Results for “temperature target” — Page 4

DOE OSTI2024

Characterizing impurity sourcing and transport in the high temperature boundary of DIII-D wide pedestal QH-mode plasmas

Wide Pedestal QH-mode (WPQH) plasmas in the DIII-D tokamak show a sheath limited SOL, where electron density and temperature remain nearly constant along field lines from the midplane to the divertor. Consequently, parallel gradients are weak. The first Langmuir probe measurements in this regime point to a high sheath temperature with target electron temperature T e up to ~150 eV, leading to high carbon self-sputtering. Midplane carbon densities from SOLPS-ITER modeling of these plasmas in a double-null configuration fall far below experimental measurements unless full drifts are activated. In the drift-dependent SOLPS-ITER modeling, anomalous poloidally uniform, radially varying transport is adjusted to match measured radial electron temperature and density profiles in the pedestal and SOL region. The resulting carbon density (C6+) matches measured carbon densities just inside the separatrix. The C2+ density near the outer strike point is also consistent with spectroscopic imaging. With the ion B×∇B drift towards the X-point, carbon in the lower divertors is redistributed from the private flux region to the high field side (HFS) and pushed upstream in the SOL by poloidal E×B drifts. The B × ∇B drift dominates the radial flow of carbon as it moves upstream. Simulations with reversed toroidal field (ion B × ∇B drift away from the X-point) show a radically different behavior, where carbon accumulates on the low field side in lower divertors, and is pushed towards the HFS in the upper divertors, indicating a strong effect of particle drifts on impurity distribution. In double-null configurations which are usually used in WPQH plasmas, these drift effects tend to counterbalance, so that the carbon density and Z eff are reduced at the outer mid-plane only modestly, by around 7% in the modeling. Further predictive modeling indicates that the carbon density can be significantly reduced by an order of magnitude by implementing a single-null shape with reversed toroidal field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Validation of Hermes-3 turbulence simulations against the TCV-X21 diverted L-mode reference case

Electrostatic flux-driven turbulence simulations with the Hermes-3 code are performed in TCV L-mode conditions in forward and reversed toroidal field configurations, and compared to the TCV-X21 reference dataset (Oliveira et al 2022 Nucl. Fusion 62 096001) qualitatively and with a quantitative methodology. Using only the magnetic equilibrium, total power across the separatrix (120 kW) and total particle flux to the targets (3 x 10 21 s −1 ) as inputs, the simulations produce time-averaged plasma profiles in good agreement with experiment. Shifts in the target peak location when the toroidal field direction is reversed are reproduced in simulation, including the experimentally observed splitting of the outer strike point into two density peaks. The overall normalized discrepancy between simulation and observation is better than any previously reported in the reversed field configuration, and matches the best previously reported in forward field configuration. Differences between simulation and experiment include density profiles inside the separatrix and at the inner target in forward (favorable $\bigtriangledown B$) field configuration. These differences in target temperature in forward field configuration lead to differences in the balance of current to the inner and outer divertor in the private flux region. The cause of these differences is most likely the lack of neutral gas in these simulations, indicating that even in low recycling regimes neutral gas plays an important role in determining edge plasma profiles. These conclusions are consistent with findings in Oliveira et al (2022 https://github.com/SPCData/TCV-X21).

Physics - Plasma physics↗

DOE OSTI2026

Experimental investigation of a closed vapour box module for a divertor-like configuration in Magnum-PSI

Efficient management of extreme heat fluxes in the divertor region to extend the lifetime of the components remains a critical challenge for the realization of nuclear fusion-based power plants. Among the alternative concepts explored for the divertor region, the use of liquid metals, particularly lithium, is of interest due its ability to dissipate the incoming plasma heat flux through the vapour shielding effect (VS). In this work, we experimentally investigated a ‘closed’ configuration of a dedicated Vapour Box Module (VBM) in the linear plasma device Magnum-PSI. The goal of the experiments is to simulate the vapour box divertor environment conditions and assess its performance in terms of power mitigation and redistribution and lithium confinement. Initial testing without Li demonstrated the efficacy of a closed VBM structure in inducing detachment via neutral gas accumulation. Apertures which enabled non-condensing gas to be effectively pumped while ensuring lithium condensed on the inner surfaces were therefore added. With a lithium capillary porous structure target used, lithium is directly vaporized by the plasma, forming a dense lithium vapour cloud that interacts with the incoming plasma. This resulted in a significant reduction of the target temperature of at least 48%, together with a temperature locking effect, a phenomenon typically observed in the VS regime. Lithium vapour confinement within the VBM was strongly correlated with the wall temperature. Relatively cold walls promoted Li re-condensation and therefore improved Li confinement, although with the expected trade-off of increased hydrogenic retention on lithium-wetted surfaces. As the wall temperature increased, the confinement efficiency decreased, consistent with reduced Li re-condensation and thermally activated Li–H chemistry and remobilization at the walls. Diagnostic measurements through embedded thermocouples and calorimetry revealed that lithium vaporization and re-condensation processes also playedsignificant roles in plasma power dissipation. The results advance the case for a closed divertor chamber with direct lithium evaporation from the strike-points as a viable method to manage divertor heat fluxes in future fusion reactors.

Romano, Fabio [Dutch Institute for Fundamental Ene↗

DOE OSTI2020

Stranded asset implications of the Paris Agreement in Latin America and the Caribbean

Achieving the Paris Agreement's near-term goals (Nationally Determined Contributions, NDCs) and long-term temperature targets could result in pre-mature retirement, or stranding, of carbon-intensive assets before the end of their useful lifetime. We use an integrated assessment model to quantify the implications of the Paris Agreement for stranded assets in Latin America and the Caribbean (LAC), a developing region with the least carbon-intensive power sector in the world. We find that meeting the Paris goals results in stranding of 37-90 billion and investment of 1.9-2.6 trillion worth of power sector capital (2021-2050) across a range of future scenarios. Strengthening the NDCs could reduce stranding costs by 27-40%. Additionally, while politically shielding power plants from pre-mature retirement or increasing the role of other sectors (e.g. land-use) could also reduce power sector stranding, such actions could make mitigation more expensive and negatively impact society. For example, we find that avoiding stranded assets in the power sector increases food prices 13%, suggesting implications for food security in LAC. Our analysis demonstrates that climate goals are relevant for investment decisions even in developing countries with low emissions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Anthropogenic–biogenic interaction amplifies warming from emission reduction over the southeastern US

A decline of surface biogenic secondary organic aerosols through the mediation of reduced anthropogenic aerosols has been recognized as an air quality co-benefit of anthropogenic emission control over the southeastern US. However, the climate impacts of this anthropogenic–biogenic interaction remain poorly understood. Here, we identified a substantial decline of summertime aerosol loading aloft over the southeastern US in recent decades through the interaction, which leads to a stronger decline in column-integrated aerosol optical depth and a greater increase in radiative fluxes over the southeastern than northeastern US, different from trends of anthropogenic emissions and near-surface aerosol loading. The anthropogenic–biogenic interaction is shown to explain more than 60% of the coherent increasing trend of 5.3 Wm -2 decade -1 in clear-sky surface downward radiative fluxes. We show that current climate models fail to represent this interaction. The interaction is further projected to amplify the positive radiative forcing from emission control by 42.3% regionally over the southeastern US and globally by 5.4% in 2050 under RCP4.5 compared to 2005. This amplification effect implies greater challenges to achieving the Paris Agreement temperature targets with continuous emission control in future.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Reaching the equilibrium state of the frustrated triangular Ising magnet Ca 3 Co 2 O 6

Ca 3 Co 2 O 6 is a frustrated magnet consisting of a triangular arrangement of chains of Ising spins. It shows regular magnetization steps versus magnetic field every 1.2 T that are metastable with very slow dynamics. This has puzzled the community for many years and given rise to numerous potential theories. Here we approach the problem by seeking the elusive magnetic equilibrium state at T=2 K. To this end, we explore two approaches: (1) bypassing the slow dynamics produced by changing fields by instead field-cooling directly to the target temperature and (2) quantum annealing in transverse magnetic fields. While we observe no measurable effect of the quantum annealing in fields up to 7 T, which is likely due to the large Ising anisotropy of Co spins in this material, we find that for the field cooling in longitudinal fields we achieve the predicted equilibrium 1/3 magnetization. We perform Monte Carlo simulations of the ground state phase diagram and we also simulate the quantum annealing process and find good agreement between experiment and theory. Thus we present an investigation of the elusive ground state properties of the canonical frustrated triangular system Ca 3 Co 2 O 6 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Impact Testing and Analysis of Modified Metal Slugs

This report summarizes initial results from a series of gun experiments which were conducted at the DICE facility. The target of these experiments was a modified metal slug composed of a tantalum/tungsten alloy (Ta-10W). The general geometry of the slug was a right circular cylinder with a through-hole cut normal to the cylinder's axis. In all experiments, hardened steel impactors were used, the desired impact velocity was 200 m/s, the slug was preheated to a target temperature of 175° C, photon doppler velocimetry (PDV) was used to measure the projectile velocity before and after impact, and the impact event was recorded with high-speed video. In two of the impacts the slug was oriented perpendicular to the projectile, while in the remaining two it was tilted 8° from normal. Initial high-speed speed video results showed slug failure in the tilted impact case, while the slug survived normal impacts. Recovery fixtures were used to preserve impacted slugs for future postmortem analysis. Discussions are included regarding improvements to potential future experiments involving these slugs.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2021

Mechanical Properties of Additively Manufactured 316L Stainless Steel Before and After Neutron Irradiation (FY21)

This report presents the materials property data of additively manufactured (AM) 316L stainless steel (SS) accumulated for the assessment of core materials in the Transformational Challenge Reactor (TCR) program. The TCR manufacturing approach includes using the laser powder bed fusion (LPBF) method for metallic (316L and Inconel 718) components. To assess the mechanical performance of printed components in reactor-relevant conditions and build a property database for the AM materials, mechanical tests and evaluations were performed before and after neutron irradiation. Miniature tensile specimens were irradiated in the High Flux Isotope Reactor to 0.2, 2, 8, and 10 dpa at target temperatures of 300 and 600°C. Postirradiation evaluation for the 0.2 and 2 dpa specimens was performed during FY20 and FY21, and the results are presented and discussed in this document.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Mechanical Properties of Additively Manufactured 316L Stainless Steel Before and After Neutron Irradiation–FY23

This report presents the observed mechanical behavior of the additively manufactured (AM) 316L stainless steel (SS) before and after neutron irradiation. In the Advanced Materials and Manufacturing Technologies (AMMT) program, a variety of mechanical and physical property data are generated and accumulated to assess the AM austenitic alloy for nuclear reactor applications. The testing and evaluation task in the FY 2023 focused on elucidating the effects of sampling location and build size on the mechanical properties of AM 316L SS (in stress-relieved condition) before and after neutron irradiation. The laser powder bed fusion (LPBF) process produced 316L plates of three distinct sizes from which SS-J3 miniature tensile specimens were machined from six different locations. The tensile specimens were irradiated in the High Flux Isotope Reactor (HFIR) normally to 2 and 10 dpa at the target temperatures of 300 °C and 600 °C. Post-irradiation tensile testing was performed at room temperature, 300 °C, and 600 °C. The mechanical properties of AM 316L SS were significantly influenced by the characteristic microstructures of printed materials, which include fine grains and high-density dislocations. Compared with the traditional 316L SS, AM 316L showed higher initial strength and lower ductility. Regardless of sampling location, the AM 316L steel retained relatively high strength and ductility to the highest irradiation dose. A prompt necking at yield (with little uniform ductility) was observed after irradiation at 300 °C but no embrittlement was observed up to 10 dpa. Ductilization by irradiation–the radiation-induced increase of ductility–was observed for the 600 °C irradiation only and it occurred in low dose range only. The neutron irradiation increased the data variation in many tensile property datasets, particularly after 600 °C irradiation, and no clear dependence of tensile properties on build thickness or sampling location was observed.

36 MATERIALS SCIENCE↗

DOE OSTI2026

High-Latitude, Low-Altitude SAI: Overview of G6-1.5K-HiLLA Simulations in E3SMv3

This report details a contribution of Energy Exascale Earth System Model version 3 (E3SMv3) simulations to a proposed model intercomparison project funded and organized by Reflective, a nonprofit group studying the possible global impacts of SAI. Using annual feedback control and seasonally-variable injection sites to achieve a desired global near-surface temperature target, the simulated SAI campaign indicates robust maintenance of the 2020-2039 climatic state over 60 years into the future.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Mechanical Property Measurements of HFIR-irradiated FM and ODS Alloys

This report provides a summary of the post-irradiation examination of the tensile properties of three ODS ferritic alloys, 14YWT-SM13, 9YWTV-PM2 and OFRAC, and two HT9 ferritic/martensitic steels, one with low N content and the other with high N content. The neutron irradiations were conducted in the flux trap of the High Flux Isotope Reactor as part of the A dditive M anufacturing, O xide Dispersion Strengthened Alloys and W rought Steels (AMOW) irradiation campaign. Sub-sized tensile specimens fabricated from each material were exposed to nominal target temperatures and neutron doses of 300°C, 385°C, and 525°C and 8 dpa, 16 dpa, and 50 dpa, respectively.

14YWT-SM13, 9YWTV-PM2, and OFRAC, and two HT9 ferr↗

DOE OSTI2025

Capsule Design and Preparation for YH x Specimen Irradiation in the High Flux Isotope Reactor

Advanced nuclear systems for terrestrial microreactors and space applications require moderator materials with high thermal stability, hydrogen retention, and efficient neutron moderation. Yttrium hydride (YH x ) is a promising candidate, but its irradiation performance and hydrogen stability remain insufficiently understood. To address this, Oak Ridge National Laboratory (ORNL) and Los Alamos National Laboratory, supported by the US Department of Energy’s Nuclear Science User Facilities program, have initiated an irradiation campaign in ORNL’s High Flux Isotope Reactor. The experiment employs six irradiation capsules containing YH x specimens (H/Y ≈ 1.9) designed for three target temperatures (300°C, 400°C, and 500°C) and two distinct neutron fast fluence levels. This report documents the irradiation test matrix, capsule design, specimen precharacterization, and experiment readiness for insertion. Planned postirradiation examinations will provide new insights into hydrogen retention and microstructural stability, advancing the understanding of YH x as a moderator for compact reactor applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Capsule Design and Preparation for YH x Specimen Irradiation in the High Flux Isotope Reactor

Advanced nuclear systems for terrestrial microreactors and space applications require moderator materials with high thermal stability, hydrogen retention, and efficient neutron moderation. Yttrium hydride (YH x ) is a promising candidate, but its irradiation performance and hydrogen stability remain insufficiently understood. To address this, Oak Ridge National Laboratory (ORNL) and Los Alamos National Laboratory, supported by the US Department of Energy’s Nuclear Science User Facilities program, have initiated an irradiation campaign in ORNL’s High Flux Isotope Reactor. The experiment employs six irradiation capsules containing YH x specimens (H/Y ≈ 1.9) designed for three target temperatures (300°C, 400°C, and 500°C) and two distinct neutron fast fluence levels. This report documents the irradiation test matrix, capsule design, specimen precharacterization, and experiment readiness for insertion. Planned postirradiation examinations will provide new insights into hydrogen retention and microstructural stability, advancing the understanding of YHx as a moderator for compact reactor applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Mechanical Property Measurements of HFIR-irradiated FM and ODS Alloys

This report provides a summary of the post-irradiation examination of the tensile properties of three ODS ferritic alloys, 14YWT-SM13, 9YWTV-PM2 and OFRAC, and two HT9 ferritic/martensitic steels, one with low N content and the other with high N content. The neutron irradiations were conducted in the flux trap of the High Flux Isotope Reactor as part of the Additive Manufacturing, Oxide Dispersion Strengthened Alloys and Wrought Steels (AMOW) irradiation campaign. Sub-sized tensile specimens fabricated from each material were exposed to nominal target temperatures and neutron doses of 300°C, 385°C, and 525°C and 8 dpa, 16 dpa, and 50 dpa, respectively.

36 MATERIALS SCIENCE↗

DOE OSTI2026

A New Era for Bubble Chamber Technology

Neutrino experiments like DUNE are limited by how well we understand the way neutrinos actually interact with atoms. The best way to fix that is to measure interactions on hydrogen, since a hydrogen nucleus is just a single free proton with largely none of the nuclear effects that heavier targets like argon have. The catch is that no one has built a hydrogen bubble chamber for a neutrino beam since the 1980s, mostly because the old chambers had too low of an active time. MAMBA is a project focused on bringing that technology back but built to cycle continuously at 1 Hz. I spent my summer internship on two of the subsystems that make that kind of speed possible. First, I helped install and test a new solid copper thermal link that replaced the old flexible braided cooling path, and it brought the coldhead down to 21.3 K, right at the target temperature. Second, I built and tested a Raspberry Pi based PLC control system, and across 20,000 trials it answered in a median of 0.64 ms, with only 0.66\% of trials running past 1 ms. Both results point the same direction: that inexpensive, off the shelf hardware can perform fast and reliable enough to eventually run a bubble chamber the way MAMBA needs it to run.

Williams, Nicholas [DuPage Coll.]↗

DOE OSTI2026

PM-HIP Mechanical Data Archive

This is the mechanical testing data archive from a neutron irradiation campaign of nuclear structural alloys fabricated by powder metallurgy with hot isostatic pressing (PM-HIP). Data in this archive include uniaxial tensile testing data, fractography of selected tensile bars, and nanoindentation. The irradiation campaign was designed to facilitate a direct comparison of PM-HIP to conventional casting or forging. Five common nuclear structural alloys were included in the campaign: 316L stainless steel, SA508 pressure vessel steel, Grade 91 ferritic steel, and Ni-base alloys 625 and 690. Irradiations were carried out in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) to target doses of 1 and 3 displacements per atom (dpa) at target temperatures of 300ºC and 400ºC through the DOE Office of Nuclear Energy, Nuclear Science User Facilities (NSUF) project 15-8242.

Wharry, Janelle↗

DOE OSTI2026

Fractography

This is the mechanical testing data archive from a neutron irradiation campaign of nuclear structural alloys fabricated by powder metallurgy with hot isostatic pressing (PM-HIP). Data in this archive include uniaxial tensile testing data, fractography of selected tensile bars, and nanoindentation. The irradiation campaign was designed to facilitate a direct comparison of PM-HIP to conventional casting or forging. Five common nuclear structural alloys were included in the campaign: 316L stainless steel, SA508 pressure vessel steel, Grade 91 ferritic steel, and Ni-base alloys 625 and 690. Irradiations were carried out in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) to target doses of 1 and 3 displacements per atom (dpa) at target temperatures of 300ºC and 400ºC through the DOE Office of Nuclear Energy, Nuclear Science User Facilities (NSUF) project 15-8242.

Wharry, Janelle↗

DOE OSTI2026

G91-P_400C_1DPA_(ID-403)

This is the mechanical testing data archive from a neutron irradiation campaign of nuclear structural alloys fabricated by powder metallurgy with hot isostatic pressing (PM-HIP). Data in this archive include uniaxial tensile testing data, fractography of selected tensile bars, and nanoindentation. The irradiation campaign was designed to facilitate a direct comparison of PM-HIP to conventional casting or forging. Five common nuclear structural alloys were included in the campaign: 316L stainless steel, SA508 pressure vessel steel, Grade 91 ferritic steel, and Ni-base alloys 625 and 690. Irradiations were carried out in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) to target doses of 1 and 3 displacements per atom (dpa) at target temperatures of 300ºC and 400ºC through the DOE Office of Nuclear Energy, Nuclear Science User Facilities (NSUF) project 15-8242.

Wharry, Janelle↗