Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Combustion modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Flame stability in combusting turbulent jets

The paper develops a model for the stability of turbulent methane/air flames on the assumption that reaction kinetics is much more important than the fluid dynamics near blowout. Flame stability is predicted as a function of ambient atmospheric temperature and composition, initial preheat temperature, and the percentage of external product gas recirculation. A one-step reaction and a well-stirred reactor are used to equate the rate at which the mass is supplied to the flame to the rate at which the mass chemically reacts in the flame.

Nelson, H. F.↗
NASA NTRS1980

An empirical propellant response function for combustion stability predictions

An empirical response function model was developed for ammonium perchlorate propellants to supplant T-burner testing at the preliminary design stage. The model was developed by fitting a limited T-burner data base, in terms of oxidizer size and concentration, to an analytical two parameter response function expression. Multiple peaks are predicted, but the primary effect is of a single peak for most formulations, with notable bulges for the various AP size fractions. The model was extended to velocity coupling with the assumption that dynamic response was controlled primarily by the solid phase described by the two parameter model. The magnitude of velocity coupling was then scaled using an erosive burning law. Routine use of the model for stability predictions on a number of propulsion units indicates that the model tends to overpredict propellant response. It is concluded that the model represents a generally conservative prediction tool, suited especially for the preliminary design stage when T-burner data may not be readily available. The model work included development of a rigorous summation technique for pseudopropellant properties and of a concept for modeling ordered packing of particulates.

Hessler, R. O.↗
NASA NTRS2018

Investigation of NO2 Measurements Made During DISCOVER-AQ and KORUS-AQ Campaigns in Conjunction with NO2 Tropospheric Column from the Ozone Monitoring Instrument (OMI) and High-Resolution Community Multi-Scale Air Quality (CMAQ) Model Simulation

Atmospheric NO2 is produced by combustion, lightning, and in soil. NO2 affects ozone production and criteria pollutant itself.It also has indirect radiative impacts in the troposphere, since ozone has largest warming effect in upper troposphere. Tropospheric vertical column densities (VCD) of NO2 are available from satellites (GOME, OMI, SCIAMACHY, GOME-2). DISCOVER-AQ and KORUS-AQ aircraft campaigns we reconducted to improve the use of satellites to monitor air quality for public health and environmental benefit in United States and South Korea. In this study, we investigate 1) How do these measurements compare? 2) What is the best way to make comparisons of space- and ground-based measurements?

multi-scale air quality↗
NASA NTRSDate not supplied

Shock Tube Characterization of Laser Absorption Sensors for Combustion Measurements of Green Propellants

Chemical kinetic models for green spacecraft propulsion systems are needed to calculate efficiency, estimate toxic products, and mitigate plume impingement risks. Laser absorption spectroscopy (LAS) is a common technique used to measure time-resolved mole fraction for model validation. LAS was used to measure species-time history nitrous oxide (N2O) and carbon monoxide (CO) behind reflected shock waves. The diagnostics were implemented at the University of Central Florida high-pressure shock tube facility. A mixture of ethylene (0.002) and N2O (0.008) was diluted with argon gas (0.99) and shock heated 12 bar and temperatures from 1400 to 1600 K.

Marley A. Albright↗
NASA NTRS1998

JANNAF 35th Combustion Subcommittee Meeting

Volume 1, the first of two volumes is a compilation of 63 unclassified/unlimited distribution technical papers presented at the 35th meeting of the Joint Army-Navy-NASA-Air Force (JANNAF) Combustion Subcommittee (CS) held jointly with the 17th Propulsion Systems Hazards Subcommittee (PSHS) and Airbreathing Propulsion Subcommittee (APS). The meeting was held on 7-11 December 1998 at Raytheon Systems Company and the Marriott Hotel, Tucson, AZ. Topics covered include solid gun propellant processing, ignition and combustion, charge concepts, barrel erosion and flash, gun interior ballistics, kinetics and molecular modeling, ETC gun modeling, simulation and diagnostics, and liquid gun propellant combustion; solid rocket motor propellant combustion, combustion instability fundamentals, motor instability, and measurement techniques; and liquid and hybrid rocket combustion.

Fry, Ronald S.↗
NASA NTRS1980

Gas phase kinetics during normal combustion

The role of gas phase kinetics during combustion was explored in the steady state modeling efforts and in the analysis of ignition phenomena. In both cases it was shown that the combustion characteristics of some high energy ingredients and propellants are strongly affected, if not dictated, by the gas phase reactions which take place.

Price, C. F.↗
NASA NTRS1977

An advanced combustor analytical design procedure and its application in the design and development testing of a premix/prevaporized combustion system

Due to the protracted time and relatively high monetary expenditures associated with empirical design procedures, AiResearch has placed considerable emphasis on the development and use of combustor analytical models to augment the existing design techniques. A brief account of the semi-empirical design procedure is given, followed by the description of six analytical computer models. An advanced combustor design logic based upon these models is presented. A brief description of a premix/prevaporized combustion system and correlation with the models is given.

Reynolds, R. S.↗
NASA NTRS1975

Analysis of liquid rocket combustion chamber turbulence levels from diffusion data

The intensity of turbulence and the Lagrangian correlation coefficient in a liquid-rocket combustion chamber have been analytically determined from an analysis of experimental diffusion data obtained in a small rocket engine which operated at 300-psia chamber pressure and produced approximately 250 pounds thrust. Results of gas-sample measurements obtained by Orsat and gas-chromatograph techniques to determine helium-concentration profiles were analyzed on the basis of Taylor's (1921) turbulent diffusion theory to obtain turbulence flow-field parameters. The results of the analysis indicate that turbulent diffusion in a combustion chamber can be adequately modeled by the one-dimensional Taylor theory, which assumes that the intensity of turbulence is a function only of axial distance in the chamber and that the Lagrangian correlation coefficient is expressed by a power law. The results indicate a higher intensity of turbulence and lower correlation than previously expected.

Smith, L. O., Jr.↗
NASA NTRS1981

Transient catalytic combustor model

A quasi-steady gas phase and thermally thin substrate model is used to analyze the transient behavior of catalytic monolith combustors in fuel lean operation. The combustor response delay is due to the substrate thermal inertia. Fast response is favored by thin substrate, short catalytic bed length, high combustor inlet and final temperatures, and small gas channel diameters. The calculated gas and substrate temperature time history at different axial positions provides an understanding of how the catalytic combustor responds to an upstream condition change. The computed results also suggest that the gas residence times in the catalytic bed in the after bed space are correlatable with the nondimensional combustor response time. The model also performs steady state combustion calculations; and the computed steady state emission characteristics show agreement with available experimental data in the range of parameters covered. A catalytic combustor design for automotive gas turbine engine which has reasonably fast response ( 1 second) and can satisfy the emission goals in an acceptable total combustor length is possible.

Tien, J. S.↗
NASA NTRS1986

NASA-Chinese Aeronautical Establishment (CAE) Symposium

Several topics relative to combustion research are discussed. A numerical study of combustion processes in afterburners; the modeling of turbulent, reactive flow; gas turbine research; modeling of dilution jet flow fields; and chemical shock tubes as tools for studying high-temperature chemical kinetics are among the topics covered.

Source record↗
NASA NTRS1992

Turbulent reacting flow computations including turbulence-chemistry interactions

A two-equation (k-epsilon) turbulence model has been extended to be applicable for compressible reacting flows. A compressibility correction model based on modeling the dilatational terms in the Reynolds stress equations has been used. A turbulence-chemistry interaction model is outlined. In this model, the effects of temperature and species mass concentrations fluctuations on the species mass production rates are decoupled. The effect of temperature fluctuations is modeled via a moment model, and the effect of concentration fluctuations is included using an assumed beta-pdf model. Preliminary results obtained using this model are presented. A two-dimensional reacting mixing layer has been used as a test case. Computations are carried out using the Navier-Stokes solver SPARK using a finite rate chemistry model for hydrogen-air combustion.

Narayan, J. R.↗
NASA NTRS1999

Reflight of the Solid Surface Combustion Experiment: Flame Radiation Near Extinction

In flame spreading in quiescent and low-velocity opposing flows, effects of surface reradiation and flame radiation are important in establishing the spread rate and whether the flame, once ignited, survives to steady spread or extinguishes after a time long compared to the ignition event. A reflight of the Solid Surface Combustion Experiment (SSCE), supported by modelling, demonstrates that for thick, flat fuels, the ultimate fate of the flame is extinction rather than steady spread. A mismatch between the thermal scale in the gas, driven by radiation, and the species diffusion scale, driven by mass diffusion, develops such that the high temperature regions of the flame are ultimately located in a region to which oxygen cannot be supplied at a sufficient rate to sustain reaction, and extinction occurs. Results of the experiment conducted on Space Shuttle mission STS 85 on 9 August 1997 are reviewed. For the flat surface geometry, while the hydrodynamic phenomena associated with opposed-flow flame spread may be treated two dimensionally, the radiative effects are three dimensional, and so modelling the radiative processes, with the mismatch in dimensionality, is difficult. The cylindrical geometry at least one long compared to the radius, provides a configuration in which the radiative processes for spread in the axial direction are two dimensional, thus simplifying the modelling. The cylindrical geometry allows for the development of more sophisticated radiative models without the complication of dimensionality concerns, e.g., discrete transfer, which is discussed in detail by Bundy (1998). Additionally, the cylindrical geometry results in a "focussing" of the heat transfer to the surface and may allow for steady spread for radii that for thick fuels of the same half-thickness there is no steady spread.

Altenkirch, R. A.↗
NASA NTRS2003

Transient Evolution of a Planar Diffusion Flame Aft of a Translating Flat Plate

The high degree of spatial symmetry of a planar diffusion flame affords great simplifications for experimental and modeling studies of gaseous fuel combustion. Particularly, in a microgravity environment, where buoyancy effects are negligible, an effectively strain-rate-free, vigorous flame may be obtained. Such a flame can also provide long residence times and large length scales for practical probing of flame structures and soot processes. This 2-D numerical study explores the feasibility of establishing such a planar diffusion flame in an enclosed container utilizing a realistic test protocol for a microgravity experiment. Fuel and oxygen mixtures, initially segregated into two half-volumes of a squat rectangular container by a thin separator, are ignited as soon as a flammable mixture is formed in the wake of the separator withdrawn in the centerplane. A triple-flame ensues that propagates behind the trailing edge of the separator. The results of calculations show that the mechanically- and thermally-induced convection decays in about two seconds. The establishment of a planar diffusion flame after this period seems feasible in the central region of the container with sufficient quantities of reactants left over for subsequent studies. An analysis of the flame initiation and formation process suggests how the feasibility of creating such a flame can be further improved.

Gokoglu, Suleyman A.↗
NASA NTRS2003

Droplet Combustion in a Slow Convective Flow

The influences of slow convective flow on droplet combustion, particularly in the low Reynolds number regime, have received very little attention in the past. Most studies in the literature are semi-empirical in nature and they were motivated by spray combustion applications in the moderate to high Reynolds number regime. None of the limited number of fundamental theoretical studies applicable to low Reynolds numbers have been verified by rigorous experimental data. Moreover, many unsteady phenomena associated with fluid-dynamic unsteadiness, such as impulsive starting or stopping of a burning droplet, or flow acceleration/deceleration effects, have not been investigated despite their importance in practical applications. In this study we investigate the effects of slow convection on droplet burning dynamics both experimentally and theoretically. The experimental portion of the study involves both ground-based experiments in the drop towers and future flight experiments on board the International Space Station. Heptane and methanol are used as test fuels, and this choice complements the quiescent-environment studies of the Droplet Combustion Experiment (DCE). An analytical model that employs the method of matched asymptotic expansions and uses the ratio of the convective velocity far from the droplet to the Stefan velocity at its surface as the small parameter for expansion has also been developed as a part of this investigation. Results from the ground-based experiments and comparison with the analytical model are presented in this report.

Nayagam, V.↗