Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variable flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Computation of Turbulent Wake Flows in Variable Pressure Gradient

Transport aircraft performance is strongly influenced by the effectiveness of high-lift systems. Developing wakes generated by the airfoil elements are subjected to strong pressure gradients and can thicken very rapidly, limiting maximum lift. This paper focuses on the effects of various pressure gradients on developing symmetric wakes and on the ability of a linear eddy viscosity model and a non-linear explicit algebraic stress model to accurately predict their downstream evolution. In order to reduce the uncertainties arising from numerical issues when assessing the performance of turbulence models, three different numerical codes with the same turbulence models are used. Results are compared to available experimental data to assess the accuracy of the computational results.

Duquesne, N.↗
NASA NTRS2006

Accuracy Quantification of the Loci-CHEM Code for Chamber Wall Heat Transfer in a GO2/GH2 Single Element Injector Model Problem

A robust rocket engine combustor design and development process must include tools which can accurately predict the multi-dimensional thermal environments imposed on solid surfaces by the hot combustion products. Currently, empirical methods used in the design process are typically one dimensional and do not adequately account for the heat flux rise rate in the near-injector region of the chamber. Computational Fluid Dynamics holds promise to meet the design tool requirement, but requires accuracy quantification, or validation, before it can be confidently applied in the design process. This effort presents the beginning of such a validation process for the Loci-CHEM CFD code. The model problem examined here is a gaseous oxygen (GO2)/gaseous hydrogen (GH2) shear coaxial single element injector operating at a chamber pressure of 5.42 MPa. The GO2/GH2 propellant combination in this geometry represents one the simplest rocket model problems and is thus foundational to subsequent validation efforts for more complex injectors. Multiple steady state solutions have been produced with Loci-CHEM employing different hybrid grids and two-equation turbulence models. Iterative convergence for each solution is demonstrated via mass conservation, flow variable monitoring at discrete flow field locations as a function of solution iteration and overall residual performance. A baseline hybrid was used and then locally refined to demonstrate grid convergence. Solutions were obtained with three variations of the k-omega turbulence model.

West, Jeff↗
NASA NTRS2006

Accuracy Quantification of the Loci-CHEM Code for Chamber Wall Heat Fluxes in a G02/GH2 Single Element Injector Model Problem

A robust rocket engine combustor design and development process must include tools which can accurately predict the multi-dimensional thermal environments imposed on solid surfaces by the hot combustion products. Currently, empirical methods used in the design process are typically one dimensional and do not adequately account for the heat flux rise rate in the near-injector region of the chamber. Computational Fluid Dynamics holds promise to meet the design tool requirement, but requires accuracy quantification, or validation, before it can be confidently applied in the design process. This effort presents the beginning of such a validation process for the Loci- CHEM CPD code. The model problem examined here is a gaseous oxygen (GO2)/gaseous hydrogen (GH2) shear coaxial single element injector operating at a chamber pressure of 5.42 MPa. The GO2/GH2 propellant combination in this geometry represents one the simplest rocket model problems and is thus foundational to subsequent validation efforts for more complex injectors. Multiple steady state solutions have been produced with Loci-CHEM employing different hybrid grids and two-equation turbulence models. Iterative convergence for each solution is demonstrated via mass conservation, flow variable monitoring at discrete flow field locations as a function of solution iteration and overall residual performance. A baseline hybrid grid was used and then locally refined to demonstrate grid convergence. Solutions were also obtained with three variations of the k-omega turbulence model.

West, Jeff↗
NASA NTRS1967

Pump simulator provides variable pressure-flow characteristics

Pump simulator with variable pressure flow characteristics permits ready experimental determination of optimum pump-load matching. It has been successfully used to investigate the effect of feed pump characteristics on the stability of a Rankine system boiler.

Packe, D. R.↗
NASA NTRS1970

Hydraulic characteristics of flow through miniature slits

Hydraulic characteristics of micro-orifices arrayed in close proximity across the face of a liquid fuel injector are studied. Effects of geometry and flow variables on discharge coefficients and flow regimes are determined, as well as visible characteristics of the emerging liquid streams.

Powell, W. B.↗
NASA NTRS1991

Experiments On Schemes For Adaptive-Wall Wind Tunnels

Report discusses experimental investigation of various convergence schemes for adaptive-wall wind tunnel. Results show side-wall-pressure measurements used as flow variables yield same unconfined-flow conditions as those obtained by measuring streamwise and perpendicular components of velocity with laser Doppler velocimeter. Justifies use of influence coefficients in one-step and iterative convergence schemes. Also shows with one-step convergence scheme, satisfactory adaptation obtained when number of iterations reduced to one (or sometimes two).

Celik, Z. Z.↗
NASA NTRS1992

A comparison of calibration techniques for hot-wires operated in subsonic compressible slip flows

This paper focuses on the correlation of constant temperature anemometer voltages to velocity, density, and total temperature in the transonic slip flow regime. Three different calibration schemes were evaluated. The ultimate use of these hot-wire calibrations is to obtain fluctuations in the flow variables. Without the appropriate mean flow sensitivities of the heated wire, the measurements of these fluctuations cannot be accurately determined.

Jones, Gregory S.↗
NASA NTRS2017

Uncertainty Quantification of the FUN3D-Predicted NASA CRM Flutter Boundary

A nonintrusive point collocation method is used to propagate parametric uncertainties of the flexible Common Research Model, a generic transport configuration, through the unsteady aeroelastic CFD solver FUN3D. A range of random input variables are considered, including atmospheric flow variables, structural variables, and inertial (lumped mass) variables. UQ results are explored for a range of output metrics (with a focus on dynamic flutter stability), for both subsonic and transonic Mach numbers, for two different CFD mesh refinements. A particular focus is placed on computing failure probabilities: the probability that the wing will flutter within the flight envelope.

Stanford, Bret K.↗
NASA NTRS1993

Mixing of multiple jets with a confined subsonic crossflow

An account is given of experimental and computational results on the mixing of single, double, and opposed rows of jets characterized by an either isothermal or variable temperature mainstream in a confined subsonic crossflow; these flow configurations are typical of gas turbine combustor dilution chambers. It is established that the momentum-flux ratio is the most significant flow variable. Combinations of flow and geometry yielding optimum mixing were identified from experimental and computational results. The orifice spacing and momentum-flux relationships affected jet structure, which was significantly different between jets injected from the inner wall of a turn and those injected from the outer wall.

Holdeman, James D.↗
NASA NTRS1992

Variable-Orifice Oxygen-Flow Regulator

Variable-orifice flow-control valve switchable between fully and partially opened positions. Straight-through flow patch minimizes high-speed impacts of entrained particles, reducing erosion and accidental ignition. Designed for use with oxygen, also used with variety of liquids and gases.

Christianson, Rollin C.↗
NASA NTRS1980

Minimum Energy Test Direction Design in the Control of Cryogenic Wind Tunnels

The advent of the cryogenic wind tunnel concept is attributable to the need for high Reynolds number flow in wind tunnels. The cryogenic wind tunnel concept consists of operating the test medium of a conventional tunnel at cryogenic temperatures down to 80 K. Nitrogen gas, cooled by injected liquid nitrogen, proves to be ideal for the cryogenic tunnel test medium because of its near perfect behavior in insentropic flow. Cryogenic operation of a wind tunnel results in reduced fan power consumption and no penalty in flow dynamic pressure. In a cryogenic tunnel, the flow parameters (Reynolds number, Mach number and flow dynamic pressure) can be independently controlled by separately controlling the tunnel flow variables: total temperature, test section mass flow, and the tunnel total pressure. The problem of closed-loop control of the tunnel total temperature, flow Mach number, and total pressure is addressed and reported.

Balakrishna, S.↗
NASA NTRS1996

Aeropropulsion Technology (APT). Task 23 - Stator Seal Cavity Flow Investigation

The focus of NASA Contract NAS3-25950 Task 23 was to numerically investigate the flow through an axial compressor inner-banded stator seal cavity. The Allison/NASA developed ADPAC code was used to obtain all flow predictions. Flow through a labyrinth stator seal cavity of a high-speed compressor was modeled by coupling the cavity flow path and the main flow path of the compressor. A grid resolution study was performed to guarantee adequate grid spacing was used. Both unsteady rotor-stator-rotor interactions and steady-state isolated blade calculations were performed with and without the seal cavity present. A parameterized seal cavity study of the high-speed stator seal cavity collected a series of solutions for geometric variations. The parameter list included seal tooth gap, cavity depth, wheel speed, radial mismatch of hub flowpath, axial trench gap, hub corner treatments, and land edge treatments. Solution data presented includes radial and pitchwise distributions of flow variables and particle traces describing the flow character.

Heidegger, N. J.↗
NASA NTRS2018

Satellite Observations and Modeling to Understand the Lower Mekong River Basin Streamflow Variability

In this work, we have used the Soil & Water Assessment Tool (SWAT) to examine streamflow variability of the Lower Mekong River Basin (LMRB) associated with changes in the Upper Mekong River Basin (UMRB) inflows. Two hypothetical experiments were formulated and evaluated for the LMRB, where we conducted runoff simulations with multiple inflow changes that include upstream runoff yield increase and decrease scenarios. Streamflow variability of the LMRB was quantified by two streamflow metrics that explain flow variability and predictability, and high flow disturbance. The model experiments were performed for the Lower Mekong River Basin with identical climate, soil, and other watershed characteristics data. Remote sensing precipitation (Tropical Rainfall Measurement Mission, TRMM, and Global Precipitation Measurement mission, GPM), meteorological data as well as spatial data that include a digital elevation model, newly developed soil information (Harmonized World Soil Database, HWSD), and land use and land cover were processed as input to the LMRB model simulations. Observed daily streamflow data along the Lower Mekong River from Chiang Sean, Thailand to Kratie, Cambodia were used for calibration and validation. Our work results suggest that the Lower Mekong River streamflow is highly variable and has a low predictability (Colwell index of about 32%). We found that releasing more water from upstream Mekong during rainfall months by 30% would result in a reduction in the Lower Mekong streamflow predictability by about 21%. This reduction in predictability is mainly attributed to a decrease in the Contingency index. Our work shows that the ability to predict floods/droughts at the Lower Mekong River would be reduced if there is any anticipated change (i.e., increase/decrease) from UMRB releases. Our results also show that releasing more flows from the upstream Mekong would also affect flood duration and the frequency of flood occurrences downstream. The results of this work thus help to quantify the sensitivity of streamflow variability at the Lower Mekong River Basin to upstream anthropogenic changes.

Streamflow Predictability↗
NASA NTRS2002

Pulmonary venous flow determinants of left atrial pressure under different loading conditions in a chronic animal model with mitral regurgitation

BACKGROUND: The aim of our study was to quantitatively compare the changes and correlations between pulmonary venous flow variables and mean left atrial pressure (mLAP) under different loading conditions in animals with chronic mitral regurgitation (MR) and without MR. METHODS: A total of 85 hemodynamic conditions were studied in 22 sheep, 12 without MR as control (NO-MR group) and 10 with MR (MR group). We obtained pulmonary venous flow systolic velocity (Sv) and diastolic velocity (Dv), Sv and Dv time integrals, their ratios (Sv/Dv and Sv/Dv time integral), mLAP, left ventricular end-diastolic pressure, and MR stroke volume. We also measured left atrial a, x, v, and y pressures and calculated the difference between v and y pressures. RESULTS: Average MR stroke volume was 10.6 +/- 4.3 mL/beat. There were good correlations between Sv (r = -0.64 and r = -0.59, P <.01), Sv/Dv (r = -0.62 and r = -0.74, P <.01), and mLAP in the MR and NO-MR groups, respectively. Correlations were also observed between Dv time integral (r = 0.61 and r = 0.57, P <.01) and left ventricular end-diastolic pressure in the MR and NO-MR groups. In velocity variables, Sv (r = -0.79, P <.001) was the best predictor of mLAP in both groups. The sensitivity and specificity of Sv = 0 in predicting mLAP 15 mm Hg or greater were 86% and 85%, respectively. CONCLUSION: Pulmonary venous flow variables correlated well with mLAP under altered loading conditions in the MR and NO-MR groups. They may be applied clinically as substitutes for invasively acquired indexes of mLAP to assess left atrial and left ventricular functional status.

Pulmonary Veins/physiopathology↗
NASA NTRS1989

Power flows and Mechanical Intensities in structural finite element analysis

The identification of power flow paths in dynamically loaded structures is an important, but currently unavailable, capability for the finite element analyst. For this reason, methods for calculating power flows and mechanical intensities in finite element models are developed here. Formulations for calculating input and output powers, power flows, mechanical intensities, and power dissipations for beam, plate, and solid element types are derived. NASTRAN is used to calculate the required velocity, force, and stress results of an analysis, which a post-processor then uses to calculate power flow quantities. The SDRC I-deas Supertab module is used to view the final results. Test models include a simple truss and a beam-stiffened cantilever plate. Both test cases showed reasonable power flow fields over low to medium frequencies, with accurate power balances. Future work will include testing with more complex models, developing an interactive graphics program to view easily and efficiently the analysis results, applying shape optimization methods to the problem with power flow variables as design constraints, and adding the power flow capability to NASTRAN.

Hambric, Stephen A.↗
NASA NTRS2002

Understanding the Solar Sources of In Situ Observations

The solar wind can, to a good approximation be described as a two component flow with fast, tenuous, quiescent flow emanating from coronal holes, and slow, dense and variable flow associated with the boundary between open and closed magnetic fields. In spite of its simplicity, this picture naturally produces a range of complex heliospheric phenomena, including the presence, location, and orientation of corotating interaction regions and their associated shocks. In this study, we apply a two-step mapping technique, incorporating a magnetohydrodynamic model of the solar corona, to bring in situ observations h m Ulysses, WIND, and ACE back to the solar surface in an effort to determine some intrinsic properties of the quasi-steady solar wind. In particular, we find that a "layer" of approx. 35,000 h n exists between the Coronal Hole Boundary (CHB) and the fast solar wind, where the wind is slow and variable. We also- derive a velocity gradient within large polar coronal boles (that were present during Ulysses rapid latitude scan) as a function of distance from the CHB. We find that nu = 713 km/s + 3.2 d, where d is the angular distance from the CHB boundary in degrees.

Riley, Pete↗
NASA NTRS1977

Updating prediction models by dynamical relaxation - An examination of the technique

A dynamical relaxation technique for updating prediction models is analyzed with the help of the linear and nonlinear barotropic primitive equations. It is assumed that a complete four-dimensional time history of some prescribed subset of the meteorological variables is known. The rate of adaptation of the flow variables toward the true state is determined for a linearized f-model, and for mid-latitude and equatorial beta-plane models. The results of the analysis are corroborated by numerical experiments with the nonlinear shallow-water equations.

Davies, H. C.↗