Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Sonochemical fabrication of Cu{sub 2}O@C/graphene nanohybrid with a hierarchical architecture

A three-dimensional Cu{sub 2}O@C/graphene nanohybrid hierarchical sphere-like architecture has been successfully synthesized by a sonochemical method. The as-prepared nanocomposite has been characterized using various techniques including powder X-ray diffraction, scanning electron microscopy, field emission transmission electron microscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and Fourier transmission infrared spectrometry. Secondary big hierarchical Cu{sub 2}O@C spheres (diameter of ∼200 nm) consist of primary small Cu{sub 2}O@C spheres (diameter of 5–10 nm), which are uniformly distributed on the graphene surface. In the primary small Cu{sub 2}O@C sphere, amorphous carbon is formed by the oxidation–reduction reaction between 1-aminopyrene and copper(II) acetate in the sonochemical process. Our facile sonochemical method may apply to the preparation of other metal oxide/graphene hierarchical nanohybrids. - Highlights: • The Cu{sub 2}O@C/graphene nanohybrid hierarchical architecture was obtained. • Secondary big hierarchical Cu{sub 2}O@C spheres (diameter of ∼200 nm) consist of primary small Cu{sub 2}O@C spheres (diameter of 5–10 nm). • 1-Aminopyrene serves as a “binding agent” operating through the π–π interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of synthesis condition on product formation: hydrothermal auto-oxidated synthesis of five copper halides with ratio of Cu(I)/Cu(II) in 1:1, 2:1, 3:1, 4:1 and 1:0

The hydrothermal synthesis and structural characterization of five copper iodides derived from chelated ligands, 1, 10-phenanthroline (phen), ethylenediamine (en) and 1, 3-propanediamine, are reported. Except monovalent copper compound 1 ((phen)Cu{sub 3}I{sub 3}1), other four compounds ([Cu(phen){sub 2}I][CuI{sub 2}] 2, [Cu(phen){sub 2}I][Cu{sub 3}I{sub 4}] 3, [Cu(en){sub 2}][Cu{sub 4}(phen){sub 2}I{sub 6}] 4 and [Cu(1, 3-propanediamine){sub 2}][CuI{sub 2}]{sub 2}5) are mixed-valent Cu(I)-Cu(II) compounds by partially auto-oxidated from Cu(I). Supramolecular frameworks of these compounds can be assembled by C/N-H...I hydrogen bonds, Cu(I)-Cu(I) interaction, weak Cu-I semicoordinate interaction, C-H...{pi} and {pi}-{pi} stacking interactions. It's noteworthy that we find hydrothermal synthesis under higher pH value, higher synthesis temperature and longer reaction time can obtain higher ratio of Cu(I)/Cu(II) copper iodides and organic ligand with lower steric hinderance is prone to coordinated with divalent copper to form cation unit. Finally, the fluorescent study shows 1 exhibits intense orange-red luminescence with long lifetime at 293 K and more intense emission and longer lifetime at 77 K. Moreover, the room temperature EPR spectra of above five compounds not only show the valence of copper but demonstrate the coordination environment of Cu(II) centre. - Graphical abstract: The influence of hydrothermal synthesis condition on the ratio of Cu(I)/Cu(II) of five copper iodides, with 1:0, 1:1, 3:1, 4:1, 2:1, respectively, is deduced and the rivalrousness of 1,10-phenanthroline, ethylenediamine and 1, 3-propanediamine is discussed as well. The fluorescent study shows 1 exhibits intense orange-red luminescence with long lifetime ({tau}=1.25 {mu}s) at 293 K and more intense emission and longer lifetime({tau}=6.95 {mu}s) at 77 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology-controlled electrodeposition of Cu{sub 2}O microcrystalline particle films for application in photocatalysis under sunlight

Graphical abstract: Display Omitted Highlights: ► PEG was used to electro-deposit Cu{sub 2}O microcrystalline particle films. ► Morphologies of Cu{sub 2}O microcrystals could be controlled by the amount of PEG. ► The films showed regularly varied photocatalytic activities under sunlight. ► The films could be recycled and showed stable activities. -- Abstract: Morphology-controlled Cu{sub 2}O microcrystalline particle films had been successfully electrodeposited on tin-doped indium oxide glass substrates in CuSO{sub 4} solutions containing different amounts of polyethylene glycol (PEG) additives. With an increase of PEG, microcrystals gradually changed from irregular shapes to cubes, octahedrons, and spherical shapes. Sizes increasingly became smaller with an increase of PEG under the same deposition time. These films had been first used as recyclable photocatalysts and showed excellent and photocatalytic activities in photodegradation of methylene blue (MB) under sunlight. Activities were regularly varied relative to the morphologies of films controlled by the amount of PEG and could be further enhanced by adding a little amount of hydrogen peroxide in the MB solution. The method for controllable preparation of Cu{sub 2}O microcrystals with photocatalytic activities was simple and inexpensive. The as-prepared particle films could also be used in photodegradation of many other pollutants under sunlight.

36 MATERIALS SCIENCE↗

Thermal-Conductive Boards Based on Aluminum with an Al{sub 2}O{sub 3} Nanostructured Layer for Products of Power Electronics

The experimental results of electrical and thermal characteristics of circuit boards based on aluminum with a nanostructured layer of anodic aluminum oxide and copper conductors for assembling high-power field-effect transistors have been considered. It has been shown that the presence of a thin dielectric layer and thick aluminum base with high thermal conductivity provides a uniform distribution of heat generated by the active element over the entire volume of the board without formation of local regions with increased temperature. The experimental results have shown that the temperature gradient between the heat source and anodic aluminum oxide surface is about 17–18°C at a surface heat power of 4.4 W/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accelerated Cu2O Reduction by Single Pt Atoms at the Metal-Oxide Interface§

The reducibility of metal oxides, when serving as the catalyst support or the active sites themselves, plays an important role in heterogeneous catalytic reactions. Here we present an integrated experimental and theoretical study that reveals how the addition of small amounts of atomically dispersed Pt at the metal/oxide interface dramatically enhances the reducibility of a Cu2O thin film by H2. X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD) results reveal that upon oxidation, a PtCu single-atom alloy (SAA) surface is covered by a thin Cu2O film and is therefore unable to dissociate H2. Despite this, in situ studies using ambient pressure (AP) XPS reveal that the presence of a small amount of Pt under the oxide layer can, at the single-atom limit, promote the reduction of Cu2O by H2 at room temperature. We build two density functional theory based surface models to better understand these experimental findings: A Cu2O/Cu(111)-like surface oxide layer, known as the ‘29’ oxide, in which Pt is alloyed into the Cu(111) surface as well as a PtCu SAA. Our calculations suggest that the increased activity is due to the presence of atomically dispersed Pt under the surface oxide layer, which weakens the Cu-O bonds in its immediate vicinity, thus making the interface between subsurface Pt and the surface oxide a nucleation site for the formation of metallic Cu. This initial step in the reduction process results in the presence of surface Pt atoms surrounded by metallic Cu patches, and the Pt atoms become active in H2 dissociation, which consequently accelerates the reduction of the oxide layer. This work demonstrates how isolated Pt atoms at the metal/oxide interface of a Cu-based catalyst accelerate the reduction of the oxide and, therefore, helps maintain the active, reduced state of the catalyst under reaction conditions, as is required for the synthesis of methanol from CO2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization and manipulation of highly concentrated copper single atoms by high entropy oxides

Facile and controllable methodologies capable of providing single atom catalysts (SACs) with high-density active metal sites and sintering-resistance under harsh conditions are highly desired and grand challenges in heterogeneous catalysis. Herein, the entropy effect was leveraged to stabilize and manipulate the electronic properties of copper SACs. The as-developed ultrasonication-driven approach could integrate highly concentrated Cu SAs within the lattice of fluorite-structured high entropy oxide (HEFO) under ambient conditions (CuO-HEFO). The dual benefits from the high entropy effect of the support and the in-situ lattice engineering led to the generation of abundant Cu 1+ species and oxygen defects, together with ultra-high stability and sintering-resistance under extremely harsh conditions. This was confirmed by deploying non-high entropy support (CuO-CeO 2 ) or Cu sites located on the surface of HEFO (CuO@HEFO). In conclusion, the catalytic activity of CuO-HEFO surpassed that of CuO-CeO 2 and CuO@HEFO in CO oxidation together with well-maintained long-term stability and resistance to gas impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Parameters of Nuclear Quadrupole Interaction and Spatial Distribution of Electronic Defects in YBa{sub 2}Cu{sub 3}O{sub 7} and La{sub 2–x}Sr{sub x}CuO{sub 4} Lattices

The comparison of calculated and experimental parameters of nuclear quadrupole interaction in the sites of crystal lattice of YBa{sub 2}Cu{sub 3}O{sub 7} and La{sub 2–x}Sr{sub x}CuO{sub 4} superconducting copper metal oxides has shown that effective charges of all atoms of superconducting ceramic lattices correspond to standard rates of their oxidation, except the atoms of chain and planar oxygen in YBa{sub 2}Cu{sub 3}O{sub 7} lattice and atoms of planar oxygen in La{sub 2–x}Sr{sub x}CuO{sub 4} lattice, whose decreased charge is interpreted as a result of hole localization in the corresponding sublattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A compositional gradient Ce1−xZrxO2 buffer architecture for producing high-performance YBCO film

Highlights: • The compositional gradient CZO buffer architecture can help improve the biaxial texture of YBCO film. • The high density stacking faults are directly observed via a spherical aberration corrected transmission electron microscope. • The enhanced flux pinning force and current-carrying capacity of YBCO films are achieved as a result of lattice strains. - Abstract: In this work, YBCO films were epitaxially grown on Ce{sub 1−x}Zr{sub x}O{sub 2} (CZO) buffered yttria stabilized zirconia (YSZ) single crystal substrates through a fluorine-free sol-gel process. The influence of two different CZO buffer architectures on the microstructure and superconducting properties of YBCO films was investigated. According to XRD results in combination with (S)TEM analysis, it was confirmed that YBCO film grown on the gradient CZO buffer layer (CZO-G) exhibits better in-plane and out-of-plane texture than YBCO film deposited on the uniform CZO buffer layer (CZO-20). And besides, the superconducting performances especially the current-carrying capacity under magnetic field of the former was much higher than that of the latter, which means that the enhanced flux pinning force will be presented in YBCO film on CZO-G buffer layer. The maximum pinning force of the YBCO film grown on CZO-G buffer architecture is up to 17.67 GN/m{sup 3} @ 65 K. HR-STEM analysis shows that the stacking faults within YBCO matrix gave rise to the considerable nanoscale lattice-strains which may suppress the formation of Copper pairs and produce nanoscale non-superconducting regions served as pinning centers to significantly improve the flux pinning performance of YBCO film. Given the above, it has been implied that high-performance YBCO coated conductor can be developed by using a compositional gradient Ce{sub 1−x}Zr{sub x}O{sub 2} films as buffer architecture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Copper substrate as a catalyst for the oxidation of chemical vapor deposition-grown graphene

We report the catalytic effect of copper substrate on graphene–oxygen reaction at high temperature. Previous studies showed that graphene grown on copper are mostly defect-free with strong oxidation resistance. We found that a freshly prepared copper-supported graphene sample can be completely oxidized in trace amount of oxygen (<3 ppm) at 600 °C within 2 h. Both X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) suggest that upon ambient air exposure, oxygen molecules diffuse into the space between graphene and copper, resulting in the formation of copper oxide which acts as catalytic sites for the graphene-oxygen reaction. This result has important implications for the characterization, processing, and storage of copper-supported graphene samples. - Graphical abstract: The copper substrate enhances the thermel oxidation of single-layer graphene. - Highlights: • A copper-supported graphene can be oxidized in Ar (O{sub 2}<3 ppm, 600 °C, 2 h). • O{sub 2} intercalates between graphene and copper upon exposure to air. • The copper foil should not be considered as an inert substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Test of 6-kVA Three-Phase Flux Transfer-Type Current-Limiting Transformer

A 6-kVA three-phase model of the flux transfer-type current-limiting transformer was developed and tested. In this device, the winding loops of YBCO superconducting tapes couple magnetically two independent iron cores: the primary-side iron core and the secondary-side iron core. The former and the latter are equipped with copper primary and secondary windings, respectively. Because the magnetic fluxes linked to the superconducting winding loops must be kept constant, the magnetic flux is transferred by the superconducting YBCO loops between the two iron cores in order to couple magnetically the primary and secondary coils. While the YBCO loops are superconducting, 100 % of the magnetic flux is transferred and the device shows the similar function as usual transformers. Once the YBCO loops become normal by a fault current in any of the windings, the power transfer between two iron cores is limited and the current in the secondary winding is limited naturally on a result of decoupling the iron cores.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting Phase Diagram of the Yttrium, Barium, and YBa-core in YBa{sub 2}Cu{sub 3}O{sub 7–δ} by an Ising Model

We investigate the temperature dependent of magnetizations, hysteresis properties and present the superconducting phase diagrams of the YBa{sub 2}Cu{sub 3}O{sub 7–δ} (YBCO) by an Ising model within the effective-field theory. We obtain the magnetizations of the YBCO and its components (Cu1, Cu2, O1, O2, O3, O4, Ba, Y, CuO-shell, YBa-core, and total YBCO) versus the reduced temperature and external magnetic field. We find that the copper atoms have two different magnetizations (Cu1 and Cu2) and oxygen atoms have four different magnetizations (O1, O2, O3, O4) but yttrium and barium has one magnetization. The differences in the magnetizations of the copper and oxygen atoms result from the lattice location of them on the YBCO lattice. The magnetization of the Cu1 atoms is the lowest and the yttrium is highest than those of the others; hence magnetizations of the YBCO increase from the corner to inner of the orthorhombic YBCO lattice. We also find that the YBa-core, yttrium and barium atoms of the YBCO exhibit superconductivity behaviors. Therefore, Y–Ba core, yttrium and barium atoms have the superconducting phase diagram and it has Meissner, vortex, and normal states. It is also found that the upper critical coercive field (H{sub c2}) and the critical vortex temperature (T{sub v}) of the Ba are high than those of the Y and YBa-core.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CuMn2O4/graphene nanosheets as excellent anode for lithium-ion battery

Highlights: • Spinel CuMn{sub 2}O{sub 4} and CuMn{sub 2}O{sub 4}/rGO are synthesized via a reflux route. • The electrochemical properties of CuMn{sub 2}O{sub 4}/rGO for LIBs are firstly explored. • CuMn{sub 2}O{sub 4}/rGO composites display a good battery performance. • Capacities of 1148 and 935 mA h g{sup −1} can be maintained after 20 and 150 cycles. - Abstract: Spinel copper manganese oxide (CuMn{sub 2}O{sub 4}) is synthesized via a reflux route and studied as anode for lithium-ion battery for the first time. In this work, graphene nanosheets are incorporated into the CuMn{sub 2}O{sub 4} composites to enhance the cycling performance of CuMn{sub 2}O{sub 4} material. Graphene nanosheets not only provide enough void space to buffer the volume expansion/contraction but also afford a conductive network to enhance the conductivity. The as-obtained CuMn{sub 2}O{sub 4}/graphene composites deliver a high discharge specific capacity of 935 mA h g{sup −1} after 150 cycles at a current density of 50 mA g{sup −1}. Additionally, reaction mechanism studies indicate that CuMn{sub 2}O{sub 4} transforms into nano-sized hybrid of CuO-MnO with a spongy porous structure during discharge-charge processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Production of highly tritiated water for tritium exposure studies

Tritium Facility staff at Chalk River Laboratories (CRL) have successfully prepared highly tritiated water for use in radiation resistance of PEM (Proton Exchange Membrane-based)electrolyser membrane. The goal of System A was to convert a known amount of elemental tritium (HT) into tritiated water vapour using a copper(II) oxide bed, and to condense the tritiated water vapour into a known amount of chilled heavy water (D{sub 2}O). The conversion and capture of tritium using this system is close to 100%. The goal of System B was to transfer tritiated water from the containment vessel to an exposure vessel (experiment) in a controlled and safe manner. System B is based on the pushing of D{sub 2}0 with low-pressure argon carrier gas to a calibrated volume and then to the exposure vessel. A method for delivering a known and controlled amount of tritiated water has been successfully demonstrated at CRL. Using both systems Tritium Facility staff have made and distributed highly tritiated water in a safe and controlled manner. This paper focuses on how the tritiated water was produced and dispensed to the experiment.

07 ISOTOPE AND RADIATION SOURCES↗

New Insights about CuO Nanoparticles from Inelastic Neutron Scattering

Inelastic Neutron Scattering (INS) spectroscopy has provided a unique insight into the magnetodymanics of nanoscale copper (II) oxide (CuO). We present evidence for the propagation of magnons in the directions of the ordering vectors of both the commensurate and helically modulated incommensurate antiferromagnetic phases of CuO. The temperature dependency of the magnon spin-wave intensity (in the accessible energy-range of the experiment) conforms to the Bose population of states at low temperatures (T ≤ 100 K), as expected for bosons, then intensity significantly increases, with maximum at about 225 K (close to TN), and decreases at higher temperatures. The obtained results can be related to gradual softening of the dispersion curves of magnon spin-waves and decreasing the spin gap with temperature approaching TN on heating, and slow dissipation of the short-range dynamic spin correlations at higher temperatures. However, the intensity of the magnon signal was found to be particle size dependent, and increases with decreasing particle size. This “reverse size effect” is believed to be related to either creation of single-domain particles at the nanoscale, or “superferromagnetism effect” and the formation of collective particle states.

43 PARTICLE ACCELERATORS↗

Active Quenching Technique for YBCO Tapes: Quench Acceleration and Protection

The application of resistive-type superconducting fault current limiters (RSFCLs) in electrical networks is very attractive due to their relative compactness, light weight, and good performance. However, this technology still has drawbacks: asymmetrical quench, uncertain limiting velocity, passive action and incapability of enlarging capacity. Here, we present an active quenching technique which can potentially solve these problems. The quenching process is triggered using high-frequency (HF) AC fields, which are generated by two coupled copper coils attached on both sides of the YBCO sample. Our experiments show that this approach is effective in guaranteeing uniform quench and therefore is expected to be able to significantly extend the service life of the device. Moreover, the quench speed can be considerably increased by the HF field. We find that the performance of acceleration is positively correlated to the transport current, intensity and frequency of the AC field. In addition, a DC magnetic field is added around the sample holder simultaneously with the AC field, to study the field-angular-frequency dependence of the quench time t(B{sub AC}f{sub AC}B{sub DC}𝜃{sub DC}). Experimental results prove that the DC magnetic field can cooperate with the HF AC field to accelerate quench, which means better performance can be produced with lower costs with the two fields acting together. In all, this technique showed outstanding performance regarding quench acceleration and tape protection. We believe the HF-assisted quenching technology has a promising future in current-limiting devices and hope our findings could be helpful for its potential applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of CuAl{sub 1−x}M{sub x}O{sub 2} (M = Fe, Cr)/Ni film delafossite compounds using spin coating and their microstructure and dielectric constant

The discovery of delafossite compound has encouraged more rapid technological developments particularly in transparent electronic devices. Copper oxide-based transparent thin films delafossite semiconductor recently give much attention in the field of optoelectronic technology, after the discovery of p-type CuAlO{sub 2}. The potential applications of a p-type semiconductor transparent conductive oxides (TCO) have been applied in broad field of optoelectronics. To explore a broad physical properties interms of magnetic conducting subtitution is understudied. In this work we report the fabrication of delafossite film on Ni substrate and their characterization of CuAl{sub 1−x}M{sub x}O{sub 2} delafossite compounds doped with Cr{sup 3+} and Fe{sup 3+} from the raw material of Cu(NO{sub 3}){sub 2}@@‡3H{sub 2}O, Al(NO{sub 3}){sub 3}@@‡9H{sub 2}O, Fe(NO{sub 3}){sub 3}@@‡9H{sub 2}O and Cr(NO{sub 3}){sub 3}@@‡9H{sub 2}O. The films were prepared using spin coating through a sol-gel technique at various concentrations of x = 0, 0.03, 0.04, and 0.05 for chromium and x = 0, 0.02, 0.04, 0.06, and 0.08 for iron doped. Crystal and microstructure were characterized by means of Cu-Kα Bragg-Brentano X-RD followed by High Score Plus and SEM-EDAX. The dielectric constants of the films were characterized using LCR meter. It was found that the CuAl{sub 1−x}M{sub x}O{sub 2}/Ni delafossite films were successfully fabricated. The CuAl{sub 1−x}Fe{sub x}O{sub 2} compound crystallized with lattice parameters of a = b ranged from 2.8603 Å to 2.8675 Å and c ranged from 16.9576 to 17.0763 Å. The increase of the dopant give rise to the increase of the lattice parameters. Since iron has bigger ionic radius (69 pm) than original site of Al{sup 3+} with radius of 53 pm the crystal volume lattice also increase. Further analyses of increasing volume of the crystal, as expected, affected to the decreasing of its dielectric constant. The similar trends also shown by Cr{sup 3+} doped of CuAl{sub 1−x}Cr{sub x}O{sub 2} films with smaller effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Copper-Cobalt-Cerium Ternary Oxide as an Additive to a Conventional Platinum-Group-Metal Catalyst for Automotive Exhaust Catalysis

Recently, we reported on a ternary mixed-oxide catalyst that showed low-temperature CO oxidation activity under lean exhaust conditions without inhibition by hydrocarbons such as propene. However, the hydrocarbon oxidation activity of this Cu–Co–Ce (CCC) catalyst cannot be considered as a stand-alone solution to low-temperature automotive exhaust catalysis. To achieve both low-temperature oxidation of pollutants and a reduction in the total platinum-group-metal (PGM) content, we examined a 50 % physical mixture of traditional Pt/Al 2 O 3 and our CCC catalyst in two simulated exhaust protocols. Using this physical mixture, we were able to obtain equivalent or better hydrocarbon activity than the baseline Pt/Al 2 O 3 catalyst with half the total PGM content as well as increased sulfur tolerance for the CCC component of the mixture. Diffuse reflectance infrared Fourier transform spectroscopy data confirmed that despite exposure of sulfur-sensitive CCC to SO 2 , Cu + -carbonyl binding sites could still be seen if the catalyst was mixed with Pt/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonequilibrium Quasiparticle Dynamics in Bi-Based Superconductors Measured by Modulation Photoexcitation Spectroscopy

We develop an orbital angular momentum (OAM) excitation pump-probe (Pp) spectroscopy and perform experiments on a Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+δ} (Bi2212) superconductor. The OAM modulation for the pump is realized by using a transverse mode conversion technique which allows to modulate the chirality of the optical OAM with a fixed polarization. The result reveals a difference of the OAM-dependent transient reflectivity changes below T{sub c}, indicating that the pump OAM can break the chiral symmetry of the superconducting (SC) state. The OAM dependences of the transient signal imply that the quasi-particle (QP) excitation with OAM enhances the SC with opposite chirality and/or suppress the SC with equal chirality. The temperature dependence of the OAM dynamics shows virtually no pairing fluctuation that usually appears in the QP dynamics observed by conventional Pp, suggesting that the nonequilibrium OAM dynamics is sensitive to the delocalized OAM associated with long range order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗