Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind energy development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Scientific challenges to characterizing the wind resource in the marine atmospheric boundary layer

Abstract. With the increasing level of offshore wind energy investment, it is correspondingly important to be able to accurately characterize the wind resource in terms of energy potential as well as operating conditions affecting wind plant performance, maintenance, and lifespan. Accurate resource assessment at a particular site supports investment decisions. Following construction, accurate wind forecasts are needed to support efficient power markets and integration of wind power with the electrical grid. To optimize the design of wind turbines, it is necessary to accurately describe the environmental characteristics, such as precipitation and waves, that erode turbine surfaces and generate structural loads as a complicated response to the combined impact of shear, atmospheric turbulence, and wave stresses. Despite recent considerable progress both in improvements to numerical weather prediction models and in coupling these models to turbulent flows within wind plants, major challenges remain, especially in the offshore environment. Accurately simulating the interactions among winds, waves, wakes, and their structural interactions with offshore wind turbines requires accounting for spatial (and associated temporal) scales from O(1 m) to O(100 km). Computing capabilities for the foreseeable future will not be able to resolve all of these scales simultaneously, necessitating continuing improvement in subgrid-scale parameterizations within highly nonlinear models. In addition, observations to constrain and validate these models, especially in the rotor-swept area of turbines over the ocean, remains largely absent. Thus, gaining sufficient understanding of the physics of atmospheric flow within and around wind plants remains one of the grand challenges of wind energy, particularly in the offshore environment. This paper provides a review of prominent scientific challenges to characterizing the offshore wind resource using as examples phenomena that occur in the rapidly developing wind energy areas off the United States. Such phenomena include horizontal temperature gradients that lead to strong vertical stratification; consequent features such as low-level jets and internal boundary layers; highly nonstationary conditions, which occur with both extratropical storms (e.g., nor'easters) and tropical storms; air–sea interaction, including deformation of conventional wind profiles by the wave boundary layer; and precipitation with its contributions to leading-edge erosion of wind turbine blades. The paper also describes the current state of modeling and observations in the marine atmospheric boundary layer and provides specific recommendations for filling key current knowledge gaps.

17 WIND ENERGY↗
DOE OSTI2023

Lessons learned in coupling atmospheric models across scales for onshore and offshore wind energy

Abstract. The Mesoscale to Microscale Coupling team, part of the U.S. Department of Energy Atmosphere to Electrons (A2e) initiative, has studied various important challenges related to coupling mesoscale models to microscale models for the use case of wind energy development and operation. Several coupling methods and techniques for generating turbulence at the microscale that is subgrid to the mesoscale have been evaluated for a variety of cases. Case studies included flat-terrain, complex-terrain, and offshore environments. Methods were developed to bridge the terra incognita, which scales from about 100 m through the depth of the boundary layer. The team used wind-relevant metrics and archived code, case information, and assessment tools and is making those widely available. Lessons learned and discerned best practices are described in the context of the cases studied for the purpose of enabling further deployment of wind energy.

17 WIND ENERGY↗
DOE OSTI2020

WRF Modelling of Deep Convection and Hail for Wind Power Applications

Deep convection and the related occurrence of hail, intense precipitation and wind gusts represent a hazard to a range of energy infrastructure including wind turbine blades. Wind turbine blade leading edge erosion (LEE) is caused by the impact of falling hydrometeors onto rotating wind turbine blades. It is a major source of wind turbine maintenance costs and energy losses from wind farms. In the United States Southern Great Plains (SGP), where there is widespread wind energy development, deep convection and hail events are common, increasing the potential for precipitation-driven LEE. A 25-day Weather Research and Forecasting (WRF) model simulation conducted at convection-permitting resolution and using a detailed microphysics scheme is carried out for the SGP to evaluate the effectiveness in modelling the wind and precipitation conditions relevant to LEE potential. WRF output for these properties is evaluated using radar observations of precipitation (including hail) and reflectivity, in situ wind speed measurements and wind power generation. This research demonstrates some skill for the primary drivers of LEE. Wind speeds, rainfall rates and precipitation totals show good agreement with observations. Here, the occurrence of precipitation during power producing wind speeds is also shown to exhibit fidelity. Hail events frequently occur during periods when wind turbines are rotating and are especially important to LEE in the SGP. The presence of hail is modelled with a mean proportion correct of 0.77 and an odds ratio 4.55. Further research is needed to demonstrate sufficient model performance to be actionable for the wind energy industry and there is evidence for positive model bias in cloud reflectivity.

17 WIND ENERGY↗
DOE OSTI2023

Modelos de riesgo de colision: una herramienta para evaluar los riesgos para las aves rapaces en instalaciones de energia eolica (Spanish)

In January 2022, the International Energy Agency Wind Task 34 - Working Together to Resolve the Environmental Effects of Wind Energy (WREN) - organized a forum to discuss aspects of raptor collision risk with wind turbines. The forum included experts in raptor biology and physiology, collision risk modeling, wind energy development, and atmospheric scientists from seven countries. They represented a range of international stakeholder groups including academia, government agencies, national laboratories, and wildlife consultants. This educational brief summarizes the discussion during the forum and written comments from those who could not attend. Relevant literature was used to provide additional context when needed. For several species of raptors, such as golden eagles (Aquila chrysaetos), griffon vultures (Gyps fulvus) and white-tailed eagles (Haliaatus albicilla), collision risk with wind turbines continues to be a concern among stakeholders. These concerns include the potential population-level impact related to collisions, compliance with regulatory mechanisms for protected species, and the ability to generate renewable energy. To make siting and operational decisions, stakeholders require some level of certainty of the risk associated with a proposed project. Understanding this risk, in part, requires species-specific data on raptors and how they perceive and interact with wind farms or individual wind turbines. Collision risk models (CRMs) are a tool, often used in environmental impact assessments, that can provide estimates of risk relative to specific turbines or an entire wind farm. However, questions associated with the uncertainty in CRM estimates remain. This is the Spanish translation of NREL/FS-5000-84747, "Collision Risk Modeling - A Tool for Assessing Risks to Raptors at Wind Energy Facilities."

collision risk↗
DOE OSTI2022

Mechanisms of Low-Level Jet Formation in the U.S. Mid-Atlantic Offshore

Low level jets (LLJs) in the atmosphere exhibit a local windspeed maximum inthe boundary layer and are commonly observed both over land and in coastal environments. Because LLJs present strong positive shear beneath the maximum (or "jet nose") and negative shear above the nose, they pose a challenge to future offshore wind technology through their impacts on turbine performance and wakes. Summertime LLJs in the Great Plains have been attributed to frictional decoupling triggering an inertial oscillation, whilecoastal LLJs in California or the North Sea have additional driving mechanisms such as baroclinic forcing. By comparison, LLJs in the coastal US Mid-Atlantic have received less attention, with conflicting evidence about the mechanism that triggers these high shear events. Motivated by future wind energy development in the region, this work elucidates the atmospheric mechanisms of LLJ formation in the US Mid-Atlantic. Using observational data from two floating LiDAR buoys deployed bythe New York State Energy Research and Development Authority in the NY Bight, we identify four sustained LLJ events whose windspeeds and directions are well predicted by a WRF simulation (Weather Research and Forecasting Model). From analysis of the WRF data, we find that the four case studies provide evidence of concurrent inertial oscillation, reduced vertical mixing, and baroclinicity. In addition, we use simple atmospheric dynamics and a single-column-model to compare the relative contribution of each of these mechanisms to triggering the LLJ. By improving understanding and predictability of coastal mid-Atlantic LLJs, this work reduces uncertaintiesof wind energy deployment in the region, aiding the US's transition toward renewable energy.

atmospheric boundary layers↗
DOE OSTI2024

Raptor Monitoring and Minimization Technologies

In June 2023, the International Energy Agency Wind Task 34 - Working Together to Resolve the Environmental Effects of Wind Energy (WREN) - organized a forum to discuss monitoring and minimization strategies used to study raptor interactions with wind energy facilities. The forum included experts in raptor movement and behavior, minimization measures, technology validation, and wind energy development from four countries. The experts represented a range of international stakeholder groups including private industry, financial institutions, government agencies, nonprofit organizations, and wildlife consultants. This educational brief summarizes the discussion during the forum and written comments from additional participants who could not attend the live event. Relevant literature was used to provide additional context when needed.

minimization↗
DOE OSTI2024

Tierra del Fuego Case Study Capacity Expansion Analysis

This case study, developed by Net Zero World Initiative and the Government of Argentina, examines least-cost decarbonization pathways for Tierra del Fuego, Argentina, utilizing renewable energy, energy storage, hydrogen, and other decarbonization technologies. Being the second largest natural gas producing province in Argentina, Tierra del Fuego has historically relied on natural gas for their energy sector needs. As they look at possible decarbonization pathways, they face challenges due to extreme weather conditions, isolation from the mainland, and low population density. The study utilizes the Engage web application for capacity expansion modeling, addressing both business-as-usual (BAU) and accelerated decarbonization scenarios, with varying degrees of electrification and carbon emission constraints. Key findings reveal that an interconnection with the mainland, high contribution of wind energy development on Tierra del Fuego, energy storage, and hydrogen, coupled with energy-efficient electrification technologies (such as heat pumps and electric vehicles), emerge as the most cost-effective solutions to decarbonize, significantly reducing carbon emissions and total system energy costs. The study explores self-generation and interconnection alternatives, demonstrating the economic advantage of an interconnection of Tierra del Fuego with the mainland, as an alternative to 100% local generation. Sensitivity analyses on wind data sources and temporal resolutions, as well as projected natural gas prices, highlight the influence of external factors on the feasibility of decarbonization pathways. Challenges identified include the practicality of phasing out natural gas, economic uncertainty, cost implications of long-term storage technologies as wind energy increases, and geographical limitations for wind generation. The case study concludes that while substantial emissions reductions can be achieved by 2050, and be competitive with conventional pathways, achieving a full 100% decarbonization by 2050 would entail higher costs, particularly due to the significant reliance on storage solutions with higher contribution of wind energy. The analysis offers valuable insights for policymakers and stakeholders in Argentina's energy sector, emphasizing the importance of strategic planning, investment in renewable energy and storage technologies, and careful consideration of local conditions in the transition towards Net Zero targets.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Impacts of Siting Considerations on Offshore Wind Technical Potential in the United States

We estimated the technical potential for the offshore wind (OSW) resource in the United States under two siting regimes to characterize the uncertainty pertaining to the local drivers of siting within a national context. We established Open Access and Limited Access regimes to represent upper and lower bounds on OSW deployment, respectively. These included spatial constraints such as technology depth limits, military use areas, protected areas, existing infrastructure, shipping lanes and more. The same spatial considerations are also considered in the Limited Access regime, but with additional buffers to existing infrastructure as well as a reduced capacity density assumption. Capacity density is the concentration of wind energy development for a given area specified in terms of megawatts (MW) per square kilometer (km 2 ). In the Open-Access regime we used a 5 MW/km 2 assumption, while in the Limited Access scenario we assumed 3 MW/km 2 . This difference reflects our intention for the Open-Access scenario to serve as an upper bound for OSW technical potential, with the Limited-Access scenario as a lower bound. We also applied three technology advancement scenarios to each of the siting regimes. The three technology scenarios (Conservative, Moderate, and Advanced) represent plausible improvements in turbine technology including increased rated power and higher hub heights.

17 WIND ENERGY↗
DOE OSTI2022

Assessment of Offshore Wind Leasing Areas in California [Slides]

This presentation summarizes an analysis of options for dividing Morro Bay and Humboldt Wind Energy Areas (WEAs) into offshore wind lease areas. The delineation process considered input from wind energy developers, physical characteristics of the sites, and potential effects of turbine layout and mooring technology selection on the energy generation capacity of each location. Two delineation options were assessed for the Humboldt WEA and four options for the Morro Bay WEA. The lease areas within each WEA were designed to have equal value and support approximately 1 gigawatt of generation capacity.

17 WIND ENERGY↗
DOE OSTI2024

Distributional Equity in the Employment and Wage Impacts of Energy Transitions

We use restricted-access, geocoded data on the near-universe of workers in 23 US states to quantify the impact of wind energy development on local earnings and employment, by race, ethnicity, sex, and educational attainment. We find significant impacts that persist for several years beyond the project construction phase. Our estimates are larger than those from previous studies but still small relative to typical economic multipliers for fiscal spending or investment in other industries. We find the largest percentage increases for black workers and workers who either do not have a high school diploma or who have a college degree. We also find the economic gains for men to be much larger than those for women. Finally, we find estimates from data aggregated to the county level to be significantly lower than our worker-level estimates. We suggest a number of areas for further study building off the justice implications of our findings.

employment↗
DOE OSTI2025

Distributed Acoustic Sensing for Whale Vocalization Monitoring: A Vertical Deployment Field Test

Abstract There is growing interest in floating offshore wind turbine (FOWT) technology, where turbines are installed on floating structures anchored to the seabed, allowing wind energy development in areas unsuitable for traditional fixed-platform turbines. Responsible development requires monitoring the impact of FOWTs on marine wildlife, such as whales, throughout the operational lifecycle of the turbines. Distributed acoustic sensing (DAS)—a technology that transforms fiber-optic cables into vibration sensor arrays—has been demonstrated for acoustic monitoring of whales using seafloor telecommunications cables. However, no studies have yet evaluated DAS performance in dynamic, engineered environments, such as floating platforms or moving vessels with complex, dynamic strain loads, despite their relevance to FOWT settings. This study addresses that gap by deploying DAS aboard a boat in Monterey Bay, California, where a fiber-optic cable was lowered using a weighted and suspended mooring line, enabling vertical deployment. Humpback whale vocalizations were captured and identified in the DAS data, noise sources were identified, and DAS data were compared to audio captured by a standalone hydrophone attached to the mooring line and a nearby hydrophone on a cabled observatory. This study is unique in: (1) deploying DAS in a vertical deployment mode, where noise from turbulence, cable vibrations, and other sources posed additional challenges compared to seafloor DAS applications; (2) demonstrating DAS in a dynamic, nonstationary setup, which is uncommon for DAS interrogators typically used in more stable environments; and (3) leveraging looped sections of the cable to reduce the noise floor and mitigate the effects of excessive cable vibrations and strain. This research demonstrates DAS’s ability to capture whale vocalizations in challenging environments, highlighting its potential to enhance underwater acoustic monitoring, particularly in the context of renewable energy development in offshore environments.

Saw, Jaewon↗
DOE OSTI2021

Structural Testing Technology Development: Cooperative Research and Development Final Report, CRADA Number CRD-06-00200

NREL is the only organization in the US that is accredited to conduct tests of wind turbine systems and components in accordance with International Electrotechnical Commission (IEC) test standards. The National Wind Technology Center houses the only full-scale wind turbine blade drivetrain test facilities in the US. To maintain these facilities, accreditation, and the acceptance of the wind industry, NREL must strive continuously to maintain and improve staff capabilities, procedures, facility and equipment. In addition, as wind turbines continue to increase in size, NREL must improve its capability to test the larger components associated with these new turbines. NREL is currently investigating methods to increase blade and drivetrain testing capabilities. Mitsubishi Power Systems (MPS) must also strive to meet the demands of the evolving wind energy industry by developing, proving and manufacturing new, cost-effective blades for its turbines. Mitsubishi has established a joint venture with TPI composites of Rhode Island for manufacturing blades to be installed on US wind turbines. There is an obvious advantage to test these prototype blades in a US facility. The NREL blade test facility is uniquely capable of fulfilling this need. In addition, NREL can provide other testing support to MPS through the use of its dynamometer facility for drivetrain testing and through the use of NREL’s field-testing capabilities for testing wind turbine systems. This CRADA provides the opportunity for both organizations to achieve critical goals in development of wind energy in the US. MPS obtains verification of its wind turbine components and system. NREL obtains improved test capabilities.

17 WIND ENERGY↗
DOE OSTI2023

2022 Prototype Design Development Awardee: RRD Engineering

The innovative BladeRunner distributed wind turbine concept from RRD Engineering will address the need for dependable, efficient, and affordable midsize turbines to power operations in the commercial, industrial, agricultural, military, governmental, and institutional sectors. The inventive design funded by this Competitiveness Improvement Project (CIP) award reduces LCOE by using materials and components that cost and weigh less than those found in conventional turbines, while delivering savings related to manufacturing and maintenance requirements.

CIP↗
DOE OSTI2023

Development of a Metocean Reference Site near the Massachusetts and Rhode Island Wind Energy Areas

This project developed the first long-term U.S.-based offshore MetOcean Reference Site (MORS-1) by capitalizing on a unique combination of one of the few existing publicly available offshore wind energy metocean observational campaigns in the United States and the only existing research-grade offshore fixed tower. Data collected at MORS-1 has facilitated improved wind resource assessments, improved short-term power production estimates, and reduced costs for sensor validation and calibration efforts, which translate into reduced overall wind energy project risk and cost for developers. Now operational, MORS-1 serves the needs of both industry and researchers using a nonprofit, joint industry-academic partnership model. Led by the Woods Hole Oceanographic Institution, the MORS-1 development effort focused on creating both a recognized organizational structure that will ensure support of the MORS-1 by the wider wind energy industry and research community, and a highly validated data collection and sensor validation facility that will serve as the premier location for cost- and uncertainty-reducing resource characterization and research efforts.

17 WIND ENERGY↗
DOE OSTI2023

Tackling Grand Challenges in Wind Energy through a Socio-Technical Perspective

Wind power has an important role to play in tackling climate change. Key challenges in wind energy science and innovation must be overcome to increase the penetration and capability of this technology. However, the success of these efforts heavily depends on how society engages with the development of wind power infrastructure. Consequently, grand challenges exist in both technical and social domains, yet little research has made substantial efforts in connecting them. Here we review the social science and humanities literature on wind energy to illustrate the social dimensions of previously identified technical challenges. We suggest that a socio-technical lens enables an interdisciplinary approach to overcome the prevalent tendency of silo thinking in wind energy research and use it to explore socio-technical grand challenges related to the design, planning, development, operational and end-of-life phases of wind energy. Finally, we provide an outlook for research, practice and innovation, including an interdisciplinary and socio-technical research agenda for wind energy science, renewable energy developments and science policy in general.

end-of-life↗
DOE OSTI2021

Open-Loop Control of Adjustable Tuned Mass Dampers for Floating Wind Turbine Platforms

In this study, we demonstrate the ability of adjustable tuned mass dampers (TMDs) to reduce the platform motion of floating offshore wind turbines (FOWTs). The TMDs are located in the hull and provide control authority by varying the amount of water ballast and compressed air in a reservoir over time. The optimal TMD settings depend on the wind and wave conditions of the FOWT. We present an open-loop control scheme that changes the TMD natural frequency based on sea state and a simple method for estimating the peak wave period and significant wave height. The performance of this open-loop control is compared to ideal control of the TMDs (set knowing the exact sea state), a TMD with a constant natural frequency targeting the design load case with the greatest platform motion, and a baseline set of simulations of the platform without TMDs. The constant natural frequency case performs nearly as effectively as the actively controlled case, suggesting that the TMDs can be simply designed for extreme load conditions and provide consistent control over a range of environments; however, the methods used to find the optimal TMD parameters and estimate sea state statistics could be used in other aspects of FOWT control and design.

artificial intelligence↗
DOE OSTI2025

Simulating Marine Stratocumulus Clouds using Lagrangian Superdroplet Method in ERF

This study investigates the simulation of marine stratocumulus (stratoCu) clouds – common in many offshore and coastal wind energy regions - using Lagrangian Superdroplet Method (SDM) implemented in Energy Research and Forecasting (ERF) model. Developed by the Wind Energy Technologies Office (WETO), ERF is a high-resolution atmospheric modeling tool that relies on traditional bulk microphysics schemes. Under an LLNL-led Laboratory Directed Research and Development (LDRD) project, SDM was integrated into ERF to improve cloud process fidelity by explicitly tracking individual “superdroplets”. This enables a realistic representation of the droplet size spectrum, cloud-atmosphere interactions, and potential feedbacks from wind plants on atmospheric flow and cloud structure.

54 ENVIRONMENTAL SCIENCES↗