Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “third harmonic generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Lidar detection of metallic species at the mesopause level

The measurement alkali species present in the atomic form at the mesopause level has been performed by lidar for more than ten years. Atomic and ionic calcium density profiles are obtained for 3 years by the same technique in the visible range, at 423 nm for atomic calcium, and 393 nm for ionic calcium Ca(+). The experimental set-up and the preliminary results have been presented elsewhere. The 423 nm wavelength is directly obtained by the emission of a dye laser pumped by the third harmonic of a Nd-YAG laser. For the generation of the 393 nm wavelength, frequency mixing was used: the emission at 624 nm of a dye laser pumped by the 2nd harmonic of a Nd-Yag laser is mixed with the fundamental infrared emission (remaining after frequency doubling), in a non-linear KDP crystal, which gives the 393 nm emission. The behavior of the two atomic species, calcium and sodium, which are in the same altitude range are compared. For 45% of the observations, no ionic calcium was detected: the ionic calcium abundance was thus below the detection threshold. Contrasting with the density profiles of the atomic species, sodium and calcium, the ionic calcium profile present important variations on small time scales. The main characteristics of theatomic and ionic calcium behaviors that can be deduced from the measurements made are given.

Granier, C.↗
DOE OSTI2020

High-Efficiency Inductive Output Tubes Using a Third Harmonic Drive on the Grid

In this article, we discuss the use of a third harmonic component to the drive voltage on the grid of an inductive output tube (IOT). High-efficiency IOTs are typically characterized by efficiencies up to 70%–75%. However, the achievement of efficiencies greater than 80% would substantially reduce the operating costs of next-generation accelerators. In order to achieve this goal, we consider the addition of a third harmonic component to the drive signal on the grid of an IOT. The use of a third harmonic drive component in IOT guns has been considered in order to apply such a gun as the injector of radio frequency linear accelerators (RF linacs). Furthermore, we consider that the IOT will be used to provide the rf power to drive RF linacs and apply the third harmonic with the intention of increasing the efficiency of the RF output of the IOT. We consider a model IOT with a 700-MHz resonant cavity and using an annular beam with a voltage of 30 kV, an average current of 6.67 A yielding a perveance of about 1.3 μP. We simulate this IOT using the NEMESIS simulation code which has been successfully validated by comparison with the K5H90W-2 IOT developed by Communications and Power Industries. It is found that the effect of the third harmonic on the efficiency is greatest when the phase of the third harmonic is shifted by radians with respect to the fundamental drive signal and with third harmonic powers greater than about 50% that of the fundamental drive power. For the present example, we show that efficiencies approaching 86% are possible by this means.

43 PARTICLE ACCELERATORS↗
NASA NTRS1995

Fundamental and subharmonic excitation for an oscillator with several tunneling diodes in series

Connecting several tunneling diodes in series shows promise as a method for increasing the output power of these devices as millimeter-wave oscillators. However, due to the negative differential resistance (NDR) region in the dc I-V curve of a single tunneling diode, a circuit using several devices connected in series, and biased simultaneously in the NDR region, is dc unstable. Because of this instability, an oscillator with several tunneling diodes in series has a demanding excitation condition. Excitation using an externally applied RF signal is one approach to solving this problem. This is experimentally demonstrated using an RF source, both with frequency close to as well as with frequency considerably lower than the oscillation frequency. Excitation by an RF (radio frequency) source with a frequency as low as one sixth of the oscillation frequency was demonstrated in a proof-of-principle experiment at 2 GHz, for an oscillator with two tunnel diodes connected in series. Strong harmonics of the oscillation signal were generated as a result of the highly nonlinear dc I-V curve of the tunnel diode and a large signal oscillator design. Third harmonic output power comparable to that of the fundamental was observed in one oscillator circuit. If submillimeter wave resonant-tunneling diodes (RTD's) are used instead of tunnel diodes, this harmonic output may be useful for generating signals at frequencies well into the terahertz range.

SUBHARMONIC EXCITATION↗
NASA NTRS1993

Intense backward Raman lasers in CH4 and H2

The conversion efficiency of the first Stokes radiation generated by backward stimulated Raman scattering is measured in CH4 and H2 that are pumped by a third harmonic of a Nd:YAG laser in the 12-55-mJ energy range and in the 0.86-6.00-MPa pressure range. Our experimental results show that CH4 is a better Raman medium than H2 at moderate pressures (a few megapascals) to efficiently generate backward Raman lines.

Sentrayan, Karuppasamy↗
NASA NTRS2003

Gust Acoustic Response of a Single Airfoil Using the Space-Time CE/SE Method

A 2D parallel Euler code based on the space-time conservation element and solution element (CE/SE) method is validated by solving the benchmark problem I in Category 3 of the Third CAA Workshop. This problem concerns the acoustic field generated by the interaction of a convected harmonic vortical gust with a single airfoil. Three gust frequencies, two gust configurations, and three airfoil geometries are considered. Numerical results at both near and far fields are presented and compared with the analytical solutions, a frequency-domain solver GUST3D solutions, and a time-domain high-order Discontinuous Spectral Element Method (DSEM) solutions. It is shown that the CE/SE solutions agree well with the GUST3D solution for the lowest frequency, while there are discrepancies between CE/SE and GUST3D solutions for higher frequencies. However, the CE/SE solution is in good agreement with the DSEM solution for these higher frequencies. It demonstrates that the CE/SE method can produce accurate results of CAA problems involving complex geometries by using unstructured meshes.

Scott, James↗
DOE OSTI2020

Quantum interference between the optical Stark effect and resonant harmonic generation in WS 2

An applied field can modulate optical signals by resonance shifting via the Stark effect. The optical Stark effect uses ultrafast light in the transparency region of a material to shift resonances with speeds limited by the pulse duration or system coherence. In this Rapid Communication, we investigate the optical Stark effect in resonant optical harmonic generation using the A exciton transition of WS 2 . Multidimensional pump-harmonic-probe measurements, in which the probe is second- or third-harmonic emission, reveal not only large Stark shifts that are commensurate with the large optical susceptibilities common to WS 2 excitons, but also behaviors more complex than simple optical Stark effect treatments predict. We show how another manifestation of the Stark effect, brought forth by coherent photon exchange between the pump and harmonic generation fundamental fields, can strongly enhance or suppress harmonic generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1988

Sources and levels of background noise in the NASA Ames 40- by 80-foot wind tunnel

Background noise levels are measured in the NASA Ames Research Center 40- by 80-Foot Wind Tunnel following installation of a sound-absorbent lining on the test-section walls. Results show that the fan-drive noise dominated the empty test-section background noise at airspeeds below 120 knots. Above 120 knots, the test-section broadband background noise was dominated by wind-induced dipole noise (except at lower harmonics of fan blade-passage tones) most likely generated at the microphone or microphone support strut. Third-octave band and narrow-band spectra are presented for several fan operating conditions and test-section airspeeds. The background noise levels can be reduced by making improvements to the microphone wind screen or support strut. Empirical equations are presented relating variations of fan noise with fan speed or blade-pitch angle. An empirical expression for typical fan noise spectra is also presented. Fan motor electric power consumption is related to the noise generation. Preliminary measurements of sound absorption by the test-section lining indicate that the 152 mm thick lining will adequately absorb test-section model noise at frequencies above 300 Hz.

Soderman, Paul T.↗
DOE OSTI2025

High efficiency RF sources developments

Calabazas Creek Research, Inc. (CCR) and its collaborators are developing high efficiency RF sources operating from a few hundred MHz to C-Band and power levels from tens to hundreds of kilowatts with the goal of providing MW-relevant sources. The efficiencies approach or exceed 80% with projected costs as low as $0.50/ Watt. Sources under development include magnetrons with phase and amplitude control, single and multi-beam klystrons, multi-beam power grid tubes, and multiple beam IOTs. A magnetron system achieved more than 80% efficiency with fast amplitude control using modulation of the phase locking signal. This would be a low cost, high efficiency RF source for superconducting accelerators. An L-Band, single beam klystron was built with simulated efficiency of 80%. The klystron has yet to be tested to confirm the simulation results. CCR is currently developing a multi-beam klystron to produce more than 200 kW CW at 80% efficiency. Also in development is a multiple beam triode to produce 200 kW CW from 300 MHz to approximately 1 GHz. Not only does the simulated efficiency exceed 75%, but it would be the lowest cost RF source in this frequency range. Finally, CCR recently concluded research for a multiple beam IOT at 700 MHz using third harmonic drive to boost efficiency toward 85%. Successful development and transition to production of these sources will significantly alter the cost/performance landscape for RF power generation.

43 PARTICLE ACCELERATORS↗
NASA NTRS1995

Integrated back to back barrier-N-N(+) varactor diode tripler using a split-waveguide block

The back-to-back barrier-N-N(+) (bbBNN) varactor is a nonlinear device being developed for frequency multiplier applications above 100 GHz. Its symmetrical C-V characteristic, low series resistance, freedom from external bias and suitability to planarization make it an ideal choice for high frequency, low power, odd harmonic generation. In this paper, the performance of a 220-GHz waveguide tripler using, for the first time, a planar GaAs bbBNN device integrated on a quartz microstrip circuit is presented. A new split-waveguide block design has been employed to provide the proper embedding impedances to the device at the input and third harmonic output frequencies. A flange-to-flange tripling efficiency of 7% has been obtained at 220 GHz with an output power in excess of 700 mu W. This is believed to be the highest conversion efficiency yet reported for a tripler with an integrated device at this frequency. Theoretical calculations indicate that substantial improvement is possible with modest changes to the device and circuit parameters.

QUARTZ MICROSTRIP CIRCUITS↗
DOE OSTI2020

Theoretical study of various nonlinear phenomena in plasma systems and scaling of magneto-inertial-fusion targets

Plasma physics is an exciting field of study with a wide variety of nonlinear processes that come into play. Examples of such processes include the interaction of small-scale turbulence with large-scale plasma structures and the nonlinear saturation of plasma instabilities, for example those of magneto-hydrodynamical nature. During this Truman LDRD project, I studied a collection of nonlinear problems that are of interest to the field of plasma physics. This LDRD report summarizes four main research accomplishments. First, a new statistical model for describing inhomogeneous drift-wave turbulence inter- acting with zonal flows was developed. This new model includes the effects of nonlinear wave-wave collisions, which are expected to change the spectrum of the underlying DW turbulence and therefore the generation of zonal flows. Second, a new mathematical formalism was proposed to systematically apply the non- linear WKB approximation to general field theories, including those often used in fluid dynamics. This formalism represents an interesting tool for studying physical systems that show an explicit scale separation. Third, a weakly nonlinear model was developed to describe the magneto-Rayleigh-Taylor instability. This instability is of paramount importance to understand as it can reduce the performance of magnetic-inertial-fusion (MIF) platforms. The developed models captures the effects of harmonic generation and saturation of the linear growth of the instability. Finally, a framework was proposed for scaling magneto-inertial fusion (MIF) targets to larger pulsed-power drivers. From this framework, a set of scaling rules were derived that conserve the physical regimes of MIF systems when scaling up in peak current. By doing so, deleterious nonlinear processes that affect MIF performance may be kept at bay.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1979

Dynamic sea surface topography from GEOS-3 altimetry - Determination of some dominant parameters

The second, third and fourth degree zonal harmonics of the quasi-stationary dynamic sea surface topography can be recovered from the GEOS-3 altimetry despite the adverse levels of noise indicated by the crossover discrepancies generated from the best orbits available at the end of 1977 and the GEOS-3 altimetry. Techniques for modelling the global sea surface topography are discussed along with methods for signal recovery in the presence of significant levels of noise. The analysis also provides a means of defining the geocentricity of the system of reference used in preparing the GEOS-3 ephemeris.

Mather, R. S.↗
DOE OSTI2020

Primary yields of protons measured using CR-39 in laser-induced deuteron–deuteron fusion reactions

The deuteron and deuteron (DD) fusion reactions is the most crucial reaction in the nuclear astrophysics and inertial confinement fusion, which is responsible for synthesizing chemical elements, and for powering the stellar evolution. The plasma environment generated by the high-intensity laser used in a DD fusion reaction is similar to the early stage of the Big Bang. Therefore, it is important to study laser-induced DD fusion reactions. Recently, we experimentally investigated such reactions using eight laser beams with the third harmonic impact on a deuterated polyethylene target at the ShenGuang-II Upgrade facility. In this work, we focused on the application of range-filter spectrometers assembled from a 70 μm aluminum filter and two CR-39 nuclear track detectors to measure the yields of primary DD protons. Based on the track diameter calibration results of 3 MeV protons used to diagnose the tracks on the range- filter spectrometers, we measured a primary DD proton yield of approximately (8:52 ± 1:7) × 10 6 , consistent with the yields from similar laser facilities worldwide, indicating that range-filter spectrometry is an effective way to measure primary DD protons. Furthermore, using other accurate detectors may help to measure the rare events of D 3 He protons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1999

Ultrasonic Nondestructive Characterization of Adhesive Bonds

Adhesives and adhesive joints are widely used in various industrial applications to reduce weight and costs, and to increase reliability. For example, advances in aerospace technology have been made possible, in part, through the use of lightweight materials and weight-saving structural designs. Joints, in particular, have been and continue to be areas in which weight can be trimmed from an airframe through the use of novel attachment techniques. In order to save weight over traditional riveted designs, to avoid the introduction of stress concentrations associated with rivet holes, and to take full advantage of advanced composite materials, engineers and designers have been specifying an ever-increasing number of adhesively bonded joints for use on airframes. Nondestructive characterization for quality control and remaining life prediction has been a key enabling technology for the effective use of adhesive joints. Conventional linear ultrasonic techniques generally can only detect flaws (delamination, cracks, voids, etc) in the joint assembly. However, more important to structural reliability is the bond strength. Although strength, in principle, cannot be measured nondestructively, a slight change in material nonlinearity may indicate the onset of failure. Furthermore, microstructural variations due to aging or under-curing may also cause changes in the third order elastic constants, which are related to the ultrasonic nonlinear parameter of the polymer adhesive. It is therefore reasonable to anticipate a correlation between changes in the ultrasonic nonlinear acoustic parameter and the remaining bond strength. It has been observed that higher harmonics of the fundamental frequency are generated when an ultrasonic wave passes through a nonlinear material. It seems that such nonlinearity can be effectively used to characterize bond strength. Several theories have been developed to model this nonlinear effect. Based on a microscopic description of the nonlinear interface binding force, a quantitative method was presented. Recently, a comparison between the experimental and simulated results based on a similar theoretical model was presented. A through-transmission setup for water immersion mode-converted shear waves was used to analyze the ultrasonic nonlinear parameter of an adhesive bond. In addition, ultrasonic guided waves have been used to analyze adhesive or diffusion bonded joints. In this paper, the ultrasonic nonlinear parameter is used to characterize the curing state of a polymer/aluminum adhesive joint. Ultrasonic through-transmission tests were conducted on samples cured under various conditions. The magnitude of the second order harmonic was measured and the corresponding ultrasonic nonlinear parameter was evaluated. A fairly good correlation between the curing condition and the nonlinear parameter is observed. The results show that the nonlinear parameter might be used as a good indicator of the cure state for adhesive joints.

Qu, Jianmin↗
NASA NTRS1992

The Third International Symposium on Space Terahertz Technology: Symposium proceedings

Papers from the symposium are presented that are relevant to the generation, detection, and use of the terahertz spectral region for space astronomy and remote sensing of the Earth's upper atmosphere. The program included thirteen sessions covering a wide variety of topics including solid-state oscillators, power-combining techniques, mixers, harmonic multipliers, antennas and antenna arrays, submillimeter receivers, and measurement techniques.

Source record↗
DOE OSTI2024

Reverse Polarizability of Rare Earth Ions (La 3+ , Gd 3+ , Lu 3+ , Y 3+ ) in Tellurite Glasses and Glass Ceramics for Optical Limiting

All-optical modulation using inherent third-order optical nonlinearity of a medium has garnered considerable interest in photonics and optoelectronics. Herein, nonlinear optical (NLO) properties of tellurite glasses and glass ceramics (GCs) containing four different rare earths (RE = La, Gd, Lu, and Y) have been deliberated in near-infrared regions under an ultrafast regime. The La-based glass exhibits ~10 times higher nonlinear refraction (n 2 ) and absorption (α 2 ) than reported NLO materials. The NLO susceptibility [χ (3) ] trend in the studied glasses is La > Gd > Lu > Y, matching with RE 3+ polarizability. Furthermore, Ln 2 Te 6 O 15 nanocrystallite-embedded transparent GCs exhibit a larger NLO coefficient due to the enhanced local field from oxygen vacancies in crystallites. Interestingly, the trend of χ (3) in GCs follows the sequence of Y > Lu > Gd > La, precisely opposite to the glasses. This observation challenges the general polarizability approach of RE 3+ ions, emphasizing that quadratic hyperpolarizability of RE 3+ is pivotal for NLO properties of GCs. Among the studied matrices, Y-containing GCs showed the lowest optical limiting (OL) threshold (5.4 mJ/cm 2 at 800 nm), much lower than those of the reported NLO materials, suggesting its potential as a femtosecond NIR-laser safety material. A combination of large α 2 and n 2 from the studied matrices indicates their advantage for harmonic generation, potentially aiding in the design of ultrafast signal processing devices.

36 MATERIALS SCIENCE↗
NASA NTRS2016

Improving Power Density of Free-Piston Stirling Engines

Analyses and experiments demonstrate the potential benefits of optimizing piston and displacer motion in a free piston Stirling Engine. Isothermal analysis shows the theoretical limits of power density improvement due to ideal motion in ideal Stirling engines. More realistic models based on nodal analysis show that ideal piston and displacer waveforms are not optimal, often producing less power than engines that use sinusoidal piston and displacer motion. Constrained optimization using nodal analysis predicts that Stirling engine power density can be increased by as much as 58 using optimized higher harmonic piston and displacer motion. An experiment is conducted in which an engine designed for sinusoidal motion is forced to operate with both second and third harmonics, resulting in a maximum piston power increase of 14. Analytical predictions are compared to experimental data showing close agreement with indirect thermodynamic power calculations, but poor agreement with direct electrical power measurements.

space technology↗
NASA NTRS1976

Optimal perturbation models for averaged orbit generation

Averaging techniques applied to the variation of parameters (VOP) formulation of the equations of motion are being investigated as methods for long-term prediction of artificial satellite orbits. Analytically averaged equations were compared with numerically averaged equations with respect to accuracy and efficiency for computation of zonal and nonresonant third-body perturbations. Numerically averaged equations were also evaluated for computation of long-period effects from resonant third-body, tesseral harmonic, and atmospheric drag perturbations. Guidelines will be presented for application of averaged VOP equations to a broad class of orbits.

Long, A. C.↗