Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BACKSCATTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Forward scattering and backscattering of solar radiation by the stratospheric limb after Mount St. Helens eruption

Stratospheric limb radiance profiles versus altitude of closest approach of the line of sight to the Earth's surface have been measured before and after the Mount St. Helens eruptions by means of photographs taken from a Sun-oriented balloon gondola floating above 35 km altitude over France. Preliminary data were reported for flights in October 1979 and in May and June 1980. The radiance integrated along the line of sight as in-situ radiance (R) can be derived taking into account absorption by ozone and air. The onion peeling inversion method was used to derive the vertical radiance (R) profiles respectively. The values of R were determined in the solar azimuth. The solar elevation angles are chosen larger for the backscattering observation than for the forward scattering observation to deal with as similar illumination conditions as possible despite the Earth's sphericity.

Ackerman, M.↗

User's guide for the Solar Backscattered Ultraviolet (SBUV) and the Total Ozone Mapping Spectrometer (TOMS) RUT-S and RUT-T data sets: October 31, 1978 to November 1, 1980

Raw data from the Solar Backscattered Ultrviolet/Total Ozone Mapping Spectrometer (SBUV/TOMS) Nimbus 7 operation are available on computer tape. These data are contained on two separate sets of RUTs (Raw Units Tapes) for SBUV and TOMS, labelled RUT-S and RUT-T respectively. The RUT-S and RUT-T tapes contain uncalibrated radiance and irradiance data, housekeeping data, wavelength and electronic calibration data, instrument field-of-view location and solar ephemeris information. These tapes also contain colocated cloud, terrain pressure and snow/ice thickness data, each derived from an independent source. The "RUT User's Guide" describes the SBUV and TOMS experiments, the instrument calibration and performance, operating schedules, and data coverage, and provides an assessment of RUT-S and -T data quality. It also provides detailed information on the data available on the computer tapes.

Fleig, A. J.↗

Relating the radar backscattering coefficient to leaf-area index

The relationship between the radar backscattering coefficient of a vegetation canopy, sigma(0) sub can, and the canopy's leaf area index (LAI) is examined. The relationship is established through the development of a model for corn and sorghum and another for wheat. Both models are extensions of the cloud model of Attema and Ulaby (1978). Analysis of experimental data measured at 8.6, 13.0, 17.0, and 35.6 GHz indicates that most of the temporal variations of sigma(0) sub can can be accounted for through variations in green LAI alone, if the latter is greater than 0.5.

Ulaby, F. T.↗

An investigation to model radar backscatter from ridged first year sea ice for the period ending December 31, 1981

The response of the microwave scatterometer to meter scale roughness of first year sea ice was investigated. An empirical, one dimensional model was developed to predict the back scattered power from ridged first year sea ice of known surface topography, by interpreting the surface as a series of angular facets and summing the proportional power from each facet. The model is evaluated by comparing the predicted values to scatterometer measurements obtained during NASA's Sea Ice Radar Experiment (SIRE). The input to the model is surface slope, which for SIRE was calculated from the ice topography, as measured by an airborne laser profiler. The correlation between the predicted and the measured power is .62 to .68. It is concluded that the model adequately describes the backscatter from regions of first year sea ice whose dimensions are of a few tens of meters.

Jackson, B. L. W.↗

An approximate model for backscattering and emission from land and sea

A two-scale model for near nadir backscattering based upon Semyonov's paper is developed for random surfaces with rms surface height smaller than one-half the incident wavelength. Reasonable estimates are obtained when this model is applied to interpret both land and sea measurements. By generalizing this approximate model (not corrected for scattering by small-scale roughnesses for scattering at large incident angles) to the bistatic case and then using it for emission calculations, reasonable estimates near nadir are also obtained when applied to emissions from the bare ground and the sea surfaces.

Fung, A. K.↗

Delineation of estuarine fronts in the German Bight using airborne laser-induced water Raman backscatter and fluorescence of water column constituents

The acquisition and application of airborne laser induced emission spectra from German Bight water during the 1979 MARSEN experiment is detailed for the synoptic location of estuarine fronts. The NASA Airborne Oceanographic Lidar (AOL) was operated in the fluorosensing mode. A nitrogen laser transmitter at 337.1 nm was used to stimulate the water column to obtain Gelbstoff or organic material fluorescence spectra together with water Raman backscatter. Maps showing the location and relative strength of estuarine fronts are presented. The distribution of the fronts indicates that mixing within the German Bight takes place across a relatively large area. Reasonable agreement between the patterns observed by the AOL and published results are obtained. The limitations and constraints of this technique are indicated and improvements to the AOL fluorosensor are discussed with respect to future ocean mapping applications.

Hoge, F. E.↗

Mudrocks examined by backscattered electron microscopy

A method of studying mudrocks is developed using backscattered electrons (BSE) in scanning electron microscopy. Commercially available detectors are utilized to mix the BSE and secondary electron signals in order to obtain the optimum image for a particular material. Thin sections or polished rock chip surfaces are examined with BSE which provides both the atomic number contrast and topographic contrast. This technique provides very detailed information about the form and composition of individual grains in the mudrock thin sections and can be used in studies of the source, mode of deposition, diagenesis, and tectonic deformational history of mudrocks.

Pye, K.↗

L band radar backscatter dependence upon surface wind stress - A summary of new Seasat-1 and aircraft observations

The wind-scale relationships for L band radar wavelengths near 25 cm and 20 deg angle of incidence and HH polarization are reviewed using a number of aircraft and Seasat-1 SAR observations. The dependence of the L band backscatter coefficient from the ocean upon surface wind speed and direction is stated. The wind speed coefficient is 0.5 + or - 0.1 for a wide range of wind speeds. The wind direction coefficient is near zero for lower winds and stable marine boundary layers, but may be 0.20 + or - 0.05 for moderate wind speeds and an unstable marine boundary layer. These results are interpreted in terms of existing theoretical models for radar scattering from the ocean.

Thompson, T. W.↗

Backscattering cascade of beam modes off ambient density fluctuations

The effects of a given nonthermal low-frequency density-fluctuation spectrum on the amplification of Langmuir waves by a 'bump-on-tail' beam of electrons are studied. The density-fluctuation spectrum is assumed to contain a uniform distribution of wavelengths ranging from much shorter than the beam mode wavelength to of the same order. This permits multiple large-angle (back) scattering to occur. One-dimensional numerical solutions of the kinetic equations are found which yield criteria for linear saturation of the beam instability of a cascade of backscattering to high wavenumber. The relevant time scales and spectral shapes are also determined in both the stable and unstable regions. Linear damping and Cerenkov emission by a possible nonthermal tail of electrons is taken into account. An application is made to the beam modes observed simultaneously with density fluctuations off the Jovian bow shock. It is shown that the observed level of density fluctuations is sufficient to saturate the unstable Langmuir waves, although nonthermal Landau damping may prevent a cascade to very high wavenumbers.

Russell, D. A.↗

A comparison between backscattering coefficients using Gaussian and non-Gaussian surface statistics

Backscattering coefficients computed using Gaussian and non-Gaussian surface statistics are compared. The computations are performed for a class of surface-height distributions and surface correlation functions. Results indicate that the coherent component of the scattering coefficient is strongly dependent upon the surface-height distribution. The noncoherent component also depends on the surface-height distribution and the surface root-mean-square (rms) slope when the rms surface height is large relative to the incident wavelength. On the other hand, when the surface rms height is moderate or small, the noncoherent component is sensitive mainly to the surface-height correlation function.

Eom, H. J.↗

On the extraction of atmospheric turbulence parameters from radar backscatter Doppler spectra. Part 1: Theory

A theory is developed for the extraction of r.m.s. velocities of scatterer motions from spectra measured with a Doppler backscatter radar. The effects of finite beam-widths, finite pulse lengths, beam broadening, shear broadening, and the other such spectral contaminants are considered. It is shown that these contaminants can play a major role in determining the measured spectral widths (and, equivalently, the signal fading time), and so must be properly considered if the spectral widths are to be used to extract the r.m.s. motions of the scatterers. It is also shown that these r.m.s. motions can be used to estimate turbulence intensities, in those cases where turbulence is the dominant cause of the scatterer motions.

Hocking, W. K.↗

Development of a global model for atmospheric backscatter at CO2 wavelengths

Several areas of research which contribute to the development of a global model for atmospheric backscatter at CO2 wavelengths are discussed briefly. A computer program was written which fits a bimodal log-normal model to an aerosol size distribution. A ten-layer atmospheric model used to study the effect of gravitational sedimentation on aerosol particle size distribution was expanded by incorporating the transport effect due to vertical diffusion. Future research directions are outlined.

Source record↗

Development of a global model for atmospheric backscatter at CO2 wavelengths

The effect of aerosol microphysical processes on the backscatter from an aerosol plume undergoing long-range atmospheric transport was studied. A numerical model which examines the effects of coagulation and sedimentation on an aerosol size distribution is under development and the initial results for a single homogeneous layer were obtained. Use was made of the SAGE/SAM II data set to study the global variation of aerosol concentration and, hence, to predict the variation of Beta sub CO2. Computer programs were written to determine the mean, median, and the probability distribution of the measured aerosol extinction as a function of altitude, latitude and geographical conditions. The first data sets analyzed in this way are under study. Data was used to study aerosol behavior over the U.S.A. and the Pacific Ocean.

Kent, G. S.↗

Relating the microwave backscattering coefficient to leaf area index

This paper examines the relationship between the microwave backscattering coefficient of a vegetation canopy, sigma (can, 0) and the canopy's leaf area index (LAI). The relationship is established through the development of one model for corn and sorghum and another for wheat. Both models are extensions of the cloud model of Attema and Ulaby (1978). Analysis of experimental data measured at 8.6, 13.0, 17.0, and 35.6 GHz indicates that most of the temporal variations of sigma (can, 0) can be accounted for through variations in green LAI alone, if the latter is greater than 0.5.

Ulaby, F. T.↗

Backscattering coefficient of a perturbed sinusoidal surface

A coherent model for scattering from a randomly perturbed periodic surface is developed using the Kirchhoff approximation. It is intended to model wave scattering from ground surfaces with row directions. Results are illustrated and compared with an incoherent scatter model and measured backscattering angular curves from ploughed fields.

Eom, H. J.↗

Intercomparison of NIMBUS 7 solar backscattered ultraviolet ozone profiles with rocket, balloon, and Umkehr profiles

A global ozone data set covering the two years from November 1978 until October 1980, with an average of 1200 profiles per day, has been produced and archived from the solar backscattered ultraviolet (SBUV) instrument flown on the NIMBUS 7 spacecraft. The SBUV ozone profiles are compared with measurements from chemical and optical sensors launched on balloons and rockets and with ozone profiles obtained from the ground-based Dobson spectrophotometers using the Umkehr method. The biases between the SBUV results and the balloon and Umkehr results are generally less than 10 percent. These biases are functions of layer height and latitude and are believed to be largely due to inconsistencies in the ozone absorption cross sections used for the various measurement systems. The precision of the SBUV measurements is found to be better than 8 percent for pressures between 1 and 64 mbar and better than 15 percent from 64 to 253 mbar.

Bhartia, P. K.↗

Feasibility of determining cloud-top heights using the backscattered ultraviolet satellite observation technique

A technique for determining cloud-top height by means of backscattered ultraviolet (BUV) solar radiation is presented. Cloud-top heights can be inferred using this technique of both the BUV radiance and its degree of polarization are measured by a spacecraft and compared with theoretical values. The cases of satellites with high-inclination orbits and geosynchronous satellites are discussed here. Based on calculations of radiance and polarization, the resolutions of cloud-top height determinations are roughly estimated in both cases. The estimates show that inference is possible as long as the angle between the direction of the sun and the satellite from the point of interest in the atmosphere is larger than about 10 deg. The estimates also indicate that the cloud-top-height resolution depends on solar zenith angle theta(0) in the case of nadir observation by satellites in nonequatorial orbits: The resolution is about 0.5 km for theta(0) = 30 and about 0.3 km for larger theta(0). On the other hand, when observations are made by geosynchronous satellites, the resolution depends strongly on the latitude of the point of interest, alpha(1); a resolution within 0.4 km can be achieved for alpha(1) less than or equal to 65 deg (0.2 km resolution can be obtained for middle latitudes). Resolution becomes rapidly worse with increasing latitude, and alpha(1) = about 70 deg seems to be the limit of observations with this technique.

Aruga, T.↗

Mobile spectrometer measures radar backscatter

The present article is concerned with a helicopter-borne spectrometer (Heloscat), which has been developed to permit high-quality scattering measurements from a mobile platform at remote sites. The term 'spectrometer' referes to a class of scatterometers. The term 'scatterometer' is employed to denote a specialized radar for measuring scattering coefficients as a function of angle. A spectrometer, on the other hand, is a scatterometer which can measure backscatter at several frequencies. The Heloscat system is discussed, taking into account two antennas, RF hardware, and an externally mounted pendulum for angle encoding. A dual-antenna configuration is used for cross-polarized measurements, while a single-antenna system is used for like-polarized measurements. Attention is also given to oscillator characteristics, efficient data handling, and aspects of calibration.

Gogineni, S.↗