Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal boundary conductance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ultimate Suppression of Thermal Transport in Amorphous Silicon Nitride by Phononic Nanostructure.

Engineering the thermal conductivity of amorphous materials is highly essential for the thermal management of future electronic devices. Here, we demonstrate the impact of ultrafine nanostructuring on the thermal conductivity reduction of amorphous silicon nitride (a-Si3N4) thin films, in which the thermal transport is inherently impeded by the atomic disorders. Ultrafine nanostructuring with feature sizes below 20 nm allows us to fully suppress contribution of the propagating vibrational modes (propagons), leaving only the diffusive vibrational modes (diffusons) to contribute to thermal transport in a-Si3N4. A combination of the phonon-gas kinetics model and the Allen-Feldmann theory reproduced the measured results without any fitting parameters. The thermal conductivity reduction was explained as extremely strong diffusive boundary scattering of both propagons and diffusIons. These findings give rise to substantial tunability of thermal conductivity of amorphous materials, which enables us to provide better thermal solutions in microelectronic devices.

Tambo, Naoki↗
NASA NTRS1994

Thermal analysis of a functionally graded material subject to a thermal gradient using the boundary element method

The boundary element method is utilized in this study to conduct thermal analysis of functionally graded composites, materials in which the internal microstructure or properties are explicitly tailored in order to obtain an optimal response, on the micromechanical (constituent) scale. A unique feature of the boundary element formulations used here is the use of circular shape functions to convert the two-dimensional integrations of the composite fibers to one dimensional integrations. Using the computer code BEST-CMS, the through the thickness temperature profiles are computed for a representative material with varying numbers of fibers and fiber spacing in the thickness direction. The computed temperature profiles are compared to those obtained using an alternate analytical theory which explicitly couples the heterogeneous microstructure to the global analysis. The boundary element results compared favorably to the analytical calculations, with discrepancies that are explainable based on the boundary element formulation. The results serve both to demonstrate the ability of the boundary element method to analyze these types of materials, and to verify the accuracy of the analytical theory.

Goldberg, Robert K.↗
NASA NTRS1993

Composite micromechanical modeling using the boundary element method

The use of the boundary element method for analyzing composite micromechanical behavior is demonstrated. Stress-strain, heat conduction, and thermal expansion analyses are conducted using the boundary element computer code BEST-CMS, and the results obtained are compared to experimental observations, analytical calculations, and finite element analyses. For each of the analysis types, the boundary element results agree reasonably well with the results from the other methodologies, with explainable discrepancies. Overall, the boundary element method shows promise in providing an alternative method to analyze composite micromechanical behavior.

Goldberg, Robert K.↗
DOE OSTI2020

Sweeping Jet Film Cooling at High Blowing Ratio on a Turbine Vane

Abstract Experimental and numerical investigations were performed to study the effects of high blowing ratios and high freestream turbulence on sweeping jet film cooling. Experiments were conducted on a nozzle guide vane suction surface in a low-speed linear cascade at a range of blowing ratios of 0.5–3.5 and freestream turbulence of 0.6% and 14.3%. Infrared thermography was used to estimate the adiabatic cooling effectiveness. Thermal field and boundary layer measurements were conducted at a cross-plane at x/D = 12 downstream of the hole exit. Results were compared with a baseline 777-shaped hole and showed that the sweeping jet hole has improved cooling effectiveness at high blowing ratios (M > 1). The thermal field data revealed that the coolant separates from the surface at high blowing ratios for the 777-shaped hole while the coolant remains attached for the sweeping jet hole. Boundary layer measurements further confirmed that due to the sweeping motion of the jet, the effective jet momentum of the sweeping jet hole remains much lower than that of a 777-shaped hole. Thus, the coolant remains closer to the wall even at high blowing ratios. Large Eddy simulations (LES) were performed for both the sweeping jet and 777-shaped hole to evaluate the interaction between the coolant jet and the freestream in the near hole regions. Results showed that 777-shaped hole has a strong jetting at high blowing ratio that originates inside the hole breakout edges thus causing the jet to blow-off from the surface. In contrast, the sweeping jet does not show this behavior due to its internal geometry and flapping motion of the jet.

Engineering↗
NASA NTRS1993

Does the thermal wind exist near the Earth's core boundary?

Temperature distribution in the Earth core determines many important processes such as the following: convective motion, magnetic field generation, matter exchange between the core and the mantle, and the thermal flux. This distribution depends on conditions in the core-mantle boundary and on the distribution of the thermal conductivity in the mantle. Seismic tomography shows that large horizontal temperature and compositional gradients exists at the core-mantle boundary. The simple assumption that these inhomogeneities are extended into the top of the core contradicts the common opinion that the horizontal temperature gradient (the thermal wind) wipes them out in a short time. However, this conclusion has been obtained without taking into account that the core volume is closed and the motion, if it is started, can lead to a small redistribution of composition that stops this motion.

Dolginov, A. Z.↗
DOE OSTI2026

Direct Simulations of H–He Mixtures at Planetary Interior Conditions: Demixing, Insulator–Metal Transition and Miscibility Boundaries

Accurate knowledge of the electrical and thermal conductivities and structural properties of hydrogen–helium mixtures under thermodynamic conditions within and beyond the immiscibility range is very important to predict the thermal evolution and internal structure of gas giant planets like Jupiter and Saturn. Here, we propose a novel method to determine the immiscibility boundary accurately without the need for free energy calculations, while providing consistent insights into structural and transport properties of mixtures. We show with direct large-scale ab initio simulations that the insulator–metal transition (IMT) of the hydrogen subsystem is strongly affected by an admixture with a small fraction of helium and occurs at temperatures significantly higher than those of pure hydrogen. At pressures below 150 GPa, the IMT boundary is not related anymore to the H 2 subsystem dissociation, the system remains insulating even after the full dissociation of H 2 molecules and its transition to an H–He mixture. The offset of the IMT in the H–He mixture relative to the dissociation region in the hydrogen subsystem and the significant reduction of static electrical and thermal conductivity by a factor between two and a few thousand relative to pure hydrogen found in mixtures have consequences for Jupiter and Saturn’s thermal evolution, internal structure, and dynamo action, affecting a large fraction of the interior of both planets.

Helium↗
NASA NTRS1977

Viking Mars hydrazine terminal descent engine thermal design considerations

A description is given of some of the more significant thermal design considerations employed in the development and qualification of the monopropellant hydrazine terminal descent engines on the Viking Mars lander spacecraft. The terminal descent engine operates in a blowdown and throttling mode, which results in an operating thrust range of 638 to 90 lbf. Martian entry thermal design boundary conditions are described, along with resulting radiative and conductive engine thermal isolation hardware. Test results are presented, showing engine thermal design performance as compared with specified requirements. General engine materials of construction are described, along with Hastelloy B shell structural characteristics, which were extended to 2000 F by test and are compared with limited existing MIL-HDBK-5 data. Subscale test results are presented, showing the maximum catalyst bed cylinder design temperature of 1970 F. Test results also are presented, showing local reactor internal convective heat-transfer coefficients. Such data are unique, since the engine employs a completely radial flow catalyst bed design. This design approach is the first of its kind in the monopropellant hydrazine gas generator field to be flight qualified.

Cunningham, C. R.↗
DOE OSTI2024

Nanoscale Imaging and Measurements of Grain Boundary Thermal Resistance in Ceramics with Scanning Thermal Wave Microscopy

Material thermal conductivity is a key factor in various applications, from thermal management to energy harvesting. With microstructure engineering being a widely used method for customizing material properties, including thermal properties, understanding and controlling the role of extended phonon-scattering defects, like grain boundaries, is crucial for efficient material design. However, systematic studies are still lacking primarily due to limited tools. In this study, we demonstrate an approach for measuring grain boundary thermal resistance by probing the propagation of thermal waves across grain boundaries with a temperature-sensitive scanning probe. The method, implemented with a spatial resolution of about 100 nm on finely grained Nb-substituted SrTiO 3 ceramics, achieves a detectability of about 2 × 10 –8 K m 2 W –1 , suitable for chalcogenide-based thermoelectrics. The measurements indicated that the thermal resistance of the majority of grain boundaries in the STiO 3 ceramics is below this value. While there are challenges in improving sensitivity, considering spatial resolution and the amount of material involved in the detection, the sensitivity of the scanning probe method is comparable to that of optical thermoreflectance techniques, and the method opens up an avenue to characterize thermal resistance at the level of single grain boundaries and domain walls in a spectrum of microstructured materials.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Process Modeling of Woven Textiles

Woven polymer matrix composites offer numerous advantages over traditional unidirectional laminates. Processing conditions affect residual stress that builds up during manufacturing. This work proposes the analysis of three curing parameters on the local residual stress distribution of a plain weave textile architecture, including chemical shrinkage, the temperature cool down, and the evolution of matrix properties as a function of curing. Virtual curing is applied to the inter-tow matrix material of the plain weave Repeating Unit Cell (RUC) modeled in TexGen. Curing is implemented through user-written subroutines within the commercial software suite Abaqus. Results from process modeling are compared with a linear-elastic thermal cool down in Abaqus. A boundary conditions study is also conducted to compare the residual stress build up predicted by Flat(FBCs) and Periodic Boundary Conditions (PBCs). Preliminary results indicate that a thermal cool down over-estimates the end-of-cure stresses in the matrix. Process modeling is conducted with and without chemical shrinkage, then compared with a thermal cool down. Results show that 11.32% of the final stress state is due to chemical shrinkage. Material property evolution during curing also has a non-negligible effect on the end stress.

woven composites↗
DOE OSTI2025

Boundary scattering in topological Kondo insulator SmB 6

We have studied the effects of phonon-boundary scattering on the thermal transport of topological Kondo insulator SmB6. The studies have been performed using the 3ω method across a temperature range 3–300 K. Our results indicate that the thermal conductivity of micro-sized SmB 6 is of an order of magnitude smaller than that of a bulk single crystal. Using the Callaway model, we analyzed the low-temperature lattice thermal conductivity of the microcrystal and demonstrated that phonon scattering at the sample boundaries is a major contributor to the thermal resistance in this topological material. Furthermore, our study reveals that the temperature dependence of the lattice thermal conductivity exhibits a double-peak structure, suggesting strong phonon–phonon or phonon–defect interactions in this material, characteristic of resonant scattering. Furthermore, these findings will help in a better understanding of thermal transport in advanced materials and devices at the micro scale.

Physics - Condensed matter physics↗
DOE OSTI2020

Understanding the thermally activated charge transport in NaPb m SbQ m+2 (Q = S, Se, Te) thermoelectrics: weak dielectric screening leads to grain boundary dominated charge carrier scattering

Many thermoelectric materials feature irregular electrical conductivity with thermally activated transport below ~600 K and metallic behavior at high temperatures, despite possessing degenerate carrier concentrations. The suppression of the electrical conductivity ultimately degrades the thermoelectric performance on the cold side and limits the device energy conversion efficiency. As such, establishing the origin of the low temperature scattering and developing strategies to mitigate its effect are paramount issues. To date, the correct microscopic description of the low temperature carrier scattering remains an open issue, and there is little work addressing why some thermoelectric materials are more susceptible to the deleterious behavior. Here, we use the promising thermoelectric alloys of PbQ and NaSbQ 2 (Q = S, Se, Te) as model systems to address these concerns. We directly show the thermally activated transport stems from the scattering of charge carriers by the grain boundaries (GBs), and that the expected metallic electrical conductivity is recovered by preparing large grained samples with reduced densities of GBs. We furthermore study the electrical properties NaPb m SbSe m+2 as a function of NaSbSe 2 fraction, as well as those of the chalcogenide analogues, PbTe–NaSbTe 2 and PbS–NaSbS 2 , and demonstrate that the strength of GB scattering can be understood by utilizing simple chemical principles. By considering the polarizability of the host atoms, we directly relate the magnitude of GB scattering to the relative degree of charge carrier screening in each material, and demonstrate that GB scattering is strongest in the ionic NaSbQ 2 -rich compounds and weakest in more polarizable PbQ-rich phases. We finally show how these chemical arguments elegantly explain the strong GB scattering in numerous other thermoelectric materials. By uniting the deleterious charge transport properties exhibited by many different compounds into a common picture, we discuss how our work gives design principles for proper microstructure engineering in emerging thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Heat transport and temperature boundary-layer profiles in closed turbulent Rayleigh–Bénard convection with slippery conducting surfaces

Here, we report direct numerical simulations (DNS) of the Nusselt number Nu , the vertical profiles of mean temperature Θ(z) and temperature variance Ω(z) across the thermal boundary layer (BL) in closed turbulent Rayleigh–Bénard convection (RBC) with slippery conducting surfaces ( z is the vertical distance from the bottom surface). The DNS study was conducted in three RBC samples: a three-dimensional cuboid with length L=H and width W=H/4 ( H is the sample height), and two-dimensional rectangles with aspect ratios Γ≡L/H=1 and 10. The slip length b for top and bottom plates varied from 0 to ∞ . The Rayleigh numbers Ra were in the range 10 6 $⩽$Ra$⩽$10 10 and the Prandtl number Pr was fixed at 4.3 . As b increases, the normalised Nu/Nu 0 ( Nu 0 is the global heat transport for b =0 ) from the three samples for different Ra and Γ can be well described by the same function Nu/Nu 0 = N 0 tanh( b /λ 0 )+1 , with N 0 =0.8±0.03 . Here λ 0 ≡ L /(2 Nu 0 ) is the thermal boundary layer thickness for b =0 . Considering the BL fluctuations for Pr >1, one can derive solutions of temperature profiles Θ(z) and Ω(z) near the thermal BL for b $⩾$ 0 . When b =0 , the solutions are equivalent to those reported by Shishkina et al. ( Phys. Rev. Lett. , vol. 114, 2015, 114302) and Wang et al. ( Phys. Rev. Fluids , vol. 1, 2016, 082301(R)), respectively, for no-slip plates. For b >0, the derived solutions are in excellent agreement with our DNS data for slippery plates.

42 ENGINEERING↗
NASA NTRS1974

Using the NASTRAN Thermal Analyzer to simulate a flight scientific instrument package

The NASTRAN Thermal Analyzer has proven to be a unique and useful tool for thermal analyses involving large and complex structures where small, thermally induced deformations are critical. Among its major advantages are direct grid point-to-grid point compatibility with large structural models; plots of the model that may be generated for both conduction and boundary elements; versatility of applying transient thermal loads especially to repeat orbital cycles; on-line printer plotting of temperatures and rate of temperature changes as a function of time; and direct matrix input to solve linear differential equations on-line. These features provide a flexibility far beyond that available in most finite-difference thermal analysis computer programs.

Lee, H.-P.↗
DOE OSTI2020

Vertical forces during VDEs in an ITER plasma and the role of halo currents

Vertical displacement events (VDEs) can occur in elongated tokamaks causing large currents to flow in the vessel and other adjacent metallic structures. To better understand the potential magnitude of the associated forces and the role of the so called halo currents'' on them, we have used the M3D-C1 code to simulate potential VDEs in ITER. We used actual values for the vessel resistivity and pre-quench temperatures and, unlike most of the previous studies, the halo region is naturally formed by triggering the thermal quench with an increase in the plasma thermal conductivity. We used the 2D non-linear version of the code and vary the post-thermal quench thermal conductivity profile as well as the boundary temperature in order to generate a wide range of possible cases that could occur in the experiment. We also show that, for a similar condition, increasing the halo current does not increase the total force on the wall since it is offset by a decrease in the toroidal contribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

The effect of coatings and liners on heat transfer in a dry shaft-bush tribosystem

The temperatures due to frictional heating within a solid lubricated or coated journal bearing were analyzed by using a finite element method. A solid model of the shaft-bush tribocontact was generated with an eight-node, three-dimensional, first-order isoparametric heat-transfer element and the Patran solid modeler software. The Patmar (Patran-Marc) translator was used to help develop the Marc-based finite element program for the system; this software was used on the Cray X-MP supercomputer to perform a finite element analysis of the contact. The analysis was performed for various liner materials, for thin, hard, wear-resistant coated bearings, and for different geometries and thermal cooling boundary conditions. The analyses indicated that thermal conductivity of the liner or coating material is the most vital thermal parameter that controls the interface temperature. In addition to design variations, the proximity of the cooling source to the heat-flux-generating interface is critically important to the temperature control in the system.

Ghosh, Mihir K.↗
NASA NTRS1973

Atmospheric Aerosol and Thermal Structure in the Boundary Layer Over the Los Angeles Basin

A field study using a mobile lidar was recently conducted in the L. A. Basin, California, to (1) examine the relationship between the vertical aerosol and the thermal structure, and (2) map the vertical aerosol structure in the atmospheric boundary layer over the basin. These data are needed for use in the development of a mixing-depth submodel required for photochemical air Quality simulation models. Toward these ends, a series of lidar aerosol measurements in conjunction with balloon and aircraft temperature soundings were taken at a site in El Monte, and in a mobile mode along a 90-mile freeway loop between El Monte, Santa Monica, and Long Beach. The lidar data are presented in the form of time-height and distance-height cross sections. The results indicate that, although aerosol concentrations are frequently present above the base of the marine inversion, these are generally in stratified layers in contrast to the more uniform nature of the lower convective layer, permitting the mixing depth to be distinguished on this basis. The lidar-derived mixing depths are well correlated (within 100 m) with daytime temperature inversions. Other significant features shown by the lidar data include large Basin-wide mixing-depth variations, waves with amplitudes of 200-300 m and wavelengths of 1000-1500 m on the lower aerosol layer, and apparent aerosol "chimneys" with overrunning in the vicinity of convergence zones.

Johnson, Warren B.↗