Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary layer flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Spacecraft contamination: Sources and prevention; Thermophysics Conference, 18th, Montreal, Canada, June 1-3, 1983, Selected Papers

Results of current research in the field of spacecraft contamination are presented. An overview of the various sources of contamination is given, showing the many and diverse mechanisms associated with the degradation of thermal and optical performance of spacecraft surfaces and optics. Some of the causes of contamination are discussed, including spallation of foam insulation on cryogenic fuel tanks, dispersion of particle contamination about a spacecraft, particle contamination of optical sensors, and the influence of the location of venting systems. Contamination prevention is addressed. Infrared transmittance and infrared optical properties of contaminants are considered along with the effects and properties of mixtures of exhaust species, of plume boundary layer flow, and of the contamination associated with bipropellant attitude control thrusters proposed for the Galileo spacecraft. Also discussed are: degradation of 'clean' thermal control surfaces over four years in orbit, in-orbit measurement of solar absorptance, and contamination from postfire efflux of a solid-propellant rocket motor.

Roux, J. A.↗
NASA NTRS1985

Flame flashback in a premixed dump combustor

A stainless steel, rectangular center-dump, premixed-prevaporized combustor was used at the NASA Lewis Research Center to study flashback in controlled conditions simulating gas turbine combustor operations under steady-state and transient conditions. The combustor allowed visual access to the combustion area, and was operated at inlet air temperatures from 600 to 850 K, premixer wall temperatures from 450 to 900 K, and average premixer velocity from 40 to 80 ft/s. A parametric study revealed a slight decrease in the flashback equivalence ratio as the inlet air temperatures increased. It also indicated that the premixer wall temperature and premixer velocity are not governing parameters of flashback. It is suggested that flashback occurs through the premixer wall boundary layer flow reversal caused by combustion instability.

Proctor, M. P.↗
NASA NTRS1985

Experimental study of forward-located jet-interaction nozzles

The effects of forward-mounted sonic jet-interaction nozzles with one, three equal, or one large and two small orifices on the transitional or turbulent boundary-layer flow over a biconic (9-deg-25-arcmin/6-deg) model at angle of attack -10 to the 15 deg and Reynolds number 8.10 x 10 to the 6th/ft are investigated experimentally using pressure taps, force measurements, oil-flow visualization, and schlieren photography in the 20-in. Mach-6 wind tunel at NASA Langley. The injection flow rates are 0.055 and 0.026 lbm/s, with stagnation pressure 500 psia, stagnation temperature 1000 R, and dynamic pressure 8.7 psia. The results are presented in diagrams, graphs, and photographs and characterized. Moment amplification factors of 1.0 or better (maximum 1.8 at angle of attack 15 deg and flow rate 0.055 lbm/s) are observed for all nozzle types, but the configuration with three unequal orifices is found to give improvements of 10 percent over the single-orifice nozzle at a given flow rate.

Cavalleri, R. J.↗
NASA NTRS1985

Boundary layer control of nocturnal convection associated with a synoptic scale system

Well defined nocturnal convection, together with distinct maximum precipitation events in Nebraska, were associated with strong diurnal wind oscillations at 850 mb in Oklahoma, Kansas and Missouri in the present study of pronounced precipitation and low level circulation variations over the Great Plains on May 5-10, 1979. A numerical prediction model, used to relate boundary layer flow modulations to synoptic scale flow for this case, is driven by a diurnal cycle. Experimental forecasts displayed diurnal wind modulations at 500 m, with rising motions of the order of 4 cm/sec at the 2200 m level, along the leading edge of the nocturnal jet.

Astling, E. G.↗
NASA NTRS1986

Aeolian processes aboard a space station: Saltation and particle trajectory analysis

The Carousel wind tunnel (CWT) proposed to study aeolian processes aboard a space station consists of two concentric rotating drums. The space between the two drums comprises the wind tunnel test section. Differential rates of rotation of the two drums would provide a wind velocity with respect to either drum surface. Preliminary results of measured velocity profiles made in a CWT prototype indicate that the wall bounded boundary layer profiles are suitable to simulate flat plate turbulent boundary layer flow. The two dimensional flat plate Cartesian coordinate equations of motion of a particle moving through the air are explained. In order to assess the suitability of CWT in the analysis of the trajectories of windblown particles, a series of calculations were conducted comparing cases for gravity with those of zero gravity. Results from the calculations demonstrate that a wind tunnel of the carousel design could be fabricted to operate in a space station environment and that experiments could be conducted which would yield significant results contributing to the understanding of the physics of particle dynamics.

White, B. R.↗
NASA NTRS1986

Wall layer models for the calculation of velocity and heat transfer in turbulent boundary layers

In the computation of turbulent boundary-layer flows and internal flows, a substantial amount of mesh points and computational effort is required to adequately resolve the intense temperature and velocity profile variations in the near wall region. In this study, analytical profile approximations are obtained for the mean velocity and temperature distribution in the wall layer; these profiles are based upon consideration of the observed coherent structure of the time-dependent wall-layer flow. The profile approximations are relatively simple analytical formulae which satisfy all the required compatibility conditions at the wall and the logarithmic behavior at the edge of the wall layer. The Reynolds analogy for heat transfer is not used in the present theory. A general method for utilizing the present wall-layer profile models in a prediction method is indicated.

Walker, J. D. A.↗
NASA NTRS1986

Wall temperature control of low-speed body drag

The use of thermal means to control drag under turbulent boundary layer conditions is examined. Numerical calculations are presented for both skin friction and (unseparated) pressure drag for turbulent boundary-layer flows over a fuselage-like body with wall heat transfer. In addition, thermal control of separation on a bluff body is investigated. It is shown that a total drag reduction of up to 20 percent can be achieved for wall heating with a wall-to-total-freestream temperature ratio of 2. For streamlined slender bodies, partial wall heating of the forebody can produce almost the same order of total drag reduction as the full body heating case. For bluff bodies, the separation delay from partial wall cooling of the afterbody is approximately the same as for the fully cooled body.

Lin, J. C.↗
NASA NTRS1985

The effects of compliant walls on transition and turbulence

Two theoretical approaches to the phenomenon of drag reduction by a compliant wall are proposed. One is to study the limit cycle oscillations of the Navier-Stokes equations for a boundary layer flow over a compliant wall or a Poiseuille flow in a channel with a compliant wall. The other is a complementary study of a simpler, sequential model, which partially decouples the fluid and wall motions. In this approach, a 'Total Model' is constructed from suitable component models. While the first study is more rigorously based, it will be initially limited, by computational constraints, to relatively low Reynolds numbers. The second, more approximate approach, will allow consideration of a fully developed turbulent flow. The Total Model will predict the compliant wall motion accurately, but will not per se be sufficient to predict the skin friction drag. However, once the wall motion is known, the skin friction drag and the pressure drag can be computed separately, using one of the existing models.

Dowell, E. H.↗
NASA NTRS1986

An upwind algorithm for the parabolized Navier-Stokes equations

A new upwind algorithm based on Roe's scheme has been developed to solve the two-dimensional parabolized Navier-Stokes (PNS) equations. This method does not require the addition of user specified smoothing terms for the capture of discontinuities such as shock waves. Thus, the method is easy to use and can be applied without modification to a wide variety of supersonic flowfields. The advantages and disadvantages of this adaptation are discussed in relation to those of the conventional Beam-Warming scheme in terms of accuracy, stability, computer time and storage, and programming effort. The new algorithm has been validated by applying it to three laminar test cases including flat plate boundary-layer flow, hypersonic flow past a 15 deg compression corner, and hypersonic flow into a converging inlet. The computed results compare well with experiment and show a dramatic improvement in the resolution of flowfield details when compared with the results obtained using the conventional Beam-Warming algorithm.

Lawrence, S. L.↗
NASA NTRS1987

Active Control of Transition and Turbulence

Two active means of manipulating boundary-layer flow developed, one controlling laminar-to-turbulent transition, other controlling amplitude of turbulent fluctuation. Purpose to control skin-friction drag over surfaces inside inlets and ducts. Resulting turbulence downstream has lower skin-friction drag than equivalent flow developing over same surfaces in absence of intervention. Heating strips trigger turbulence while transition amplitude and bandwidth controlled by acoustic signal.

Maestrello, Lucio↗
NASA NTRS1987

Effect of Reynolds number variation on aerodynamics of a hydrogen-fueled transport concept at Mach 6

Two separate tests have been made on the same blended wing-body hydrogen-fueled transport model at a Mach number of about 6 and a range of Reynolds number (based on theoretical body length) of 1.577 to 55.36 X 10 to the 6th power. The results of these tests, made in a conventional hypersonic blowdown tunnel and a hypersonic shock tunnel, are presented through a range of angle of attack from -1 to 8 deg, with an extended study at a constant angle of attack of 3 deg. The model boundary layer flow appeared to be predominately turbulent except for the low Reynolds number shock tunnel tests. Model wall temperatures varied considerably; the blowdown tunnel varied from about 255 F to 340 F, whereas the shock tunnel had a constant 70 F model wall temperature. The experimental normal-force coefficients were essentially independent of Reynolds number. A current theoretical computer program was used to study the effect of Reynolds number. Theoretical predictions of normal-force coefficients were good, particularly at anticipated cruise angles of attack, that is 2 to 5 deg. Axial-force coefficients were generally underestimated for the turbulent skin friction conditions, and pitching-moment coefficients could not be predicted reliably.

Penland, Jim A.↗
NASA NTRS1985

High sensitivity boundary layer transition detector

A high sensitivity differential interferometer has been developed to locate the region where the boundary layer flow changes from laminar to turbulent. Two experimental configurations have been used to evaluate the performance of the interferometer, open shear layer configuration and wind tunnel turbulent spot configuration. In each experiment small temperature fluctuations were introduced as the signal source. Simultaneous cold wire measurements have been compared with the interferometer data. The comparison shows that the interferometer is sensitive to very weak phase variations in the order of .001 the laser wavelength.

Azzazy, M.↗
NASA NTRS1987

Heat transfer and fluid mechanics measurements in transitional boundary layers on convex-curved surfaces

The test section of the present experiment to ascertain the effects of convex curvature and freestream turbulence on boundary layer momentum and heat transfer during natural transition provided a two-dimensional boundary layer flow on a uniformly heated curved surface, with bending to various curvature radii, R. Attention is given to results for the cases of R = infinity, 180 cm, and 90 cm, each with two freestream turbulence intensity levels. While the mild convex curvature of R = 180 cm delays transition, further bending to R = 90 cm leads to no signifucant further delay of transition. Cases with both curvature and higher freestream disturbance effects exhibit the latter's pronounced dominance. These data are pertinent to the development of transition prediction models for gas turbine blade design.

Wang, T.↗
NASA NTRS1984

Diffusive-convective vapor transport across horizontal and inclined rectangular enclosures

The enhancement of vapor transport across horizontal and inclined rectangular (two-dimensional) enclosures by expansive convection is studied numerically for a range in Grashof number that extends up to boundary layer flow. Comparison is made with predictions of the simplifying model and resulting analytical treatment of Klosse and Ullersma (1973) for various aspect ratios of the enclosure. The influence of varying Schmidt and Prandtl numbers is investigated. Solutions for interfacial (growth) flux and temperature distributions are given, showing practically important nonuniformities.

Markham, B. L.↗
NASA NTRS1988

Boundary layer development as a function of chamber pressure in the NASA Lewis 1030:1 area ratio rocket nozzle

Through the use of theoretical predictions of fluid properties and experimental heat transfer and thrust measurements, the zones of laminar, transitional, and turbulent boundary layer flow were defined for the NASA Lewis 1030:1 area ratio rocket nozzle. Tests were performed on the nozzle at chamber pressures from 350 to 100 psia. For these conditions, the throat diameter Reynolds numbers varied from 300,000 to 1 million. The propellants used were gaseous hydrogen and gaseous oxygen. Thrust measurements and nozzle outer wall temperature measurements were taken during the 3-sec test runs. Comparison of experimental heat transfer and thrust data with the corresponding predictions from the Two-Dimensional Kinetics (TDK) nozzle analysis program indicated laminar flow in the nozzle at a throat diameter Reynolds number of 320,000 or chamber pressure of 360 psia. Comparison of experimental and predicted heat transfer data indicated transitional flow up to and including a chamber pressure of 1000 psia. Predicted values of the axisymmetric acceleration parameter within the convergent and divergent nozzle were consistent with the above results. Based upon an extrapolation of the heat transfer data and predicted distributions of the axisymmetric acceleration parameter, transitional flow was predicted up to a throat diameter Reynolds number of 220,000 or 2600-psia chamber pressure. Above 2600-psia chamber pressure, fully developed turbulent flow was predicted.

Smith, Tamara A.↗
NASA NTRS1988

A multiple-time-scale turbulence model based on variable partitioning of turbulent kinetic energy spectrum

The paper presents a multiple-time-scale turbulence model of a single point closure and a simplified split-spectrum method. Consideration is given to a class of turbulent boundary layer flows and of separated and/or swirling elliptic turbulent flows. For the separated and/or swirling turbulent flows, the present turbulence model yielded significantly improved computational results over those obtained with the standard k-epsilon turbulence model.

Kim, S.-W.↗
NASA NTRS1988

Evolution of resonant wave triads in three-dimensional boundary layers

An analysis is presented that examines the modulation of different instability modes satisfying the triad resonance condition in time and space in a three-dimensional boundary-layer flow. Detuning parameters are used for the wavenumbers and the frequencies. The nonparallelism of the mean flow is taken into account in the analysis. At the leading-edge region of an infinite swept wing, different resonant triads are investigated that are comprised of traveling crossflow, stationary crossflow, vertical vorticity, and Tollmien-Schlichting modes. The spatial evolution of the resonating triad components are studied.

El-Hady, Nabil M.↗
NASA NTRS1987

Infrared surface imaging as a flowfield diagnostic tool

An infrared imaging system supported by a dedicated image processing system was evaluated as a diagnostic tool for aerodynamic research. Results are reported characterizing the system's capability for performing a variety of experimental investigations, such as temperature transients, air velocity distributions, capture of vortices, boundary layer flows, and separated flows over a flat plate with a two-dimensional rearward-facing step.

Gartenberg, Ehud↗