Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Effect of deoxygenation and prestressing on hydrocarbon fuel thermal stability

A jet fuel thermal oxidation tester was used to study the effect of deoxygenation and deoxygenated prestressing on deposit formation when hydrocarbon fuels are thermally stressed. Four pure hydrocarbons (n-decane, cyclohexane, benzene and 1-hexene) and two mixtures (10 percent tetralin in n-dodecane and commercial Jet A) were used at temperatures of 250 C to 400 C. Deoxygenation decreased deposit formation for cycloheaxane but increased it for benzene. Deoxygenation decreased deposit formation for the two fuel mixtures at 250 C but had no effect at 350 C. Deoxygenated prestressing either increased or decreased deposit formation depending on the fuel used and the temperature.

Bittker, D. A.↗
NASA NTRS1966

Substituted silane-diol polymers have improved thermal stability

Organosilicon polymers were synthesized to produce improved physical and chemical properties, including high thermal stability. Of the polymers produced, poly/4, 4 prime-bisoxybi- phenylene/diphenylsilane, formed from bis/anilino/diphenylsilane and p, p prime-biphenol, was found to have the most desirable properties.

Byrd, J. D.↗
NASA NTRS1983

Synthesis and thermal stability of carborane-containing phosphazenes

Carborane-substituted polyphosphazenes were prepared by the thermal polymerization of phenyl-carboranyl pentachlorocylotriphosphazene. Successive isothermal vacuum pyrolyses were conducted on the polymer and examined for structural changes by infrared spectroscopy. The degradation products were ascertained by gas chromatography-mass spectrometric analysis. It was found that the presence of the carborane group improves the thermal stability of the polymer by retarding the ring-chain equilibrium processes of decomposition. Previously announced in STAR as A83-21034

Fewell, L. L.↗
NASA NTRS2011

Thermally Stabilized Transmit/Receive Modules

RF-hybrid technologies enable smaller packaging and mass reduction in radar instruments, especially for subsystems with dense electronics, such as electronically steered arrays. We are designing thermally stabilized RF-hybrid T/R modules using new materials for improved thermal performance of electronics. We are combining advanced substrate and housing materials with a thermal reservoir material, and develop new packaging techniques to significantly improve thermal-cycling reliability and performance stability over temperature.

thermal cycling stress↗
NASA NTRS1994

Effect of the Thermal Stability and Reactivity of Fullerenes on Ion Engine Propellant Applications

Because vapor phase fullerene molecules collide with high temperature surfaces at both the cathode in DC discharges and at the walls of vapor sources, knowledge of the thermal stability and material compatibility of fullerenes is important for ion thruster applications. Here, we present a study of the high temperature behavior of fullerenes. We find that when C 60 and C 7O are maintained at temperatures above 1073 K, or are wxposed to hot metal surfaces, significant degradation occurs. We find an activation energy of 261.5 kJ/mol for this process. At temperatures below 873 K, no breakdown of fullerenes can be detected, even after heating for 6 hours. The effect of these findings on C 60 ion thruster design is discussed. Our present C 60 ion thruster experiment is also described.

fullerenes↗
NASA NTRS1987

Synthesis and characterization of processable polyimides with enhanced thermal stability

Many of the emerging applications of polymers on space vehicles require materials with outstanding thermal stability. These polymers must also be readily processable in order to facilitate their use. The syntheses and polymerization of a cardo dianhydride were investigated. This monomer was prepared via the reaction of N-methyl 4-nitrophthalimide with a cardo diol. Polyimides containing oxyalkylene linkages were studied. The effects of two additional structural modifications on the polymers' properties were investigated. The effects of carrying out the preparation of poly(amic acid)s under non-equilibrium conditions were examined. Approaches that were investigated included the in-situ neutralization of the generated amic acid and its in-situ esterification.

Harris, Frank W.↗
NASA NTRS1987

A numerical study of the nonlinear thermal stability of solar loops

A time-dependent numerical model is used to investigate the nonlinear thermal stability of static loops of various heights. Simulations show that the instability of a hot state with loop heights of less than about 1000 km is physically significant, with an initially hot atmosphere in low-lying compact loops evolving to an extended atmosphere with temperatures far below 100,000 K. Results also show that high-lying loops are stable to all reasonable perturbations, including those of large initial amplitude and long wavelength. The simulation results suggest that low-lying compact loops should not be common to the sun, and that cool loops with temperatures near 100,000 K must be formed in the cool state initially and cannot evolve from preexisiting loops.

Klimchuk, J. A.↗
NASA NTRS1987

A linear thermal stability analysis for the vertical structure of alpha model accretion disks

The linear equations that describe the thermal stability of the convective and radiative vertical structure of an alpha model accretion disk are derived. For a specific model chosen to be representative of a dwarf nova disk, it is found that the eigenfunction for the temperature shows large excursions in the zone of partial ionization, but that the eigenfunctions for the unstable fundamental mode perturbations of the vertical distance and flux are nearly constant over the vertical extent of the disk. The growth of any instability is thus nearly homologous and the stability criteria derived for vertically averaged structures represent an adequate approximation.

Saio, Hideyuki↗
NASA NTRS2003

Polymer/Silicate Nanocomposites Developed for Improved Strength and Thermal Stability

Over the past decade, polymer-silicate nanocomposites have been attracting considerable attention as a method of enhancing polymer properties. The nanometer dimensions of the dispersed silicate reinforcement can greatly improve the mechanical, thermal, and gas barrier properties of a polymer matrix. In a study at the NASA Glenn Research Center, the dispersion of small amounts (less than 5 wt%) of an organically modified layered silicate (OLS) into the polymer matrix of a carbon-fiber-reinforced composite has improved the thermal stability of the composite. The enhanced barrier properties of the polymer-clay hybrid are believed to slow the diffusion of oxygen into the bulk polymer, thereby slowing oxidative degradation of the polymer. Electron-backscattering images show cracking of a nanocomposite matrix composite in comparison to a neat resin matrix composite. The images show that dispersion of an OLS into the matrix resin reduces polymer oxidation during aging and reduces the amount of cracking in the matrix significantly. Improvements in composite flexural strength, flexural modulus, and interlaminar shear strength were also obtained with the addition of OLS. An increase of up to 15 percent in these mechanical properties was observed in composites tested at room temperature and 288 C. The best properties were seen with low silicate levels, 1 to 3 wt%, because of the better dispersion of the silicate in the polymer matrix.

Campbell, Sandi G.↗
NASA NTRS1987

The thermal stability of coronal loops by nonlinear diffusion asymptotics

A nonlinear reaction-diffusion equation and some additional constraints are derived which describe the time-dependent behavior of the temperature structure of the plasma in coronal loops. The equation is analyzed using nonlinear diffusion asymptotics, in particular singular perturbation techniques, and the results are interpreted in the context of the physical problem of the thermal stability and temporal behavior of the plasma. The results are consistent with the possibility of cyclic thermal behavior of the plasma, as suggested by Kuin and Martens (1982).

Pakkert, J. W.↗