore limits fuel extension to high burnup. However, transient fission gas release is a complex phenomenon that cannot be fully described by simple empirical descriptions. This report summarizes the development of a mechanistic model for high-burnup transient fission gas release in the fuel performance code BISON. This research was supported by the Nuclear Energy Advanced Modeling and Simulation program during fiscal year 2023 to improve our understanding of high-burnup transient fission gas release and ability to predict it as a function of operation history. To support the development of a mechanistic transient fission gas release model, the existing Simple Integrated Fission Gas Release and Swelling (Sifgrs) model in BISON has been completely refactored to make it more modular and extensible. This effort supports the model's application to high-burnup conditions, its extension to other fuel forms, and the continuous improvement of its current features. Once refactoring was completed, models for high-burnup structure formation, fission gas transfer from non-restructured fuel to high-burnup structure, high-burnup structure intragranular and intergranular fission gas behavior, high-burnup structure bubble evolution, fuel pulverization, and the resulting transient fission gas release were tested and implemented in the Simple Integrated Fission Gas Release and Swelling (Sifgrs) model or tightly coupled to it. The new mechanistic model was then compared to an empirical model developed in parallel by a Nuclear Energy University Program project using a Studsvik high-burnup loss-of-coolant-accident assessment case. Finally, the report details the preliminary BISON results for a benchmark activity organized by the Nuclear Energy Agency to evaluate fuel performance codes' predictive capabilities for burst fission gas release. This work represents an important step toward a mechanistic understanding of fission gas release in high-burnup conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Comparative Analysis of Standard and Advanced USL Methodologies [Slides]

This presentation is on the comparative analysis of standard and advanced USL methodologies. Each method has a different way to address/account for experimental biases and uncertainties. This study showed why bias and uncertainty predictions by these popular methods differ significantly in some cases. In order to establish confidence to our validation efforts, especially with new reactor concepts, in designing new critical experiments and claiming experimental coverage for our existing applications, we need to understand capabilities of our methods further.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

KCl-UCl 3 molten salts investigated by Ab Initio Molecular Dynamics (AIMD) simulations: A comparative study with three dispersion models

Ab Initio Molecular Dynamics (AIMD) simulations are performed on molten KCl-UCl 3 salt mixtures to determine energies, heat capacities, and densities. The density-dependent energy correction (DFT-dDsC), Grimme et al.’s DFT-D3, and Langreth & Lundqvist (vdW-cx) models are used for dispersion forces and combined with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation potential with a Hubbard U param eter for the 5$f$ electrons of uranium. After validating predictions for the end-member systems to literature data, KCl-UCl 3 mixtures are studied at select temperatures. Densities and energies both deviate from ideal solution behavior, with the maximum deviation occurring around 36% UCl 3 for mixing energies and slightly lower (29% UCl 3 ) for densities. Compared to the NaCl-UCl 3 system, which was previously investigated using the same simulation methodologies, the KCl-UCl 3 density and mixing energy deviations from ideal solution behavior are larger by almost a factor of two. No deviation from ideal solution behavior for heat capacity was observed. The AIMD predictions for mixing energies and densities agree qualitatively with experimental data, though the spread in data obtained from the various dispersion force models utilized, measurements, and empirical estimates makes strong conclusions difficult. The dependence of thermodynamic and thermophysical properties on composition is correlated with the local chemistry of the solution phase, in particular, the tendency of UCl 3 to form network structures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Comparative Analysis of Cosmological Simulations via Angular Power Spectra

Cosmology is the study of the universe's origin, large-scale structure, and dynamics. One such area of study is understanding dark energy and dark matter. Dark matter has not been observed to interact with luminous matter other than through gravitational attractions, forming large scale structures observed throughout the universe. In this area, the primary model is the Lambda Cold Dark Matter (ΛCDM) model. This standard model consists of cosmological dark energy (Λ), cold dark matter (CDM), and normal luminous matter. We use angular power spectra (APS) to compare simulated ΛCDM models with observed large-scale galaxy distributions from the DECam Local Volume Exploration Survey (DELVE) [1]. After ensuring that the simulations can produce APS that match observational results, we vary cosmological parameters to constrain the allowed ranges of parameter values that are consistent with the observed data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Comparative Life Cycle Analysis of Carbon Dioxide Utilization in Concrete Products

In this study, a comparative LCA of CO2U concrete processes is conducted, revealing promise in several research areas. The environmental impacts of replacing conventional binder and aggregates with carbonated steel slag and direct carbonation of concrete are investigated in ten different product systems, which include both ready-mix and pre-cast concretes. The results indicate that cement substitution, CO2 uptake, electricity consumption, and the electricity grid mix constitute critical levers for deep decarbonization of concrete building materials. This presentation applies LCA to inform the use of CO2U concrete technology pathways in the design of sustainable concrete while promoting transparency and rational assumptions in the presence of uncertainty. Broader themes in the work include LCA of emerging technologies and the sensitivity of LCA results to co-product management methods.

Clarke, James↗
DOE OSTI2025

Analyzing Tradeoffs Associated with the Manufacture of Refined Fuels by Comparing Volatile Organic Compound (VOC) Emissions Model Results with Carbon Impacts

A first-of-its kind, publicly-available model for estimating emissions of volatile organic compounds from operations along the supply chain of liquid fuels and refinery products is presented and demonstrated. This standardized model permits comprehensive, reproducible, and comparable evaluation of the supply chain/life cycle VOC emissions of liquid fuels and refinery products.

09 BIOMASS FUELS↗
DOE OSTI2026

Comparative Assessment of Radiological Consequences from Sabotage-Induced Releases in Diverse Microreactor Designs

Many microreactor design developers are planning to reduce on-site physical protection measures and emergency planning zones by relying on robust fuel and reactor designs and leveraging passive safety systems. These reductions raise the risk of sabotage at these microreactors. To evaluate these requirements, this study assessed the radiological consequences of sabotage-induced accidents at microreactors. For the assessment, five diverse designs, each producing 30 MWt, were considered. These designs included pressurized water microreactors (PWMs), sodium-cooled fast microreactors (SFMs), high-temperature helium-cooled prismatic microreactors (HTPMs), heat pipe–cooled microreactors (HPMs), and molten salt–cooled microreactors (MSMs). For each design, two postulated sabotage-induced accidents were defined along with the associated release percentages of fission products. Additionally, consequences from the release of activation products were assessed. With regard to evaluating physical protection and emergency planning requirements, the consequences of sabotage-induced accidents for each design type were found to be comparable. The differences were primarily because of the distinct fuel forms (and associated release mechanisms), burnup, and neutron spectra of the different microreactor types. Future effort will further investigate the release percentages of fission products to perform accurate dose consequence assessment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Comparing CRT and Pandora Tagged Tracks in ICARUS

The ICARUS Liquid Argon Time Projection Chamber (LArTPC) is used to investigate short-baseline neutrino oscillations and the possible existence of sterile neutrinos. To aid in identifying and rejecting cosmic ray backgrounds, the system is outfitted with external Cosmic Ray Taggers (CRTs). The CRT is able to measure more tracks and at a wider range of angles, useful in further detailing future calibrations. This project compared the most probable values (MPVs) of charge deposition between CRT tagged and TPC tagged tracks. The Y-Z maps of charge scale for both datasets show a strong correlation, not just in their overall structure, but also in how they reflect known detector effects. Both reconstruction paths showed similar structures in their charge distribution, such as less effective wire section or mechanical support, confirming that CRT-tagged tracks, despite being external, respond to the same calibration landscape as Pandora tracks, validating previous Pandora reconstructions and values. Overall, the analysis supports the idea that the CRT tags are a useful addition to ICARUS calibration efforts. Their broad angular range and independence from Pandora reconstruction make them a helpful secondary tool and a potential asset in extending calibration across the detector volume.

Thayer, Abigail [Colorado State U.] (ORCID:0009000↗
DOE OSTI2024

Comparative Analysis of Explosion Signals on Smartphones and Seismometers [Poster]

Seismoacoustic signatures from a chemical explosion was recorded on two seismometers and eight smartphone accelerometers at Idaho National Laboratory (INL). The captured waveform’s propagation and its time frequency representations are compared. The smartphone accelerometers were able to pick up a clear seismoacoustic explosion signal at within 1 km (150 m/kg 1/3 ) and a noisy signal up to 5.3 km (790 m/kg 1/3 ).

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗
DOE OSTI2023

A Comparative Evaluation and Selection of High-Temperature Heat Exchangers for Application to Integrated Energy Systems

The following report aims to create a refined and well-structured method for comparatively evaluating heat exchanger technologies for integrated energy systems that caters customers’ specific needs while meeting engineering requirements. For the evaluation, this study elevates previous evaluation metrics, enhances the knowledge base via literature and market surveys, and identifies the figures of merit with robust rationales to enhance the quality of decisions made throughout the proposed heat exchanger evaluation process. The heat exchanger designs evaluated as part of the case study are shell and tube heat exchangers, printed circuit heat exchangers, plate heat exchangers, spiral heat exchangers, and heat pipe heat exchangers. The information presented in this report is meant for industries interested in making a preliminary screening process to identify the most suitable heat exchanger design for their application of interest.

42 - ENGINEERING↗
DOE OSTI2026

Design of a Cryogenic Assembly for Comparing Qubit Infrared Packaging Inefficiencies

It is well known that everything emits infrared (IR) light in the form of thermal radiation. IR radiation on superconducting qubits carries enough energy to cause decoherence and so-called “quasiparticle poisoning.” Therefore, proper IR shielding is needed to keep the qubit in a high-coherence state. However, trying to extract IR-specific information from a qubit is difficult, so a microwave kinetic inductance detector (MKID) can be used instead. We show that the IR shielding inefficiencies of MKID packages can only be compared with other packaging inefficiencies. We create a cryogenic assembly CAD design, consisting of magnetic shield cans, a copper mounting plate and mounts, and an MKID enclosure, which thermalizes the assembly to dilution refrigerator temperatures. Phase 1 of this design involves using a narrowband IR laser source to test the IR shielding of packaging at the laser’s wavelength. When the best IR shielding packaging is determined, the superconducting qubit can replace the MKID, allowing the qubit to avoid decoherence due to IR radiation and boost its performance and coherence lifetime.

Mailliard, Robert J. [Fermilab] (ORCID:00090000277↗
DOE OSTI2026

Design of a Cryogenic Assembly for Comparing Qubit Infrared Packaging Inefficiencies

It is well known that everything emits infrared (IR) light in the form of thermal radiation. IR radiation on superconducting qubits carries enough energy to cause decoherence and so-called “quasiparticle poisoning.” Therefore, proper IR shielding is needed to keep the qubit in a high-coherence state. However, trying to extract IR-specific information from a qubit is difficult, so a microwave kinetic inductance detector (MKID) can be used instead. We show that the IR shielding inefficiencies of MKID packages can only be compared with other packaging inefficiencies. We create a cryogenic assembly CAD design, consisting of magnetic shield cans, a copper mounting plate and mounts, and an MKID enclosure, which thermalizes the assembly to dilution refrigerator temperatures. Phase 1 of this design involves using a narrowband IR laser source to test the IR shielding of packaging at the laser’s wavelength. When the best IR shielding packaging is determined, the superconducting qubit can replace the MKID, allowing the qubit to avoid decoherence due to IR radiation and boost its performance and coherence lifetime.

Mailliard, Robert J. [Fermilab] (ORCID:00090000277↗