Nonmonotonicity in sensitivity test data
Frequency of reactions for sensitivity test data - structural mechanics
SENSITIVITY↗
SEARCH · Engineering Papers
Results for “testing data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Analyzing the Use of Gaseous Helium as a Pressurant with Cryogenic Propellants with Thermodynamic Venting System Modelling and Test Data
Cryogens are viable candidate propellants for NASA's Lunar and Mars exploration programs. To provide adequate mass flow to the system's engines and/or to prevent feed system cavitation, gaseous helium (GHe) is frequently considered as a pressurant. During low gravity operations, a Thermodynamic Venting System (TVS) is designed to maintain tank pressure during low gravity operations without propellant resettling. Therefore, a series of tests were conducted in the Multi-purpose Hydrogen Test Bed (MHTB) of Marshall Space Flight Center (MSFC) in order to evaluate the effects of GHe pressurant on pressure control performance of a TVS with liquid hydrogen (LH2) and nitrogen (LN2) as the test liquids. The TVS used in these test series consists of a recirculation pump, Joule-Thomson (J-T) expansion valve, and a parallel flow concentric tube heat exchanger combined with a longitudinal spray bar. Using a small amount of liquid extracted from the tank recirculation line, passing it through the J-T valve, and then through the heat exchanger, thermal energy is extracted from the bulk liquid and ullage thereby enabling pressure control. The LH2/GHe tests were performed at fill levels of 90%, 50%, and 25% and LN2/GHe tests were conducted at fill levels of 50% and 25%. Moreover, each test was conducted with a specified tank ullage pressure control band. A one-dimensional TVS performance program was used to analyze and correlate the test data. Predictions and comparisons with test data of ullage pressure and temperature and bulk liquid saturation pressure and temperature with test data are presented.
Hedayat, A.↗
Model reduction for flexible structures - Test data approach
A reduced model of a system is obtained by truncating part of its state variables. Hankel singular values and component costs determine which component is deleted or retained in the reduced model. In this paper Hankel singular values and component costs of a flexible structure are obtained from the resonance test data, rather than from the system matrices. Test data, besides system dynamics, include also actuators and sensors dynamics. For this reason, the reduced model obtained from test data can be far from the optimal one. In this paper the reconstruction of the flexible structure indices from the joint actuator-sensor-flexible structure indices is discussed.
Gawronski, Wodek↗
Computer program performs aerothermodynamic flight test data correlation
Computer program plots flight test data /stored on magnetic tape during the flight/ with comparative data from other tapes /design and post-flight predictions/. Information as to which measurements are on each tape, the order in which they appear, and the exact time span is supplied by the source of the data.
Schmus, F.↗
Low speed wind tunnel test of a propulsive wing/canard concept in the STOL configuration. Volume 2: Test data
A propulsive wind/canard model was tested at STOL operating conditions in the NASA Langley Research Center 4 x 7 meter wind tunnel. Longitudinal and lateral/directional aerodynamic characteristics were measured for various flap deflections, angles of attack and sideslip, and blowing coefficients. Testing was conducted for several model heights to determine ground proximity effects on the aerodynamic characteristics. Flow field surveys of local flow angles and velocities were performed behind both the canard and the wing. This is volume 2 of a 2 volume report. All of the test data in three appendices are presented. Appendix A presented tabulated six component force and moment data, Appendix B presents tabulated wing pressure coefficients, and Appendix C presents the flow field data.
Stewart, V. R.↗
Auburn Micrometeoroid Impact Test Data Analysis
This presentation provides an overview and summary of micrometeoroid impact testing performed by Auburn University and an analysis of the test results. The testing at Auburn utilized existing facilities at Auburn to generate hypervelocity impacts into multiple layers of thin Kapton films representative of the NASA concept for the NGST sunshield. The test data consists of impactor particle mass and velocity, and for each film layer, the number and size of holes generated by the initial impact and resulting impact debris. The analysis consists of combining the test data with existing impact effects models and the micrometeoroid environment at the L2 operating location of NGST to predict sunshield degradation.
Perrygo, Charles↗
JANNAF Rocket Engine Performance Test Data Acquisition and Interpretation Manual
Procedures recommended by the JANNAF Performance Standardization Working Group for acquisition and Interpretation of performance test data are presented. Included with the description of these procedures are recommended procedures covering the required measurements, associated instrumentation, calibration methods, and data uncertainties. In addition, criteria for the applicability of existing test data, the selection of test models, and analytical performance prediction improvement based on test results are outlined. Three sample cases using the recommended procedures are presented as an addendum under separate cover. Author
Evans, S. A.↗
Applicability of Aerospace Materials Ground Flammability Test Data to Spacecraft Environments Theory and Applied Technologies
This slide presentation reviews the use of ground test data in reference to flammability to spacecraft environments. It reviews the current approach to spacecraft fire safety, the challenges to fire safety that the Constellation program poses, the current trends in the evaluation of the Constellation materials flammability, and the correlation of test data from ground flammability tests with the spacecraft environment. Included is a proposal for testing and the design of experiments to test the flammability of materials under similar spacecraft conditions.
Hirsch, David↗
A generalized method for the identification of aircraft stability and control derivatives from flight test data.
This paper discusses the application of a generalized identification method for flight test data analysis. The method is based on the maximum likelihood (ML) criterion and includes output error and equation error methods as special cases. Both the linear and nonlinear models with and without process noise are considered. The flight test data from lateral maneuvers of HL-10 and M2/F3 lifting bodies are processed to determine the lateral stability and control derivatives, instrumentation accuracies and biases. A comparison is made between the results of the output error method and the generalized ML method for M2/F3 data containing gusts. It is shown that better fits to time histories are obtained by using the generalized ML method.
Mehra, R. K.↗
Expendable second stage reusable space shuttle booster. Volume 3: Wind tunnel test data
Wind tunnel tests to evaluate the flight characteristics of several expendable second stage/payload configurations on the reusable space shuttle booster are described. Tests were conducted at appropriate speeds, angle of attack, and Reynold's number ranges to evaluate the aerodynamic characteristics of the systems. Three specified payload shapes were tested. The subjects presented are: (1) nomenclature associated with the tests, (2) description of the wind tunnel models, and (3) discussion of aerodynamic characteristics derived from tests.
Source record↗
Radial SI latches vibration test data review
Dynamic testing of the Space Telescope Scientific Instrument Radial Latches was performed as specified by the designated test criteria. No structural failures were observed during the test. The alignment stability of the instrument simulator was within required tolerances after testing. Particulates were discovered around the latch bases, after testing, due to wearing at the B and C latch interface surfaces. This report covers criteria derivation, testing, and test results.
Harrison, P. M.↗
Waste water processing technology for Space Station Freedom - Comparative test data analysis
Comparative tests were conducted to choose the optimum technology for waste water processing on SSF. A thermoelectric integrated membrane evaporation (TIMES) subsystem and a vapor compression distillation subsystem (VCD) were built and tested to compare urine processing capability. Water quality, performance, and specific energy were compared for conceptual designs intended to function as part of the water recovery and management system of SSF. The VCD is considered the most mature and efficient technology and was selected to replace the TIMES as the baseline urine processor for SSF.
Miernik, Janie H.↗
A CFD Validation Study using Artemis 1 Orbital Slosh Test Data
Advancements in liquid propellant management science and technologies are key to increasing safety, decreasing cost, and increasing payload mass of NASA space missions. Liquid propellant usually comprises a large portion of the total mass of launch vehicles and spacecraft, so predicting and controlling the motion of it are important. Computational fluid dynamics (CFD) programs are critical to predicting slosh dynamics, but CFD programs require experimental validation with physically relevant test data before the results can be trusted. Low-gravity slosh test data is lacking, and most of what exists is inadequate for CFD validation. A potential slosh risk for Orion, and the lack of validated low-gravity slosh models, led to performing on-orbit slosh tests during the Artemis 1 mission to assess the impacts of slosh on the guidance, navigation, and control of Orion. This work details the validation of a coupled slosh-motion CFD model using the Orion orbital slosh test data set.
CFD↗
A CFD Validation Study Using Artemis 1 Orbital Slosh Test Data
Advancements in liquid propellant management science and technologies are key to increasing safety, decreasing cost, and increasing payload mass of NASA space missions. Liquid propellant usually comprises a large portion of the total mass of launch vehicles and spacecraft, so predicting and controlling the motion of it are important. Computational fluid dynamics (CFD) programs are critical to predicting slosh dynamics, but CFD programs require experimental validation with physically relevant test data before the results can be trusted. Low-gravity slosh test data is lacking, and most of what exists is inadequate for CFD validation. A potential slosh risk for Orion, and the lack of validated low-gravity slosh models, led to performing on-orbit slosh tests during the Artemis 1 mission to assess the impacts of slosh on the guidance, navigation, and control of Orion. This work details the validation of a coupled slosh-motion CFD model using the Orion orbital slosh test data set.
CFD↗
Use of system identification techniques for improving airframe finite element models using test data
A method for using system identification techniques to improve airframe finite element models using test data has been developed and demonstrated. The method uses linear sensitivity matrices to relate changes in selected physical parameters to changes in the total system matrices. The values for these physical parameters were determined using constrained optimization with singular value decomposition. The method was confirmed using both simple and complex finite element models for which pseudo-experimental data was synthesized directly from the finite element model. The method was then applied to a real airframe model which incorporated all of the complexities and details of a large finite element model and for which extensive test data was available. The method was shown to work, and the differences between the identified model and the measured results were considered satisfactory.
Hanagud, Sathya V.↗
Use of system identification techniques for improving airframe finite element models using test data
A method for using system identification techniques to improve airframe finite element models using test data was developed and demonstrated. The method uses linear sensitivity matrices to relate changes in selected physical parameters to changes in the total system matrices. The values for these physical parameters were determined using constrained optimization with singular value decomposition. The method was confirmed using both simple and complex finite element models for which pseudo-experimental data was synthesized directly from the finite element model. The method was then applied to a real airframe model which incorporated all of the complexities and details of a large finite element model and for which extensive test data was available. The method was shown to work, and the differences between the identified model and the measured results were considered satisfactory.
Hanagud, Sathya V.↗
Applying Motion Constraints Based on Test Data
MSC ADAMS is a simulation software that is used to analyze multibody dynamics. Using user subroutines, it is possible to apply motion constraints to the rigid bodies so that they match the motion profile collected from test data. This presentation describes the process of taking test data and passing it to ADAMS using user subroutines, and uses the Morpheus free-flight 4 test as an example of motion data used for this purpose. Morpheus is the name of a prototype lander vehicle built by NASA that serves as a test bed for various experimental technologies (see backup slides for details) MSC.ADAMS"TM" is used to play back telemetry data (vehicle orientation and position) from each test as the inputs to a 6-DoF general motion constraint (details in backup slides) The MSC.ADAMS"TM" playback simulations allow engineers to examine and analyze flight trajectory as well as observe vehicle motion from any angle and at any playback speed. This facilitates the development of robust and stable control algorithms, increasing reliability and reducing development costs of this developmental engine The simulation also incorporates a 3D model of the artificial hazard field, allowing engineers to visualize and measure performance of the developmental autonomous landing and hazard avoidance technology ADAMS is a multibody dynamics solver. It uses forces, constraints, and mass properties to numerically integrate equations of motion. The ADAMS solver will ask the motion subroutine for position, velocity, and acceleration values at various time steps. Those values must be continuous over the whole time domain. Each degree of freedom in the telemetry data can be examined separately; however, linear interpolation of the telemetry data is invalid, since there will be discontinuities in velocity and acceleration.
Burlone, Michael↗