Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Cycloidal Wave Energy Converter

This program allowed further advancing the development of a novel type of wave energy converter, a Cycloidal Wave Energy Converter or CycWEC. A CycWEC consists of one or more hydrofoils rotating around a central shaft, and operates fully submerged beneath the water surface. It operates under feedback control sensing the incoming waves, and converts wave power to shaft power directly without any intermediate power take off system. Previous research consisting of numerical simulations and two dimensional small 1:300 scale wave flume experiments had indicated wave cancellation efficiencies beyond 95%. The present work was centered on construction and testing of a 1:10 scale model and conducting two testing campaigns in a three dimensional wave basin. These experiments allowed for the first time for direct measurement of electrical power generated as well as the interaction of the CycWEC in a three dimensional environment. The Atargis team successfully conducted two testing campaigns at the Texas A&M Offshore Technology Research Center and was able to demonstrate electricity generation. In addition, three dimensional wave diffraction results show the ability to achieve wave focusing, thus increasing the amount of wave power that can be extracted beyond what was expected from earlier two dimensional investigations. Numerical results showed wave cancellation efficiencies for irregular waves to be on par with results for regular waves over a wide range of wave lengths. Using the results from previous simulations and experiments a full scale prototype was designed and its performance in a North Atlantic wave climate of average 30kW/m of wave crest was estimated. A full scale WEC with a blade span of 150m will deliver a design power of 5MW at an estimated levelized cost of energy (LCOE) in the range of 10-17 US cents per kWh. Based on the new results achieved in the 1:10 scale experiments these estimates appear conservative and the likely performance at full scale will exceed this initial performance estimates. In advancing the Technology Readiness Level (TRL) of this type of wave energy converter from 3 to 4, we find the CycWEC to exceed our initial estimates in terms of hydrodynamic performance. Once fully developed and optimized, it has the potential to not just outperform all other WEC technologies, but to also deliver power at a lower LCOE than competing conventional renewables like wind and solar. Given the large wave power resource both domestically and internationally, this technology has the potential to lead to a large improvement in our ability to produce clean electricity at affordable cost.

16 TIDAL AND WAVE POWER↗

LEEM investigations of clean surfaces driven by energetic ion beams

he original purpose of this award was to use low-energy electron microscopy (LEEM) to explore the dynamics of surfaces of clean single crystal surfaces when driven by a beam of energetic ions. The goal was to understand the nanoscience of hyperthermal growth, surface erosion by sublimation and irradiation, operation of surface sinks in irradiated materials, diffusion on driven surfaces, and the creation of structural patterns. This project was based on a novel LEEM system constructed by C. P. Flynn, which provided real-time imaging of surface dynamics by scattering low energy electrons. With the passing of Prof. Flynn in late 2011, this project was completed under a slightly different scope by constructing a low-energy, inelastic electron scattering (“EELS”) instrument. Consistent with Flynn’s original objectives for his LEEM system, this device (shown in Fig. 1) probes the dynamics of crystal surfaces. However the measurements are not carried out in real time, but instead are done in the frequency domain, through the energy lost from the probe electrons. The purpose of this device is to study the collective bosonic excitations in a variety of materials, including high temperature superconductors, topological insulators, carbon allotropes including (but not limited to) graphene, etc. The ultimate goal here is to identify the bosons that mediate interactions in these and other materials, with hopes of shedding light on the origin of many exotic phenomena including high temperature superconductivity.

36 MATERIALS SCIENCE↗

Generalized moving least squares vs. radial basis function finite difference methods for approximating surface derivatives

Approximating differential operators defined on two-dimensional surfaces is an important problem that arises in many areas of science and engineering. Over the past ten years, localized meshfree methods based on generalized moving least squares (GMLS) and radial basis function finite differences (RBF-FD) have been shown to be effective for this task as they can give high orders of accuracy at low computational cost, and they can be applied to surfaces defined only by point clouds. However, there have yet to be any studies that perform a direct comparison of these methods for approximating surface differential operators (SDOs). The first purpose of this work is to fill that gap. For this comparison, we focus on an RBF-FD method based on polyharmonic spline kernels and polynomials (PHS+Poly) since they are most closely related to the GMLS method. Additionally, we use a relatively new technique for approximating SDOs with RBF-FD called the tangent plane method since it is simpler than previous techniques and natural to use with PHS+Poly RBF-FD. Further, the second purpose of this work is to relate the tangent plane formulation of SDOs to the local coordinate formulation used in GMLS and to show that they are equivalent when the tangent space to the surface is known exactly. The final purpose is to use ideas from the GMLS SDO formulation to derive a new RBF-FD method for approximating the tangent space for a point cloud surface when it is unknown. For the numerical comparisons of the methods, we examine their convergence rates for approximating the surface gradient, divergence, and Laplacian as the point clouds are refined for various parameter choices. We also compare their efficiency in terms of accuracy per computational cost, both when including and excluding setup costs.

97 MATHEMATICS AND COMPUTING↗

Study of space charge in the ICARUS T600 detector

The accumulation of positive ions, produced by ionizing particles crossing Liquid Argon Time Projection Chambers (LAr-TPCs), may generate distortions of the electric drift field affecting the track reconstruction of the ionizing events. These effects could become relevant for large LAr-TPCs operating at surface or at shallow depth, where the detectors are exposed to a copious flux of cosmic rays. We report a detailed study of such possible field distortions in the ICARUS T600 LAr-TPC has been performed analyzing a sample of cosmic muon tracks recorded with one T600 module operated at surface in 2001. The maximum track distortion turns out to be of few mm in good agreement with the prediction by a numerical calculation. As a cross-check, the same analysis has been performed on a cosmic muon sample recorded during the ICARUS T600 run at the LNGS underground laboratory, where the cosmic ray flux was suppressed by a factor $\sim 10^6$ by 3400 m water equivalent shielding. No appreciable distortion has been observed, confirming that the effects measured on surface are actually due to ion space charge.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Stabilization of Catalytically Active Surface Defects on Ga-doped La–Sr–Mn Perovskites for Improved Solar Thermochemical Generation of Hydrogen

Solar thermochemical hydrogen (STCH) production from water splitting typically requires performing redox cycles at temperatures above 1200 °C to reduce and re-oxidize the bulk of a reversible material. Bulk processes such as oxygen vacancy formation and oxygen diffusion energies dictate the viability of a material for STCH. The surface plays an important role in the formation and destruction of vacancies and interacts with gas phase water and surface adsorbed species. These surface processes can lead to surface reconfigurations and even the formation of surface phases with stoichiometry and oxygen content very different from the bulk composition. Understanding in-situ the surface chemical state and its evolution under water splitting is important to design nonstoichiometric oxides capable of longer-lasting STCH generation at lower temperatures. In this work, we describe the water splitting active defect sites in LSM ((La 0.65 Sr 0.35 ) 0.95 MnO 3–δ ) and Ga-doped LSM ((La 0.6 Sr 0.4 ) 0.95 (Mn 0.8 Ga 0.2 )O 3–δ ) perovskites during Operando thermochemical water splitting conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) experiments at 800 °C under steam. We show that sub-stoichiometric La +3 in the oxygen-vacancy rich surface at operating conditions can be used to correlate surface water splitting activity and the creation of surface hydroxide intermediates. The addition of Ga in LSM is shown to drastically stabilize the surface chemical composition by preventing Sr segregation and stabilizing catalytically active surface defects that promote the binding of adsorbed hydroxides. Here, we use Operando AP-XPS quantification of metastable surface hydroxide intermediates (La(OH) 3 ) to determine the amount of catalytically active surface sites in LSM (2.9%) and in LSMG (7.8–8.1%, depending on the bulk oxidation state).

08 HYDROGEN↗

In Situ and Surface-Enhanced Raman Spectroscopy Study of Electrode Materials in Solid Oxide Fuel Cells

Solid oxide fuel cells (SOFCs) represent next-generation energy sources with high energy conversion efficiencies, low pollutant emissions, good flexibility with a wide variety of fuels, and excellent modularity suitable for distributed power generation. As an electrochemical energy conversion device, the SOFC’s performance and reliability depend sensitively on the catalytic activity and stability of electrode materials. To date, however, the development of electrode materials and microstructures is still based largely on trial-and-error methods because of the inadequate understanding of electrode process mechanisms. Therefore, the identification of key descriptors/properties for electrode materials or functional heterogeneous interfaces, especially under in situ/operando conditions, may provide guidance for the design of optimal electrode materials and microstructures. Here, Raman spectroscopy is ideally suited for the probing and mapping of chemical species present on electrode surfaces under operating conditions. And to boost the sensitivity toward electrode surface species, the surface-enhanced Raman spectroscopy (SERS) technique can be employed, in which thermally robust SERS probes (e.g., Ag@SiO 2 core–shell nanoparticles) are designed to make in situ/operando analysis possible. Furthermore, this review summarizes recent progresses in the investigation of SOFC electrode materials through Raman spectroscopic techniques, including topics of early stage carbon deposition (coking), coking-resistant anode modification, sulfur poisoning, and cathode degradation. In addition, future perspectives for utilizing the in situ/operando SERS for investigations of other electrochemical surfaces and interfaces are also discussed.

25 ENERGY STORAGE↗

Surface working of 304L stainless steel: Impact on microstructure, electrochemical behavior and SCC resistance

The effect of surface working operations on the microstructure, electrochemical behavior and stress corrosion cracking resistance of 304L stainless steel (SS) was investigated in this study. The material was subjected to (a) solution annealing (b) machining and (c) grinding operations. Microstructural characterization was done using stereo microscopy and electron back scattered diffraction (EBSD) technique. The electrochemical nature of the surfaces in machined, ground and solution annealed condition were studied using potentiodynamic polarization and scanning electrochemical microscopy (SECM) in borate buffer solution. The stress corrosion cracking resistance of 304L SS in different conditions was studied by exposing the samples to boiling MgCl{sub 2} environment. Results revealed that the heavy plastic deformation and residual stresses present near the surface due to machining and grinding operations make 304L SS electrochemically more active and susceptible to stress corrosion cracking. Ground sample showed highest magnitude of current density in the passive potential range followed by machined and solution annealed 304L SS. Micro-electrochemical studies established that surface working promotes localized corrosion along the surface asperities which could lead to crack initiation. - Highlights: Black-Right-Pointing-Pointer Machining/grinding produce extensive grain fragmentation near the surface of 304L SS. Black-Right-Pointing-Pointer Machining/grinding result in martensitic transformation near the surface of 304L SS. Black-Right-Pointing-Pointer Machining/grinding drastically reduce the SCC resistance of 304L SS in chloride. Black-Right-Pointing-Pointer Machining/grinding make the surface of 304L SS electrochemically much more active. Black-Right-Pointing-Pointer SECM study reveal that preferential dissolution takes place along surface asperities.

36 MATERIALS SCIENCE↗

Surface Mine, East Interior Lignite Coal, Operations

Based on a compilation of mines, a surface mine for East Interior lignite coal, producing ~6 billion kg of coal per year. Assumes 32.2 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates, LHV=6860 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=EA68BD9B-501B-41EE-8B6B-A558AD3E8CF4

01 COAL, LIGNITE, AND PEAT↗

Surface Mine, Northern Appalachia Bituminous Coal, Operations

Based on a compilation of mines, a surface mine for Northern Appalachia bituminous coal, producing ~6 billion kg of coal per year. Assumes 59.5 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates; LHV=12440 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=6268923D-4E6C-4623-A6AD-D0C359319CC2

01 COAL, LIGNITE, AND PEAT↗

Surface Mine, Rocky Mountain Subbituminous Coal, Operations

Based on a compilation of mines, a surface mine for Rocky Mountain subbituminous coal, producing ~6 billion kg of coal per year. Assumes 27.4 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates, LHV=9400 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=4328B83E-4800-43C2-8562-D211E373A2F6

01 COAL, LIGNITE, AND PEAT↗

Surface Mine, Southern Appalachia Bituminous Coal, Operations

Based on a compilation of mines, a surface mine for Southern Appalachia bituminous coal, producing ~6 billion kg of coal per year. Assumes 24.9 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates; LHV=12760 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=7CDF8A53-8A25-4A12-AFA5-1EE057A039A8

01 COAL, LIGNITE, AND PEAT↗

Surface Mine, Western Montana Subbituminous Coal, Operations

Based on a compilation of mines, a surface mine for Western Montana subbituminous coal, producing ~6 billion kg of coal per year. Assumes 20.0 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates, LHV=10650 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=F7708985-8ACE-4489-A06B-6CA87208E57F

01 COAL, LIGNITE, AND PEAT↗

Surface Mine, Western Wyoming Subbituminous Coal, Operations

Based on a compilation of mines, a surface mine for Western Wyoming subbituminous coal, producing ~6 billion kg of coal per year. Assumes 20.0 scf/short ton coal mine CH4 (CMM) emissions, adjustable CMM capture rates, LHV=9560 Btu/lb. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=7B4A375D-3D47-4E2B-B00D-38EDCC0F6600

01 COAL, LIGNITE, AND PEAT↗

DYNAMIC DEUTERIUM ENRICHMENT IN COMETARY WATER VIA ELEY–RIDEAL REACTIONS

The deuterium-to-hydrogen ratio (D/H) in water found in the coma of Jupiter family comet (JFC) 67P/Churyumov–Gerasimenko was reported to be (5.3 ± 0.7) × 10{sup −4}, the highest among comets and three times the value for other JFCs with an ocean-like ratio. This discrepancy suggests the diverse origins of JFCs and clouds the issue of the origin of Earth’s oceanic water. Here we demonstrate that Eley–Rideal reactions between accelerated water ions and deuterated cometary surface analogs can lead to instantaneous deuterium enrichment in water scattered from the surface. The reaction proceeds with H{sub 2}O{sup +} abstracting adsorbed D atoms, forming an excited H{sub 2}DO* state, which dissociates subsequently to produce energetic HDO. Hydronium ions are also produced readily by the abstraction of H atoms, consistent with H{sub 3}O{sup +} detection and abundance in various comets. Experiments with water isotopologs and kinematic analysis on deuterated platinum surfaces confirmed the dynamic abstraction mechanism. The instantaneous fractionation process is independent of the surface temperature and may operate on the surface of cometary nuclei or dust grains, composed of deuterium-rich silicates and carbonaceous chondrites. The requisite energetic water ions have been detected in the coma of 67P in two populations. This dynamic fractionation process may temporarily increase the water D/H ratio, especially as the comet gets closer to the Sun. The magnitude of the effect depends on the water ion energy-flux and the deuterium content of the exposed cometary surfaces.

79 ASTRONOMY AND ASTROPHYSICS↗

Validating an operational physical method to compute surface radiation from geostationary satellites

We developed models to compute global horizontal irradiance (GHI) and direct normal irradiance (DNI) over the last three decades. These models can be classified as empirical or physical based on the approach. Empirical models relate ground-based observations with satellite measurements and use these relations to compute surface radiation. Physical models consider the physics behind the radiation received at the satellite and create retrievals to estimate surface radiation. Furthermore, while empirical methods have been traditionally used for computing surface radiation for the solar energy industry, the advent of faster computing has made operational physical models viable. The Global Solar Insolation Project (GSIP) is a physical model that computes DNI and GHI using the visible and infrared channel measurements from a weather satellite. GSIP uses a two-stage scheme that first retrieves cloud properties and uses those properties in a radiative transfer model to calculate GHI and DNI. Developed for polar orbiting satellites, GSIP has been adapted to NOAA's Geostationary Operation Environmental Satellite series and can run operationally at high spatial resolutions. Our method holds the possibility of creating high quality datasets of GHI and DNI for use by the solar energy industry. We present an outline of the methodology and results from running the model as well as a validation study using ground-based instruments.

14 SOLAR ENERGY↗

BLOC Site - ASSIST Thermodynamic Retrievals TROPoe v0.18 / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). This is a post-processed dataset and recommended for use. The profiles are retrieved every 10 minutes from instantaneous radiances observed with an Atmospheric Sounder Spectrometer by Infrared Spectral Technology (ASSIST, Michaud-Belleau et al. 2025) operated by NOAA Physical Sciences Laboratory (PSL) on Block Island for WFIP3. The spectral bands used in the retrieval are in the wavenumber range from 612 - 905.4 cm-1 and are specified in Turner and Löhnert (2021). Additional input data in TROPoe are cloud base height from a collocated ceilometer operated by NOAA GML and temperature, water vapor mixing ratio, and pressure from a collocated surface tower operated by NOAA PSL. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at Upton, NY. The TROPoe docker container (version 0.18) is available from Docker Hub at https://hub.docker.com/r/davidturner53/tropoe/tags, and the source code code is available in the GitHub repository https://github.com/OAR-atmospheric-observations/TROPoe.

17 WIND ENERGY↗

NANT Site - ASSIST Thermodynamic Retrievals TROPoe v0.18 / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). This is a post-processed dataset and recommended for use. The profiles are retrieved every 10 minutes from instantaneous radiances observed with an Atmospheric Sounder Spectrometer by Infrared Spectral Technology (ASSIST, Michaud-Belleau et al. 2025) operated by NOAA Physical Sciences Laboratory (PSL) on Nantucket Island for WFIP3. The spectral bands used in the retrieval are in the wavenumber range from 612 - 905.4 cm-1 and are specified in Turner and Löhnert (2021). Additional input data in TROPoe are cloud base height from a collocated ceilometer operated by NOAA GML and temperature, water vapor mixing ratio, and pressure from a collocated surface tower operated by NOAA PSL. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at Upton, NY. The TROPoe docker container (version 0.18) is available from Docker Hub at https://hub.docker.com/r/davidturner53/tropoe/tags, and the source code code is available in the GitHub repository https://github.com/OAR-atmospheric-observations/TROPoe.

17 WIND ENERGY↗