Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Synthesis of carbon nanotube/anatase titania composites by a combination of sol-gel and self-assembly at low temperature

A simple method is described for the synthesis of carbon nanotube/anatase titania composites by a combination of a sol-gel method with a self-assembly technique at 65 {sup o}C. This method makes use of polyelectrolyte for wrapping multi-walled carbon nanotube (MWCNT) and providing them with adsorption sites for electrostatically driven TiO{sub 2} nanoparticle deposition. The composites were characterized using X-ray diffraction, transmission electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy, and photoluminescence for analyzing their crystal phase, microstructure, particle size, and other physicochemical properties. The results showed that MWCNT were covered with an anatase TiO{sub 2} thin layer or surrounded by an anatase TiO{sub 2} thick coating, which is constructed of TiO{sub 2} particles about 6 nm in size. The composites were rich in surface hydroxyl groups. The excited e{sup -} in conduction band of TiO{sub 2} may migrate to MWCNT. Concerning the potential applicability, MWCNT/TiO{sub 2} composites showed excellent photocatalytic activity toward the photodegradation of methyl orange. -- Graphical abstract: MWCNT/anatase TiO{sub 2} composites have been prepared by a combination of a sol-gel method and a self-assembly technique in one step at low temperature without high temperature calcination. Display Omitted Highlights: {yields} MWCNT/anatase TiO{sub 2} composites could be prepared in one-pot at low temperature. {yields} MWCNT were covered with a TiO{sub 2} thin layer or surrounded by a TiO{sub 2} thick coating. {yields} Composites were rich in surface hydroxyl groups. {yields} Composites showed excellent photodegradation activity of methyl orange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extremely Highly Volume Reduction of r-Cs Contaminated Wastes by Using Ion Exchanging Chromatography - 18248

Calcination or melting processes remove radio-Cs from contaminated soil and incineration ashes when appropriate amounts of CaO and CaCl{sub 2} are added. The byproducts from the heat treatment system are concentrated water-soluble alkali chlorides, mainly composed of KCl with small amounts of CsCl contaminated with radio-Cs. These methods may effectively reduce the volume of wastes to as much as 1/100. the initial volume in the best condition. Further volume reduction from the concentrated salts is investigated by using ion-exchange chromatography of transitional metal ferrocyanides. Copper ferrocyanide (CuFeCN) is chosen as the optimum salt as it has a high ion selectivity coefficient of 2.75 x 10{sup 4} and ion-exchange capacity of 0.29 mmol/g. This CuFeCN is supported by porous silica gel carrier and is used in the ion-exchange column. A solution containing 1.34 M of KCl and 1.34 mM of CsCl labelled with Cs-137 is flowed through the column. A maximum of 80% absorbing capacity of CuFeCN and 99.9% removal efficiency of radio-Cs are achieved. Because the used adsorbent contains a high concentration of radio-Cs, it must be solidified and scattering or leaching out must be prevented. Therefore, 10 g of the used adsorbent is mixed with 20 g of meta-kaolin, 7 g of NaOH, and 18 g of water and the 'geopolymer' mixture is solidified under room temperature. No ratio-Cs release is detected from this solidified material when it is immersed in sea water or pure water for a month at 40 deg. C. Using the proposed method, the final volume of the waste could be reduced to approximately 1/10,000. the initial volume. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

AN ACID BAKING APPROACH TO ENHANCE RARE EARTH ELEMENT RECOVERY FROM BITUMINOUS COAL SOURCES

Rare earth elements (REE) are a group of 17 elements typically classified as light and heavy rare earth elements, which play a crucial role in developing the latest technologies for energy, defense, and medical sectors. Even though REEs have been found in more than 200 minerals, only bastnaesite, monazite and xenotime are commercially exploited for REE extraction. However, the recent exponential increase in REE demand has spurred countries such as the United States into research for the extraction of REEs from secondary sources such as coal, acid mine drainage, and coal ash. Several coal sources (e.g., Fire Clay seam coal) across the United States have been identified to contain elevated concentrations of rare earth elements (>600 ppm), and various researchers have investigated the feasibility of both physical and hydrometallurgical extraction techniques for rare earth concentration and subsequent extraction. However, both physical and direct leaching were concluded to be inefficient for RE beneficiation and extraction due to low recoveries. Alternatively, thermal treatment provides promising means for RE recovery from bituminous coal sources. The positive impact of thermal treatment/calcination was established to be due to the decarbonization and dehydroxylation of the clays, which released entrapped rare earth elements within the dominant minerals and converted them into an acid-soluble form. Nonetheless, the improvement in recovery was limited to the light REEs (LREEs) with an insignificant increase in the heavy REEs (HREE). It was demonstrated that the light and heavy REEs in the material were associated with difficult-to-leach minerals such as monazite, xenotime, and zircon, which were not decomposed by simple calcination due to their high thermal stability. Hence, roasting in the presence of chemicals was necessary to ensure the decomposition of those REE-containing minerals. As such, this study was focused on the acid baking treatment of bituminous coals with an aim to enhance REE recovery, especially HREEs. Based on the presence of REE minerals like monazite and xenotime, three pre-leach treatment methods, i.e., 1) roasting, 2) direct acid baking, and 3) acid baking after roasting were investigated. Roasting tests at 600 ⁰C revealed that the recovery of light REEs (LREEs) was enhanced while the recovery of HREEs remained relatively unaffected. LREE and HREE recovery values of 38.3% and 21.3%, respectively, were achieved using a 50 g/L sulfuric acid solution at 5% solid concentration and a solution temperature of 75 ⁰C for 2 hours. Comparatively, direct acid baking at 250 °C provided substantial increased LREE and HREE recovery values to approximately 49.4% and 53.0%, respectively, using an equivalent acid dosage. Recoveries were maximized to 77.0% and 79.6% for LREE and HREE, respectively, by roasting followed by acid baking. Similar results were obtained from the treatment of a second bituminous coal source. Due to strong correlations between REE and Al recovery values, tests were performed on kaolinite and illite, which were prominent clay minerals within the source coals. These experiments revealed that the REE recovery improvements were likely a result of dehydroxylation of clays and subsequent release and decomposition of REE-bearing minerals such as monazite, xenotime and zircon. Subsequently, a parametric study was conducted to identify the impact of acid baking parameters on rare earth element recovery. The factors investigated using a three-level statistical experimental program were acid baking time, acid solution concentration, baking temperature, and acid solution-to-solids ratio which were found to significantly impact REE and contaminant element (Al, Fe, and Ca) recovery. An increase in baking temperature up to around 250 ⁰C improved the light and heavy REE recovery values by more than 50 absolute percentage points relative to performances achieved when direct leaching. As aforementioned, acid baking was needed to both decompose the clay minerals and liberate the REE minerals, which allowed access for the acid to solubilize the REEs. Acid concentration of the solution used for acid baking was studied as a means of minimizing the amount of acid needed to achieve a target REE recovery. However, thermo-gravimetric and differential scanning calorimetry analysis (TGA-DSC) of sulfuric acid under oxidizing atmosphere revealed that the addition of water decreased the evaporation temperature, which explains the lower REE recovery values obtained when using acid concentrations less than 100%. Using pure sulfuric acid at an acid-to-solid ratio of 0.8:1 resulted in recovery values of around 70% for both LREEs and HREEs. The decomposition reaction time was relatively quick with 65% of the TREEs recovered within the first 10 minutes. Following the identification of optimum operating conditions through the parametric study, a systematic leaching study was carried out to examine the impact of leaching parameters, such as solid-to-liquid (S/L) ratio, temperature, and time, on REE recovery using acid baking conditions of 1:1 acid to solids ratio at 250 °C for 30 minutes. The solid-to-liquid ratio was varied from 1-20% by weight at 25 °C, 50 °C, and 75 °C solution temperatures. The results indicated that reaction time and solution temperature considerably impacted the recovery of heavy and light REEs. Interestingly, LREE recovery reduced from 68% at 5% S/L to 58% at 20%S/L, whereas HREE recovery of 78% remained unaffected. The decrease in the LREE recovery was determined to be due to La and Ce precipitation, likely through isomorphic substitution with calcium in gypsum. The kinetic data indicated that 67% LREE and 77% HREE recovery could be obtained within the first 15 minutes of the reaction, suggesting fast reaction kinetics. Furthermore, raising the solution temperature from 25 °C to 75 °C increased the LREE and HREE recovery from 60% and 32% to 67% and 79%, respectively. The kinetic modeling results demonstrated that the rate-limiting step in the LREE dissolution was diffusion and chemical reaction, whereas the HREE extraction was controlled by only chemical reaction. The leaching study concluded that using 20% S/L at 75 °C for 15 minutes maximized LREE and HREE recovery. The lab-scale precipitation study showed that Fe and Al in solution could be removed at pH 4.5 followed by REE precipitation at pH 6.0 using 6 mol/L NaOH. Finally, the bench-scale data was used to develop a process flowsheet for REE recovery from low-grade bituminous coal sources using acid baking. Finally, based on the proposed flowsheet, a concentrated RE-cake obtained through selective precipitation at pH 6.5 was re-leached using HCl at pH 1.5. The resultant leachate was used to identify the impact of various operating parameters on REE recovery and purity with an aim to maximize REE precipitation efficiency while minimizing the oxalic acid dosage. The operating parameters for this investigation were oxalic acid dosage, iron (III) contamination, solution pH and temperature. The resultant model suggested that oxalic acid dosage and reaction pH are the most significant factors for the REE precipitation efficiency, followed by the interaction of oxalic dosage and Fe concentration. Test results indicated that increasing the oxalic acid concentration from 0g/L to 80g/L improved the REE precipitation efficiency from approximately 4.2% to 95.0%. Furthermore, raising the solution pH from 0.5 to 2.5 considerably enhanced the precipitation efficiency from 0.0% to 98.9%. A solution temperature elevation decreased REE recovery, which indicated an exothermic reaction between REEs and oxalate anions. Finally, a high level of Fe contamination adversely impacted REE precipitation efficiency. The speciation analysis revealed that the dominant iron species in the solution system were Fe-(C₂O₄)₃³⁻, Fe-(C₂O₄)²⁻, and Fe-(C₂O₄)⁺, which consumed the majority of the oxalate anions

rare earth elements, acid baking, high-temperature↗

Mechanistic Studies of Methanol Oxidation to Formaldehyde on Isolated Vanadate Sites Supported on High Surface Area Anatase

The mechanism for methanol oxidation on both TiO{sub 2} and V/TiO{sub 2} was investigated using temperature-programmed experiments with in-situ infrared spectroscopy. Infrared and Raman spectroscopy, along with XANES, show that the V/TiO{sub 2} sample consists predominantly of isolated VO{sub 4} units after calcination. Methanol was found to adsorb on the catalyst in three ways at 323 K: (1) molecularly, (2) across Ti-O-Ti bonds to form Ti-OCH{sub 3}/Ti-OH pairs, and (3) across V-O-Ti bonds to form V-OCH{sub 3}/Ti-OH pairs. Upon heating, two desorption peaks for CH{sub 3}OH and H{sub 2}O were observed on all samples below 500 K. Although TiO{sub 2} produced small amounts of CH{sub 2}O, the addition of vanadium greatly enhanced the rate of formaldehyde formation. Also, on the V/TiO{sub 2} samples, it was noticed that the Ti-OCH{sub 3} groups disappear much more rapidly than on TiO{sub 2} alone. This is likely due to the reverse spillover of methoxide species from Ti to V, with the reaction occurring at lower temperatures at the vanadium center. Formate species were also detected during the experiments, and they are assumed to be intermediates in the decomposition of formaldehyde to CO, CO{sub 2}, and H{sub 2}O. The apparent activation energy of V/TiO{sub 2} for the formation of CH{sub 2}O is 16 kcal/mol.

10 SYNTHETIC FUELS↗

NEPTUNIUM OXIDE PROCESSING

The Savannah River Site's HB-Line Facility completed a campaign in which fifty nine cans of neptunium oxide were produced and shipped to the Idaho National Laboratory in the 9975 shipping container. The neptunium campaign was divided into two parts: Part 1 which consisted of oxide made from H-Canyon neptunium solution which did not require any processing prior to conversion into an oxide, and Part 2 which consisted of oxide made from additional H-Canyon neptunium solutions which required processing to purify the solution prior to conversion into an oxide. The neptunium was received as a nitrate solution and converted to oxide through ion-exchange column extraction, precipitation, and calcination. Numerous processing challenges were encountered in order make a final neptunium oxide product that could be shipped in a 9975 shipping container. Among the challenges overcome was the issue of scale: translating lab scale production into full facility production. The balance between processing efficiency and product quality assurance was addressed during this campaign. Lessons learned from these challenges are applicable to other processing projects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanistic Studies of Methanol Oxidation to Formaldehyde on Isolated Vanadate Sites Supported on High Surface Area Zirconia

The oxidation of methanol on both ZrO{sub 2} and V/ZrO{sub 2} was investigated using temperature-programmed experiments together with in situ infrared spectroscopy. Characterization of V/ZrO{sub 2} after calcination by Raman spectroscopy and XANES shows that the vanadium is present as isolated VO{sub 4} units in a distorted tetrahedral geometry. Methanol was found to adsorb dissociatively on both Zr-O-Zr and V-O-Zr species to create Zr-OCH{sub 3}/Zr-OH and V-OCH{sub 3}/Zr-OH pairs, respectively. Upon heating, CH{sub 3}OH and H{sub 2}O desorb initially from all samples. Above 423 K, surface formate species are detected while H{sub 2} and CO are the main products formed on ZrO{sub 2}. Upon addition of vanadium, CH{sub 2}O production increases dramatically during temperature-programmed reaction. The absence of CH{sub 2}O during temperature-programmed desorption and oxidation experiments on V/ZrO{sub 2} is likely due to rapid readsorption of the product onto the ZrO{sub 2} support, leading to the formation of formate species and H{sub 2}. The apparent activation energy for V/ZrO{sub 2} is 18 kcal/mol. The activities of isolated vanadate species supported on SiO{sub 2}, TiO{sub 2}, and ZrO{sub 2} are compared and discussed.

10 SYNTHETIC FUELS↗

DEVELOPMENT OF GLASS COMPOSITIONS TO IMMOBILIZE ALKALI, ALKALINE EARTH, LANTHANIDE AND TRANSITION METAL FISSION PRODUCTS FROM NUCLEAR FUEL REPROCESSING

The Advanced Fuel Cycle Initiative (AFCI) waste management strategy revolves around specific treatment of individual or groups of separated waste streams. A goal for the separations processes is to efficiently manage the waste to be dispositioned as high level radioactive waste. The Advanced Fuel Cycle Initiative (AFCI) baseline technology for immobilization of the lanthanide (Ln) and transition metal fission product (TM) wastes is vitrification into a borosilicate glass. A current interest is to evaluate the feasibility of vitrifying combined waste streams to most cost effectively immobilize the wastes resulting from aqueous fuel reprocessing. Studies showed that high waste loadings are achievable for the Ln only (Option 1) stream. Waste loadings in excess of 60 wt % (on a calcined oxide basis) were demonstrated via a lanthanide borosilicate (LaBS) glass. The resulting glasses had excellent relative durability as determined by the Product Consistency Test (PCT). For a combined Ln and TM waste stream glass (Option 2), noble metal solubility was found to limit waste loading. However, the measured PCT normalized elemental releases for this glass were at least an order of magnitude below that of Environmental Assessment (EA) glass. Current efforts to evaluate the feasibility of vitrifying combined Ln, TM, alkali (Cs is the primary radionuclide of concern) and alkaline earth (Sr is the primary radionuclide of concern) wastes (Option 3) have shown that these approaches are feasible. However, waste loading limitations with respect to heat load (Cs/Sr loading), molybdenum solubility and/or noble metal solubility will likely be realized and must be considered in determining the cost effectiveness of these approaches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Manipulation of Edge‐Site Fe–N 2 Moiety on Holey Fe, N Codoped Graphene to Promote the Cycle Stability and Rate Capacity of Li–S Batteries

Abstract Graphene‐based materials have been widely studied to overcome the hurdles of Li–S batteries, but suffer from low adsorptivity to polar polysulfide species, slow mass transport of Li + ions, and severe irreversible agglomeration. Herein, via a one‐step scalable calcination process, a holey Fe, N codoped graphene (HFeNG) is successfully synthesized to address these problems. Diverging by the holey structures, the Fe atoms are anchored by four N atoms (Fe–N 4 moiety) or two N atoms (Fe–N 2 moiety) localized on the graphene sheets and edge of holes, respectively, which is confirmed by X‐ray absorption spectroscopy and density functional theory calculations. The unique holey structures not only promote the mass transport of lithium ions, but also prohibit the transportation of polysulfides across these additional channels via strong adsorption forces of Fe–N 2 moiety at the edges. The as‐obtained HFeNG delivers a high rate capacity of 810 mAh g −1 at 5 C and a stable cycling performance with the capacity decay of 0.083% per cycle at 0.5 C. The concept of holey structure and introduction of polar moieties could be extended to other carbon and 2D nanostructures for energy storage and conversion devices such as supercapacitors, alkali‐ion batteries, metal–air batteries, and metal–halogen batteries.

Wang, Yazhou↗

Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life

Single crystalline Na4Mn9O18 nanowires were synthesized via pyrolysis of polyacrylate salt precursors prepared by in-situ polymerization of the metal salts and acrylate acid, followed by calcinations at an appropriate temperature to achieve good crystalline structure and uniform nanowire morphology with an average diameter of 50 nm. The Na4Mn9O18 nanowires have shown a high, reversible, and near theoretical sodium ion insertion capacity (128 mA h g-1 at 0.1C), excellent long cyclability (77% capacity retention for 1000 cycles at 0.5 C), along with good rate capability. Good capacity and charge-discharge stability are also observed for full cell experiments using a pyrolyzed carbon as the anode, therefore demonstrating the potential of these materials for sodium-ion batteries for large scale energy storage. Furthermore, this research shows that a good crystallinity and small particles are required to enhance the Na-ion diffusion and increase the stability of the electrode materials for long charge-discharge cycles.

Cathode material↗

Solvent-Free Self-Assembly to the Synthesis of Nitrogen-Doped Ordered Mesoporous Polymers for Highly Selective Capture and Conversion of CO 2

A solvent-free induced self-assembly technology for the synthesis of nitrogen-doped ordered mesoporous polymers (N-OMPs) is developed, which is realized by mixing polymer precursors with block copolymer templates, curing at 140–180 °C, and calcination to remove the templates. This synthetic strategy represents a significant advancement in the preparation of functional porous polymers through a fast and scalable yet environmentally friendly route, since no solvents or catalysts are used. The synthesized N-OMPs and their derived catalysts are found to exhibit competitive CO 2 capacities (0.67–0.91 mmol g -1 at 25 °C and 0.15 bar), extraordinary CO 2 /N 2 selectivities (98–205 at 25 °C), and excellent activities for catalyzing conversion of CO 2 into cyclic carbonate (conversion >95% at 100 °C and 1.2 MPa for 1.5 h). Finally, the solvent-free technology developed in this work can also be extended to the synthesis of N-OMP/SiO 2 nanocomposites, mesoporous SiO 2 , crystalline mesoporous TiO 2 , and TiPO, demonstrating its wide applicability in porous material synthesis.

36 MATERIALS SCIENCE↗

Interfacial Lattice-Strain-Driven Generation of Oxygen Vacancies in an Aerobic-Annealed TiO 2 (B) Electrode

Oxygen vacancies play crucial roles in defining physical and chemical properties of materials to enhance the performances in electronics, solar cells, catalysis, sensors, and energy conversion and storage. Conventional approaches to incorporate oxygen defects mainly rely on reducing the oxygen partial pressure for the removal of product to change the equilibrium position. However, directly affecting reactants to shift the reaction toward generating oxygen vacancies is lacking and to fill this blank in synthetic methodology is very challenging. In this work, a strategy is demonstrated to create oxygen vacancies through making the reaction energetically more favorable via applying interfacial strain on reactants by coating, using TiO 2 (B) as a model system. Geometrical phase analysis and density functional theory simulations verify that the formation energy of oxygen vacancies is largely decreased under external strain. Benefiting from these, the obtained oxygen-deficient TiO 2 (B) exhibits impressively high level of capacitive charge storage, e.g., ≈53% at 0.5 mV s –1 , far surpassing the ≈31% of the unmodified counterpart. Meanwhile, the modified electrode shows significantly enhanced rate capability delivering a capacity of 112 mAh g –1 at 20 C (≈6.7 A g –1 ), ≈30% higher than air-annealed TiO 2 and comparable to vacuum-calcined TiO 2 . This work heralds a new paradigm of mechanical manipulation of materials through interfacial control for rational defect engineering.

36 MATERIALS SCIENCE↗

Flash Recycling of Graphite Anodes

The ever-increasing production of commercial lithium-ion batteries (LIBs) will result in a staggering accumulation of waste when they reach their end of life. A closed-loop solution, with effective recycling of spent LIBs, will lessen both the environmental impacts and economic cost of their use. Presently, <5% of spent LIBs are recycled and the regeneration of graphite anodes has, unfortunately, been mostly overlooked despite the considerable cost of battery-grade graphite. Here, in this work, an ultrafast flash recycling method to regenerate the graphite anode is developed and valuable battery metal resources are recovered. Selective Joule heating is applied for only seconds to efficiently decompose the resistive impurities. The generated inorganic salts, including lithium, cobalt, nickel, and manganese, can be easily recollected from the flashed anode waste using diluted acid, specifically 0.1 M HCl. The flash-recycled anode preserves the graphite structure and is coated with a solid-electrolyte-interphase-derived carbon shell, contributing to high initial specific capacity, superior rate performance, and cycling stability, when compared to anode materials recycled using a high-temperature-calcination method. Life-cycle-analysis relative to current graphite production and recycling methods indicate that flash recycling can significantly reduce the total energy consumption and greenhouse gas emission while turning anode recycling into an economically advantageous process.

36 MATERIALS SCIENCE↗

A General Approach for Metal Nanoparticle Encapsulation Within Porous Oxides

Abstract Encapsulation of metal nanoparticles within oxide materials has been shown as an effective strategy to improve activity, selectivity, and stability in several catalytic applications. Several approaches have been proposed to encapsulate nanoparticles, such as forming core‐shell structures, growing ordered structures (zeolites or metal‐organic frameworks) on nanoparticles, or directly depositing support materials on nanoparticles. Here, a general nanocasting method is demonstrated that can produce diverse encapsulated metal@oxide structures with different compositions (Pt, Pd, Rh) and multiple types of oxides (Al 2 O 3 , Al 2 O 3 ‐CeO 2 , ZrO 2 , ZnZrO x , In 2 O 3 , Mn 2 O 3 , TiO 2 ) while controlling the size and dispersion of nanoparticles and the porous structure of the oxide. Metal@polymer structures are first prepared, and then the oxide precursor is infiltrated into such structures and the resulting material is calcined to form the metal@oxide structures. Most Pt@oxides catalysts show similar catalytic activity, demonstrating the availability of surface Pt sites in the encapsulated structures. However, the Pt@Mn 2 O 3 sample showed much higher CO oxidation activity, while also being stable under aging conditions. This work demonstrated a robust nanocasting method to synthesize metal@oxide structures, which can be utilized in catalysis to finely tune metal‐oxide interfaces.

Zhou, Chengshuang↗

Preventing Electrolyte Decomposition on a Ca Metal Electrode Interface Using an Artificial Solid‐Electrolyte Interphase

Abstract Calcium ion batteries are gaining attention as alternatives to lithium‐ion technology because they offer comparable properties at reduced cost and improved safety. However, progress has been limited because of the inability to efficiently and reversibly plate and strip Ca metal anodes in organic electrolytes. Moreover, the inorganic components of the solid‐electrolyte interphase (SEI) that form via decomposition of the electrolyte often do not allow for the diffusion of Ca ions. In this work, an approach combining density functional theory and ab initio molecular dynamics (AIMD) simulations is utilized to show that the use of a preformed artificial SEI layer of amorphous can potentially prevent electrolyte decomposition. First, Ca is shown to be able to intercalate into an amorphous layer (up to Ca 1.5 Al 2 O 3 ) and diffuse through on a reasonable time scale. Through calculation of the density of states, the system is found to remain insulating up to the equilibrium stoichiometry. Finally, AIMD simulations with a realistic organic electrolyte environment are used to show that this calcinated layer completely prevents the decomposition of solvent molecules. This approach can provide a route to efficient rechargeable Ca ion batteries, paving the way for cheap large‐scale energy storage.

Young, Joshua↗

Metal–Organic Framework‐Derived ZnO/ZnS Heteronanostructures for Efficient Visible‐Light‐Driven Photocatalytic Hydrogen Production

Abstract Developing highly active, recyclable, and inexpensive photocatalysts for hydrogen evolution reaction (HER) under visible light is significant for the direct conversion of solar energy into chemical fuels for various green energy applications. For such applications, it is very challenging but vitally important for a photocatalyst to simultaneously enhance the visible‐light absorption and suppress photogenerated electron–hole recombination, while also to maintain high stability and recyclability. Herein, a metal–organic framework (MOF)‐templated strategy has been developed to prepare heterostructured nanocatalysts with superior photocatalytic HER activity. Very uniquely, the synthesized photocatalytic materials can be recycled easily after use to restore the initial photocatalytic activity. It is shown that by controlling the calcination temperature and time with MOF‐5 as a host and guest thioacetamide as a sulfur source, the chemical compositions of the formed heterojunctions of ZnO/ZnS can be tuned to further enhance the visible‐light absorption and photocatalytic activity. The nanoscale heterojunction ZnO/ZnS structural feature serves to reduce the average free path of charge carriers and improve the charge separation efficiency, thus leading to significantly enhanced HER activity under visible‐light irradiation (λ > 420 nm) with high stability and recyclability without any cocatalyst.

08 HYDROGEN↗

Iridium Oxide Coordinatively Unsaturated Active Sites Govern the Electrocatalytic Oxidation of Water

A special membrane electrode assembly to measure operando X-ray absorption spectra and resonant photoemission spectra of mesoporous templated iridium oxide films is used. These films are calcined to different temperatures to mediate the catalyst activity. By combining operando resonant photoemission measurements of different films with ab initio simulations these are able to unambiguously distinguish µ 2 -O (bridging oxygen) and µ 1 -O (terminal oxygen) in the near-surface regions of the catalysts. The intrinsic activity of iridium oxide scales with the formation of µ1-O (terminal oxygen) is found. Importantly, it is shown that the peroxo species do not accumulate under reaction conditions. Rather, the formation of µ 1 -O species, which are active in O-O bond formation during the OER, is the most oxidized oxygen species observed, which is consistent with an O-O rate-limiting step. Thus, the oxygen species taking part in the electrochemical oxidation of water on iridium electrodes are more involved and complex than previously stated. This result highlights the importance of employing theory together with true and complementary operando measurements capable of probing different aspects of catalysts surfaces during operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Wadsley Defects and Cation Disorder to Enhance MoNb 12 O 33 Diffusion

Wadsley-Roth (WR) niobates have emerged as high-rate anode materials that can combine rapid ionic diffusion with good electronic conductivity. WR compounds have been defect-enhanced by limited annealing, however, such materials often contain multiple types of defects. In particular, both Wadsley defects (variable block size) and transition metal disorder have the potential to modify transport rates, however the corresponding effects are not well understood mechanistically. Here, MoNb 12 O 33 (MNO) was calcined at two different temperatures to compare a defect-rich condition (MNO-800) with a proximal order-rich condition (MNO-900) as assessed through XRD, XANES, EXAFS, and STEM characterizations. Galvanostatically cycled lithium half cells of MNO-800 exhibited additional capacity (307 mAhg −1 at 0.1C, 4.66% higher) and improved high-rate capacity of 200 mAhg −1 at 10C. ICI-based overpotential analysis identified solid state diffusion as the dominant rate limiting process where MNO-800 correspondingly exhibited ∼3X faster capacity-weighted diffusivity. A machine-learning interatomic potential was trained to density functional theory and then applied with molecular dynamics (MLIP-MD) to examine the possible roles of Wadsley defects and transition metal disorder. For both defect-types, Li was found to populate and activate fast diffusion paths from window sites at lower extents of lithiation as compared to the order-rich model.

defect↗

Monitoring Structural and Electronic Changes of Supported Metal Catalysts Using Combined X‐Ray Techniques

Supported metal nanoparticle catalysts have become increasingly crucial for many catalytic applications. However, long-term catalyst stability remains a problem due to catalyst deactivation caused by coke formation and sintering. The deposition of a thin overcoating via atomic layer deposition (ALD) onto metal-supported nanoparticles has shown to greatly inhibit catalyst deactivation. This work utilizes a model catalyst system comprised of Pt nanoparticles supported on Al 2 O 3 to demonstrate the effect of an atomically thin overcoating on supported metal nanoparticles. Continuous operando small-angle X-ray scattering (SAXS) and X-ray absorption near edge spectroscopy (XANES) monitor structural and electronic changes to the catalyst and overcoating during calcination. SAXS data fitting reveals the formation of nanopores in the overcoating at high temperatures, while XANES monitors the oxidation state of the Pt catalyst. Herein, the usefulness of combined X-ray techniques is demonstrated to characterize supported metal catalysts to further understanding of the synergistic effects of the ALD overcoating to aid in the design of new catalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗