SEARCH · Engineering Papers

Results for “Cockpit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Pilot performance

For many years, the emphasis has been placed on the performance of the aircraft, rather than on those who fly the aircraft. This is largely due to the relative safety of flying. Just in the last few years there have been several major accidents that have shown that flying is not quite as safe as it was thought to be. Sixty-five percent of these accidents are a result of pilot performance decrements, and so it is obvious that there is a need to reduce that figure. A study has been mandated to evaluate the performance of pilots. This includes workload, circadium rhythms, jet lag, and any other factors which might affect a pilot's performance in the cockpit. The purpose of this study is to find out when and why the decrement in a pilot's performance occur and how to remedy the situation.

Nicholls, Jennifer↗

NASA NTRS1988

Human factors: Aeronautics

The objectives of the Aeronautics Human Factors Research and Technology program are to provide the technology base and capability to design effective crew-cockpit systems and to advance solutions to human problems affecting air transport and rotorcraft effectiveness and safety. Advanced automation technologies, information display capabilities under computer control, and concern for the effects of human error in flight operations are elements which drive the directions of the program. Thus, the program has four thrusts: flight management, human engineering methods, rotorcraft, and subsonic transports.

Jenkins, James P.↗

NASA NTRS1988

Apollo Lightcraft Project

This second year of the NASA/USRA-sponsored Advanced Aeronautical Design effort focused on systems integration and analysis of the Apollo Lightcraft. This beam-powered, single-stage-to-orbit vehicle is envisioned as the shuttlecraft of the 21st century. The five person vehicle was inspired largely by the Apollo Command Module, then reconfigured to include a new front seat with dual cockpit controls for the pilot and co-pilot, while still retaining the 3-abreast crew accommodations in the rear seat. The gross liftoff mass is 5550 kg, of which 500 kg is the payload and 300 kg is the LH2 propellant. The round trip cost to orbit is projected to be three orders of magnitude lower than the current space shuttle orbiter. The advanced laser-driven 5-speed combined-cycle engine has shiftpoints at Mach 1, 5, 11 and 25+. The Apollo Lightcraft can climb into low Earth orbit in three minutes, or fly to any spot on the globe in less than 45 minutes. Detailed investigations of the Apollo Lightcraft Project this second year further evolved the propulsion system design, while focusing on the following areas: (1) man/machine interface; (2) flight control systems; (3) power beaming system architecture; (4) re-entry aerodynamics; (5) shroud structural dynamics; and (6) optimal trajectory analysis. The principal new findings are documented. Advanced design efforts for the next academic year (1988/1989) will center on a one meter+ diameter spacecraft: the Lightcraft Technology Demonstrator (LTD). Detailed engineering design and analyses, as well as critical proof-of-concept experiments, will be carried out on this small, near-term machine. As presently conceived, the LTD could be constructed using state of the art components derived from existing liquid chemical rocket engine technology, advanced composite materials, and high power laser optics.

Myrabo, Leik N.↗

NASA NTRS1989

B-737 flight test of curved-path and steep-angle approaches using MLS guidance

A series of flight tests were conducted to collect data for jet transport aircraft flying curved-path and steep-angle approaches using Microwave Landing System (MLS) guidance. During the test, 432 approaches comprising seven different curved-paths and four glidepath angles varying from 3 to 4 degrees were flown in NASA Langley's Boeing 737 aircraft (Transport Systems Research Vehicle) using an MLS ground station at the NASA Wallops Flight Facility. Subject pilots from Piedmont Airlines flew the approaches using conventional cockpit instrumentation (flight director and Horizontal Situation Indicator (HSI). The data collected will be used by FAA procedures specialists to develop standards and criteria for designing MLS terminal approach procedures (TERPS). The use of flight simulation techniques greatly aided the preliminary stages of approach development work and saved a significant amount of costly flight time. This report is intended to complement a data report to be issued by the FAA Office of Aviation Standards which will contain all detailed data analysis and statistics.

Branstetter, J. R.↗

NASA NTRS1989

Results of an A109 simulation validation and handling qualities study

The results for the validation of a mathematical model of the Agusta A109 helicopter, and subsequent use of the model as the baseline for a handling qualities study of cockpit centerstick requirements, are described. The technical approach included flight test, non-realtime analysis, and realtime piloted simulation. Results of the validation illustrate a time- and frequency-domain approach to the model and simulator issues. The final A109 model correlates well with the actual aircraft with the Stability Augmentation System (SAS) engaged, but is unacceptable without the SAS because of instability and response coupling at low speeds. Results of the centerstick study support the current U.S. Army handling qualities requirements for centerstick characteristics.

Eshow, Michelle M.↗

NASA NTRS1987

Three beam-combining schemes in a color projection display

Several beam-combining schemes for on-axis and off-axis optical system layout are presented. The on-axis approaches include two crossed plates with dichroic coatings placed at 90 deg, with respect to each other, and a pentaprism arrangement. The off-axis layout of the cathode ray tubes requires that the images be combined at the display screen. These image-combining approaches are compared for the standard television rates of 525 lines and the high-resolution television at 1200/2000 lines under development in Japan. It is concluded that, for the high-performance, high-color fidelity, and high-resolution projection systems, which are expected to fit into a small volume of space such as a Space Station display or a cockpit panoramic display, a folded configuration with either crossed plates or pentaprism plates will result in an optimum color display.

Scholl, Marija S.↗

NASA NTRS1988

Langley Research Center resources and needs for manned space operations simulation

This paper describes current simulation research activities carried out at the Langley Research Center in the areas of remotely controlled operations, task performance, and analytical operations, along with early simulators developed at the center. Special attention is given to the center's current space simulation capabilities which are applicable to manned space operation studies, including the Advanced Concepts Simulator (ACS) and a computer-generated imagery (CGI). The ACS was designed to represent an aircraft cockpit for flight operations in the 1990s but will be also suitable for simulating a variety of astronaut work station applications. The CGI, scheduled for delivery in 1989, will be able to provide out-the-window scenes representative of many operational tasks from rendezvous and docking/berthing to control of telerobotic devices.

Nunamaker, Robert R.↗

NASA NTRS1988

An interactive grid generation technique for fighter aircraft geometries

This paper describes an interactive procedure to construct grids about fighter aircraft using a state-of-the-art workstation. The aircraft are characterized by a fuselage with an integrated canopy over the cockpit, an engine inlet, an area ruled midsection, canards, and highly-swept cranked delta wings or strakes integrated into the wings and tail surfaces. The grid topology, configuration surface grid, exterior grid computation, and computational interactive process are addressed.

Smith, Robert E.↗

NASA NTRS1988

Stereo 3-D and non-stereo presentations of a computer-generated pictorial primary flight display with pathway augmentation

Stereo 3-D was researched as a means to present cockpit displays which enhance a pilot's situational awareness while maintaining a desirable level of mental workload. The initial study at the NASA Langley Research Center used two different pathways-in-the-sky to augment a computer-generated pictorial primary flight display. One pathway resembled the outline of signposts, while the other pathway resembled a monorail. That display was configured for a curved approach to a landing such as could be used in a Microwave Landing System (MLS) approach. It could also be used for military transports which would have to fly a precision curved pathway. Each trial was initialized with the pilot on the desired flight path. After 2 seconds, he suddenly was shifted to one of eight flight path offsets. The pilot was then required to make the initial pitch and/or roll input to correct back to the nominal flight path. As soon as the input was made, the trial was over. No input was required for control trials with no flight path offset. Pilots responded statistically significantly faster when the display was presented in the stereo version than when it was presented in the nonstereo version.

Nataupsky, Mark↗

NASA NTRS1988

A model of electronic map interpretation

This paper describes an experiment that provides data for the development of a cognitive model of pilot flight navigation. The model views navigation as a process involving the alignment of mental images with the perceptual view out of the cockpit. The data support a three stage model: (1) the perceptual encoding of the map display, (2) mental rotation of the mental image, and (3) comparison of the image to the environment. The variables that significantly influence the processes embodied in the model in decreasing importance are: speed of processing, display sequencing, map complexity, and rotation angle of the map. The model can be used as a preliminary computational tool in predicting the navigational component of pilot situational awareness.

Aretz, Anthony J.↗

NASA NTRS1988

Human workload in aviation

The application of human-factors analysis techniques to the evaluation of aircraft-crew workloads is discussed in an introductory overview. Consideration is given to the importance of workload for safety, crew size, automation, and certification; the definition and measurement of workload, physical vs mental workloads, subjective ratings, secondary tasks, biocybernetic measures, and attention and workload. Recent studies of pilot and ATC workloads are reviewed, and typical data are presented in graphs. Future trends are discussed, and it is predicted that increased cockpit automation will eventually require new methods to maintain operator attention rather than reduce workload.

Kantowitz, Barry H.↗

NASA NTRS1988

Aircrew fatigue and circadian rhythmicity

Recent statistical and experimental studies on the role of circadian rhythms in aircrew fatigue and aviation accidents are reviewed from a human-factors perspective, and typical data are presented in extensive graphs. Consideration is given to the biological clock and the limits of endurance, circadian desynchronization, sleep and sleepiness, short-haul and long-haul operational studies, and the potential advantages of cockpit automation.

Graeber, R. Curtis↗

NASA NTRS1988

The helmet-mounted visual system in flight simulation

An account is given of the application of fiber-optic helmet-mounted display systems to flight simulation tasks for complex combat mission scenarios involving numerous external aircraft, audible communications, and various types of threats. Such helmets, which although custom-made for each pilot are far less expensive than image-projection systems, consist of two 3-in. diameter 'optical pancake windows' mounted in front of the pilot's eyes to which images are transferred through fiber-optic cables from four high-brightness light-valve projectors. Head-position information is provided by an optical tracking system. The pancake window displays are semitransparent and allow cockpit controls and displays to be viewed normally.

Cook, Anthony M.↗

NASA NTRS1989

An expert system for wind shear avoidance

A study of intelligent guidance and control concepts for protecting against the adverse effects of wind shear during aircraft takeoffs and landings, with current emphasis on developing an expert system for wind shear avoidance, is reported. Principal objectives are to develop methods for assessing the likelihood of wind shear encounter (based on real-time information in the cockpit), for deciding what flight path to pursue (e.g., takeoff abort, landing go-around, or normal climbout or glide slope), and for using the aircraft's full potential for combating wind shear. This study requires the definition of both deterministic and statistical techniques for fusing internal and external information, for making go/no-go decisions, and for generating commands to the aircraft's autopilot and flight directors for both automatic and manually controlled flight. The development is described of the windshear safety advisor, an expert system for pilot aiding that is based on the FAA Windshear Training Aid, a two-volume manual that presents an overview, pilot guide, training program, and substantiating data providing guidelines for this initial development. The windshear safety advisor expert system contains over 200 rules and is coded in the LISP programming language.

Stengel, Robert F.↗

NASA NTRS1990

General-Purpose Data-Formatting Input/Output System

Multiplexable input/output (I/O) system developed as interface between host computer and real-time, fixed-base simulator cockpit. Unit designed to be general-purpose interface and operated through virtually any 8- or 16-bit, transistor/transistor-logic-level, parallel-I/O port with or without handshaking. Accepts byte-coded data in form of data blocks from host computer and routes data to various system I/O modules like discrete outputs, lamp drivers, and seven-segment-display drivers. Formats and routes data from input modules back to host computer. Other modules designed to drive alphanumeric displays and communications interfaces and to serve as analog-to-digital and digital-to-analog converter modules.

Busquets, Anthony M.↗

NASA NTRS1989

Display interface concepts for automated fault diagnosis

An effort which investigated concepts for displaying dynamic system status and fault history (propagation) information to the flight crew is described. This investigation was performed by developing several candidate display formats and then conducting comprehension tests to determine those characteristics that made one format preferable to another for presenting this type of information. Twelve subjects participated. Flash tests, or limited time exposure tests, were used to determine the subjects' comprehension of the information presented in the display formats. It was concluded from the results of the comprehension tests that pictographs were more comprehensible than both block diagrams and text for presenting dynamic system status and fault history information, and that pictographs were preferred over both block diagrams and text. It was also concluded that the addition of this type of information in the cockpit would help the crew remain aware of the status of their aircraft.

Palmer, Michael T.↗

NASA NTRS1989

Preliminary design of a family of three close air support aircraft

A family of three Close Air Support aircraft is presented. These aircraft are designed with commonality as the main design objective to reduce the life cycle cost. The aircraft are low wing, twin-boom, pusher turbo-prop configurations. The amount of information displayed to the pilot was reduced to a minimum to greatly simplify the cockpit. The aircraft met the mission specifications and the performance and cost characteristics compared well with other CAS aircraft. The concept of a family of CAS aircraft seems viable after preliminary design.

Cox, Brian↗

NASA NTRS1990

Delivery performance of conventional aircraft by terminal-area, time-based air traffic control: A real-time simulation evaluation

A description and results are presented of a study to measure the performance and reaction of airline flight crews, in a full workload DC-9 cockpit, flying in a real-time simulation of an air traffic control (ATC) concept called Traffic Intelligence for the Management of Efficient Runway-scheduling (TIMER). Experimental objectives were to verify earlier fast-time TIMER time-delivery precision results and obtain data for the validation or refinement of existing computer models of pilot/airborne performance. Experimental data indicated a runway threshold, interarrival-time-error standard deviation in the range of 10.4 to 14.1 seconds. Other real-time system performance parameters measured include approach speeds, response time to controller turn instructions, bank angles employed, and ATC controller message delivery-time errors.

Credeur, Leonard↗