Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Adiabatic Temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Connection between mesopause temperature, circulation and noctilucent clouds

To investigate the connection between mesopause temperature in summer and the induced circulation upon possible formation of the observed polar mesospheric (noctilucent) cloud layer (PMC), a two-dimensional semiempirical model is used to calculate the zonally averaged diabatic circulation. On the basis of the calculations, one may draw the following conclusions: (1) if the large departures from radiative equilibrium which occur at the summer mesopause at high latitudes should be balanced by adiabatic processes of the mean circulation alone, a vigorous circulation is needed (there is some evidence that such a vigorous circulation has been observed); (2) the vertical velocities of some cm/s at the polar summertime mesopause will support the formation of polar mesospheric clouds, because those large wind speeds support larger ice particles against gravitational sedimentation; and (3) a region of mild subsidence in the summertime midlatitude mesosphere due to the effect of nonlinear temperature advection would tend to limit the occurrence of ice particles to latitudes poleward of about 55 deg.

Gartner, V.↗
DOE OSTI2022

Adiabatic and isothermal configurations for Re 4 Si 7 transverse thermoelectric power generators

We report that transverse thermoelectric generators (TTEGs) have the potential to overcome two challenging problems that limit the commercial application of classical thermoelectric generators (TEGs): the significant irreversible efficiency losses in the contacts and the thermal degradation of the contacts at the hot end. TTEGs are built from a single material that can generate a thermoelectric current in a direction that is orthogonal to a temperature gradient. They only require a single set of contacts that are displaced away from the hot end. Here, we experimentally explore the device design considerations for optimizing the performance of this far less explored class of thermal-to-electric generation devices. We fabricate Re 4 Si 7 TTEGs and show that there is no measurable loss in efficiency with a single set of contacts that are midway between the hot and cold ends. We show that a new effect must be considered: the appearance of transverse thermal gradients that lead to significant differences between the performance of TTEGs implemented in isothermal and adiabatic geometries. The isothermal TTEG configuration leads to much higher device efficiencies. Overall, this work highlights how different the design of TTEGs is from that of conventional TEGs and the importance of controlling the device geometry for optimum waste heat recovery.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Early structure formation constraints on the ultralight axion in the postinflation scenario

Many works have concentrated on the observable signatures of the dark matter being an ultralight axion-like particle (ALP). We concentrate on a particularly dramatic signature in the late-time cosmological matter power spectrum that occurs if the symmetry breaking that establishes the ALP happens after inflation -- white-noise density fluctuations that dominate at small scales over the adiabatic fluctuations from inflation. Here, these fluctuations alter the early history of nonlinear structure formation. We find that for symmetry breaking scales of f A ~ 10 13 – 10 15 GeV, which requires a high effective maximum temperature after inflation, ALP dark matter with particle mass of m A ~ 10 –13 – 10 –20 eV could significantly change the number of high-redshift dwarf galaxies, the reionization history, and the Lyα forest. We consider all three observables. We find that the Lyα forest is the most constraining of current observables, excluding f A ≳ 10 15 GeV (m A ≲ 10 –17 eV) in the simplest model for the ALP and considerably lower values in models coupled to a hidden strongly interacting sector (f A ≳ 10 13 GeV and m A ≲ 10 –13 eV). Observations that constrain the extremely high-redshift tail of reionization may disfavor similar levels of isocurvature fluctuations as the forest. Future z ~ 20–30 21cm observations have the potential to improve these constraints further using that the supersonic motions of the isocurvature-enhanced abundance of ~10 4 M ⊙ halos would shock heat the baryons, sourcing large BAO features.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Bohm Criterion of Plasma Sheaths away from Asymptotic Limits

The plasma exit flow speed at the sheath entrance is constrained by the Bohm criterion. The so-called Bohm speed regulates the plasma particle and power exhaust fluxes to the wall, and it is commonly deployed as a boundary condition to exclude the sheath region in quasineutral plasma modeling. In this work, the Bohm criterion analysis is performed in the intermediate plasma regime away from the previously known limiting cases of adiabatic laws and the asymptotic limit of infinitesimal Debye length in a finite-size system, using the transport equations of an anisotropic plasma. The resulting Bohm speed has explicit dependence on local plasma heat flux, temperature isotropization, and thermal force. Comparison with kinetic simulations demonstrates its accuracy over the plasma-sheath transition region in which quasineutrality is weakly perturbed and the Bohm criterion applies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

Adiabatic and nonadiabatic processes in thermal models of solar hard X-ray bursts

The temporal evolution of thermal-bremsstrahlung-emitting material at the top of a solar coronal loop under various processes is examined as a model of solar hard X-ray bursts. The behavior of emission measure and temperature with time is analyzed for the hot plasma confined in a segment at the top of a loop, taking into account the effects or the time variation of the confining toroidal magnetic field, the longitudinal expansion of the source through the motion of a pair of collisionless conduction fronts and unspecified heating or cooling processes. Analytic expressions for the behavior of the toroidal magnetic field and the heating rate necessary to reproduce a given behavior of emission measure and temperature with time are obtained in terms of the initial magnetic field strength and density of the heated region and a characteristic longitudinal expansion time. Results are applied to observations of two impulsive solar hard X-ray bursts, and it is shown that the contribution of heating is negligible after the first few seconds of the events, although significant nonadiabatic heating occurs early in the events.

Emslie, A. G.↗
DOE OSTI2020

Symmetric Rydberg controlled- Z gates with adiabatic pulses

We analyze neutral atom Rydberg C Z gates based on adiabatic pulses applied symmetrically to both atoms. Analysis with smooth pulse shapes and Cs atom parameters predicts the gates can create Bell states with fidelity F > 0.999 using adiabatic rapid passage (ARP) pulses. With globally optimized adiabatic pulse shapes, in a two-photon excitation process, we generate Bell states with fidelity F = 0.997. The analysis fully accounts for spontaneous emission from intermediate and Rydberg states, including the Rydberg lifetime in a room temperature environment, but does not include errors arising from laser noise. In conclusion, the gate protocols do not require individual addressing and are shown to be robust against Doppler shifts due to atomic motion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1976

Multiple-pulse spin locking in dipolar solids

We report our preliminary results on a multiple-pulse spin-locking effect in dipolar solids. This effect has significant experimental advantages over prior techniques because of its high duty cycle for data collection. We show that the spin temperature assumption can be applied to explain the rather long-term behavior of the spin system. We also demonstrate how this method can be applied to obtain magnetization curves almost instantly for T1 rho decay and adiabatic demagnetization.

Rhim, W.-K.↗
NASA NTRS1987

Small engine technology programs

Small engine technology programs being conducted at the NASA Lewis Research Center are described. Small gas turbine research is aimed at general aviation, commutercraft, rotorcraft, and cruise missile applications. The Rotary Engine Program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. There is a strong element of synergism between the various programs in several respects. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The Heavy Duty Diesel Transport (HDTT), rotary technology, and the compound cycle programs are all examining approached to minimum heat rejection, or adiabatic systems employing advanced materials. The Automotive Gas Turbine (AGT) program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbines will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects.

Niedzwiecki, Richard W.↗
NASA NTRS1991

Vertical eddy heat fluxes from model simulations

Vertical eddy fluxes of heat are calculated from simulations with a variety of climate models, ranging from three-dimensional GCMs to a one-dimensional radiative-convective model. The models' total eddy flux in the lower troposphere is found to agree well with Hantel's analysis from observations, but in the mid and upper troposphere the models' values are systematically 30 percent to 50 percent smaller than Hantel's. The models nevertheless give very good results for the global temperature profile, and the reason for the discrepancy is unclear. The model results show that the manner in which the vertical eddy flux is carried is very sensitive to the parameterization of moist convection. When a moist adiabatic adjustment scheme with a critical value for the relative humidity of 100 percent is used, the vertical transports by large-scale eddies and small-scale convection on a global basis are equal: but when a penetrative convection scheme is used, the large-scale flux on a global basis is only about one-fifth to one-fourth the small-scale flux. Comparison of the model results with observations indicates that the results with the latter scheme are more realistic. However, even in this case, in mid and high latitudes the large and small-scale vertical eddy fluxes of heat are comparable in magnitude above the planetary boundary layer.

Stone, Peter H.↗
NASA NTRS2024

Stratospheric Temperature and Ozone Impacts of the Hunga Tonga-Hunga Ha'apai Water Vapor Injection

The January 2022 eruption of the Hunga Tonga-Hunga Ha'apai underwater volcano injected a large amount of water vapor into the mid-stratosphere. This study uses model simulations to investigate the resulting stratospheric impacts out to 2031. Maximum radiatively-driven model temperature changes occur in the Southern Hemisphere (SH) subtropics in April–May 2022, with warming of ∼1 K in the lower stratosphere and cooling of 3 K in the mid-stratosphere. The radiative cooling combined with adiabatic cooling driven by the quasi-biennial oscillation meridional circulation explains the near-record cold anomaly observed in the SH subtropical mid-stratosphere. Projected ozone responses maximize in 2023–2024 as the water vapor plume is transported globally throughout the stratosphere and mesosphere. The excess H2O increases the OH radical, causing a negative global ozone response (2%–10%) in the upper stratosphere and mesosphere due to increased odd hydrogen-ozone loss, and a small positive ozone response (0.5%–1%) in the mid-stratosphere due to interference of the NOx catalytic loss cycle by the additional OH. In the lower stratosphere, the excess H2O is projected to increase polar stratospheric clouds and springtime halogen-ozone loss, enhancing the Antarctic ozone hole by 25–30 DU in 2023. Arctic impact is small, with maximum additional ozone loss of 4–5 DU projected in spring 2024. These responses diminish after 2024 to be quite small by 2031, as the excess H2O is removed from the stratosphere with a 2.5-year e-folding time. Given the year-to-year variability of the stratosphere, the magnitudes of these ozone responses may be below the threshold of detectability in observations.

stratosphere↗
DOE OSTI2023

Low-loss adiabatic fiber-optic coupler for cryogenic photonics

Recent developments in quantum light–matter coupled systems and quantum transducers have highlighted the need for cryogenic optical measurements. In this study, we present a packaged fiber-optic coupler with a coupling efficiency of over 50% for telecom wavelength light down to the mK temperature range. Besides the high coupling efficiency, our method enables sensitive photonic device measurements that are immune to mechanical vibrations present in cryogenic setups.

Optics↗
DOE OSTI2020

Visualization of R410A Flow Boiling Inside Horizontal Smooth Tubes under Diabatic Conditions

This article presents a novel approach to visualize the flow boiling in round tubes under “diabatic conditions”. In the visualization test section, a 3D printed round tube is placed inside a glass tube with secondary fluid at a higher temperature flowing in the annulus between the two tubes thus providing diabatic conditions. Experimental work was conducted for evaporating R410A flow in a horizontal smooth round tube with the inner diameter of 6.3 mm. Compared to the traditional adiabatic visualization technique, the more realistic evaporative condition is simulated and the developing evaporation process is captured. New insights for the flow behavior at low vapor quality are brought by this diabatic method. The vapor plug occurs at very low vapor quality, and this is attributed to the coalescence of bubbles generated on the heated tube wall. For the intermittent flow, liquid slug triggered by Kelvin–Helmholtz instability affects the nucleation on the tube wall. It brings the fresh liquid to rewet the dry surface and activate the nucleation sites. Finally, heat flux condition affects the heat transfer mechanisms during the flow boiling, and the heat transfer through the nucleate boiling mechanism increases as the heat flux increases.

3D printed↗
NASA NTRS1975

The structure and evolution of Jupiter - The fluid contraction stage

The complete evolution of a contracting star of Jovian mass consisting of a convective adiabatic homogeneous fluid is determined using stellar structure methods, improved model atmosphere calculations, and substantially improved thermodynamic properties for hydrogen and hydrogen-helium fluids. The model atmospheres are calculated in the form of time-averaged vertical temperature structures, including all relevant sources of opacity and a solar energy deposition component, and the thermodynamic properties are modified to obtain better agreement with Monte Carlo results for metallic fluids. The resultant gravitationally contracting evolutionary models are found to have two phases: an early stellar phase similar to a typical low-mass pre-main-sequence body and a later phase constituting an approach to a degenerate-dwarf cooling curve. The first phase is shown to have high luminosities and internal temperatures, while the second gives excellent agreement with the observed radius and luminosity of Jupiter. Analysis indicates that the equation of state and superadiabaticity have the strongest influence on evolution over planetary time scales.

Graboske, H. C., Jr.↗
NASA NTRS1979

Imaging X-ray observations and the temperature structure of the Cygnus Loop

Imaging X-ray observations of the northeast portion of the Cygnus Loop (NGC 6992) reveal that X-ray emission extends 5 arc min beyond the optical filaments. Comparison with Fe XIV 5303 forbidden line measurements across the emitting shell is consistent with a temperature gradient across the shell from 10 to the 6.1 K (outside) to 10 to the 6.3 K (inside). Both X-ray and Fe XIV forbidden line intensity and spatial structure can be explained by a Sedov adiabatic blast wave with a shock velocity of 290 plus or minus 15 km/s.

Tuohy, I. R.↗
NASA NTRS1987

On the generation of magnetosheath lion roars

A theoretical model is proposed to discuss the electron dynamics associated with the mirror waves and their effects on the generation of the observed lion roars in the magnetosheath. It is pointed out that the usual double-adiabatic theory of hydromagnetics is not applicable to the electrons in mirror waves. Although the electron magnetic moment is conserved, the energy of each electron in the mirror waves is expected to be constant. Assuming an initial electron temperature anisotropy, it can be shown that in the low field region the electron temperature and thermal anisotropy are higher than the initial values, whereas in the high field region the electron temperature and anisotropy are lower. This point can lead to a theoretical explanation of the important features of the observed lion roars. Then present discussion complements the existing theories in the literature.

Lee, L. C.↗
NASA NTRS1989

A skin friction law for compressible turbulent flow

An algebraic skin friction law is derived for adiabatic, compressible, equilibrium, turbulent boundary layer flow. An outer solution in terms of the Clauser defect stream function is matched to an inner empirical expression composed of compressible laws of the wall and wake. The modified Crocco temperature-velocity relationship and the Clauser eddy viscousity model are used in the outer solution. The skin friction law pertains for all pressure gradients in the incompressible through supersonic range and for small pressure gradients in the hypersonic range. Excellent comparisons with experiment are obtained in the appropriate parameter ranges. The application to numerical computation is discussed.

Barnwell, Richard W.↗
NASA NTRS1989

The effect of electron temperature and impact ionization on Martian return AOTV flowfields

Various electron impact ionization models in conjunction with a quasi-equilibrium electron temperature model have been investigated and applied to the stagnation region of a hypothetical 2.3 m nose radius Martian return AOTV. For the conditions considered, U = 12 km/sec at 80 km, both multi-temperature inviscid and viscous results indicate that a two-step ionization impact model predicts ionization distances in agreement with experimental data, that nonequilibrium chemistry and radiation effects are important throughout the stagnation zone, and that the quasi-equilibrium electron temperature model is reasonable. Also, using a non-grey emission-absorption radiation step model, it is shown that nonequilibrium causes a reduction in radiative heating from that predicted for equilibrium conditions and that compared to an adiabatic wall a cool wall (1650 deg K) results in a 28 to 45 percent reduction in radiative heating due to absorption near the wall.

Carlson, Leland A.↗
NASA NTRS1989

Development of free-piston Stirling engine performance and optimization codes based on Martini simulation technique

A FORTRAN computer code is described that could be used to design and optimize a free-displacer, free-piston Stirling engine similar to the RE-1000 engine made by Sunpower. The code contains options for specifying displacer and power piston motion or for allowing these motions to be calculated by a force balance. The engine load may be a dashpot, inertial compressor, hydraulic pump or linear alternator. Cycle analysis may be done by isothermal analysis or adiabatic analysis. Adiabatic analysis may be done using the Martini moving gas node analysis or the Rios second-order Runge-Kutta analysis. Flow loss and heat loss equations are included. Graphical display of engine motions and pressures and temperatures are included. Programming for optimizing up to 15 independent dimensions is included. Sample performance results are shown for both specified and unconstrained piston motions; these results are shown as generated by each of the two Martini analyses. Two sample optimization searches are shown using specified piston motion isothermal analysis. One is for three adjustable input and one is for four. Also, two optimization searches for calculated piston motion are presented for three and for four adjustable inputs. The effect of leakage is evaluated. Suggestions for further work are given.

Martini, William R.↗