Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Alternative Fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Synthesis and sintering of UN-UO 2 fuel composites

In this study, the design and development of an economical, accident tolerant fuel (ATF) for use in the current light water reactor (LWR) fleet is highly desirable for the future of nuclear power. Uranium mononitride has been identified as an alternative fuel with higher uranium density and thermal conductivity when compared to the benchmark, UO 2 , which could also provide significant economic benefits. However, UN by itself reacts with water at reactor operating temperatures. In order to reduce its reactivity, the addition of UO 2 to UN has been suggested. In order to avoid carbon impurities, UN was synthesized from elemental uranium using a hydride-dehydride-nitride thermal synthesis route prior to mixing with up to 10 wt% UO 2 in a planetary ball mill. UN and UN – UO 2 composite pellets were sintered in Ar – (0–1 at%) N 2 to study the effects of nitrogen concentration on the evolved phases and microstructure. UN and UN-UO 2 composite pellets were also sintered in Ar – 100 ppm N 2 to assess the effects of temperature (1700–2000 °C) on the final grain morphology and phase concentration.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Performance and Regulated/Unregulated Emission Evaluation of a Spark Ignition Engine Fueled with Acetone–Butanol–Ethanol and Gasoline Blends

An experimental investigation was conducted on the effect of equivalence ratios and engine loads on performance and emission characteristics using acetone–butanol–ethanol (ABE) and gasoline blends. Gasoline blends with various ABE content (0 vol % to 80 vol % ABE, referred to as G100, ABE10, ABE20, ABE30, ABE60, and ABE80, respectively) were used as test fuels, where the volumetric concentration of A/B/E was 3:6:1. The experiments were conducted at engine loads of 3, 4, 5, and 6 bar brake mean effective pressure at an engine speed of 1200 rpm and under various equivalence ratios (φ = 0.83–1.25). The results showed that ABE addition in the fuel blends could increase brake thermal efficiency and decrease unburned hydrocarbon (UHC), carbon dioxide (CO), and oxynitride (NOx). As for unregulated emissions, acetaldehyde and 1,3-budatiene emissions increased with the increased ABE content in blend fuels. Regarding the aromatic emissions, ABE addition led to a decrease in benzene, toluene, and xylene emissions. The study indicated that ABE could be used as a promising alternative fuel in spark ignition (SI) engines for enhancing the brake thermal efficiency and reducing regulated emissions and aromatic air toxics.

33 ADVANCED PROPULSION SYSTEMS↗

NREL - Advanced Vehicles and Fuels Basics - Center for Transportation Technologies and Systems 2010

We can improve the fuel economy of our cars, trucks, and buses by designing them to use the energy in fuels more efficiently. Researchers at the National Renewable Energy Laboratory (NREL) are helping the nation achieve these goals by developing transportation technologies like: advanced vehicle systems and components; alternative fuels; as well as fuel cells, hybrid electric, and plug-in hybrid vehicles.

13 HYDRO ENERGY↗

Techno-Economic Evaluation of Strategies to Approach Net-Zero Carbon Sustainable Aviation Fuel via Woody Biomass Gasification and Fischer-Tropsch Synthesis

Reducing the carbon dioxide (CO2) emissions from the transportation industry is a key target for achieving global net-zero carbon goals. Wide-spread electrification, efficient engine design, and alternative fuel implementations have been introduced for light-duty vehicles and are projected to significantly reduce light-duty emissions in the near future. Conversely, the aviation sector contributes considerably towards transportation-based carbon emissions, but current projections do not show substantial reductions in carbon emissions over time. Challenges for the aviation sector include low compatibility with electrification, relative inflexibility to variations in fuel properties, and requirement of high energy density fuels. Thus, identifying pathways to decarbonize the aviation sector via liquid low- or net-zero carbon biofuels that are compatible with current aviation infrastructure is crucial. This work investigates the economic feasibility of approaching net-zero carbon sustainable aviation fuel (SAF) from woody biomass via gasification and Fischer-Tropsch synthesis. In doing so, this assessment identifies the economic opportunities and trade-offs of several carbon mitigation strategies coupled with renewable resource interventions required to approach net-zero carbon fuels via biomass. Renewable natural gas and green hydrogen utilization strategies are assessed to examine the impact of fuel yield improvements versus renewable resource cost. Additionally, both carbon capture and sequestration (CCS) and carbon capture and utilization (CCU) are considered in this analysis to help mitigate carbon loss to the atmosphere. Each scenario was assessed on cost, carbon efficiency, energy efficiency, and overall technology-readiness level (TRL). The results of this analysis show that renewable natural gas, green hydrogen, and CCS can be viewed as a low-cost, near-term carbon abatement strategies. However, in the long-term, deployment of more expensive and less technologically mature CCU technologies can make use of point sources of CO2 to boost overall fuel production.

aviation fuel↗

Subtask 1.3 – Integrated Carbon Capture and Storage for North Dakota Ethanol Production

The Energy & Environmental Research Center (EERC), in partnership with Red Trail Energy, LLC (RTE), a North Dakota ethanol producer; the North Dakota Industrial Commission (NDIC) Renewable Energy Program (REP); and the U.S. Department of Energy (DOE), conducted a feasibility and implementation study for a commercial carbon capture and storage (CCS) effort. This subtask provided technical support and developed recommended practices of how small-scale industrial CO2 emitters (<1,000,000 tonnes of CO2 emitted annually) may economically deploy CCS. The 64-million-gallon dry mill RTE ethanol facility, emitting an average 180,000 tonnes of CO2 annually, was the subject of the case study. The positive outcome of this research, which shows technical and economic potential for ethanol–CCS in North Dakota, has resulted in RTE acquiring an approved Permit to Drill on December 2, 2019, for a stratigraphic test well in early 2020, a necessary step toward a North Dakota CO2 Storage Facility Permit (SFP) for the RTE CCS effort. Outcomes include 1) validating the Broom Creek Formation as a regional target for CCS, 2) determining the full carbon life cycle of an industrial fuel production facility with CCS, 3) developing a field implementation plan (FIP) for small-scale CCS, and 4) determining the validity and pathway for using CCS to meet low-carbon fuel (LCF) standards. The technical team included the EERC, RTE, Trimeric Corporation, Schlumberger Carbon Services, and Computer Modelling Group (CMG). Findings from activities conducted November 2016 – May 2020 are summarized as follows. Several key steps have been accomplished toward validating the Broom Creek Formation as a CO2 injection and storage target at the RTE CCS site, including verification of the presence and structure of sandstone layers that may comprise the potential CO2 storage reservoir and the several thousand feet of overlying confining zone. Work included site characterization using existing data, interpretation of seismic data within the study area, and geologic modeling simulation of CO2 injection. Interpreted results estimate 3000 feet of confining zone between the Broom Creek Formation (storage target) and the lowermost underground source of drinking water (e.g., the Fox Hills Formation). The thickness of the Broom Creek injection target varies 230–420 ft within the survey area. Results were used to inform the location of a stratigraphic test well and associated characterization test program. No impediments were identified within the targeted CO2 storage complex that would prevent the project from moving forward. A stratigraphic test well is the next step to validate these results and to acquire remaining data necessary to develop a North Dakota CO2 SFP application. The EERC generated full carbon life cycle estimates for CCS integration with the RTE ethanol facility. Results indicated that an average 40% reduction in CO2 emissions is possible through CCS implementation. Approximately half of the carbon in the overall life cycle for a dry mill ethanol plant is generated through the fermentation process and emitted to the atmosphere; this is the CO2 stream targeted for CCS. The remaining carbon is attributed to corn feedstock farming (diesel, fertilizer), energy for fuel processing (natural gas, electricity), and transportation (diesel) of the fuel product. Life cycle carbon estimates are also affected by the anticipated energy consumption of a potential capture facility, which depend on the type of CO2 product generated. For example, a 30%–40% net CO2 emission reduction is estimated if a liquefied CO2 facility were incorporated compared to a 40%–50% net CO2 reduction if a supercritical “injection-grade” CO2 product is generated; i.e., more energy is required to further refine the CO2 stream, affecting the full carbon life cycle estimates. A CCS FIP was developed and initiated at the RTE CCS site, resulting in the development of several guidance documents: a CO2 Capture Process Design Package, a North Dakota CO2 geologic Storage Permits Template, and a Public Outreach Package for CCS in North Dakota. General FIP components include CO2 capture system, pipeline and well designs; monitoring, verification, and accounting (MVA) plans; geologic characterization and testing programs; and permitting and outreach plans. Vendor bids were also acquired for the CO2 liquefaction facility. Near-surface characterization (groundwater and soil gas sampling) and geologic characterization (seismic survey) were initiated to inform development of a UIC Class VI-compliant MVA plan compliant with a North Dakota CO2 SFP. Designs (well and geologic testing) were completed for a stratigraphic test well compliant with a North Dakota CO2 SFP. In addition, the outreach plan was executed, including community open houses, meetings with city/county/state officials, and development of public materials. Although other entities continued to mature incentive programs in 2019–2020, California and the Internal Revenue Service (IRS) currently provide the most advanced economic opportunities for CCS integrated with fuel production. The California Low-Carbon Fuel Standard (LCFS) adopted a CCS Protocol in January 2019, allowing submittal of a design-based pathway (DBP) application for an approved temporary (not certified) carbon intensity value for a fully engineered facility. An ethanol–CCS DBP application to the California LCFS Program (officially approved February 28, 2020) was developed to show that the RTE CCS effort meets LCFS requirements. The approved DBP provides confidence to advance the project and supports potential investments. Other entities continue to mature incentive programs. The IRS issued guidance in February 2020 that addresses the definition of beginning of construction and revenue procedure on partnerships for the Enhancement of Carbon Dioxide Sequestration Credit (a.k.a. Section 45Q) CCS tax credit program; the IRS anticipates issuing further guidance on issues such as secure geologic storage, utilization qualifications, and recapture of claimed credits. Maturing incentive programs coupled with workable permitting regulations provide confidence to advance CCS projects in North Dakota and support financial investment to proceed with designing, constructing, and implementing CCS projects at small-scale fuel production facilities. The largest hurdles for CCS implementation at small-scale industrial systems are often business/economic-related (i.e., not technical). Market uncertainty already exists for agriculture-based alternative fuels such as corn ethanol, for which production has increased by ~33%, and prices have correspondingly lowered since 2015. Passing the Section 45Q tax credit program improves economic feasibility for CCS but may require external investors for a small business to achieve maximum benefits. Public–private partnerships with NDIC and DOE have resulted in foundational technical and regulatory knowledge, growing stakeholder confidence, and a pathway to implementation that enables similar industrial CCS projects in the region to advance. This subtask was funded through the EERC–DOE Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by NDIC and RTE. The authors would also like to thank CMG, ESRI, IHS, Neuralog, and Schlumberger for allowing the use of their software packages in support of this work.

42 ENGINEERING↗

2022 Annual Technology Baseline (ATB) Cost and Performance Data for Transportation Technologies

The 2022 Transportation Annual Technology Baseline (ATB) provides detailed cost and performance data, estimates, and assumptions for vehicle and fuel technologies in the United States. It includes current and projected estimates: time-series through 2050 for light, medium, and heavy-duty vehicle technologies; scenarios for conventional and alternative fuels. It details the assumptions used to calculate those costs, such as natural gas and electricity prices, discount rates, and vehicle miles traveled. The 2022 Transportation ATB vehicle data are specifically for cars powered by gasoline, diesel, natural gas, gasoline hybrid, plug-in hybrid, battery electric, and fuel-cell powertrains and for trucks powered by diesel, diesel hybrid, plug-in hybrid, battery electric, and fuel cell powertrains. Fuels and blendstocks include gasoline, ethanol, blendstock for oxygenate blending, diesel, diesel from biomass, natural gas, electricity, hydrogen, aviation fuel, and marine fuel. At this time, the ATB does not include other vehicles such as buses, 2- and 3-wheeled motorized vehicles, or non-road vehicles such as aircraft, vessels, locomotives, and those for industry and agriculture. See "ATB Transportation Website" resource below for more project information.

2022↗

2024 Annual Technology Baseline (ATB) Cost and Performance Data for Transportation Technologies

The 2024 Transportation Annual Technology Baseline (ATB) provides detailed cost and performance data, estimates, and assumptions for vehicle and fuel technologies in the United States. It includes current and projected estimates: time-series through 2050 for light, medium, and heavy-duty vehicle technologies; scenarios for conventional and alternative fuels. It details the assumptions used to calculate those costs, such as natural gas and electricity prices, discount rates, and vehicle miles traveled. The 2024 Transportation ATB vehicle data are specifically for cars powered by gasoline, diesel, natural gas, gasoline hybrid, plug-in hybrid, battery electric, and fuel-cell powertrains and for trucks powered by diesel, diesel hybrid, plug-in hybrid, battery electric, and fuel cell powertrains. Fuels and blendstocks include gasoline, ethanol, blendstock for oxygenate blending, diesel, diesel from biomass, natural gas, electricity, hydrogen, aviation fuel, and marine fuel. At this time, the ATB does not include other vehicles such as 2- and 3-wheeled motorized vehicles, or non-road vehicles such as aircraft, vessels, locomotives, and those for industry and agriculture. See "Transportation ATB Website" resource below for more project information.

2024↗

AGT-102 automotive gas turbine

Development of a gas turbine powertrain with a 30% fuel economy improvement over a comparable S1 reciprocating engine, operation within 0.41 HC, 3.4 CO, and 0.40 NOx grams per mile emissions levels, and ability to use a variety of alternate fuels is summarized. The powertrain concept consists of a single-shaft engine with a ceramic inner shell for containment of hot gasses and support of twin regenerators. It uses a fixed-geometry, lean, premixed, prevaporized combustor, and a ceramic radial turbine rotor supported by an air-lubricated journal bearing. The engine is coupled to the vehicle through a widerange continuously variable transmission, which utilizes gearing and a variable-ratio metal compression belt. A response assist flywheel is used to achieve acceptable levels of engine response. The package offers a 100 lb weight advantage in a Chrysler K Car front-wheel-drive installation. Initial layout studies, preliminary transient thermal analysis, ceramic inner housing structural analysis, and detailed performance analysis were carried out for the basic engine.

Source record↗

Hydrothermal Liquefaction: Path to Sustainable Aviation Fuel

A variety of technologies are currently under development for producing sustainable aviation fuel (SAF), and one of the most promising technologies is the hydrothermal liquefaction (HTL) of low-cost waste feedstocks. Organizations across the globe are conducting research and development on HTL technology at scales varying from the laboratory to demonstrations focused on various aspects of technology development. The identification of more advanced and sustainable solutions to maximize the fuel yield while optimizing fuel properties and achieving cost parity with conventional fuels is the major focus in developing HTL technology. This workshop on the application of HTL to produce SAF, coordinated by the U.S. Department of Energy Bioenergy Technologies Office, Commercial Aviation Alternative Fuels Initiative, and Pacific Northwest National Laboratory (PNNL), was held virtually on November 17–19, 2020. A broad spectrum of experts from industry, academia, national laboratories, and government from across the globe participated in the workshop, contributing their ideas, insights, and perspectives. A series of keynote presentations, plenary presentations, and breakout sessions provided an interdisciplinary framework for sharing information and building collaboration. This document provides an overview of the content discussed in the presentations as well as the breakout session discussion. Diverse stakeholder perspectives were gathered, and this wealth of information collectively provides an update on the current state of the field and identifies the key research opportunities.

09 BIOMASS FUELS↗

JSC Case Study: Fleet Experience with E-85 Fuel

JSC has used E-85 as part of an overall strategy to comply with Presidential Executive Order 13423 and the Energy Policy Act. As a Federal fleet, we are required to reduce our petroleum consumption by 2 percent per year, and increase the use of alternative fuels in our vehicles. With the opening of our onsite dispenser in October 2004, JSC became the second federal fleet in Texas and the fifth NASA center to add E-85 fueling capability. JSC has a relatively small number of GSA Flex Fuel fleet vehicles at the present time (we don't include personal vehicles, or other contractor's non-GSA fleet), and there were no reasonably available retail E-85 fuel stations within a 15-minute drive or within five miles (one way). So we decided to install a small 1000 gallon onsite tank and dispenser. It was difficult to obtain a supplier due to our low monthly fuel consumption, and our fuel supplier contract has changed three times in less than five years. We experiences a couple of fuel contamination and quality control issues. JSC obtained good information on E-85 from the National Ethanol Vehicle Coalition (NEVC). We also spoke with Defense Energy Support Center, (DESC), Lawrence Berkeley Laboratory, and US Army Fort Leonard Wood. E-85 is a liquid fuel that is dispensed into our Flexible Fuel Vehicles identically to regular gasoline, so it was easy for our vehicle drivers to make the transition.

Hummel, Kirck↗

Multifuel evaluation of rich/quench/lean combustor

The fuel flexible combustor technology was developed for application to the Model 570-K industrial gas turbine engine. The technology, to achieve emission goals, emphasizes dry NOx reduction methods. Due to the high levels of fuel-bound nitrogen (FBN), control of NOx can be effected through a staged combustor with a rich initial combustion zone. A rich/quench/lean variable geometry combustor utilizes the technology presented to achieve low NOx from alternate fuels containing FBN. The results focus on emissions and durability for multifuel operation.

Notardonato, J. J.↗

GREET® Analysis for TERRA/ROOTS Success Scenarios

The Renewable Fuel Standard (RFS2), significantly amended under the U.S. Energy Independence and Security Act (EISA) of 2007, calls for production of 36 billion gallons of renewable fuels by 2022. To qualify as a renewable fuel under RFS2, fuels must achieve a reduction in greenhouse gas (GHG) emissions as compared to a 2005 petroleum baseline. The U.S. Environmental Protection Agency (USEPA) is responsible for evaluating if a certain biofuel pathway meets EISA reduction targets, based on lifecycle analysis (LCA). Typically, the tools/models for biofuel LCA describe the full bioenergy pathway including farm input manufacturing (e.g. fertilizers), feedstock production, conversion processing at the bio-refinery, and land use change (LUC) prompted by increased feedstock production and calculate the amount of GHGs emitted per unit of biofuel produced. This type of information has been a critical driver of public opinion and national policy. LCA technique has also been utilized by California Air Resources Board (CARB)’s Low-Carbon Fuel Standard (LCFS) to evaluate the lifecycle carbon intensity (CI) of biofuels. Through this program, California seeks to reduce the GHG emissions from transportation fuel and has committed to reduce the state’s transportation GHG emissions by 20% by 2030. This program operates through a system of tradable permits that are valued based on the difference in CI of alternative fuels and the fuel they displace (e.g. ethanol and gasoline). Lower CI fuels generate LCFS credits that increase in value as this difference gets larger. In 2018, CO 2 in the LCFS market was priced at $\$$160/metric ton.

09 BIOMASS FUELS↗

Improving the behavioral realism of global integrated assessment models: An application to consumers’ vehicle choices

A large body of transport sector-focused research recognizes the complexity of human behavior in relation to mobility. Yet, global integrated assessment models (IAMs), which are widely used to evaluate the costs, potentials, and consequences of different greenhouse gas emission trajectories over the medium-to-long term, typically represent behavior and the end use of energy as a simple rational choice between available alternatives, even though abundant empirical evidence shows that real-world decision making is more complex and less routinely rational. This paper demonstrates the value of incorporating certain features of consumer behavior in IAMs, focusing on light-duty vehicle (LDV) purchase decisions. An innovative model formulation is developed to represent heterogeneous consumer groups with varying preferences for vehicle novelty, range, refueling/recharging availability, and variety. The formulation is then implemented in the transport module of MESSAGE-Transport, a global IAM, although it also has the generic flexibility to be applied in energy-economy models with varying set-ups. Comparison of conventional and behaviorally-realistic model runs with respect to vehicle purchase decisions shows that consumer preferences may slow down the transition to alternative fuel (low-carbon) vehicles. Consequently, stronger price-based incentives and/or non-price based measures may be needed to transform the global fleet of passenger vehicles, at least in the initial market phases of novel alternatives. Otherwise, the mitigation burden borne by other transport sub-sectors and other energy sectors could be higher than previously estimated. Moreover, capturing behavioral features of energy consumers in global IAMs increases their usefulness to policy makers by allowing a more realistic assessment of a more diverse suite of policies.

33 ADVANCED PROPULSION SYSTEMS↗

Mixing and combustion enhancement in supersonic reacting flows

Research has been conducted for a number of years at the NASA Langley Research Center to develop a supersonic combustion ramjet (scramjet) capable of propelling a vehicle at hypersonic speeds in the atmosphere or beyond. Recently, that research has been directed toward the optimization of the scramjet combustor, and in particular the efficiency of fuel-air mixing and reaction in the engine. This paper describes a study of fuel-air mixing and reaction in a supersonic flow field, and discusses several techniques that were applied for enhancing the mixing processes and overal combustion efficiency in the flow. Based on the results of the study, an alternate fuel injector configuration was computationally designed, and that configuration significantly increased the amount of fuel-air mixing and combustion over a given combustor length that was achieved.

Drummond, J. Philip↗

Investigating the Combustion Performance of Dual Fuel Combustion with Diesel and Port Injected Hydrogen in a Large Bore Locomotive Engine

The heavy-duty transportation sector has primarily relied on conventional diesel combustion engines given their reliability and high thermal efficiency relative to spark ignition engines, but increased focus on reducing greenhouse gas emissions has led to investigation into alternative fuels. Gaseous hydrogen fuel has garnered a great deal of recent interest in the engine community given it has zero carbon, but hydrogen is not available at the scale and cost that petroleum fuels are currently available, and this is a barrier to adoption for industries that are looking to decarbonize their operations. Because of the fuel flexibility provided, dual fuel technology offers a pathway for some industries to adopt hydrogen as a fuel source while maintaining sufficient flexibility in times and locations where the new fuel is not yet available. This computational study investigates dual fuel combustion in a large bore locomotive engine architecture using direct injected diesel and port injected gaseous hydrogen fuel. With an optimal port fuel injection configuration from previous work, simulations of varying substitution ratio, compression ratio, manifold air temperature, diesel injection timing, and diesel injection pressure were performed to understand their effect on combustion performance. Results indicated that both increased substitution ratio and higher intake air temperature accelerates hydrogen flame propagation and can result in high peak cylinder pressures. Additionally, diesel injection timing and injection pressure were demonstrated as effective methods for controlling dual fuel combustion heat release rates.

ODonnell, Patrick Christopher↗

Development of 250 kW Ammonia and Hydrogen Industrial Burner Test Facility at the National Energy Technology Laboratory

In an effort to investigate the viability of ammonia and hydrogen as fuels in the industrial heating sector, the Department of Energy’s National Energy Technology Laboratory is developing a 250 kW burner test facility. The pursuit of a decarbonized industrial heating sector requires innovative approaches to convert existing assets to alternative fuels while maintaining adequate radiative heat transfer and limiting NOx. This new capability will leverage NETL’s experience and prior investments in ammonia and hydrogen combustion, to advance atmospheric pressure industrial combustion systems for industries such as cement kilns and glass factories. The intention in coming years is to collaborate with burner manufacturers and heavy industry partners to study, develop, and validate strategies for converting existing hardware from carbon-based fuels to next-generation clean ammonia and hydrogen technologies.

May, Kristyn Johnson↗

Hydrogen-Enhanced Natural Gas Vehicle Program

The project objective is to demonstrate the viability of HCNG fuel (30 to 50% hydrogen by volume and the remainder natural gas) to reduce emissions from light-duty on-road vehicles with no loss in performance or efficiency. The City of Las Vegas has an interest in alternative fuels and already has an existing hydrogen refueling station. Collier Technologies Inc (CT) supplied the latest design retrofit kits capable of converting nine compressed natural gas (CNG) fueled, light-duty vehicles powered by the Ford 5.4L Triton engine. CT installed the kits on the first two vehicles in Las Vegas, trained personnel at the City of Las Vegas (the City) to perform the additional seven retrofits, and developed materials for allowing other entities to perform these retrofits as well. These vehicles were used in normal service by the City while driver impressions, reliability, fuel efficiency and emissions were documented for a minimum of one year after conversion. This project has shown the efficacy of operating vehicles originally designed to operate on compressed natural gas with HCNG fuel incorporating large quantities of exhaust gas recirculation (EGR). There were no safety issues experienced with these vehicles. The only maintenance issue in the project was some rough idling due to problems with the EGR valve and piping parts. Once the rough idling was corrected no further maintenance issues with these vehicles were experienced. Fuel economy data showed no significant changes after conversion even with the added power provided by the superchargers that were part of the conversions. Driver feedback for the conversions was very favorable. The additional power provided by the HCNG vehicles was greatly appreciated, especially in traffic. The drivability of the HCNG vehicles was considered to be superior by the drivers. Most of the converted vehicles showed zero oxides of nitrogen throughout the life of the project using the State of Nevada emissions station.

08 HYDROGEN↗

Results of studies on advanced winged space transportation systems

Various winged spaceplane concepts which appear viable as the post-Shuttle generation of launch vehicles are reviewed. The designs all yield improvements in size and mass compared to the STS, provided certain emerging technologies are successfully applied. Single-stage-to-orbit (SSTO) vehicles would burn LOX/LH fuels in SSME-derived engines with two position nozzles. SSTO could be realized in either vertical or horizontal take-off configurations, but all would have 29,500 kg payload capacities and horizontal landing capabilities. Consideration is given to alternative fuels, the effects of adding air-breathing engines, various ways of attaching and deploying payloads, containing the fuels and providing thermal protection during reentry. It is found that similar technology advances are needed for all the concepts.

Arrington, J. P.↗