Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “termination engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Chiral Topological Surface States on a Finite Square Photonic Crystal Bounded by Air

Chiral, topologically protected, photonic surface states can be found at the boundary between gyrotropic photonic crystals where a changing magnetic field induces different topology across the interface. Typically, photonic crystals with either a suitable band structure on both sides of the interface to provide a band gap and evanescent decay of the surface states away from the interface, or an outer layer with engineered material properties is required. In this paper, we show the emergence of topological, unidirectional surface states at the termination of finite gyrotropic photonic crystals with a simple square lattice and C 4 rotational symmetry bounded by a vacuum, eliminating the need for an outside layer to enable chiral surface modes. Here, we start from an infinite, time-reversal-symmetry-breaking photonic crystal with a band gap associated with bands with nonzero Chern numbers, different from all-zero Chern numbers in air. We then modify the photonic crystal to move this band gap below the light line, while maintaining the Chern-number discontinuities. Band-structure calculations for a supercell approximating a photonic crystal finite in the direction normal to the surface demonstrate the existence, dispersion, and chirality of the surface mode. Extensive direct scattering calculations for a point source and spatial Fourier analysis further reveal a unidirectional free-space topological surface state, which propagates counterclockwise around the surface of a finite photonic crystal, providing a nearly foolproof way to cross-check the surface-mode band structure unaffected by backscattering from local defects. Additionally, scattering simulations allow an independent characterization of the state dispersion and unveil the robustness of the topological plasmonic mode propagation around the 90° bends of the structure, being due to only radiation leakage. In contrast to buried topological surface states, the observed surface modes at the photonic crystal–air interface have the advantage of being accessible to the outside world, allowing one to take advantage of the defect-tolerant backscattering-free surface modes to engineer emission from photonic crystal surfaces into arbitrary free-space beam shapes and directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Photographic Mitigation Documentation Related to the Engine Assembly and Disassembly Facility, Area 25, Nevada National Security Site, Nye County, Nevada

This letter report provides documentation in partial fulfillment of the mitigation of adverse effects to the Engine Maintenance Assembly and Disassembly (E-MAD) facility, a major component of the Nuclear Rocket Development Station (NRDS) Historic District located in Area 25 of the Nevada National Security Site (NNSS). Construction of the E-MAD facility began in 1962 for the purpose of disassembling and maintaining nuclear-powered rocket engines. Once the building was complete in 1967, the E-MAD facility remained in continuous operation until the nuclear rocket program was terminated in 1973. The mothballed facility was repurposed in 1977 for spent nuclear fuel handling and packaging activities. By the mid-1980s, all activities at the E-MAD facility had ceased (Reno et al. 2019). This submission is intended to comply with Stipulation III.D.1 of the Memorandum of Agreement DE-GM58-20NA25534 between the U.S. Department of Energy and the Nevada State Historic Preservation Officer Regarding Corrective Action Activities and Demolition of the Engine Maintenance Assembly and Disassembly Facility and the Test Cell C Historic District, Major Components of the Nuclear Rocket Development Station Historic District Located in Area 25 at the Nevada National Security Site Nye County (hereafter referred to as the MOA). Stipulation III.D.1 states the U.S. Department of Energy (DOE) will submit the existing supplementary collection of the large-format, black-and-white photographic prints taken during the 1996 Historic American Engineering Record (HAER) documentation of the E-MAD facility to the Nuclear Testing Archive (NTA), located on the second floor of the Rogers Building at Desert Research Institute (DRI) in Las Vegas, Nevada.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Engineering Active Surface Oxygen Sites of Cubic Perovskite Cobalt Oxides toward Catalytic Oxidation Reactions

Unraveling the role of surface oxygen sites in transition metal oxides during catalytic reactions has always been the focus of environmental and energy chemistry research. For this work, active surface oxygen sites of cubic perovskite cobalt oxide were engineered to comprehend their crucial role and catalytic mechanism at the molecular level. By removing those inert Sr/La–O termination layers, active oxygen sites were exposed on the Co terminated surface of Sr 0.6 La 0.4 CoO 3–δ that furnished the dominant catalytic process of CO oxidation via the Mars–van Krevelen (MvK) mechanism. The fabrication of five-coordinate cobalt ions and the enhanced covalency of Co–O bonds not only optimize the surface electronic structure of Co 3d–O 2p, but also supply active surface oxygen sites, which effectively oxidizes CO to CO 2 with a significantly improved oxidation performance and stability as evidenced by soft/hard XAS, XPS, and O 2 -TPD. Furthermore, online isotopic 18 O 2 mass spectrometry, in situ DRIFTS, and theoretical simulation demonstrate that the activity of surface oxygen sites enhances the kinetics of the MvK reaction, while unsaturated coordination sites from five-coordinate cobalt ions primarily contribute to the activated oxygen molecules and the stable catalytic cycle. The results reported here provide a deep insight into the comprehension of the relationships among active oxygen sites, surface electronic structure, and the reaction mechanism of transition metal oxides necessary for catalytic oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Operational control with set-points tuning - application to mobile robots

This paper proposes a novel method for the optimal tuning of set points for multiple-layered control system structure widely seen in robotics and other complex industrial processes composed of a number of subsystems. The terminal sliding mode control (SMC) is used as the low-level control strategy to ensure the stability of subsystems. When uncertainties exist, it can be shown that the deteriorated system performance will be improved by the outer loop with set points tuning. For this purpose, the learning of the new set point is designed to compensate for the effects caused by uncertainties during the system operation. At the same time, the system is proven to stay with the original set point when the compensation is introduced. A practical application to a holonomic mobile robot system is given to illustrate the presented method. Desired results have been obtained.

42 ENGINEERING↗
DOE OSTI2026

N -Terminal Octylated Peptoid Hydrogels as 3D-Printable Cell Scaffolds and Proteolytically Robust Cargo Depots

Supramolecular hydrogels that mimic the extracellular matrix (ECM) represent promising materials for tissue engineering and drug delivery. However, conventional hydrogels formed via the self-assembly of natural or synthetic building blocks often face a trade-off between biological functionality and biochemical stability, limiting their utility in long-term or protease-rich environments. Peptoids, a class of peptide-inspired, sequence-defined polymers, offer a compelling alternative due to their exceptional proteolytic resistance and bioactivity. Despite this potential, the development of supramolecular peptoid hydrogels has been hindered by the absence of backbone hydrogen bond donors, which limits long-range ordering necessary for efficient hydrogel formation. This work describes a short peptoid functionalized at the N-terminus with an octyl chain that readily self-assembles into hydrogels. Hydrophobic interactions among pendant octyl groups promote directional peptoid packing into highly ordered nanosheets, which interconnect to form a porous hydrogel network. These hydrogels exhibit tunable viscoelasticity, shear-thinning, and self-healing properties, enabling their use as inks for extrusion-based 3D printing. They support NIH-3T3 fibroblast adhesion, spreading, and proliferation, maintaining greater than 95% cell viability over 4 days. Moreover, the hydrogels retain their macroscopic integrity under protease-rich conditions, enabling sustained cargo release and uniform cellular uptake. Together, this study demonstrates a class of supramolecular peptoid hydrogelators that integrate biocompatibility, 3D printability, and proteolytic stability, providing a versatile platform for ECMmimetic scaffolds in regenerative medicine and long-term therapeutic delivery.

cargo delivery↗
DOE OSTI2020

Demonstrating the GaInP/GaAs Three-Terminal Heterojunction Bipolar Transistor Solar Cell

The three-terminal heterojunction bipolar transistor solar cell (HBTSC) concept enables the realization of a monolithic double-junction device with individual current extraction. We present an HBTSC realized by a heterojunction of GaInP and GaAs. The one-sun open-circuit voltage (V OC ) of the top and bottom junctions are 1.33 V and 0.99 V, respectively, while fill factors (FF) are above 80%. At one-sun illumination, reducing one junction's bias from V OC to maximum power point degrades the performance of the other junction only slightly (<; 0.5% efficiency loss). These results demonstrate the potential of the HBTSC concept to produce high-efficiency independently connected double-junction solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Photoinduced chemomimetic biocatalysis for enantioselective intermolecular radical conjugate addition

Exploiting nature’s catalysts for non-natural transformations that are inaccessible to chemocatalysis is highly desirable but challenging. On the one hand, the widespread nicotinamide-dependent oxidoreductases have not been utilized for single-electron-transfer-induced bimolecular cross-couplings; on the other, the addition of catalytic asymmetric radical con- jugate to terminal alkenes remains a challenge owing to strong racemic background reaction and unselective termination of prochiral radical species. Here we report a chemomimetic biocatalysitic approach for construction of alpha-carbonyl stereocentres via an unnatural intermolecular conjugate addition of N-(acyloxy)phthalimides-derived radicals with acceptor-substituted terminal alkenes, by combination of visible-light excitation and nicotinamide-dependent ketoreductases (KREDs). Based on protein crystal structure, we engineered KREDs via a semi-rational mutagenesis strategy to improve reaction outcomes with a small and high-quality variants library. Here, mechanistic investigations combining wet experiments, crystallographic studies and computational simulations demonstrate that the repurposed biocatalyst can suppress racemic background reaction and unselected side reactions, yielding enantioselectivity that is challenging to achieve by chemocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

fpikachu96/KRED-data

Exploiting nature’s catalysts for non-natural transformations that are inaccessible to chemocatalysis is highly desirable but challenging. On the one hand, the widespread nicotinamide-dependent oxidoreductases have not been utilized for single-electron-transfer-induced bimolecular cross-couplings; on the other, the addition of catalytic asymmetric radical conjugate to terminal alkenes remains a challenge owing to strong racemic background reaction and unselective termination of prochiral radical species. Here we report a chemomimetic biocatalysitic approach for construction of alpha-carbonyl stereocentres via an unnatural intermolecular conjugate addition of N-(acyloxy)phthalimides-derived radicals with acceptor-substituted terminal alkenes, by combination of visible-light excitation and nicotinamide-dependent ketoreductases (KREDs). Based on protein crystal structure, we engineered KREDs via a semi-rational mutagenesis strategy to improve reaction outcomes with a small and high-quality variants library. Mechanistic investigations combining wet experiments, crystallographic studies and computational simulations demonstrate that the repurposed biocatalyst can suppress racemic background reaction and unselected side reactions, yielding enantioselectivity that is challenging to achieve by chemocatalysis.

Huang, Xiaoqiang↗
DOE OSTI2025

Electric Drive Technologies Consortium (EDTC)/ Cost competitive, high-Performance, highly Reliable (CPR) Power Devices on 4H-SiC (Final Report)

4H-Silicon carbide (4H-SiC) is a wide bandgap semiconductor that offers superior material properties over silicon, including higher critical electric field, thermal conductivity, and electron saturation velocity. These advantages make 4H-SiC highly attractive for high-voltage, high-efficiency power electronics. However, realizing the full potential of SiC requires device technologies that are not only high-performing but also manufacturable and reliable under real-world operating conditions. This report summarizes the outcomes of a five-year R&D effort funded by the U.S. Department of Energy (DOE) under the Electric Drive Technologies Consortium (EDTC), focused on developing cost-competitive, high-performance, and highly reliable (CPR) power devices on 4H-SiC substrates. The program targeted scalable and manufacturable 1.2 kV-class SiC MOSFETs optimized for next-generation electric vehicles, renewable energy systems, and industrial power conversion. The project delivered transformative advancements in SiC power device performance and ruggedness. Particularly, Specific on-resistance (R on,sp ) was reduced by up to 37%, from ~4.0 m$\Omega \cdot$cm 2 in earlier designs to an industry-leading 2.40 m$\Omega \cdot$cm 2 , driven by optimized doping, refined JFET widths, and layout engineering. Breakdown voltages (BV) exceeded 1600 V, marking improvement over legacy baselines, and demonstrating the robustness of newly implemented junction profiles and edge terminations. Short-circuit withstand time (SCWT) saw a remarkable 4$\times$ increase, from ~2 $\mu$s to over 8 $\mu$s, achieved through the successful deployment of deep P-well structures (~1.8–2.0 $\mu$m) via channeling implantation. This innovative process breakthrough enabled precise junction formation without MeV-class implantation tools, reduced leakage under high field stress, and allowed even the shortest-channel devices (down to 0.3 $\mu$m) to achieve both high BV and excellent ruggedness—breaking the traditional trade-off between conduction efficiency and blocking capability. Several novel architectures pushed the performance envelope further. JBSFETs—featuring embedded Schottky portions—eliminated bipolar degradation and drastically reduced third-quadrant leakage, while Ladder MOSFETs introduced a clever orthogonal conduction path that achieved a 15.4% reduction in R on,sp over standard linear designs. Switching performance reached new benchmarks: short-channel devices showed a 31% reduction in total switching energy compared to 0.5 $\mu$m counterparts, while maintaining manageable gate drive requirements. Layout-optimized structures not only improved transconductance but also accelerated switching transitions, pointing to real-world benefits in converter-level efficiency. The devices also passed rigorous reliability validation. Stress-tested across TDDB, HTGB, HTRB, HVP, and burn-in, the devices screened under 30 V/10 hr and 43 V/1 s protocols consistently exhibited tighter lifetime distributions and long-term oxide robustness. These screening techniques proved effective in identifying latent defects and ensuring deployment-grade reliability. Meanwhile, advanced 3D TCAD simulations revealed and resolved electric field hotspots—particularly in HEXFET corners—where fields exceeding 4.8 MV/cm were mitigated through geometry-aware layout corrections. Overall, the results of this project demonstrate a manufacturable and scalable SiC power device platform that addresses key DOE performance targets for efficient, robust, and reliable 1.2kV 4H-SiC Power Devices. The developed technologies represent a meaningful step forward in the commercial readiness of high-voltage SiC solutions and provide a strong foundation for continued advancement in wide bandgap power electronics.

42 ENGINEERING↗
DOE OSTI2020

Gear Test Assembly - Report on Experimental Testing (FY2020)

The Gear Test Assembly (GTA) has completed Campaign #2 of in-sodium testing at the Mechanisms Engineering Test Loop (METL). Campaign #1 was conducted in 2019 and completed 19,600 cycles, correlating to 9,800 fuel assembly maneuvers. Campaign #1 was terminated following a shaft seizure caused by a failed bearing in the sodium gearbox. Campaign #2 was conducted in the spring of 2020 and completed 2,768 cycles, correlating to 1,384 fuel assembly maneuvers. Campaign #2 was terminated following elevated vibration measurements coming from the sodium gearbox. Following cleaning and disassembly, a bearing was found to have failed in the sodium gearbox. Campaign #1 used tapered roller bearings made of 52100 steel with a heat treatment from the manufacturer that allows for operation to 350°C. Campaign #2 used the same tapered roller bearings, but with no heat treatment. A new dynamic shaft seal design was used in Campaign #2 that led to significant reductions in argon consumption and graphite debris generation. A modified external gearbox system led to no external bearing failures and allowed for higher torque output. Finally, modifications to the Carbonation System led to a more effective carbonation process and all-around reduction in turnaround time.

42 ENGINEERING↗
DOE OSTI2021

Google/Makani Energy Kite Modeling (CRADA CRD-18-00569 Final Report)

In support of Makani’s energy kite development program, Makani engaged with NREL to develop, verify, and document a multiphysics engineering model of a megawatt-scale tethered energy kite (named KiteFAST). After the original development of KiteFAST was completed, Makani further engaged NREL to develop a software enhancement of KiteFAST to enable the dynamics modeling of an energy kite tethered to a floating offshore platform (named KiteFAST-OS). Before this project, the capability to model the aero-hydro-servo-elastic dynamics of an airborne wind energy (AWE) system with electricity generation on the flying device (fly gen) and crosswind flight operation did not exist. Such physics-based modeling capability is needed for loads analysis, structural design, and certification of energy kites. Throughout the project, an exclusive license kept KiteFAST and KiteFAST-OS available only to Makani, NREL, and its counterparts. With the ending of Makani, the KiteFAST and KiteFAST-OS software were merged into a single code base (named KiteFAST), the exclusive license was terminated, and the source code, documentation, and example models were released publicly.

17 WIND ENERGY↗
DOE OSTI2021

The impact of surface composition on the interfacial energetics and photoelectrochemical properties of BiVO{sub 4}.

The ability to engineer a photoelectrode surface is pivotal for optimizing the properties of any photoelectrode used for solar fuel production. Altering crystal facets exposed on the surface of photoelectrodes has been a major strategy to modify their surface structure. However, there exist numerous ways to terminate the surface even for the same facet, which can considerably alter the photoelectrode properties. Here we report tightly integrated experimental and computational investigations of epitaxial BiVO4 photoelectrodes with vanadium- and bismuth-rich (010) facets. Our study demonstrates that even for the same facet the surface Bi:V ratio has a remarkable impact on the interfacial energetics and photoelectrochemical properties. We also elucidate the microscopic origins of how the surface composition can affect the photoelectrochemical properties. This study opens an unexplored path for understanding and engineering surface energetics via tuning the surface termination/composition of multinary oxide photoelectrodes.

Lee, Dongho↗
DOE OSTI2020

Architecture of a catalytically active homotrimeric plant cellulose synthase complex

Cellulose is an essential plant cell wall component and represents the most abundant biopolymer on Earth. Supramolecular plant cellulose synthase complexes organize multiple linear glucose polymers into microfibrils as load-bearing wall components. We determined the structure of a poplar cellulose synthase CesA homotrimer that suggests a molecular basis for cellulose microfibril formation. This complex, stabilized by cytosolic plant-conserved regions and helical exchange within the transmembrane segments, forms three channels occupied by nascent cellulose polymers. Secretion steers the polymers toward a common exit point, which could facilitate protofibril formation. CesA’s N-terminal domains assemble into a cytosolic stalk that interacts with a microtubule-tethering protein and may thus be involved in CesA localization. Here, our data suggest how cellulose synthase complexes assemble and provide the molecular basis for plant cell wall engineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Structural Evolution of Layered Hybrid Lead Iodide Perovskites in Colloidal Dispersions

Controlling the structure of layered hybrid metal halide perovskites, such as the Ruddlesden-Popper (R-P) phases, is challenging because of their tendency to form mixtures of varying composition. Colloidal growth techniques, such as antisolvent precipitation, forms colloidal dispersions with properties that match bulk layered R-P phases, but controlling the composition of these particles remains challenging. Here, we explore the microstructure of particles of R-P phases of methylammonium lead iodide prepared by antisolvent precipitation from ternary mixtures of alkylammonium cations, where one cation can form perovskite phases (CH 3 NH 3 + ) and the other two promote layered structures as spacers (e.g. C 4 H 9 NH 3 + and C 12 H 25 NH 3 + ). We determine that alkylammonium spacers pack with constant methylene density in the R-P interlayer, and exclude interlayer solvent in dispersed colloids, regardless of length or branching. Using this result, we illustrate how the competition between cations that act as spacers between layers, or as grain- terminating ligands, determines the colloidal microstructure of layered R-P crystallites in solution. Optical measurements reveal that quantum well dimensions can be tuned by engineering the ternary cation composition. Transmission synchrotron wide-angle X-ray scattering and small angle neutron scattering reveal changes in the structure of colloids in solvent and after deposition into thin films. In particular, we find that spacers can alloy between R-P layers if they share common steric arrangements, but tend to segregate into polydisperse R-P phases if they do not mix. In conclusion, this study provides a framework to compare the microstructure of colloidal layered perovskites and suggests clear avenues to control phase and colloidal morphology.

14 SOLAR ENERGY↗
DOE OSTI2020

Monolithically-integrated AC switch having JBSFETs therein with commonly-connected drain and cathode electrodes

A monolithically-integrated AC switch includes a semiconductor substrate having first and second insulated-gate field effect transistors therein, which contain first and second spaced-apart and independently-controllable source terminals extending adjacent a first surface of the semiconductor substrate, yet share a common drain electrode extending adjacent a second surface of the semiconductor substrate. According to some of these embodiments of the invention, the first and second insulated-gate field effect transistors include respective first and second independently-controllable gate electrodes, which extend adjacent the first surface. The first and second insulated-gate field effect transistors may be configured as first and second vertical power MOSFETs, respectively. The semiconductor substrate may also include at least one edge termination region therein, which extends between the first and second vertical power MOSFETs.

42 ENGINEERING↗
DOE OSTI2023

A Multi-Dimensional Benefit Assessment of Automated Mobility Platforms (AMP) for Large Facilities: Mobility, Energy, Equity, and Facility Management & Design

The goal of the automated mobility platforms (AMPs) initiative is to raise the bar of service regarding equity and sustainability for public mobility systems that are crucial to large facilities, and doing so using electrified, energy efficient technology. Using airports as an example, the rapid growth in air travel demand has led to facility expansions and congested terminals, which directly impacts equity (e.g., increased challenges for Passengers with Reduced Mobility [PRMs]) and sustainability - both of which are important metrics often overlooked during the engineering design process. Therefore, to evaluate systems and inform critical near- and long-term decisions more effectively, a holistic evaluation framework is proposed focused on four key areas: (1) mobility, with emphasis on travel time and accessibility within an airport, (2) environment, focused on energy consumption and greenhouse gas (GHG) emissions associated with intra-airport mobility, (3) equity, specifically to the PRM community, but with an eye to the whole of society, and (4) built environment, or the fundamental changes in building design enabled by different mobility systems for larger and more flexible, functional, and energy-efficient structures. Below, AMPs are defined, and each metric is discussed further, all with a focus on airport mobility.

ADVANCED PROPULSION SYSTEMS↗