Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sublimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

California-Kepler Survey. IX. Revisiting the Minimum-mass Extrasolar Nebula with Precise Stellar Parameters

We investigate a possible correlation between the solid surface density Σ of the minimum-mass extrasolar nebula (MMEN) and the host star mass M {sub ⋆} and metallicity [Fe/H]. Leveraging on the precise host star properties from the California-Kepler Survey (CKS), we found that Σ=50{sub −20}{sup +33} g cm{sup −2} (a/1 au){sup −1.75±0.07} (M {sub ⋆}/M {sub ⊙}){sup 1.04±0.22} 10{sup 0.22±0.05[Fe/H]} for Kepler-like systems (1–4R {sub ⊕}; a < 1 au). The strong M {sub ⋆} dependence is reminiscent of previous dust continuum results that the solid disk mass scales with M {sub ⋆}. The weaker [Fe/H] dependence shows that sub-Neptune planets, unlike giant planets, form readily in lower metallicity environment. The innermost region (a < 0.1 au) of an MMEN maintains a smooth profile despite a steep decline of planet occurrence rate: a result that favors the truncation of disks by corotating magnetospheres with a range of rotation periods, rather than the sublimation of dust. The Σ of Kepler multitransiting systems shows a much stronger correlation with M {sub ⋆} and [Fe/H] than singles. This suggests that the dynamically hot evolution that produced single systems also partially removed the memory of formation in disks. Radial-velocity planets yielded a MMEN very similar to CKS planets; transit-timing-variation planets’ postulated convergent migration history is supported by their poorly constrained MMEN. We found that lower mass stars have a higher efficiency of forming/retaining planets: for Sun-like stars, about 20% of the solid mass within ∼1 au are converted/preserved as sub-Neptunes, compared to 70% for late-K to early-M stars. This may be due to the lower binary fraction, lower giant-planet occurrence, or the longer disk lifetime of lower mass stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Characterization of the Nucleus, Morphology, and Activity of Interstellar Comet 2I/Borisov by Optical and Near-infrared GROWTH, Apache Point, IRTF, ZTF, and Keck Observations

We present visible and near-infrared (NIR) photometric and spectroscopic observations of interstellar object (ISO) 2I/Borisov taken from 2019 September 10 to 2019 December 20 using the GROWTH, the Apache Point Observatory Astrophysical Research Consortium 3.5 m, and the NASA Infrared Telescope Facility 3.0 m combined with pre- and postdiscovery observations of 2I obtained by the Zwicky Transient Facility from 2019 March 17 to 2019 May 5. Comparison with imaging of distant solar system comets shows an object very similar to mildly active solar system comets with an outgassing rate of ∼10{sup 27} mol s{sup −1}. The photometry, taken in filters spanning the visible and NIR range, shows a gradual brightening trend of ∼0.03 mag day{sup −1} since 2019 September 10 UTC for a reddish object becoming neutral in the NIR. The light curve from recent and prediscovery data reveals a brightness trend suggesting the recent onset of significant H{sub 2}O sublimation with the comet being active with super volatiles such as CO at heliocentric distances >6 au consistent with its extended morphology. Using the advanced capability to significantly reduce the scattered light from the coma enabled by high-resolution NIR images from Keck adaptive optics taken on 2019 October 4, we estimate a diameter for 2I’s nucleus of ≲1.4 km. We use the size estimates of 1I/’Oumuamua and 2I/Borisov to roughly estimate the slope of the ISO size distribution, resulting in a slope of ∼3.4 ± 1.2, similar to solar system comets and bodies produced from collisional equilibrium.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

James Clerk Maxwell Telescope Spectral and Continuum Imaging of Hyperactive Comet 46P/Wirtanen

The Jupiter-family comet (JFC) 46P/Wirtanen passed the Earth at a distance of 0.077 au on 2018 December 16 UT, presenting a rare opportunity to study the chemical structure of its coma. With the James Clerk Maxwell Telescope we achieved a resolution of 800 km, which is smaller than the scale lengths of some distributed cometary molecules at the comet’s heliocentric distance of 1 au. Spectroscopic observations of the J = 4 - 3 transition of HCN showed generally uniform levels of outgassing activity during the observing period, 2018 December 14–20. Gas expansion velocities were ~0.6 km s{sup -1}, and the derived average HCN production rate was 7.4 × 10{sup 24} mol s{sup -1}. HCN and CH{sub 3}OH emissions were detected at least 30" (1600 km) from the nucleus, and the abundances of these species were typical for a JFC. The radial distribution of CH{sub 3}OH is consistent with an extended source of sublimation such as a population of icy grains—cometary halo ice primaries, or CHIPs—as has been invoked previously to explain hyperactivity in comets. The abundance of H{sub 2}CO is normal if it is a daughter species. HNC and CO were not detected, but a sensitive nondetection of CS implies an unusually low CS:H{sub 2}O ratio of <0.02%. The peak brightness of the 850 μm continuum emissions from icy coma dust particles of size ~1 mm fell from (52 ± 6) to (40 ± 3) mJy beam{sup -1} through the week, while the size of the dust coma remained essentially constant, with dust extending to ~1000 km from the nucleus. The total mass of those particles was ~2 × 10{sup 8} kg.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Initial Characterization of Active Transitioning Centaur, P/2019 LD{sub 2} (ATLAS), Using Hubble, Spitzer, ZTF, Keck, Apache Point Observatory, and GROWTH Visible and Infrared Imaging and Spectroscopy

We present visible and mid-infrared imagery and photometry of temporary Jovian co-orbital comet P/2019 LD{sub 2} taken with Hubble Space Telescope/Wide Field Camera 3 (HST/WFC3), Spitzer Space Telescope/Infrared Array Camera (Spitzer/IRAC), and the GROWTH telescope network, visible spectroscopy from Keck/Low-Resolution Imaging Spectrometer (LRIS), and archival Zwicky Transient Facility observations taken between 2019 April and 2020 August. Our observations indicate that the nucleus of LD{sub 2} has a radius between 0.2 and 1.8 km assuming a 0.08 albedo and a coma dominated by ∼100 μm-scale dust ejected at ∼1 m s{sup −1} speeds with a ∼1′ jet pointing in the southwest direction. LD{sub 2} experienced a total dust mass loss of ∼10{sup 8} kg at a loss rate of ∼6 kg s{sup −1} with Afρ/cross section varying between ∼85 cm/125 km{sup 2} and ∼200 cm/310 km{sup 2} from 2019 April 9 to 2019 November 8. If the increase in Afρ/cross section remained constant, it implies LD{sub 2}'s activity began ∼2018 November when within 4.8 au of the Sun, implying the onset of H{sub 2}O sublimation. We measure CO/CO{sub 2} gas production of ≲10{sup 27} mol s{sup −1}/≲10{sup 26} mol s{sup −1} from our 4.5 μm Spitzer observations; g–r = 0.59 ± 0.03, r–i = 0.18 ± 0.05, and i–z = 0.01 ± 0.07 from GROWTH observations; and H{sub 2}O gas production of ≲80 kg s{sup −1} scaling from our estimated C {sub 2} production of Q{sub C{sub 2}}≲7.5×10{sup 24} mol s{sup −1} from Keck/LRIS spectroscopy. We determine that the long-term orbit of LD{sub 2} is similar to Jupiter-family comets having close encounters with Jupiter within ∼0.5 Hill radius in the last ∼3 y and within 0.8 Hill radius in ∼9 y. Additionally, 78.8% of our orbital clones are ejected from the solar system within 1 × 10{sup 6} yr, having a dynamical half-life of 3.4 × 10{sup 5} yr.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

LBT Reveals Large Dust Particles and a High Mass-loss Rate for K2-22 b

The disintegrating planet candidate K2-22 b shows periodic and stochastic transits best explained by an escaping debris cloud. However, the mechanism that creates the debris cloud is unknown. The grain size of the debris as well as its sublimation rate can be helpful in understanding the environment that disintegrates the planet. Here, we present simultaneous photometry with the g band at 0.48 μm and K {sub S} band at 2.1 μm using the Large Binocular Telescope. During an event with very low dust activity, we put a new upper limit on the size of the planet of 0.71 R {sub ⊕} or 4500 km. We also detected a medium depth transit that can be used to constrain the dust particle sizes. We find that the median particle size must be larger than about 0.5–1.0 μm, depending on the composition of the debris. This leads to a high mass-loss rate of about 3 × 10{sup 8} kg s{sup −1}, which is consistent with hydrodynamic escape models. If they are produced by some alternate mechanism such as explosive volcanism, it would require extraordinary geological activity. Combining our upper limits on the planet size with the high mass-loss rate, we find a lifetime of the planet of less than 370 Myr. This drops to just 21 Myr when adopting the 0.02 M {sub ⊕} mass predicted from hydrodynamical models.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Metal Halide Scintillators with Fast and Self‐Absorption‐Free Defect‐Bound Excitonic Radioluminescence for Dynamic X‐Ray Imaging

Abstract Scintillators for radiation detection are of great significance in medical imaging, security, and nondestructive inspection. The current challenge for scintillators is to simultaneously achieve high scintillation light yield, fast radioluminescence, simple film fabrication, large X‐ray attenuation efficiency as well as stable and nontoxic compositions; no previous scintillators fulfill all the above requirements. Here, metal halide Rb 2 AgBr 3 , possessing defect‐bound excitonic radioluminescence, is shown as efficient and fast scintillators. This nontoxic and stable scintillator emits from excitons bound to neutral bromine vacancies, enjoying an efficient and spin‐allowed fast emission with minimized self‐absorption. Rb 2 AgBr 3 thus has a high light yield (25 600 photons MeV −1 ), fast scintillation decay time (5.31 ns), and a record value of light yield versus decay time (4821 photons MeV −1 ns −1 ). The close‐space sublimation method is developed for fast and scalable fabrication of oriented Rb 2 AgBr 3 films. The scintillator film is further integrated with commercial flat‐panel imagers, and the spatial resolution reaches 10.2 line pairs per millimeter at the modulation transfer function of 0.2, doubling the resolution of conventional CsI:Tl flat‐panel detectors. The dynamic X‐ray imaging and its use to real‐time monitoring of bone movement without ghosting effect is also demonstrated.

Zhang, Muyi↗
DOE OSTI2021

Templated Growth and Passivation of Vertically Oriented Antimony Selenide Thin Films for High-Efficiency Solar Cells in Substrate Configuration

Antimony selenide (Sb 2 Se 3 ) is a promising low-cost photovoltaic material with a 1D crystal structure. The grain orientation and defect passivation play a critical role in determining the performance of polycrystalline Sb 2 Se 3 thin-film solar cells. In this work, a seed layer is introduced on a molybdenum (Mo) substrate to template the growth of a vertically oriented, columnar Sb 2 Se 3 absorber layer by closed space sublimation. By controlling the grain orientation and compactness of the Sb 2 Se 3 seeds, obtain high-quality Sb 2 Se 3 absorber layers with passive Sb 2 Se 3 /Mo interfaces is obtained, which in turn improve the transport of photoexcited charge carriers through the absorber layer and its interfaces. Post-deposition annealing of absorber layers in ambient air is further utilized to passivate the defects in Sb 2 Se 3 and enhance the quality of the front heterojunction. As a result of systematic processing optimization, Sb 2 Se 3 planar heterojunction solar cells are fabricated in substrate configuration with a champion power conversion efficiency of 8.5%.

14 SOLAR ENERGY↗
DOE OSTI2024

Ink Casting and 3D‐Extrusion Printing of Yb 14 MnSb 11 for High‐Temperature Thermoelectric Material

Abstract Complex shapes are created from Yb 14 MnSb 11 , a high‐temperature thermoelectric Zintl phase, via a two‐step process: i) layer‐by‐layer 3D‐extrusion of ink containing partially‐reacted powders which are ball‐milled from a blend of Yb, MnSb, and Sb powders; ii) heat treatment to synthesize the ternary compound Yb 14 MnSb 11 and densify the extruded powders. A high phase purity for Yb 14 MnSb 11 (83–94%) is achieved in both cast and 3D‐extruded ink specimens via a solid‐state reaction between Yb, MnSb, and Yb 4 Sb 3 during reactive sintering. Pressure‐free sintering at temperatures of 1200–1400 °C densifies the powders to 82% relative density but can also induce the decomposition of the Yb 14 MnSb 11 phase due to Yb sublimation. A process window with optimized sintering temperature and time is identified, achieving both low porosity and high phase purity and reaching a maximum zT = 0.61 at 1000 °C, about half of the maximum zT value for bulk Yb 14 MnSb 11 made via conventional processes (pressure sintering of precursor powders). The present approach – direct ink writing of ball‐milled powders, combined with reactive sintering – is a scalable and affordable method to fabricate thermoelectric legs with intricate 3D shapes, for enhanced performances in high‐temperature thermoelectric applications.

Chen, Ming [Department of Materials Science &amp, ↗
DOE OSTI2022

Nanoscale Mapping and Defect-Assisted Manipulation of Surface Plasmon Resonances in 2D Bi 2 Te 3 /Sb 2 Te 3 In-Plane Heterostructures

Here, the Bi 2 Te 3 /Sb 2 Te 3 in-plane heterostructure is reported as a low-dimensional tunable chalcogenide well suited as plasmonic building block for the visible-UV spectral range. Electron-driven plasmon excitations of low-dimensional Bi 2 Te 3 /Sb 2 Te 3 are investigated by monochromated electron energy loss spectroscopy spectrum imaging. To resolve the nanoscale spatial distribution of various local plasmonic resonances, singular value decomposition is used to disentangle the spectral data and identify the individual spectral contributions of various corner, edge, and face modes. Furthermore, defect-plasmon interactions are investigated both for nanoscale intrinsic and thermally induced extrinsic polygonal defects (in situ sublimation). Signature of defect-induced red shift ranging from a several hundreds of millielectronvolts to a few electronvolts, broadening of various plasmon response, together with selective enhancement and significant variations in their intensity are detected. This study highlights the presence of a heterointerface and identifies defects as physical tuning pathways to modulate the plasmonic response over a broad spectral range. Finally, the experimental observations are compared qualitatively and validated with numerical simulations using the electron-driven discrete dipole approximation. Low-dimensional Bi 2 Te 3 /Sb 2 Te 3 as a less explored plasmonic system holds great promises as emerging platform for integrated plasmonics. Furthermore, introducing controlled structural defects can open the door for nanoengineering of plasmonic properties in such systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Improved Light Extraction in Organic Light‐Emitting Diodes via Semiconductor Dilution

Increasing the internal light extraction efficiency of organic light‐emitting diodes (OLEDs) is key to improving their performance for solid‐state lighting applications; however, it is challenging to do this in a way that is compatible with high volume manufacturing. Here, it is shown that the outcoupling efficiency of OLEDs can be improved by diluting their hole transport layer (HTL) with the low refractive index material trifluoropropyl oligomeric silsesquioxane (F‐POSS). Specifically, co‐evaporating 40 vol.% F‐POSS in the HTL of single and multi‐stack phosphorescent OLEDs decreases its refractive index by Δ n ≈ 0.2, which in turn yields a ≈12% increase in their outcoupling efficiency with no impact on electrical performance or operational lifetime. This result is significant because F‐POSS is a small molecule that sublimes cleanly, does not aggregate, and is compatible with state‐of‐the‐art HTL materials, making it a realistic path to increase light extraction in commercial OLEDs manufactured on existing production lines.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Long-term shifts in feedbacks among glacier surface change, melt generation and runoff, McMurdo Dry Valleys, Antarctica

Glaciers of the McMurdo dry valleys (MDVs) Antarctica are the main source of streamflow in this polar desert. Because summer air temperatures hover near 0°C small changes in the energy balance strongly affect meltwater generation. In this work, we demonstrate that increased surface roughness, which alters the turbulent transfer of energy between the ice surface and atmosphere, yields a detectable increase in meltwater runoff. At low elevations on the glaciers, basin-like topography became significantly rougher over 13 years between repeat lidar surveys, yielding greater melt. In contrast, the smoother ice at higher elevation exhibited no detectable change in roughness. We pose a conceptual model of the cycle of glacier surface change as a result of climate forcing whereby glacier surfaces transition from being dominated by sublimation to becoming increasingly melt-dominated, which is reversible under prolonged cool periods. This research advances our understanding of warm season effects on polar glaciers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The impact of forest-controlled snow variability on late-season streamflow varies by climatic region and forest structure

Previous studies have documented how forests influence snow at fine spatial scales, but none have documented the influence that existing forest-snow variability has on streamflow. Here to test how much forest-controlled snow variability influences streamflow, a tiling parameterization based on classifications from high-resolution (1–3 m) vegetation maps was incorporated into the Distributed Hydrology and Soil Vegetation Model (DHSVM). Within each grid cell (90–150 m), the tiling parameterization simulated forest-snow variability with four independently evolving snowpacks. Each tile had unique radiation conditions to represent conditions underneath the canopy, in exposed areas, and along north- and south-facing forest edges. This tiled parameterization was used to test where and when detailed forest-snow modelling should be considered further and where and when the impacts are too small to be worth the effort. To test this, tiled model simulations of streamflow were compared to non-tiled model simulations in the Sierra Nevada, CA, the Jemez Mountains, NM, and the Eastern Cascades, WA. In Tuolumne, CA, the tiled model simulated little difference in grid cell average SWE, and late-season streamflow decreased by only 3%–4% compared to the non-tiled model. In Jemez, NM, the tiled model decreased late-season streamflow by 18% due to increased sublimation. In Chiwawa, WA, the tiled model increased late-season streamflow by 15% due to high shortwave radiation attenuation and less longwave radiation enhancement from the forest. Furthermore, within the Chiwawa, a substantial silvicultural practice was synthetically implemented to increase the north-facing edge's fractional area. This silvicultural experiment, which used the same fractional forest area in all simulations increased late-season streamflow by 35% compared to tiled model simulations that did not represent forest edges. In conclusion, representing forest-SWE variability had an effect on late-season streamflow in some watersheds but not in others based on the fractional area of the forest edges, forest characteristics, and climate conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Variability in observed stable water isotopes in snowpack across a mountainous watershed in Colorado

In this study, isotopic information from 81 snowpits was collected over a 5-year period in a large, Colorado watershed. Data spans gradients in elevation, aspect, vegetation, and seasonal climate. They are combined with overlapping campaigns for water isotopes in precipitation and snowmelt, and a land-surface model for detailed estimates of snowfall and climate at sample locations. Snowfall isotopic inputs, describe the majority of δ18O snowpack variability. Aspect is a secondary control, with slightly more enriched conditions on east and north facing slopes. This is attributed to preservation of seasonally enriched snowfall and vapour loss in the early winter. Sublimation, expressed by decreases in snowpack d-excess in comparison to snowfall contributions, increases at low elevation and when seasonal temperature and solar radiation are high. At peak snow accumulation, post-depositional fractionation appears to occur in the top 25 ± 14% of the snowpack due to melt-freeze redistribution of lighter isotopes deeper into the snowpack and vapour loss to the atmosphere during intermittent periods of low relative humidity and high windspeed. Relative depth of fractionation increases when winter daytime temperatures are high and winter precipitation is low. Once isothermal, snowpack isotopic homogenization and enrichment was observed with initial snowmelt isotopically depleted in comparison to snowpack and enriching over time. The rate of δ18O increase (d-excess decrease) in snowmelt was 0.02‰ per day per 100-m elevation loss. Isotopic data suggests elevation dictates snowpack and snowmelt evolution by controlling early snow persistence (or absence), isotopic lapse rates in precipitation and the ratio of energy to snow availability. Hydrologic tracer studies using stable water isotopes in basins of large topographic relief will require adjustment for these elevational controls to properly constrain stream water sourcing from snowmelt.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

TATB thermal decomposition: Expanding the molecular profile with cryo-focused pyrolysis GC-MS

Understanding the molecular composition of high explosives during thermal decomposition is vital for predicting the sensitivity, safety, and performance of explosive materials. The thermal decomposition of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) has been linked to the formation of furazans through a series of dehydration reactions of the NO2 and NH2 groups on the phenyl ring, along with breakdown into small molecules (≤120 amu). Molecular identification of compounds formed in this transformation of the furazans to light gases has been lacking. To address this, we have applied a pseudo-confined sampling system in a cryo-focused pyrolysis gas chromatography-mass spectrometry (pyGC-MS) system to molecularly identify these intermediates. By design, sublimation of TATB, which has complicated MS analyses of thermal degradation, was significantly reduced and additional compounds were identified with potential structural information. In addition to the known furazan compounds, one of these compounds forms from the loss of oxygen from benzo-trifurazan (F3) and produces an open ring structure that may be the first step in the formation of lower molecular weight furazan breakdown products. The loss of a nitro group from benzo-monofurazan (F1) was also discovered and implicates the formation of oxidizing NO2 gas in the thermal decomposition mechanism. So these findings are vital for understanding the proper heat flow from energetic materials on a molecular level, necessary when measuring enthalpy and developing decomposition models based on kinetic parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Single-Filament Imaging Mass Spectrometry Lipidomics in Arthrospira platensis

Elucidating intra-organismal biochemical and lipid organization in photosynthetic biological cell factories of filamentous cyanobacteria, i.e., Arthrospira platensis (Spirulina), is important to track physiological response mechanisms during growth. Little is known about the filaments' biochemical organization and cellular structure and no label-free imaging techniques exist that provide molecular mapping. We applied ultra-high resolution mass spectrometry (7T FT-ICR-MS) matrix-assisted laser desorption ionization (MALDI) imaging to immobilized Spirulina filaments to investigate the localization of lipids across distinct physiological regions. We optimized matrix selection and deposition methods with the goal of facilitating high spatial, and intra-filament, resolution using untargeted multivariate statistical spectral deconvolution across MS pixels. Our results demonstrate an improved two step application with an optimized procedure for intra-organismal lipid profiling to improve analyte sensitivity and achieve higher spatial resolution, whereby we evaluate three conventional matrices 2,5-dihydroxybenzoic acid (DHB), a 9:1 ratio of DHB:superDHB (sDHB), 1,5- diaminonaphthalene (DAN) and a 50:50 mix of DHB:sDHB and compare delineation and pixel-based elucidation of intra-filament lipidomics. We identified a total of 1,626 features that could be putatively assigned a lipid-like formula based on database query and 46 unique features, with associated lipid assignments that were significantly distinct in their intra-filament location. MALDI- imaging MS with untargeted statistical spectral deconvolution was used to visualize intra-filament lipidomics organization in Spirulina filaments. Improvements in matrix deposition, including sequential sublimation and pneumatic spraying, increased signal abundance at high spatial resolution and allowed for identification of distinct lipid composition regions. Here in this work outlines a methodology that may be used for micro-ecological untargeted molecular phenotyping.

09 BIOMASS FUELS↗
DOE OSTI2026

Forming Gas Annealing Improves the Performance of Ex Situ Sb-Doped CdSeTe Thin-Film Solar Cells

Group V doping in cadmium-selenide-telluride (CdSeTe) polycrystalline thin-film solar cells has demonstrated improved power conversion efficiencies (PCEs) and long-term stabilities as compared to the traditional Cu doping in the last decade. The dopants can be successfully incorporated by either in situ or ex situ doping. Here, we report that forming gas (FG) annealing enhances the efficiencies of CdSeTe polycrystalline thin-film solar cells utilizing ex situ antimony (Sb) doping via close-space sublimation of SbCl3 at ambient pressure. The FG annealing increases the hole density and carrier lifetime, reduces the back barrier height, and, therefore, leads to improved open-circuit voltages (VOCs) and fill factors (FFs). The champion device achieves a PCE of 19.2% with a VOC of 877 mV, a current density (JSC) of 30.2 mA/cm2, and an FF of 72.4%. Importantly, the Sb-doped devices showed improved stability under stress tests as compared to Cu-doped devices.

14 SOLAR ENERGY↗
DOE OSTI2021

Thermal impacts on nondestructive analysis measurements of uranium hexafluoride

A series of nondestructive assay measurements were performed before, during, and after localized heating of an industrial standard 12B cylinder of uranium hexafluoride to replicate dose variations previously observed on commercial 30B cylinders. While cylinders represent a closed system, enrichment measurements may be impacted by altered uranium and daughter product distributions due to sublimation. A series of measurements were performed to examine localized heating impacts on dose rates, ratios of uranium and daughter product distributions, and measured 235 U enrichment as calculated by two different approaches. The less complex enrichment meter approaches were found to be more robust and less prone to deviation than isotope ratio approaches such as FRAM, but the impact can be minimized by using observable dose changes to avoid impacted areas.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Evaluation of PbTe and SnTe as Ohmic Contact Layers in CdTe Solar Cell Devices

For solar cells based on CdTe, the choice of a suitable back contact material is limited by CdTe's deep work function. Here, we explored p-type PbTe and SnTe as ohmic contacts to CdTe. These contact layers were grown on single crystal CdTe substrates by molecular beam epitaxy, and the valence band offset between film and substrate was measured using X-ray photoemission spectroscopy. Polycrystalline device structures were also grown by sublimation to assess performance improvements. Doping was achieved in PbTe by thallium incorporation. Only the highest Tl doped PbTe resulted in a desirable band alignment with the CdTe, forming an electron reflector and no hole barrier. Time-resolved photoluminescence measurements also revealed significant photocarrier lifetime improvements for only the highest doped PbTe. Consequentially, devices incorporating the highest doped PbTe layers showed increased power conversion efficiency, primarily from increased fill factor. Doping of the PbTe was measured via Hall effect with variable magnetic field, which was required due to the formation of an n-type parasitic interface layer. To properly interpret the variable field Hall measurements, we derived an expression for the magnetic field-dependent conductivity tensor of an L-valley semiconductor.

anisotropic band valley↗