Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “volatiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Volatile transport on Venus and implications for surface geochemistry and geology

The high vapor pressure of volatile metal halides and chalcogenides (e.g., of Cu, Zn, Sn, Pb, As, Sb, Bi) at typical Venus surface temperatures, coupled with the altitude-dependent temperature gradient of approximately 8.5 K/km, is calculated to transport volatile metal vapors to the highlands of Venus, where condensation and accumulation will occur. The predicted geochemistry of volatile metals on Venus is supported by observations of CuCl in volcanic gases at Kilauea and Nyiragongo, and large enrichments of these and other volatile elements in terrestrial volcanic aerosols. A one-dimensional finite difference vapor transport model shows the diffusive migration of a thickness of 0.01 to greater than 10 microns/yr of moderately to highly volatile phases (e.g., metal halides and chalcogenides) from the hot lowlands (740 K) to the cold highlands (660 K) on Venus. The diffusive transport of volatile phases on Venus may explain the observed low emissivity of the Venusian highlands, hazes at 6-km altitude observed by two Pioneer Venus entry probes, and the Pioneer Venus entry probe anomalies at 12.5 km.

Brackett, Robert A.↗
NASA NTRS1998

Sources of Terrestrial Volatiles

Atmospheres are found enveloping those planets and satellites best able to hold them. The obvious conclusion is that volatile escape must have played nearly as great a role as volatile supply. A consequence of this view is that volatile supplies were probably much greater than the atmospheres that remain. The likeliest candidates are sources associated with the main events of planetary accretion itself such as volatile-rich planetesimals, or direct gravitational capture of nebular gases. Late asteroidal or cometary volatile-rich veneers are attractive, but they present quantitative difficulties. Comets in particular are inadequate, because the associated mass of stray comets that would have been scattered to the Oort Cloud or beyond is excessive. This difficulty applies to Uranus-Neptune planetesimals as well as to a putative massive early Kuiper Belt. Another potential problem with comets is that the D/H ratio in the three comets for which this has been measured is about twice that of Earth's oceans. Objects falling from a much augmented ancient asteroid belt remain a viable option, but timing is an issue: Can the depopulation of the asteroid belt be delayed long enough that it makes sense to talk of asteroids as a late veneer? Early accretion of asteroids as objects scattered into the maw of infant Earth makes more sense. Another appealing candidate population of volatile-rich objects for the inner solar system would be scattered planetesimals associated with the accretion of Jupiter, for two reasons: (1) Before there was Jupiter, there was no object in the solar system capable of expelling comets efficiently, and (2) the cross section of the inner solar system to stray objects was Greater when there were m many planetesimals.

Zahnle, K. J.↗
NASA NTRS2010

Assessing Requirements Volatility and Risk Using Bayesian Networks

There are many factors that affect the level of requirements volatility a system experiences over its lifecycle and the risk that volatility imparts. Improper requirements generation, undocumented user expectations, conflicting design decisions, and anticipated / unanticipated world states are representative of these volatility factors. Combined, these volatility factors can increase programmatic risk and adversely affect successful system development. This paper proposes that a Bayesian Network can be used to support reasonable judgments concerning the most likely sources and types of requirements volatility a developing system will experience prior to starting development and by doing so it is possible to predict the level of requirements volatility the system will experience over its lifecycle. This assessment offers valuable insight to the system's developers, particularly by providing a starting point for risk mitigation planning and execution.

Russell, Michael S.↗
NASA NTRS2016

Partitioning of U, Th and K Between Metal, Sulfide and Silicate, Insights into the Volatile-Content of Mercury

During the early stages of the Solar System formation, especially during the T-Tauri phase, the Sun emitted strong solar winds, which are thought to have expelled a portion of the volatile elements from the inner solar system. It is therefore usually believed that the volatile depletion of a planet is correlated with its proximity to the Sun. This trend was supported by the K/Th and K/U ratios of Venus, the Earth, and Mars. Prior to the MESSENGER mission, it was expected that Mercury is the most volatile-depleted planet. However, the Gamma Ray Spectrometer of MESSENGER spacecraft revealed elevated K/U and K/Th ratios for the surface of Mercury, much higher than previous expectations. It is possible that the K/Th and K/U ratios on the surface are not a reliable gauge of the bulk volatile content of Mercury. Mercury is enriched in sulfur and is the most reduced of the terrestrial planets, with oxygen fugacity (fO2) between IW-6.3 and IW-2.6 log units. At these particular compositions, U, Th and K behave differently and can become more siderophile or chalcophile. If significant amounts of U and Th are sequestered in the core, the apparent K/U and K/Th ratios measured on the surface may not represent the volatile budget of the whole planet. An accurate determination of the partitioning of these elements between silicate, metal, and sulfide phases under Mercurian conditions is therefore essential to better constrain Mercury's volatile content and assess planetary formation models.

Habermann, M.↗
NASA NTRS2016

Resource Prospector Instrumentation for Lunar Volatiles Prospecting, Sample Acquisition and Processing

Data gathered from lunar missions within the last two decades have significantly enhanced our understanding of the volatile resources available on the lunar surface, specifically focusing on the polar regions. Several orbiting missions such as Clementine and Lunar Prospector have suggested the presence of volatile ices and enhanced hydrogen concentrations in the permanently shadowed regions of the moon. The Lunar Crater Observation and Sensing Satellite (LCROSS) mission was the first to provide direct measurement of water ice in a permanently shadowed region. These missions with other orbiting assets have laid the groundwork for the next step in the exploration of the lunar surface; providing ground truth data of the volatiles by mapping the distribution and processing lunar regolith for resource extraction. This next step is the robotic mission Resource Prospector (RP).Resource Prospector is a lunar mission to investigate strategic knowledge gaps (SKGs) for in-situ resource utilization (ISRU). The mission is proposed to land in the lunar south pole near a permanently shadowed crater. The landing site will be determined by the science team with input from broader international community as being near traversable landscape that has a high potential of containing elevated concentrations of volatiles such as water while maximizing mission duration. A rover will host the Regolith Environment Science and Oxygen Lunar Volatile Extraction (RESOLVE) payload for resource mapping and processing. The science instruments on the payload include a 1-meter drill, neutron spectrometer, a near infrared spectrometer, an operations camera, and a reactor with a gas chromatograph-mass spectrometer for volatile analysis.

Lunar Crater↗
NASA NTRS2015

Evaluation of Volatile Species in Green Monopropellant Project

NASA is interested in green monopropellants to replace hydrazine in reaction control systems (RCSs). Some current NASA programs require reduced vapor pressure and low toxicity monopropellant (green) and superior performance (specific impulse and density) formulations. Earlier vapor phase studies of a candidate green monopropellant at the NASA White Sands Test Facility (WSTF) showed the presence of a volatile species that warranted further investigation. The purpose of this study was to further characterize the volatile species and to evaluate it. The evaluation was with respect to whether the volatile species was an impurity or how it is formed, and to use that information to examine whether its presence as an impurity can be eliminated during formulation. The evaluation also considered whether formation of the volatile impurity could be prevented while not compromising the propellant. To reduce variables associated with evaluation of the propellant formulation as a whole, a precursor to one of the individual components in the propellant formulation was subjected to a NASA Standard 6001B Flammability, Off-gassing, and Compatibility Requirements and Test Procedures "Determination of Off-gassed Products (Test 7)". Testing took place in the NASA WSTF Molecular Desorption and Analysis Laboratory. One gram of the precursor was placed in a flask within a specimen container. After thermal conditioning for 72 +/- 1 h at 50 +/- 3 deg C (122 +/- 5 deg F), the atmosphere inside the specimen container was analyzed for off-gassed compounds by cryotrap gas chromatography-mass spectrometry (GC-MS) and fixed sample loop GC-flame ionization detection (GC-FID). The specimen container used was glass to minimize potential catalytic surfaces. The identification of compounds was difficult due to the complexity of the vapor phase concentrations and overlapping chromatographic peaks and mass spectra. However, eleven compounds were specifically identified and five compounds or classes of compounds were reported as unidentified. Quantitation of most of the compounds, including unidentified compounds, was as methane. Quantitating compounds or classes of compounds that were detected but for which specific calibration is not established as methane is in accordance with the Test 7 standard protocol. The thermal decomposition temperature of the precursor was significantly higher than the test temperature. Based on thermal decomposition temperature and on an examination of the structure and chemistry of the identified volatile species, the presence of the volatile species appears to be chemically reasonable with respect to the propellant formulation and is at this time attributed to impurities. Further examination of the overall propellant formulation process (including the individual components' synthesis processes) and process quality control (including purity of reagents and possible decomposition reactions) is indicated.

Greene, Benjamin↗
NASA NTRS2017

Volatiles in High-K Lunar Basalts

Chlorine is an unusual isotopic system, being essentially unfractionated ((delta)Cl-37 approximately 0 per mille ) between bulk terrestrial samples and chondritic meteorites and yet showing large variations in lunar (approximately -4 to +81 per mille), martian, and vestan (HED) samples. Among lunar samples, the volatile-bearing mineral apatite (Ca5(PO4)3[F,Cl,OH]) has been studied for volatiles in K-, REE-, and P (KREEP), very high potassium (VHK), low-Ti and high-Ti basalts, as well as samples from the lunar highlands. These studies revealed a positive correlation between in-situ (delta)Cl-37 measurements and bulk incompatible trace elements (ITEs) and ratios. Such trends were interpreted to originate from Cl isotopic fractionation during the degassing of metal chlorides during or shortly after the differentiation of the Moon via a magma ocean. In this study, we investigate the volatile inventories of a group of samples for which new-era volatile data have yet to be reported - the high-K (greater than 2000 ppm bulk K2O), high-Ti, trace element-rich mare basalts. We used isotope imaging on the Cameca NanoSIMS 50L at JSC to obtain the Cl isotopic composition [((Cl-37/(35)Clsample/C-37l/(35)Clstandard)-1)×1000, to get a value in per thousand (per mille)] which ranges from approximately -2.7 +/- 2 per mille to +16.1 +/- 2 per mille (2sigma), as well as volatile abundances (F & Cl) of apatite in samples 10017, 10024 & 10049. Simply following prior models, as lunar rocks with high bulk-rock abundances of ITEs we might expect the high-K, high-Ti basalts to contain apatite characterized by heavily fractionated (delta)Cl-37 values, i.e., Cl obtained from mixing between unfractionated mantle Cl (approximately 0 per mille) and the urKREEP reservoir (possibly fractionated to greater than +25 per mille.). However, the data obtained for the studied samples do not conform to either the early degassing or mixing models. Existing petrogentic models for the origin of the high-K, high-Ti basalts do not include urKREEP assimilation into their LMO cumulate sources. Therefore, Cl in these basalts either originated from source region heterogeneity or through assimilation or metasomatism by volatile and incompatible trace element rich materials. The new data presented here could provide evidence for the existence of region(s) in the lunar interior that are ITE-enriched and contain Cl that does not share isotopic affinities with lunar urKREEP, possibly representing the composition of the purported 'neuKREEP'.

Barnes, Jessica J.↗
NASA NTRS2016

Lunar Advanced Volatile Analysis Integration and Testing

The Regolith and Environment Science Oxygen and Lunar Volatile Extraction (RESOLVE) payload is part of Resource Prospector (RP) along with a rover and a lander that are expected to launch in 2020. RP will identify volatile elements that may be combined and collected to be used for fuel, air, and water in order to enable deeper space exploration. The Resource Prospector mission is a key part of In-Situ Resource Utilization (ISRU). The demand for this method of utilizing resources at the site of exploration is increasing due to the cost of resupply missions and deep space exploration goals. The RESOLVE payload includes the Lunar Advanced Volatile Analysis (LAVA) subsystem. The main instrument used to identify the volatiles evolved from the lunar regolith is the Gas Chromatograph-Mass Spectrometer (GC-MS). LAVA analyzes the volatiles emitted from the Oxygen and Volatile Extraction Node (OVEN) Subsystem. The objective of OVEN is to obtain, weigh, heat and transfer evolved gases to LAVA through the connection between the two subsystems called the LOVEN line. This paper highlights the work completed during a ten week internship that involved the integration, testing, data analysis, and procedure documentation of two candidate mass spectrometers for the LAVA subsystem in order to aid in determining which model to use for flight. Additionally, the examination of data from the integrated Resource Prospector '15 (RP' 15) field test will be presented in order to characterize the amount of water detected from water doped regolith samples.

In-Situ Resource Utilization↗
NASA NTRS2018

Assessment of Volatile Depletion Mechanisms for the Moon - Pre-Cursors, Giant Impact, Core Formation, Post-Impact Loss

The volatile element depletions in the Moon have been recognized for decades. Multiple explanations have been debated, and arguments have become more quantitative, in large part due to new elemental partitioning and isotopic data. Depletions in pre-cursor materials and due to post-accretion degassing have been evaluated using isotopic data. Partitioning of many volatile elements into metallic cores can now be evaluated for many volatile siderophile elements (VSE). Here is presented an evaluation of the role of core formation for 12 volatile siderophile elements for which partitioning data is now available. Examination of all 12 elements at once allows recognition of general trends, without undue focus on one element. Ga, Ge, Zn, Sn, As, Sb, Cd, Ag, Bi, P, In, Cu are all moderately to highly volatile, and will be discussed in their order of volatility as gauged by their 50 percent condensation temperature.

Righter, K.↗
NASA NTRS2018

A Tale of "Two" Comets: The Primary Volatile Composition of Comet 2P/Encke Across Apparitions and Implications for Cometary Science

The highly favorable 2017 apparition of 2P/Encke allowed the first comprehensive comparison of primary volatile abundances in a given comet across multiple apparitions. This apparition offered opportunities to address pressing questions in cometary science, including investigating evolutionary and/or heliocentric distance (R(sub h)) effects on volatile production, sampling the hypervolatiles CO and CH4 in an ecliptic comet, and measuring volatile release at small R(sub h). The faintness and frequently low geocentric velocity of ecliptic comets during most apparitions make our near-infrared observations of these hypervolatiles rare and of high scientific impact. We characterized the volatile composition of 2P/Encke on three post-perihelion dates using the iSHELL spectrograph at the NASA Infrared Telescope Facility on Maunakea, HI. We detected fluorescent emission from nine primary volatiles (H2O, CO, C2H6, CH3OH, CH4, H2CO, NH3, OCS, and HCN) and three fragment species (OH*, NH2, and CN), and obtained a sensitive upper limit for C2H2. We report rotational temperatures, production rates, and mixing ratios (abundances relative to H2O). Compared to mean abundances in comets observed to date in the near-infrared, mixing ratios of trace gases in 2P/Encke were depleted for all species except H2CO and NH3, which were “normal.” The detection of the hypervolatiles CO and CH4 is particularly notable given the paucity of measurements in ecliptic comets. We observed significant differences in primary volatile composition compared to published pre-perihelion results from 2003 at larger R(sub h). We discuss possible mechanisms for these differences and discuss these results in the context of findings from the Rosetta mission and ground-based studies of comets.

Roth, Nathan X.↗
NASA NTRS2021

Volatiles Investigating Polar Exploration Rover (VIPER)

VIPER is a lunar volatiles detection and measurement mission that will be launched as a payload on the CLPS (Commercial Lunar Payload Services) provided Astrobotic's Griffin lander to the lunar south polar region. VIPER includes a suite of rover-mounted instruments that will conduct science and map volatiles (especially hydrogen-bearing volatiles). The VIPER rover is also designed to excavate volatiles such as hydrogen, oxygen, and water from the Moon. After landing the VIPER rover will travel to investigate a range of Ice Stability Regions (ISRs) across scales from 100s of meters to kilometers and conduct surface and subsurface assessment of lunar water and other volatiles. The VIPER science mission team will use the instrument data to characterize the nature of the volatiles in the area and to extrapolate these data to create global lunar water resource maps. The expected lunar surface mission duration is up to four lunar days, with active surface operations during the periods when both Sun exposure and direct to Earth (DTE) communication conditions overlap. When comm and Sun are not both available, VIPER will go into ‘Safe Haven operations’ and maintain survival temperatures until Sun and comm return. The rover is controlled in near-real time and science decisions are made both tactically (short-term) and strategically (longer-term) to achieve the mission science success criteria and objectives.

Anthony Colaprete↗
NASA NTRS2022

VESIcal: An Open-source Thermodynamic Model Engine for Mixed Volatile (H2O-CO2) Solubility in Silicate Melts

Modeling the solubility of volatiles in silicate melts is fundamental to the interpretation of volcanic systems and has implications for magma dynamics, eruption style, and material transport between the mantle, crust, and atmosphere. Recent advancements in computational capabilities and access to computing tools has outpaced the functionality and extensibility of previously available modeling platforms. Here we present VESIcal (Volatile Equilibria and Saturation Index calculator), the first comprehensive modeling tool for H2O, CO2, and mixed (H2O-CO2) solubility in silicate melts that: a) allows users access to seven popular models, with easy inter-comparison between models; b) provides universal functionality for all models (e.g., functions for calculating saturation pressures, degassing paths, etc.); c) can process large datasets (1,000’s of samples) automatically; d) can output computed data into an Excel spreadsheet or CSV file for post-modeling analysis; e) integrates plotting capabilities directly within the tool; and f) provides all of this within the framework of a python library, making the tool extensible by the user and allowing any of the model functions to be incorporated into any other code capable of calling python.Here we will provide a demonstration of VESIcal and its capabilities with applications to various volcanic processes affected by volatiles. VESIcal represents the first tool capable of directly comparing multiple solubility models and equations of state. We find that commonly used models predict surprisingly different volatile solubilities, particularly for pure CO2 or mixed CO2-H2O fluids. Even for melt compositions that are well represented in the calibration datasets of multiple models (e.g., MORBs), calculated solubilities for pure CO2 and pure H2O can deviate from one another by factors of >2 leading to 2x deviations in calculated saturation pressures (e.g., 5 to 10 kbar). The solubility of CO2 predicted by different rhyolitic models also differs substantially, overwhelming other sources of uncertainty such as analytical errors on measurements of volatile contents or uncertainties in crustal density profiles. This highlights the importance of model choice when drawing geological conclusions based on volatiles in magmas.

Kayla Iacovino↗
NASA NTRS2024

The Relationship Between Volatile Element Abundances and Iron Carrying Capacity in Lunar Volcanic and Impact Vapors

The highly volatile elements (e.g. H, C, S, Cl) released during lunar volcanism provide important insights into the bulk volatile composition of the Moon. Once erupted, some fraction of the species containing these elements may have migrated to the poles where they could have become sequestered in shadowed cold traps such as those found near the lunar South pole. The volatiles trapped in the lunar South pole are of great interest to the upcoming Artemis missions, which will be operating nearby and could sample some of those materials. Volcanic vapor deposits in the polar regions might also be supplemented by volatiles from other sources both exogenous (i.e. comets) and endogenous (i.e. remobilization of lunar volatiles by impact). Characterizing these endogenous sources is challenging because the highly volatile elements often leave little trace behind in the rocks themselves, which are inherently refractory by nature. Minerals are found on vug, vesicle, or fracture surfaces that have characteristics consistent with phases formed via direct deposition of a vapor, as opposed to crystallization from a liquid or via solid state decomposition. One common vapor-deposited species is metallic Fe, typically observed as subhedral to euhedral crystals found on vug or vesicle walls in mare basalts and on select breccia clast surfaces in regolith soil samples returned from the Moon. A particularly striking example is seen below in Fig. 1, where numerous Fe crystals are deposited onto the wall of a vug in Apollo 17 basalt sample 71036. Euhedral Fe crystals are not very common in Apollo breccia samples, though this may be from the limited number of systematic searches that have been performed. However, when Fe crystals are found, they can occur in extremely high abundance(e.g., sample 15402 which was specifically selected because of its numerous Fe crystals, was found to have a clast with 477 euhedral Fe crystals in a 570 x 570 μm area). What struck us as interesting about this was not only that it takes a large amount of Fe to make these crystal-rich deposits, but also that these crystal-rich deposits are not ubiquitous, and therefore they must be controlled by some aspect of their depositional conditions that varies. Since those conditions are inherently difficult to investigate and are critically interesting, we used thermochemical modeling as a tool to investigate the relationship between vapor-deposited Fe and various intensive and extensive parameters. We assumed that a high abundance of Fe in the vapor is required to form these crystals, thus the mass of Fe in the vapor was used to determine the plausibility of the vapor-deposited, euhedral Fe crystals observed in Apollo samples.

thermodynamics↗
NASA NTRS2015

Resource Prospector: A Lunar Volatiles Prospecting and ISRU Demonstration Mission

A variety of recent observations have indicated several possible reservoirs of water and other volatiles. These volatiles, and in particular water, have the potential to be a valuable or enabling resource for future exploration. NASA's Human Exploration and Operations Mission Directorate (HEOMD) Advanced Exploration Systems (AES) is supporting the development of Resource Prospector (RP) to explore the distribution and concentration of lunar volatiles prospecting and to demonstrate In-Situ Resource Utilization (ISRU). The mission includes a NASA developed rover and payload, and a lander will most likely be a contributed element by an international partner or the Lunar Cargo Transportation and Landing by Soft Touchdown (CATALYST) initiative. The RP payload is designed to: (1) locate near-subsurface volatiles, (2) excavate and analyze samples of the volatile-bearing regolith, and (3) demonstrate the form. extractability and usefulness of the materials. RP is being designed with thought given to its extensibility to resource prospecting and ISRU on other airless bodies and Mars. This presentation will describe the Resource Prospector mission, the payload and measurements, and concept of operations

In-Situ Resource Utilization (ISRU)↗
NASA NTRS2015

Spillage of Lunar Polar Crater Volatiles onto Adjacent Terrains: The Case for Dynamic Processes

We present an investigation of the release and transport of lunar polar crater volatiles onto topside regions surrounding the cold traps. The volatiles are liberated via surface energization processes associated with the harsh space environment, including solar wind plasma sputtering and impact vaporization. We find that some fraction of these volatiles can migrate from crater floors onto topside regions (those regions directly adjacent to and above the polar crater floors), and that these surrounding terrains should contain a sampling of the material originating within the crater itself. It is concluded that the nature of the volatile content on crater floors can be obtained by sampling the surface volatiles that have migrated or "spilled out" onto the adjacent terrain. This "spillage" effect could make human or robotic prospecting for crater resources significantly easier, since an assessment may not require direct entry into the very harsh polar crater environment. We also suggest that there are dynamic processes actively operating on the crater floors, and we estimate their source rates assuming dynamic equilibrium of the observed water frost and our modeled loss rates.

Vaporization↗
NASA NTRS2020

Modification of Caloris ejecta blocks by long-lived mass-wasting: A volatile-driven process?

The Caloris basin is the largest well-preserved impact basin on Mercury. As such, Caloris ejecta afford us an opportunity to study material from Mercury's deep interior with remote sensing. We have made observations of the geomorphology, colour, distribution, and flank slopes of the circum-Caloris knobs. Our observations suggest that these circum-Caloris knobs are modified ejecta blocks from the Caloris impact. High-resolution MESSENGER images show that knobs are conical and relatively uncratered compared with the surrounding plains, which implies the knobs have undergone resurfacing. We have observed material that has sloughed off knobs superposing impact craters that demonstrably postdate the Caloris impact, which requires some knob modification to have been more recent. We have observed hollows, depressions in Mercury's surface generally believed to have been caused by volatile-loss, on and closely associated with several knobs, which indicates that many knobs contain volatile material and that knob modification could extend into Mercury's recent past. Our measurements show that knob flanks typically have slopes of ∼21°, which is steep for a mound of unconsolidated material that was originally emplaced ∼3.8 Ga. The conical shape of knobs, their steep slopes, the dearth of superposed craters on knobs, and knob superposition relationships with other landforms suggest that Caloris ejecta blocks of arbitrary original shape were modified into their present shapes by long-lived mass-wasting. Mass-wasting must have dominated over impact gardening, which would have produced domal morphologies only. We suggest that mass-wasting was probably driven by volatile-loss, in a manner analogous to terrestrial landforms called ‘molards’. If the circum-Caloris knobs are analogous to molards, then they represent a landform and a process hitherto undocumented on Mercury, with implications for the volatile content of the planet's interior. These knobs therefore are prime targets for BepiColombo, which could search for fresh failures and volatile exposures in the knobs.

Mercury; Caloris basin; impact ejecta; volatiles; ↗
NASA NTRS2024

Application of Long-Path Gas Cell Assisted Infrared Spectroscopy for Detection of Lunar Volatiles and Advanced Curation Efforts

The motivation behind analyzing gaseous samples from the Permanently Shadowed Regions (PSRs) on the lunar surface is built upon the volatiles observed during the LCROSS mission. Advanced curation techniques under cold conditions are essential to the critical scientific analysis of these returned samples. The detection of various volatiles in returned samples by gas-phase infrared (IR) spectroscopy is known to be a powerful tool to understand the resources present in planetary bodies and Astro-materials. The identification and quantification of volatile compounds in returned planetary samples and regolith simulants by advanced and custom-built analytical devices are areas of primary research interest in our group and the Planetary Exploration & Astromaterials Research Laboratory (PEARL) facility. In this context, we discuss recent advancements and experimental results for quick analysis of the major volatiles detected by the LCROSS (water, CO 2 , CH 3 OH, and NH 3 ) by a long-path gas cell/FTIR (Fourier Transform Infrared) spectrometer system. The applicability of this system is demonstrated by qualitative analysis of a series of volatiles measured individually. In addition, the linear dependence of absorption intensity on headspace sample volumes was checked by measuring gas-phase IR absorption spectra of increasing volumes of pure CO 2 gas aliquots. Finally, the instrument performance was evaluated by measuring the relative concentration of NH 3 (g) in methanol solution.

Curation↗
DOE OSTI2025

Volatile traits expand the microbial playbook

Microbial metabolic functions are increasingly conceptualized as fitness-regulating traits. However, volatile compounds (the volatilome), despite their key roles in metabolism and ecology, are often overlooked in trait-based frameworks. We propose that volatile traits not only reflect ecological strategies but also shape them by mediating responses to selection pressures. Their volatility affects diffusion, substrate access, and interactions across space, conferring selective advantages as resources or waste products. We outline approaches to incorporate volatile traits into predictive models to improve understanding of microbial selection and community dynamics. Furthermore, this integration enables a more holistic view of microbial life by accounting for the ecological and evolutionary consequences of volatile-mediated processes.

54 ENVIRONMENTAL SCIENCES↗