Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trash”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Trash-to-Gas: Using Waste Products to Minimize Logistical Mass During Long Duration Space Missions

Just as waste-to-energy processes utilizing municipal landftll and biomass wastes are finding increased terrestrial uses, the Trash-to-Gas (TtG) project seeks to convert waste generated during spaceflight into high value commodities. These include methane for propulsion and water for life support in addition to a variety of other gasses. TtG is part of the Logistic Reduction and Repurposing (LRR) project under the NASA Advanced Exploration Systems Program. The LRR project will enable a largely mission-independent approach to minimize logistics contributions to total mission architecture mass. LRR includes technologies that reduce the amount of consumables that need to be sent to space, repurpose items sent to space, or convert wastes to commodities. Currently, waste generated on the International Space Station is stored inside a logistic module which is de-orbited into Earth's atmosphere for destruction. The waste consists of food packaging, food, clothing and other items. This paper will discuss current results on incineration as a waste processing method. Incineration is part of a two step process to produce methane from waste: first the waste is converted to carbon oxides; second, the carbon oxides are fed to a Sabatier reactor where they are converted to methane. The quantities of carbon dioxide, carbon monoxide, methane and water were measured under the different thermal degradation conditions. The overall carbon conversion efficiency and water recovery are discussed.

Hintze, Paul. E.↗
NASA NTRS2013

Trash-to-Gas: Using Waste Products to Minimize Logistical Mass During Long Duration Space Missions

Just as waste-to-energy processes utilizing municipal landftll and biomass wastes are finding increased terrestrial uses, the Trash-to-Gas (TtG) project seeks to convert waste generated during spaceflight into high value commodities. These include methane for propulsion and water for life support in addition to a variety of other gasses. TtG is part of the Logistic Reduction and Repurposing (LRR) project under the NASA Advanced Exploration Systems Program. The LRR project will enable a largely mission-independent approach to minimize logistics contributions to total mission architecture mass. LRR includes technologies that reduce the amount of consumables that need to be sent to space, repurpose items sent to space, or convert wastes to commodities. Currently, waste generated on the International Space Station is stored inside a logistic module which is de-orbited into Earth's atmosphere for destruction. The waste consists of food packaging, food, clothing and other items. This paper will discuss current results on incineration as a waste processing method. Incineration is part of a two step process to produce methane from waste: first the waste is converted to carbon oxides; second, the carbon oxides are fed to a Sabatier reactor where they are converted to methane. The quantities of carbon dioxide, carbon monoxide, methane and water were measured under the different thermal degradation conditions. The overall carbon conversion efficiency and water recovery are discussed

Hintze, Paul E.↗
NASA NTRS2020

Air Quality Monitoring Case Study Using Mobile Low-cost Sensors Mounted on Trash-Trucks: Methods Development and Lessons Learned

Air quality monitoring (AQM) is crucial for cities to develop management plans supporting population health. However, there is a dearth of measurements due to the high cost of standard reference instruments. Mobile AQM using low-cost sensors deployed on routine fleets of vehicles can enable the continuous detection of fine-scale pollutant variations in cities at a lower cost. New methods need to be developed to interpret these measurements. This paper presents three such methods. First, we propose a technique to identify aerosol hotspots. Second, we employ techniques published previously to assess the generalizable map of fine and coarse particle number concentrations, to understand qualitatively the contribution of local and regional sources across the region sampled. By using the raw number concentration of differently sized particles from the Optical Particle Counters (OPCs) instead of the noisier mass concentrations, we obtain more robust results. Third, in order to evaluate source signatures in cities, we propose another technique, in which we cluster the entire range of aerosol size-distribution measurements acquired. The properties of each cluster provide insight into the aerosol source characteristics in the sampling environment. We test these methods using a dataset we collected by mounting OPCs on two trash-trucks in Cambridge, Massachusetts.

Drive-by sensing↗
NASA NTRS2020

Air Quality Monitoring Case Study Using Mobile Low-cost Sensors mounted on Trash-Trucks: Methods Development and Lessons Learned

Air quality monitoring (AQM) is crucial for cities to develop management plans supporting population health. However, there is a dearth of measurements due to the high cost of standard reference instruments. Mobile AQM using low-cost sensors deployed on routine fleets of vehicles can enable the continuous detection of fine-scale pollutant variations in cities at a lower cost. New methods need to be developed to interpret these measurements. This paper presents three such methods. First, we propose a technique to identify aerosol hotspots. Second, we employ techniques published previously to assess the generalizable map of fine and coarse particle number concentrations, to understand qualitatively the contribution of local and regional sources across the region sampled. By using the raw number concentration of differently sized particles from the Optical Particle Counters (OPCs) instead of the noisier mass concentrations, we obtain more robust results. Third, in order to evaluate source signatures in cities, we propose another technique, in which we cluster the entire range of aerosol size-distribution measurements acquired. The properties of each cluster provide insight into the aerosol source characteristics in the sampling environment. We test these methods using a dataset we collected by mounting OPCs on two trash-trucks in Cambridge, Massachusetts.

Drive-by sensing↗
NASA NTRS2021

Plasma Assisted Trash Conversion with CO2 Carrier Gas

A sub-atmospheric plasma solid-to-gas conversion system operating under 500 W was tested to be viable for waste conversion to a gaseous state without the use of a feedstock gas as shown in previous plasma torch works. This manuscript lays the groundwork into the feasibility of low-pressure solid-to-gas conversion, reaction chemistry of the by-product gases, and power consumption. The results have shown the possibility of gasification at reduced pressures without the consumable use of a feedstock carrier gas in previous studies. Thus far, the percent gasification averaged around 36% in pre-pellet trials, with the system being far from optimized. The products include H2, CO2, CO, C2H4, and C2H6. Hydrogen production was higher as expected in a CO2-like environment once the gasification process begins. The energy required to generate the plasma was on the order of that previously reported at atmospheric pressures. The ability to eliminate the need for any consumables that were required in previous iterations greatly improves the cost and operational logistics of plasma gasification equipment. Although further development of the system is needed for increased gasification percentages, elimination of useable commodities greatly favors such a system for trash management beyond low Earth orbit.

Malay Shah↗
DOE OSTI2023

Treasuring trash: Pt/SrTiO 3 catalysts process plastic waste into high-value materials

Single-use plastics are ubiquitous throughout modern society because they have properties that make them desirable in a wide variety of applications, including low cost of production, high thermal and chemical stability, and tunable mechanical properties. Several of the recycling methods currently used to process single-use plastic waste, such as mechanical recycling and pyrolysis, do not selectively process plastic materials into uniform products, as would be advantageous for repurposing these materials in pursuit of a circular economy. Catalytic hydrogenolysis, whereby C–C bonds in polymers are broken over a supported catalyst in the presence of H 2 , is a promising approach to converting plastics into value-added products that can be sold commercially without further purification. Here, in this account, we present some recent advances in polyolefin hydrogenolysis, with a focus on Pt nanoparticles on SrTiO 3 nanocuboid supports (Pt/STO). Current developments in this field, general challenges, and future directions are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Gene commander in the trash heap: Transcriptional regulation and ubiquitination modification mediated by RNF6 in carcinogenesis

Highlights: • Reveal the dysregulation of RNF6 in cancer. • Describe the molecular function of RNF6. • Summarize the molecular mechanism mediated by RNF6. RING finger protein 6 (RNF6), a RING finger protein, has been identified as a potential tumor promoter in several cancers. However, the exact mechanism of RNF6 in cancer remains elusive. As in various diseases, RNF6 may be involved in regulating cell growth, cell proliferation, invasion, cell cycle progression, apoptosis and cell adhesion through E3 ligase-mediated ubiquitination. Thus, the research on RNF6 is mainly focused on the ubiquitination of RNF6 in recent years. This article summarizes the role of RNF6 ubiquitination in various physiological and pathological mechanisms, such as Akt/mTOR signaling pathway, Wnt/β-catenin pathway, RNF6/ERα/Bcl-xL axis, and provides knowledge and understanding for the treatment of diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

What's the big deal with TA-55's trash?

There's a beast of hazardous waste, and we're learning how to tame it. Plutonium and production activities are ongoing at TA-55, which means the beast of hazardous waste is always looming around the corner. The Laboratory must dispose of this delicate type of waste properly and swiftly. Learning from previous snags and pitfalls in an incredibly complex process, TA-55 leadership and staff have worked together to greatly improve and streamline waste processes. The result: As of the last week of fiscal year 2020, 42 shipments containing 1,275 containers of transuranic (TRU) waste were sent to the Waste Isolation Pilot Plant (WIPP) in southern New Mexico, the nation’s only repository for defense-generated TRU waste. In FY 2019, we shipped less than half that amount.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Trash to Treasure: Waste Carbon into Construction Materials

Mineralization of industrial waste and earth-abundant CO2 into value-added products is a powerful method of utilizing domestic resources to produce value from waste. Carbonate minerals formed from Ca and Mg rich waste streams are key constituents in cement and concrete, which are in demand at the gigaton-scale every year. While thermodynamically favorable, CO2 mineralization is hindered by slow kinetics, and traditional thermochemical routes are too expensive to scale. Here, we demonstrate the advantages of an electrochemical method of waste valorization, which eliminates this limitation and improves kinetics. We highlight this method's ability to initiate crystallization under favorable local conditions, producing carbonates from mining waste at mildly acidic pH. We highlight the effects of key constituents in mining waste on the mineralization process.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1977

Manual trash compactor

Device eliminates need for individual refuse bags and disposal containers and may prove less expensive to manufacture and use than powered compactors. Instrument has compressive force of 2,000 pounds.

Stevenson, G. E.↗
NASA NTRS1978

Trash Compactor

The electrically heated ski goggles shown incorporate technology similar to that once used in Apollo astronauts' helmet visors, and for the same reason-providing fog-free sight in an activity that demands total vision. Defogging is accomplished by applying heat to prevent moisture condensation. Electric heat is supplied by a small battery built into the h goggles' headband. Heat is spread across the lenses by means of an invisible coating of electrically conductive metallic film. The goggles were introduced to the market last fall. They were designed by Sierracin Corporation, Sylmar, California, specialists in the field of heated transparent materials. The company produces heated windshields for military planes and for such civil aircraft as the Boeing 747, McDonnell Douglas DC-10 and Lockheed L-1011 TriStar.

Source record↗