SEARCH · Engineering Papers

Results for “zero carbon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Exhaust emissions survey of a turbofan engine for flame holder swirl type augmentors at simulated altitude flight conditions

Emissions of carbon dioxide, total oxides of nitrogen, unburned hydrocarbons, and carbon monoxide from an F100 afterburning two spool turbofan engine at simulated flight conditions are reported. Tests were run at Mach 0.8 at altitudes of 10.97 and 13.71 km (36,000 and 45,000 ft), and at Mach 1.2 at 13.71 km (45,000 ft). Emission measurements were made from intermediate power (nonafterburning) through maximum afterburning, using a single point gas sample probe traversed across the horizontal diameter of the exhaust nozzle. The data show that emissions vary with flight speed, altitude, power level, and radial position across the nozzle. Carbon monoxide emissions were low for intermediate and partial afterburning power. Unburned hydrocarbons were near zero for most of the simulated flight conditions. At maximum afterburning, there were regions of NOx deficiency in regions of high CO. The results suggest that the low NOx levels observed in the tests are a result of interaction with high CO in the thermal converter. CO2 emissions were proportional to local fuel air ratio for all test conditions.

Moss, J. E., Jr.↗

NASA NTRS1993

A photovoltaic catenary-tent array for the Martian surface

To provide electrical power during an exploration mission to Mars, a deployable tent-shaped structure with a flexible photovoltaic (PV) blanket is proposed. The array is designed with a self-deploying mechanism utilizing pressurized gas expansion. The structural design for the array uses a combination of cables, beams, and columns to support and deploy the PV blanket. Under the force of gravity a cable carrying a uniform load will take the shape of a catenary curve. A catenary-tent collector is self shadowing which must be taken into account in the solar radiation calculation. The shape and the area of the shadow on the array was calculated and used in the determination of the global radiation on the array. The PV blanket shape and structure dimension were optimized to achieve a configuration which maximizes the specific power (W/kg). The optimization was performed for four types of PV blankets (Si, GaAs/Ge, GaAs CLEFT, and amorphous Si) and four types of structure materials (Carbon composite, Aramid Fiber composite, Aluminum, and Magnesium). The results show that the catenary shape of the PV blanket, which produces the highest specific power, corresponds to zero end angle at the base with respect to the horizontal. The tent angle is determined by the combined effect of the array structure specific mass and the PV blanket output power. The combination of carbon composite structural material and GaAs CLEFT solar cells produce the highest specific power. The study was carried out for two sites on Mars corresponding to the Viking Lander locations. The designs were also compared for summer, winter, and yearly operation.

Crutchik, M.↗

NASA NTRS2024

Additional Aviation Sustainability Strategies

Emissions from the aviation sector are expected to grow significantly in the next few decades due to growing demand for aviation. The U.S. fleet size has increased significantly in the past 20 years, growing from 2,132 aircraft to 5,485 aircraft. Similarly from 1990 to 2019, aviation emissions more than doubled, growing faster than any other transportation mode. These emissions include carbon dioxide (CO2), as well as non-CO2 sources including nitrogen oxides (NOx), sulfur dioxide (SO2), water (H2O), and particulate matter (soot). However, this report focuses specifically on CO2 emissions because the impacts from CO2 are well-understood and long-lived. There are also many climate goals tied to CO2 emissions, including the US Aviation Climate Action Plan which is pushing for net-zero in 2050. CO2 is a greenhouse, or heat-trapping, gas that comes from the extraction and burning of fossil fuels, from wildfires, and natural processes like volcanoes. Greenhouse gases absorb heat radiating from the Earth’s surface and release it in all directions, including back toward Earth’s surface. By adding more CO2 to the atmosphere, humans amplify the natural greenhouse effect, causing global temperature to rise. Since the onset of industrial times in 1750, human activities have raised atmospheric CO2 by 50%. Considering this challenge, the United States has set a climate goal to achieve net-zero CO2 emissions in the U.S. aviation sector by 2050 to reduce the environmental impact of aviation. Net-zero emissions refers to the amount of greenhouse gases (GHGs), such as CO2, methane or SO2, that are removed from the atmosphere being equal to those emitted by human activity. This contrasts with carbon-neutrality, which refers to no net release of carbon dioxide to the atmosphere, especially through offsetting emissions, that could be accomplished through a series of actions. As of 2022, the goal of net-zero has been adopted by much of the aviation industry including multiple airlines and countries. To reach net-zero by 2050, sustainable aviation fuels (SAFs) are identified as the technology that could provide the greatest impact within this timeframe. However, certain challenges may limit the production and/or adoption of SAFs in the marketplace, such as competition for feedstocks, production capacity, and high cost. In this case, SAFs would be insufficient to meet the net-zero CO2 emission goals. Therefore, in addition to SAFs, other strategies will be needed to close the gap on emissions produced as a result of SAF shortfalls or to enhance the impact of SAFs on reducing emissions. NASA’s Aeronautics Research Mission Directorate (ARMD) aims to examine these additional pathways to explore how its research may best contribute to the realization of net-zero emissions by 2050. Specifically, this effort considers strategies that can reduce emissions in the aviation sector in combination with the use of SAFs and carbon offsets while still meeting projected passenger demand. The strategies considered are not only feasible but also could be operationally scalable by 2050. The goal of this report is to investigate additional strategies such as alternative flight and ground operations, providing insight into the CO2 emission reduction potential and feasibility of strategy implementation by 2050.

Carbon Emissions↗

NASA NTRS1991

Measurement of tropospheric carbon monoxide using gas filter radiometers

The measurement of tropospheric carbon monoxide with gas filter radiometers is examined on the basis of the MAPS experiment. The performance characteristics of an instrument that uses the MAPS detectors, broadband filters, and gas cells in a system similar to the GASCOFIL system described by Morrow and Nicholls (1985) is determined. The signal function for two carbon monoxide channels of the MAPS instrument as it was flown in 1981 is shown. The measurements of the lower pressure channel are weighted to a higher altitude. The signal function, when integrated over altitude and multiplied by the normalization constant, yields the value of the signal. Both signal functions approach zero at the top because the gas concentration approaches zero. The present data reduction technique assumes that there are no clouds in the field of view. If clouds are present, the inferred carbon monoxide mixing ratio is too high, and those points must be rejected from the data set.

Reichle, Henry G., Jr.↗

NASA NTRS1984

Heat-transfer distributions for biconics at incidence in hypersonic-hypervelocity real-gas flows

Laminar heat-transfer distributions were measured on spherically blunted, 13/7 deg straight and bent biconics at freestream velocities from 4.5 to 6.9 km/s and Mach numbers from 6 to 9. The flows were generated in the NASA's Langley Expansion Tube using helium, nitrogen, air, and carbon dioxide; angle of attack, referenced to the axis of the aft cone, was varied from zero to 20 deg. The penalty in windward heating to the fore cone due to the 7-deg nose bend diminished rapidly with increasing angle of attack and was only 10 to 20 percent at the design trim angle of attack of 20 deg. Leeward heating initially decreased, then increased, with increasing angle of attack. Windward heating rates predicted with a computer code that solves the parabolized Navier-Stokes equations were in good agreement with measurements for helium and air. The study used a 1.9-percent scale model of the proposed generic planetary vehicle and is directly applicable to the orbital transfer vehicle, which incorporates a spherically blunted biconic.

Miller, C. G.↗

NASA NTRS2010

A Mesoscale Analysis of Column-Integrated Aerosol Properties in Northern India During the TIGERZ 2008 Pre-Monsoon Period and a Comparison to MODIS Retrievals

The Indo-Gangetic Plain (IGP) of the northern Indian subcontinent produces anthropogenic pollution from urban, industrial and rural combustion sources nearly continuously and is affected by convection-induced winds driving desert and alluvial dust into the atmosphere during the premonsoon period. Within the IGP, the NASA Aerosol Robotic Network (AERONET) project initiated the TIGERZ measurement campaign in May 2008 with an intensive operational period from May 1 to June 23, 2008. Mesoscale spatial variability of aerosol optical depth (AOD, tau) measurements at 500mn was assessed at sites around Kanpur, India, with averages ranging from 0.31 to 0.89 for spatial variability study (SVS) deployments. Sites located downwind from the city of Kanpur indicated slightly higher average aerosol optical depth (delta Tau(sub 500)=0.03-0.09). In addition, SVS AOD area-averages were compared to the long-tenn Kanpur AERONET site data: Four SVS area-averages were within +/- 1 cr of the climatological mean of the Kanpur site, while one SVS was within 2sigma below climatology. For a SVS case using AERONET inversions, the 440-870mn Angstrom exponent of approximately 0.38, the 440-870mn absorption Angstrom exponent (AAE) of 1.15-1.53, and the sphericity parameter near zero suggested the occurrence of large, strongly absorbing, non-spherical aerosols over Kanpur (e.g., mixed black carbon and dust) as well as stronger absorption downwind of Kanpur. Furthermore, the 3km and lOkm Terra and Aqua MODIS C005 aerosol retrieval algorithms at tau(sub 550) were compared to the TIGERZ data set. Although MODIS retrievals at higher quality levels were comparable to the MODIS retrieval uncertainty, the total number of MODIS matchups (N) were reduced with subsequent quality levels (N=25, QA>=0; N=9,QA>=l; N=6, QA>=2; N=1, QA=3) over Kanpur during the premonsoon primarily due to the semi-bright surface, complex aerosol mixture and cloud-contaminated pixels. The TIGERZ 2008 data set provided a unique opportunity to measure the spatial and temporal variations of aerosol loading in the IGP. The strong aerosol absorption derived from ground-based sun/sky radiometer measurements suggested the presence of a predominately black carbon and dust mixture during the pre-monsoon period. Consistent with the elevated heat-pump hypothesis, these absorbing aerosols found across Kanpur and the greater IGP region during the pre-monsoon period likely induced regional atmospheric warming, which lead to a more rapid advance of the southwest Asian monsoon and above normal precipitation over northern India in June 2008.

Giles, D. M.↗

NASA NTRS1985

Magnetoacoustic stress measurements in steel

Uniaxial stress effects on the low-field magnetoacoustic interaction have been studied using bulk compressional waves and Rayleigh surface waves in numerous steel samples having various impurity concentrations (Namkung et al., 1984). The results invariably showed that the initial slope of acoustic natural velocity variations, with respect to net induced magnetization parallel to the stress axis, is positive under tension and negative under compression. The results of current measurements in railroad rail steel having about 0.68 wt percent carbon content are typical for medium range carbon steels. The low-field natural velocity slope in this particular type of steel, which is almost zero when unstressed, becomes steeper with increased magnitude of stress in both directions. Hence, the nondestructive determination of the sign of residual stress in railroad wheels and rails is possible using this technique. This paper discusses the basic physical mechanism underlying the experimental observations and presents the results obtained in railroad rail steel.

Namkung, M.↗

NASA NTRS1992

Evolution of a phase separated gravity independent bioreactor

The evolution of a phase-separated gravity-independent bioreactor is described. The initial prototype, a zero head-space manifold silicone membrane based reactor, maintained large diffusional resistances. Obtaining oxygen transfer rates needed to support carbon-recycling aerobic microbes is impossible if large resistances are maintained. Next generation designs (Mark I and II) mimic heat exchanger design to promote turbulence at the tubing-liquid interface, thereby reducing liquid and gas side diffusional resistances. While oxygen transfer rates increased by a factor of ten, liquid channeling prevented further increases. To overcome these problems, a Mark III reactor was developed which maintains inverted phases, i.e., media flows inside the silicone tubing, oxygen gas is applied external to the tubing. This enhances design through changes in gas side driving force concentration and liquid side turbulence levels. Combining an applied external pressure of 4 atm with increased Reynolds numbers resulted in oxygen transfer intensities of 232 mmol O2/l per hr (1000 times greater than the first prototype and comparable to a conventional fermenter). A 1.0 liter Mark III reactor can potentially deliver oxygen supplies necessary to support cell cultures needed to recycle a 10-astronaut carbon load continuously.

Villeneuve, Peter E.↗

NASA NTRS2004

Spatial Distributions of Metal Atoms During Carbon SWNTs Formation: Measurements and Modelling

Experiments and modelling have been undertaken to clarify the role of metal catalysts during single-wall carbon nanotube formation. For instance, we wonder whether the metal catalyst is active as an atom, a cluster, a liquid or solid nanoparticle [1]. A reactor has been developed for synthesis by continuous CO2-laser vaporisation of a carbon-nickel-cobalt target in laminar helium flow. The laser induced fluorescence technique [2] is applied for local probing of gaseous Ni, Co and CZ species throughout the hot carbon flow of the target heated up to 3500 K. A rapid depletion of C2 in contrast to the spatial extent of metal atoms is observed in the plume (Fig. 1). This asserts that C2 condenses earlier than Ni and Co atoms.[3, 4]. The depletion is even faster when catalysts are present. It may indicate that an interaction between metal atoms and carbon dimers takes place in the gas as soon as they are expelled from the target surface. Two methods of modelling are used: a spatially I-D calculation developed originally for the arc process [5], and a zero-D time dependent calculation, solving the chemical kinetics along the streamlines [6]. The latter includes Ni cluster formation. The peak of C2 density is calculated close to the target surface where the temperature is the highest. In the hot region, C; is dominant. As the carbon products move away from the target and mix with the ambient helium, they recombine into larger clusters, as demonstrated by the peak of C5 density around 1 mm. The profile of Ni-atom density compares fairly well with the measured one (Fig. 2). The early increase is due to the drop of temperature, and the final decrease beyond 6 mm results from Ni cluster formation at the eutectic temperature (approx.1600 K).

Cau, M.↗

NASA NTRS1972

Photodissociation of CO2 to produce CO /a super 3 pi/.

Carbon dioxide in a helium buffer at room temperature was irradiated with a photon beam. The wavelengths used in the investigation were in the range from 850 to 1090 A. Phosphorescence from CO Cameron bands was observed. The phosphorescent yield is zero at threshold and increases smoothly to a maximum of about 60% near 900 A. The smoothness of the percentage yield was an unexpected observation and is explained by postulating that the relevant potential surface crossings are outside the Franck-Condon region of carbon dioxide absorption.

Lawrence, G. M.↗

NASA NTRS1974

Main sequence models for massive zero-metal stars

Zero-age main-sequence models for stars of 20, 10, 5, and 2 solar masses with no heavy elements are constructed for three different possible primordial helium abundances: Y=0.00, Y=0.23, and Y=0.30. The latter two values of Y bracket the range of primordial helium abundances cited by Wagoner. With the exceptions of the two 20 solar mass models that contain helium, these models are found to be self-consistent in the sense that the formation of carbon through the triple-alpha process during premain sequence contraction is not sufficient to bring the CN cycle into competition with the proton-proton chain on the ZAMS. The zero-metal models of the present study have higher surface and central temperatures, higher central densities, smaller radii, and smaller convective cores than do the population I models with the same masses.

Cary, N.↗

NASA NTRS2011

Catalytic Generation of Lift Gases for Balloons

A lift-gas cracker (LGC) is an apparatus that generates a low-molecular-weight gas (mostly hydrogen with smaller amounts of carbon monoxide and/or carbon dioxide) at low gauge pressure by methanol reforming. LGCs are undergoing development for use as sources of buoyant gases for filling zero-gauge-pressure meteorological and scientific balloons in remote locations where heavy, high-pressure helium cylinders are not readily available. LGCs could also be used aboard large, zero-gauge-pressure, stratospheric research balloons to extend the duration of flight.

Zubrin, Robert↗

NASA NTRSDate not supplied

A Cold Wet Mars: A Testable Hypothesis for Ancient Mars Ocean Freezing Point Depression Via Low Molecular Weight Organics

Mars exhibits widespread evidence of surface water in the distant past, but global modeling has had difficulty producing climatological conditions conducive to a wet surface. The hypothesis discussed here examines a different way of approaching the problem rather than focusing on climate, instead an examination of the nature of the surface liquid itself. Previous work has largely assumed that martian surface water was a brine analogous to terrestrial ocean water, but recent discoveries suggest that significant amounts of light organic compounds may have been present via abiogenic native production of light organics on Mars [1]. Light organics such as methanol and formaldehyde have an approximate order-of-magnitude greater freezing point depression than brine, potentially lowering the freezing point of martian surface fluids sufficiently to remain liquid even if the mean surface temperature is below zero Centigrade. As Mars evolved and the surface transitioned to the strongly oxidized conditions seen today, the light organics would have oxidized to carbon dioxide and may be a constituent of the atmosphere today. Considerable work must be done to constrain the freezing points of Mars-relevant organic/water and organic/salt/water mixtures, but this investigation might explain the presence of surface fluid on a cold early Mars – a cold, wet Mars as opposed to a warm, wet Mars. Additionally, this approach may work in conjunction with climatological modeling to better describe early conditions conducive which adequately explain observations. This hypothesis can be tested by examination of ancient fluid inclusions (either in situ or via Mars Sample Return) such as those commonly found in halite, preserving samples of ancient martian surface fluid.

M D Fries↗

NASA NTRS1983

Spectrophone stabilization and offset tuning of a carbon dioxide waveguide laser

A sensitive spectrophone containing CO2 gas is incorporated into a feedback loop to stabilize the frequency of a CO2 waveguide laser. First or second harmonic detection combined with a zero offset feature and the relatively high operating pressure of the laser allows continuous tuning of the stabilized frequency over a 400 MHz range. Frequency stability of better than + or - 1 MHz is achieved.

Kavaya, M. J.↗

NASA NTRS2002

In-FEEP ion beam neutralization with thermionic and field emission cathodes

Charge neutralization of an In-FEEP thruster was demonstrated with three different electron sources by zeroing the floating potential of the thruster and neutralizer system. The three cathodes used in the investigation include a mixed metal thermionic cathode, a carbon nanotube field emission cathode, and a Spindt-type Mo field emission array cathode.

field emission cathodes FEEP electric propulsion↗

NASA NTRS2010

Feasibility Study of a Lunar Analog Bed Rest Model

The purpose of this study was to determine the feasibility of using a 9.5deg head-up tilt bed rest model to simulate the effects of the 1/6 g load to the human body that exists on the lunar surface. The lunar analog bed rest model utilized a modified hospital bed. The modifications included mounting the mattress on a sled that rolled on bearings to provide freedom of movement. The weight of the sled was off-loaded using a counterweight system to insure that 1/6 body weight was applied along the long axis (z-axis) of the body. Force was verified through use of a force plate mounted at the foot of the bed. A seating assembly was added to the bed to permit periods of sitting. Subjects alternated between standing and sitting positions throughout the day. A total of 35% of the day was spent in the standing position and 65% was spent sitting. In an effort to achieve physiologic fluid shifts expected for a 1/6 G environment, subjects wore compression stockings and performed unloaded foot and ankle exercises. Eight subjects (3 females and 5 males) participated in this study. Subjects spent 13 days in the pre-bed rest phase, 6 days in bed rest and 3 days post bed rest. Subjects consumed a standardized diet throughout the study. To determine feasibility, measures of subject comfort, force and plasma volume were collected. Subject comfort was assessed using a Likert scale. Subjects were asked to assess level of comfort (0-100) for 11 body regions and provide an overall rating. Results indicated minimal to no discomfort as most subjects reported scores of zero. Force measures were performed for each standing position and were validated against subject s calculated 1/6 body weight (r(sup 2) = 0.993). The carbon monoxide rebreathing technique was used to assess plasma volume during pre-bed rest and on the last day of bed rest. Plasma volume results indicated a significant decrease (p = 0.001) from pre to post bed rest values. Subjects lost on average 8.3% (sd = 6.1%) during the bed rest phase. Findings from this feasibility study indicated that 1) the lunar analog bed rest model was well tolerated by subjects; 2) a 1/6 load was accurately applied to the z-axis of the body; and 3) plasma volume losses could be achieved in a head-up tilt bed rest model. Future work to refine this model should include extending the duration of bed rest to mimic longer mission durations and a comprehensive assessment of the physiological responses to this bed rest analog.

Cromwell, Ronita L.↗

NASA NTRS1989

Model system studies with a phase separated membrane bioreactor

The operation and evaluation of a bioreactor designed for high intensity oxygen transfer in a microgravity environment is described. The reactor itself consists of a zero headspace liquid phase separated from the air supply by a long length of silicone rubber tubing through which the oxygen diffuses in and the carbon dioxide diffuses out. Mass transfer studies show that the oxygen is film diffusion controlled both externally and internally to the tubing and not by diffusion across the tube walls. Methods of upgrading the design to eliminate these resistances are proposed. Cell growth was obtained in the fermenter using Saccharomyces cerevisiae showing that this concept is capable of sustaining cell growth in the terrestial simulation.

Petersen, G. R.↗

NASA NTRS1989

Phase separated membrane bioreactor - Results from model system studies

Petersen, G. R.↗