Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “suspensions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Dynamic Response of a Semiactive Suspension System with Hysteretic Nonlinear Energy Sink Based on Random Excitation by means of Computer Simulation

This paper aims to investigate the property and behavior of the hysteretic nonlinear energy sink (HNES) coupled to a half vehicle system which is a nine-degree-of-freedom, nonlinear, and semiactive suspension system in order to improve the ride comfort and increase the stability in shock mitigation by using the computer simulation method. The HNES model is a semiactive suspension device, which comprises the famous Bouc–Wen (B-W) model employed to describe the force produced by both the purely hysteretic spring and linear elastic spring of potentially negative stiffness connected in parallel, for the half vehicle system. Nine nonlinear motion equations of the half vehicle system are derived in terms of the seven displacements and the two dimensionless hysteretic variables, which are integrated numerically by employing the direct time integration method for studying both the variables of vertical displacements, velocities, accelerations, chassis pitch angle, and the ride comfort and driver safety, respectively, based on the bump and random road inputs of the pseudoexcitation method as excitation signal. Simulation results show that, compared with the HNES model and the magnetorheological (MR) model coupled to the half vehicle system, the ride comfort and stability have been evidently improved. A successful validation process has been performed, which indicated that both the ride comfort and driver safety properties of the HNES model coupled to half vehicle significantly improved.

Chen, Hui↗
DOE OSTI2023

Biophotonic rogue waves in red blood cell suspensions

Rogue waves are ubiquitous in nature, appearing in a variety of physical systems ranging from acoustics, microwave cavities, optical fibers, and resonators to plasmas, superfluids, and Bose–Einstein condensates. Unlike nonlinear solitary waves, rogue waves are extreme events that can occur even without nonlinearity by, for example, spontaneous synchronization of waves with different spatial frequencies in a linear system. Here, we report the observation of rogue-wave-like events in human red blood cell (RBC) suspensions under weak light illumination, characterized by an abnormal L-shaped probability distribution. Such biophotonic extreme events arise mostly due to the constructive interference of Mie-scattered waves from the suspended RBCs, whose biconcave shape and mutable orientation give rise to a time-dependent random phase modulation to an incident laser beam. We numerically simulate the beam propagation through the colloidal suspensions with added disorder in both spatial and temporal domains to mimic random scattering due to Brownian motion. In addition, at high power levels, nonlinear beam self-focusing is also observed, leading to a dual-exponential probability distribution associated with the formation of multiple soliton-like spots. Such rogue wave events should also exist in environments with cells of other species such as swimming bacteria, and understanding of their underlying physics may lead to unexpected biophotonic applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Multi-fidelity modeling to predict the rheological properties of fiber suspensions

Unveiling the rheological properties of fiber suspensions is of paramount interest to many industrial applications like biofuel production. The 3D numerical simulations of the suspension of fibers are often computationally expensive and time-consuming. Machine learning methods such as neural networks can simplify the prediction of rheological behavior; however, they require a relatively large training data set. Multi -fidelity models, which combine high-fidelity data from numerical simulations and less expensive lower fidelity data from resources such as simplified physical equations, can lead to optimized predictions. Here, we focus on a neural network with two levels of fidelity, i.e., high and low fidelity networks. To produce high-fidelity data, we perform direct numerical simulations to model the fibers as one-dimensional inextensible slender bodies that obey the Euler- Bernoulli beam equation. The Navier-Stokes equations govern the suspended fluid, and an immersed boundary method is used to couple the fluid and solid motion. The low-fidelity data is produced by using constitutive equations. Noticeable improvements have been observed in the accuracy of predicting the rheological behavior when a multi-fidelity network is used compared to the single-fidelity network.

Boodaghidizaji, Miad↗
DOE OSTI2023

Experiments and Simulations to Describe Alkalinity Release from Particle-Containing Oil-in-Water Emulsions and Particle Suspensions

Among the most common amendments added to groundwater during site remediation are compounds used to adjust or maintain the pH. This research describes an approach to encapsulate mineral particles (MgO and CaCO 3 ) within oil droplets suspended within an aqueous phase for the purpose of delivery to the subsurface environment. A series of batch experiments was combined with mathematical modeling to illustrate the encapsulation and understand the influence of particle encapsulation on rates and extents of alkalinity release. The encapsulation of the alkalinity-releasing particles results in slower rates of amendment release as compared to rates obtained using suspensions of bare mineral particles, allowing for the possibility of control as a function of the pH. The results indicate that the alkalinity release from particle suspensions followed a mineral dissolution mechanism that could not explain the rate of the alkalinity release of the encapsulated particles. The reduction in mineral dissolution rates observed with the encapsulated particles was found to result from a mass transfer limitation. This limitation was well described using a linear driving force expression to account for the resistance to mass transfer at the oil–water interface.

EVO↗
DOE OSTI2020

An acidic polysaccharide (AGC3) isolated from North American ginseng ( Panax quinquefolius ) suspension culture as a potential immunomodulatory nutraceutical

Polysaccharides isolated from Panax quinquefolius roots are widely used as nutraceuticals due to their immunomodulatory properties. Despite their popularity, several challenges exist in isolating ginseng root polysaccharides such as batch-to-batch structural inconsistencies and bacterial endotoxin contamination. A plant tissue culture-based platform offers a potential solution to isolate natural polysaccharide fractions with consistent chemical characteristics and reduced endotoxin content. In this study, an acidic polysaccharide fraction (AGC3) with immunomodulatory properties was isolated from Panax quinquefolius suspension cultures. The heterogeneous fraction (molecular weight: 4.81 and 32.14 kDa), purified by anion exchange chromatography, was predominantly composed of galactose (>60%) along with the presence of rhamnose, arabinose, glucose, glucuronic acid and galacturonic acid. The major glycosidic linkages were found to be t-Galp (47.7%), 4-Galp (15.6%), 2,4-Rhap (8.1%), 6-Galp (8.1%) and 4-GalAp (6.8%). Structural analyses indicated the presence of a pectic rhamnogalacturonan I polysaccharide in AGC3. AGC3 significantly (p < 0.05) stimulated RAW 264.7 murine macrophage cells and primary murine splenocytes by enhancing the production of several immunomodulatory mediators such as IL-6, TNF-α, GM-CSF and MCP-1. The results also indicated the putative roles of NF-κB (p65/RelA) and MAPK (p38) signaling pathways in the immunostimulatory response. Additionally, AGC3 induced murine splenocyte proliferation, another major indicator of immunostimulation. Overall, AGC3 has the potential to be used as an immunostimulatory nutraceutical.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

The dynamics of suspensions of prolate spheroidal particles—Effects of volume fraction

Here, the effect of volume fraction on the dynamics of a gravity driven suspension of prolate spheroidal solid particles in a fully periodic domain is examined by fully resolved numerical simulations, for relatively modest Reynolds numbers (around 20, depending on the volume fraction). Three systems are examined, for volume fractions of 2.2% (20 particles), 5.5% (50 particles), and 9.9% (90 particles). The results show a transition from flow at low volume fractions dominated by the hydrodynamic interactions between the particles and the fluid, although modified by collisions, to flow dominated by collisions at higher volume fractions. The distribution of the particles with respect to each other, as measured by the probability distribution of nearest distances, is nearly random at low volume fractions but at high volume fractions, there is more clustering than for a random distribution. At lower volume fractions most of the particles fall broadside on whereas at the highest volume fraction, their orientation is essentially random.

42 ENGINEERING↗
DOE OSTI2021

Linear and nonlinear viscoelasticity of concentrated thermoresponsive microgel suspensions

We present an integrated experimental and theoretical study of the dynamics and rheology of self-crosslinked, slightly charged, temperature responsive soft poly(N-isopropylacrylamide) (pNIPAM) microgels over a wide range of concentration and temperature spanning the sharp change in particle size and intermolecular interactions across the lower critical solution temperature (LCST). Dramatic, non-monotonic changes in viscoelasticity are observed as a function of temperature, with distinct concentration dependence in the dense fluid, glassy, and soft-jammed regimes. Motivated by our experimental observations, we formulate a minimalistic model for the size dependence of a single microgel particle and the change of the interparticle interaction from purely repulsive to attractive upon heating. Using microscopic equilibrium and time-dependent statistical mechanical theories, theoretical predictions are quantitatively compared with experimental measurements of the shear modulus. Good agreement is found for the nonmonotonic temperature behavior that originates as a consequence of the competition between reduced microgel packing fraction and increasing interparticle attractions. Furthermore, testable predictions are made for nonlinear rheological properties such as the yield stress and strain. To our knowledge, this is the first attempt to quantitatively understand in a unified manner the viscoelasticity of dense, temperature-responsive microgel suspensions spanning a wide range of temperatures and concentrations.

42 ENGINEERING↗
DOE OSTI2020

Creation of a High-Yield AAV Vector Production Platform in Suspension Cells Using a Design-of-Experiment Approach

Recombinant adeno-associated virus (rAAV) vectors are a leading gene delivery platform, but vector manufacturing remains a challenge. New methods are needed to increase rAAV yields and reduce costs. Past efforts to improve rAAV production have focused on optimizing a single variable at a time, but this approach does not account for the interactions of multiple factors that contribute to vector generation. Here, we utilized a design-of-experiment (DOE) methodology to optimize rAAV production in a HEK293T suspension cell system. We simultaneously varied the transgene, packaging, and helper plasmid ratios, the total DNA concentration, and the cell density to systematically evaluate the impact of each variable across 52 conditions. The results revealed a unique set of parameters with a lower concentration of transgene plasmid, a higher concentration of packaging plasmid, and a higher cell density than previously described protocols. Using this DOE-optimized protocol, we achieved unpurified yields approaching 3 × 10 14 viral genomes (VGs)/L of cell culture. Additionally, we incorporated polyethylene glycol (PEG)-based virus precipitation, pH-mediated protein removal, and affinity chromatography to our downstream processing, enabling average purified yields of >1 × 10 14 VGs/L for rAAV-EGFPs across 13 serotypes and capsid variants.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Porous architecture and thermal properties of thermal barrier coatings deposited by suspension plasma spray

Besides the intrinsic low heat transfer capability of material, the thermal insulation property of thermal barrier coatings (TBCs) also relies on their microstructures. For better understanding the relationship between process parameters, porous architecture, and thermal properties of coatings, YSZ coatings were firstly manufactured by suspension plasma spray (SPS). Afterwards their total porosities were characterized by using the technique of X-ray transmission, the nano/submicro pores in those coatings were detected with Ultra-Small Angle X-ray Scattering (USAXS), and the thermal properties of coatings were measured using the laser flash method. The results indicated that: i) the porous architecture of SPS coatings can be tailored by adapting process parameters. ii) increasing total porosity is an effective means for reducing the heat transfer capability of SPS coatings. iii) nano/submicro pores have higher influence sensitivity on thermal properties than that of larger pores. Increasing the content of nano-submicro pores is therefore more effective for improving the thermal insulation property of SPS coatings. The potential of SPS technique for fabricating TBCs was discussed as well.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Heating of aqueous suspensions of silicon nanoparticles by a 808-nm diode laser for application in local photohyperthermia

3D simulation of the distribution of thermal fields in aqueous suspensions of silicon nanoparticles upon irradiation by a high-power 808-nm laser diode operating in cw and quasi-cw repetitively pulsed regimes is performed. It is shown that irradiation by a repetitively pulsed laser with a peak power of 10 W and a pulse duration of 300 ms can form a region with a maximum temperature exceeding 42 °C, which is promising for application in cancer photohyperthermia for local heating of biotissues at a given depth. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Onset of interfacial waves in the terahertz spectrum of a nanoparticle suspension

We used inelastic x-ray scattering to gain insight into the complex terahertz dynamics of a diluted Au-nanoparticle suspension in glycerol. Here, we observe that, albeit sparse, Au nanoparticles leave clear signatures on the dynamic response of the system, the main one being an additional mode propagating at the nanoparticle-glycerol interface. A Bayesian inferential analysis of the line shape reveals that such a mode, at variance with conventional acoustic modes, keeps a hydrodynamiclike behavior well beyond the continuous limit and down to subnanometer distances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

JET EROSION OF PARTICLE BEDS: PROJECTING CRITICAL SUSPENSION VELOCITIES FROM EFFECTIVE CLEARING / CLEANING RADII

Here we explore the relationship between effective cleaning/clearing radii, ECR, and critical suspension velocities, Ucs. Although one set of physics controls both the radial extent of erosion (i.e., the ECR) and the velocity needed to erode from the center of jet impingement to any given location (i.e., Ucs, typically defined from nozzle center to the vessel center), the relationship between these two remains unexplored quantitatively. Here we advance the model of Kuhn, et al., (PNNL-22816, 2013) as described by Pease, et al. (FEDSM2017-69444, 2017) to evaluate the relationship between the effective clearing/cleaning radius and the nozzle velocity on flat surfaces including flat bottomed vessels. Two governing dimensionless groups are identified. We present both a closed form analytical but transcendental solution and a non-iterative approximation modeled after the Serghides approximation of Colebrook’s nonlinear equation for both ECR versus nozzle velocity and Ucs. Comparison of the model to data from flume testing on a flat surface finds reasonable agreement.

jet, erosion, critical suspension velocity, effect↗
DOE OSTI2026

High-gradient magnetic filtration of UO 2 colloids from aqueous suspensions

Environmental samples often contain innocuous components that make trace actinide analysis difficult and expensive. Therefore, it is expedient to separate these materials from actinide particles. One characteristic of many actinides is that they are paramagnetic. High-gradient magnetic filtration (HGMF) is a non-destructive technique that selectively captures magnetic constituents from a matrix containing non-magnetic species. Here, in this work, a novel HGMF device made of a permanent magnet array was used to effectively separate UO 2 particles from undesirable soil species. Up to 88% of the UO 2 particles present in suspensions were effectively captured by HGMF, resulting in their enrichment and a substantial reduction in the concentrations of other constituents.

Actinide separations↗
DOE OSTI2024

1,4-cineole: a bio-derived solvent for highly stable graphene nanoplatelet suspensions and well-dispersed UHMWPE nanocomposite fibers

The exceptional properties of carbon nanoparticles, such as graphene, promise to expand the performance and functionality of many materials. The reinforcement of polymers is of keen interest due to their low density and flexible manufacturing methods. However, dispersing graphene in them has proven to be an enduring challenge due to the particles’ propensity to form performance degrading agglomerations. Furthermore, effective solvents for nanoparticle dispersion are commonly harmful, non-renewable, petrochemicals. In this work, a bio-derived solvent, 1,4-cineole, is demonstrated as a renewable alternative to these solvents that can be used to form highly stable graphene nanoplatelet (GnP) suspensions and used to gel spin well-dispersed UHMWPE/GnP nanocomposite fibers. The GnP concentration in the fibers was varied across three orders of magnitude, 0.01 wt% to 1 wt%, to examine its effect on fiber microstructure and properties. At low concentrations the particles act as point defects without affecting the fiber microstructure, and poor particle/matrix interfacial adhesion results in significantly reduced mechanical properties. At 1 wt% GnPs, a network effect takes hold thereby reinforcing the fibers, but the particles also impede the growth and orientation of crucial load-carrying crystalline structures in the fiber. Furthermore, unveiling the microstructural effects of GnPs on highly oriented and crystalline polymers in this study provides crucial insights for future work developing high-performance polymer nanocomposite fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An organogel library for solution NMR analysis of nanoparticle suspensions in non-aqueous samples

Surface contrast solution NMR methods (scNMR) are emerging as powerful tools to investigate the adsorption of small molecule ligands to the surface of nanoparticles (NP), returning fundamental insight into the kinetics and thermodynamics of sorption, as well as structural information on the adsorbed species. A prerequisite for the acquisition of high quality solution NMR data is the preparation of homogeneous and stable samples that return consistent NMR spectra and allow extensive signal averaging. Unfortunately, this condition does not apply to NMR samples containing NPs that often show a tendency to sediment and accumulate at the bottom of the NMR tube over the course of the experiment. We have recently shown that preparing NMR samples in an agarose gel matrix inhibits sedimentation and allows the characterization of small molecule-NP interactions by scNMR. Unfortunately, as the agarose gel only forms in aqueous solution, this sample preparation method cannot be used to stabilize NP suspensions in a non-aqueous environment. In this work, we introduce a library of 48 organogels, based on low molecular-mass organic gelators (LMOGs), to prepare NMR samples of small molecule/NP systems in a wide range of organic solvents. In addition, we present a simple method that takes advantage of 1H transverse relaxation (1H-R2) measurements to screen the library and identify the best gelator to characterize the small molecule-NP interaction of interest in the solvent of choice. We expect the results of this study will enable the preparation of homogeneous and stable samples of NPs in non-aqueous environments, therefore dramatically increasing the applicability of scNMR to the characterization of heterogeneous interactions and to the investigation of the role played by solvent molecules in regulating the kinetics and thermodynamics of sorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Selective capture and recovery of uranium oxide colloids from aqueous soil suspensions using high gradient magnetic filtration

High Gradient Magnetic Filtration (HGMF) is a promising method for the selective capture and recovery of uranium oxide from surface soils. To date, however, magnetic filtration of uranium oxide has only been demonstrated at a proof-of-principle scale using relatively small filters (<5 cm 3 ) at low flowrates (<60 mL/min). Here, to explore the efficacy of magnetic filtration of uranium oxide at a larger scale, a newly designed HGMF apparatus that is more than an order of magnitude larger than our earlier filters (106 cm 3 ) was designed, fabricated, and tested at relatively high flowrates. Filtration experiments were performed using aqueous uranium oxide particle suspensions with Arizona Road Dust (ARD) as a soil simulant. At a flowrate of 125 mL/min, the apparatus’ uranium capture rate was exceptionally high (96 %), but selectivity was poor due to the high rate of capture for diamagnetic soil constituents (e.g., 77 % for silicon). All particles were captured at a lower rate when the flowrate was increased to 250 mL/min, but uranium selectivity was significantly increased due to the more substantial reduction in diamagnetic particle capture (i.e., capture rate of 77 % and 15 % for uranium and silicon, respectively). When backwashing the apparatus at the same flowrates used during filtration experiments, the rate of uranium recovery tended to be fairly low. Nevertheless, higher flowrates (1 L/min) and sonication were both shown to be highly effective methods of increasing uranium recovery. Magnetic field simulations were also performed to investigate potential optimizations to the design of the apparatus. These simulations showed that the intensity of the applied magnetic field could be increased by increasing the thickness of the steel magnetic housing. Additionally, stochastic trajectory simulations were performed to investigate the potential mechanisms of particle capture.

HGMF↗
DOE OSTI2022

Scaling of Shear Rheology of Concentrated Charged Colloidal Suspensions across Glass Transition

Electrostatic interparticle interactions are a key component in controlling and designing rheological characteristics of concentrated charged colloidal suspensions. Herein, we investigate electroviscous effects on shear rheology using highly charged silica particles. By fixing the volume fraction but varying the salinity, the system undergoes a glass transition as evidenced by the evolution of the yield stress and zero-shear viscosity. We show that the steady shear viscosities obey a critical scaling relation that scales the flow curves into a super- and a sub-critical branch with glass transition salinity serving as the bifurcation point; we also demonstrate an isoviscosity scaling that collapses all isoviscosity lines into a single master curve that exhibits no singularity. Based on each scaling relation, in conjunction with common modeling equations, the quantitative relationships between the shear viscosity, stress, and salinity are established. This study demonstrates a new framework to model the steady shear rheology of concentrated charged colloids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unveiling the Structure and Dynamics of Water Confined in Colloidal Boehmite Suspensions

Thin fluid layers confined between nanoparticles play an important role in several natural and industrial systems, including radioactive wastes stored in tanks at the U.S. Department of Energy’s Hanford site. Multimodal neutron and computational approaches have been integrated to examine the properties of one, two, and four layers of water (H 2 O or D 2 O) on nanoparticulate, hydrous, or deuterated boehmite (γ-AlOOH or γ-AlOOD). Exposure of deuterated boehmite to H 2 O at 90 °C yielded rapid H/D isotopic exchange likely driven by a Grotthus-like proton-hopping mechanism. The in-plane and out-of-plane vibrations of the structural hydroxyls involved in this exchange were observed for both the hydrated and deuterated boehmite. These observations were confirmed by molecular dynamics simulations that also showed that single water molecules on the (010) surface bond to the structure via four bonds: two from hydrogens (deuteriums) on the water to surrounding oxygens and two from the water’s oxygen to surrounding OD/OH. Bulk water-like properties began to appear once four monolayers of water had been added, but steric crowding limited water diffusion rates once two monolayers had been added. The super-Arrhenius temperature dependence observed at four monolayers indicated glass-like behavior in a well-formed hydrogen-bonding network. Such a network is not sufficiently developed, however, when the surface water coverage is less than four layers. In conclusion, the unique nature of these layers can provide critical information for understanding forces between particles in proximity, and resultant effects on suspension rheology.

Anovitz, Lawrence M. [Oak Ridge National Laborator↗