Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstracts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

(abstract) Steady State Temperature Profile in a Cylinder Heated by Microwaves

We have developed a new theory to calculate the steady state temperature profile in a cylindrical sample positioned along the entire axis of a cylindrical microwave cavity. Temperature profiles were computed for alumina rods of various radii excited by one of the TM0n0 modes with n = 1, 2, or 3. Sample surface and center temperatures will be presented as a function of total sample absorbed power or electric field strength at the sample surface. An approach for attaining more uniform heating within the sample by reducing the magnitude of the inverted temperature profile using a concentric outer cylindrical tube will be discussed.

microwave↗
NASA NTRS1995

(abstract) Recent Developments in Active Microwave Systems at JPL

This paper provides an overview of some of the recent developments in active microwave systems at JPL. The first section summarizes the engineering and scientific results that were obtained from the two recent flights of the Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SIR-C/X-SAR) on the Shuttle Endeavor. Specific examples of the applications of these data to various scientific disciplines will be discussed. The second section of the paper describes the recent progress in the development of an interferometric SAR system for high-resolution digital topography mapping. Examples of measurements from this technique over areas with earthquakes will be shown. The final section of the paper addresses development of meteorological radars for rain and cloud measurements. The design of an airborne rain mapping radar that was developed to support the Tropical Rain Measuring Mission is summarized. The technical design challenges for this high-frequency radar system will be described.

radar↗
NASA NTRS1995

(abstract) SIR-C/X-SAR: A Multifaceted Radar

The Spaceborne Imaging Radar-C/X-band Synthetic Aperture Radar (SAR-C/X-SAR) was a joint US/German/Italian project, with flights aboard the shuttle Endeavor in April and October 1994. SIR-C/X-SAR is the first spaceborne multifrequency, multipolarization radar. The SIR-C and the X-SAR were designed to operate in conjunction with each other, collecting data over common sites. Scientists around the world are using the data in conjunction with ground measurements to conduct experiments relating to Earth's ecology, geology, hydrology, and oceanography. In addition, the data are the most comprehensive set yet available for engineering characterization of spaceborne SAR capabilities relative to various radar phenomenology and methodology. Preliminary results show changes between missions in vegetation, ice, snow, flooding, and volcano activity.

imaging↗
NASA NTRS1995

(abstract) The 1994 Laboratory Calibration Of TIMS

This summary describes the spatial, spectral, and radiometric calibration of TIMS performed at the JPL Thermal Infrared Calibration Facility (TIRCAL) between May and August 1994. The 1994 calibration of TIMS was the first to make use of the new EXABYTE (8mm helical-scan tape) recording system. With the new recorder, the TIMS data tapes may be read directly on any computer system that has an EXABYTE tape drive. We analyzed the calibration data sets using image processing procedures written in IDL (Research Systems, Inc., Boulder, CO 80303).

TIMS↗
NASA NTRS1994

(abstract) Pluto Integrated Camera-Spectrometer (PICS): a Low Mass, Low Power Instrument for Planetary Exploration

The concept we describe is an integrated instrument (a Pluto Integrated Camera-Spectrometer -- PICS) that will perform the functions of all three optical instruments required by the Pluto Fast Flyby Mission: the near-IR spectrometer, the camera, and the UV spectrometer. This integrated approach minimizes mass and power use. It also forced us early in the conceptual design to consider integrated observational sequences and integrated power management, thus ensuring compatible duty cycles (i.e., exposure times, readout rates) to meet the composite requirements for data collection, compression, and storage. Based on flight mission experience we believe that this integrated approach will result in substantial cost savings, both in reworking instrument designs during accommodation, as well as in sequence planning and integration. Finally, this integrated payload automatically yields a cohesive mission data set, optimized for correlative analysis. The presentation will provide details of the PICS instrument design and describe the fabrication and testing of the integrated SiC structure and optics at SSG Inc. Final integration and test plans for the prototype will also be described.

Pluto↗
NASA NTRS1993

(abstract) FASTER -- A Tool for DSN Forecasting and Scheduling

FASTER, the Forecasting And Scheduling Tool for Earth-based Resources is a suite of software tools developed at JPL to aid in the process of allocating DSN 70 and 34 meter antennas and equipment to support deep space satellites and ground based astronomy. FASTER has been designed for use by a diverse user community, including mid-level managers, data entry and analysis teams, and project scheduling personnel. The system helps to automate many of the previously labor intensive tasks and ensure proper analysis and consistency throughout all phases of the allocation process. FASTER implements an interactive environment for both forecasting and scheduling. This paper will discuss technical aspects of the FASTER system, including forecasting and scheduling algorithms, issues related to large scale use of a scheduling and forecasting system, implications to the process in which a forecasting and scheduling system is embedded, and lessons learned and implications to similar systems.

forecasting↗
NASA NTRS1993

(abstract) Geology of the Venera and Vega Landing Sites

Geologic mapping of the seven Venera/Vega landing sites (radius of error = 150 km) using Magellan data has shown that the dominant type of terrain at these sites is plains. At the Venera 8 and 13 sites, where a nontholeiitic composition was measured for the surface material, the Magellan imagery shows that both these sites have unusual volcanic features associated with them, such as steep sided domes and coronalike features. At the other five sites, where no peculiar volcanic activity occurred within the landing circle, the landers measured geochemical signatures of tholeiitic basalts. This association between unusual volcanic activity and nontholeiitic composition suggests that the geochemistry measured by the landers correlates well with the morphology seen in the Magellan imagery. A strong correlation also exists between the SAR imagery and the TV panoramas taken by the Venera 9, 10, 13, and 14 landers. Based on Magellan data and the lander geochemical and TV panoramas, we have been able to suggest the most likely material in the Magellan imagery sampled by the landers.

Venera↗
NASA NTRS1993

(abstract) Electron Excitation of the H 2 (...) Continuum in the Vacuum Ultraviolet

Planetary exploration has pointed out the need for accurate electron impact excitation cross sections for H 2 . The quantum yield in the threshold energy region between vacuum ultraviolet (VUV) emission production by the band systems of the singlet and triplet states and dissociative production of fast H(1s) atoms by the triplet states is essential for energy budget modeling in planetary atmospheres and astronomy.

electron↗
NASA NTRS1993

(abstract) The Impactor Flux in the Pluto-Charon System

The impactor flux on Pluto and Charon consists of long-period comets from the Oort cloud passing through the region, and intermediate-period comets evolving inward to (or outward from) short-period orbits. The source of the intermediate-period comets is likely an extended disk of remnant planetesimals beyond the orbit of Neptune, commonly referred to as the Kuiper belt, though the Oort cloud may be an additional source of some short-period comets. The Pluto-Charon system actually circulates within the Kuiper belt, and with an aphelion of 49.3 AU, moves through a region where remnant planetesimal orbits would likely be stable over the age of the solar system. The recent discovery of two objects at Kuiper belt distances, 1992 QB 1 and 1993 FW, and the fact that the orbit determined for 1992 QB 1 is likely of low eccentricity and low inclination, have provided strong observational evidence for the Kuiper belt. Weisman et al (1989) showed that, for the expected number of objects in the Kuiper belt necessary to provide the short-period comet flux, cometary cratering on Pluto and Charon is dominated by Kuiper belt comets. We will provide updated estimates of the numbers, based on an improved understanding of Oort cloud and Kuiper belt dynamics since 1989, and on improved estimates for the radii and masses for Pluto and Charon. Because Pluto and Charon actually penetrate the stable region of the Kuiper belt beyond 40 AU, expected cratering rates for the pair are substantially higher than for Triton, which is located at the inner edge of the Kuiper belt. However, the Pluto-Charon system is tidally evolved and this may have led to resurfacing events at various times in its history. Thus, detailed predictions of the integrated crater density or comparisons with Triton are not very meaningful without a knowledge of that history. Differences in the suspected compositions of Pluto and Charon may also lead to different surface rheologies and thus, different retention times for cratered surfaces.

Pluto↗
NASA NTRS1993

(abstract) Overview of NASA's Adaptive Structures Program

NASA's research program in Adaptive Structures was initiated seven years ago to provide the technology required for large (20-50 meters in dimension) precision (submicron) structures for observations from space. The current approach of designing thermally stable passive structures cannot meet the requirements and moreover the systems cannot be validated by ground tests. Adaptive Structures provides the capability to adjust the quasistatic dimensions of the structures, preload joints, add active damping, and provide the actuation forces necessary to attenuate the undesired dynamic motions. The technology is applicable to space platforms with various pointing instruments as well as for microspacecraft. This technology has been incorporated as part of a small Active Fold Mirror on the Wide Field Planetary Camera to be flown within the year to correct the optical errors in the Hubble Telescope. Highlights of NASA's Adaptive Structures research and applications will be presented along with future technology and research requirements for both small inexpensive spacecraft and large precision systems.

adaptive↗
NASA NTRS1994

(abstract) Measurement of Aerodynamic Roughness Using Radar Backscatter over Vegetated Surfaces

Gathering of local information from remote platforms is often a more cost-effective way of obtaining the required data type than are local measurements. A good example is the collection of wind regime data in order to infer the amount and type of aeolian transport at a given site. This paper describes a potential mechanism for remotely inferring the wind regime from synthetic aperture radar data and describes a project to estimate the practicality of using such a mechanism. Both radar backscatter and wind flow are functions of the roughness of the site under study. It is therefore reasonable to suspect that a fairly well-behaved relationship might exist between normalized radar backscatter coefficient and aerodynamic roughness length. Aeolian transport of small particles depends in turn on wind flow and is an important quantity to measure for several economic-related reasons, but the direct measurement of wind flow regime generally involves construction of wind towers and many days of data collection, making such data extremely expensive and prohibitive in areas that cannot be easily accessed. For both desert and vegetated sites where extensive wind profile data already exist, a NASA airborne multifrequency, multipolarization radar was used to acquire radar data at several incidence angles. At the vegetated sites, vegetation height varied from tens of centimeters to several meters, and surface roughness was a few centimeters.

radar↗
NASA NTRS1993

(abstract) Multispecies Gas Flows in the Interior of Comets

A theoretical comet nucleus model has been written which employs 3 volatiles: CO, CO 2 , and H 2 O. It allows variations for equations of state: the Clausius/Clapeyron equation as well as other equations based on the latest thermodynamic data: the Brown/Ziegler relationship for CO 2 and CO at low pressure and the Lowe expression for water vapor at low pressure. It allows for variations in the physics of the outflow, from an essentially throttling mechanism (pure sublimation to space), to the Knudsen regime, to the Dusty-Gas Dynamic model. Variations in several parameters are explored. Results are compared with data from actual comets. None of the variations in parameter space produce a result that compares well with the comet data. All models yield a total gas production between 10&sup27; and 10&sup28; per second (low). This suggests that secondary mechanisms peripheral to this modeling effort, such as the opening and closing of cracks, a conductivity expression which depends upon porosity as well as temperature, etc., may play a more important role in the cometary efflux process than previously thought.

comets↗
NASA NTRS1994

(abstract) Optimal Low Thrust Trajectories Using Differential Inclusion Concepts

Low thrust propulsion systems typically have their greatest benefit for high energy missions or missions with large post-launch maneuver requirements. Missions which have been examined include main belt asteroid rendezvous, comet rendezvous, outer planet and Mercury orbiters, Pluto flyby, and solar probe missions. Low thrust mission design software used to determine these trajectories is based on two distinct formulations of the optimal control problem: the indirect and direct methods. The traditional approach (indirect) is to use the calculus of variations to obtain first order necessary conditions on the states and costates. In contrast, direct methods are conceptually different in that no explicit integration takes place. A direct method based on differential inclusion concepts has been developed and successfully used to compute low thrust trajectories. This new approach removes explicit control dependence from the problem thereby reducing the dimension of the parameter space for the nonlinear programming problem. Also when compared to other direct methods, fewer nonlinear constraints are required to represent the dynamics of the problem.

low↗
NASA NTRS1994

(abstract) Design and Testing of a Fullerene RF Ion Engine

Because of the large mass, low ionization potential and large electron impact ionization cross section, use of buckminsterfullerene (C 60 ) as a propellant might result in significant increases in ion engine efficiency over that obtained with xenon at low specific impulse. Consequently, an experimantal program to investigate the feasibility of using fullerenes as a propellant was initiated. To eliminate the possibility of hot cathode surfaces causing fragmentation, fabrication of a radio-frequency discharge chamber was pursued. Experimental results using the radio-frequency source will be presented.

fullerenes↗
NASA NTRS1994

(abstract) Navigating through the Venus Atmosphere

This paper presents the problems and challenges of the Magellan Navigation Team. The challenges are: 1) to predict the periapsis time to an accuracy of less than 100 seconds, 2) to accurately predict the dynamic pressure incurred by the spacecraft, 3) to model and to generate this prediction in a timely manner, 4) to provide navigation support 7 days per week for 70 days with 3 navigators and one graphic specialist to generate a daily package for presentation and display. The problems encountered by the Navigation Team in order to meet the above challenges are: 1) the uncertainty in the Venus atmosphere model, 2) the uncertainty in the Venus gravity model, 3) the uncertainty in predicting the attitude control thruster firing, 4) the sparse amount of radiometric tracking data, 5) the radiometric data editing is complicated by the effects of the Venus atmosphere fluctuations.

Venus↗
NASA NTRS1994

(abstract) Vibration Method for Tracking the Resonant Mode and Impedance of a Microwave Cavity

We have developed a vibration technique to continuously maintain mode resonance and impedance match between a constant frequency magnetron source and resonant cavity. This method uses a vibrating metal rod to modulate the volume of the cavity that is equivalent to modulating an adjustable plunger. A similar vibrating metal rod attached to a stub tuner modulates the waveguide volume between the source and cavity. A phase sensitive detection scheme determines the optimum position of the adjustable plunger and stub tuner. The improved power transfer during the heating of a 99.8% pure alumina rod was demonstrated using this new technique. Temperature-time and reflected power-time plotswill be presented for the cases of no tracking, impedance tracker only, mode tracker only, and simultaneous impedance and mode tracking. Internal melting of the alumina rod near 2000°C with both trackers on will also be discussed.

microwave↗
NASA NTRS1995

(abstract) The 1994 TIMS Airborne Calibration Experiment: Castaic Lake, California

This summary describes the 9 March 1994 TIMS airborne calibration experiment conducted at Castaic Lake, California. TIMS was flown on the NASA/ARC C-130 with the new retractable air fence installed in the TIMS instrument bay. The purpose of this experiment was to determine is the fence would reduce the air turbulence in the TIMS instrument bay, thereby reducing the errors in calibration caused by wind-blast cooling of the blackbody reference sources internal to TIMS. Previous experiments have indicated that the wind blast effect could cause TIMS to over-estimate surface temperatures by more than 10°C. A suite of twelve flight was designed to subject the TIMS/air fence system to different wind conditions and air temperatures. The TIMS flights were supported by a ground-truth team, who measured lake surface temperatures from a boat, and a atmosphere characterization team, who launched an airsonde and measured solar irradiance with a Reagan Sun Photometer.

TIMS↗
NASA NTRS2021

AIAA Ascend 2021 Conference On Demand Manufacturing of Electronics Panel Abstract

1. Session Proposal o Session Title NASA’s In Space Manufacturing and the On Demand Manufacturing of Electronics o Session Topic Primary -- Space Logistics, Autonomy, and Robotics; Secondary – Transformative Research and Technologies o Session Format: Panel Discussion. o Requested Session Duration: 60 minutes o Short Session Description: The goal of NASA’s On Demand Manufacturing of Electronics project is to develop and demonstrate the feasibility of a low-gravity, on-demand manufacturing system for flexible hybrid electronic devices on the International Space Station. This panel will feature several key collaborators and team members from the commercial sector, academia, and internal to NASA, each of which are contributing an unique and vital role to the design and implementation of this new technology system. o Extended Session Description (Please describe in detail the activity proposed, including how you intend to use the requested session duration. This session description will be provided to the reviewers for consideration and will not be displayed in the online agenda.): The session will be moderated by Curtis Hill, the Project Lead for the On Demand Manufacturing of Electronics (ODME), and he will start by giving a brief introduction to the ODME project which is working to produce a demo system for the manufacturing of electronic devices on the International Space Station. Panelists consisting of collaborators and team members to the ODME project will then give a brief (~5 min) introduction highlighting their contributions to the project, followed by time for Q&A from the audience. The panel will consist of: 1. Kenneth Church, nScrypt. nScrypt is a leader in multi-material printing with a modular system that incorporates a direct write thick film print head, a polymer fused filament fabrication print head, a laser sintering attachment, a drill head attachment for milling, and a pick and place. The system can print a layer and scan for accuracy of prints. The combination of multiple print heads and scanning allows for the on-demand production of intricate electronic components. 2. Andy Kurk, TechShot, Inc. Techshot, Inc. has collaborated extensively with NASA on the in space manufacturing of both printed electronics and fused metal materials. They are currently working to develop and integrate a test system for printed electronics, and a flight demonstration on the International Space Station is anticipated in 2024. 3. Ed Hendricks, NextFlex. NextFlex has the goal of advancing the manufacture of flexible hybrid electronics in the U.S. They are working with ODME on the development of AstroSense, an additively manufactured, wireless, flexible, and wearable health sensor. 4. Dr. Pradeep Lall, Auburn University. Professor Lall is the MacFarlane Endowed Distinguished Professor in the Department of Mechanical Engineering with a Courtesy Joint Appointment in the Department of Electrical and Computer Engineering and a Courtesy Joint Appointment in the Department of Finance. He is collaborating with NASA’s ODME project to develop multilayer printable devices and to develop techniques to test the quality of a printed electronic device. 5. Dr. Wei Gao, California Institute of Technology. Professor Gao is an Assistant Professor of Medical Engineering. His group is developing fully printed, flexible, and wearable biosensors for crew health monitoring in collaboration with NASA’s ODME project. In addition, they are working on using sweat to power biofuel cells for wearable, self-powered electronic devices. 6. Beth Paquette, NASA Goddard. The ODME branch at NASA Goddard is spearheading a sounding rocket flight demo to prove the capability of a printed electronic device with multiple sensors. In addition, they focus on thin film and flexible energy storage evaluations. o Session Goal(s)/Outcome(s): Please list the learning objectives and/or tangible outcomes (technical paper or other publication). The goal of this session is to highlight the internal and collaborative efforts of NASA’s On Demand Manufacturing of Electronics project to develop a system for printing electronics that will be tested on the International Space Station in 2024. In addition, the session with facilitate discussion with the community on the state of the art of printable electronics, current challenges, and new avenues for collaboration.

Jennifer McInnis Jones↗