The hydraulic characteristics of flow through miniature slot orifices
Hydraulic characteristics of flow through miniature slot orifices for rocket engine injectors, observing stability of effluent liquid streams
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hydraulic characteristics of flow through miniature slot orifices for rocket engine injectors, observing stability of effluent liquid streams
The effects of cryogenic temperatures on the mechanical and physical properties of materials are summarized. Heat capacity and thermal conductivity are considered in the context of conservation of liquid nitrogen, thermal stability of the gas stream, and the response time for changes in operating temperature. Particular attention is given to the effects of differential expansion and failure due to thermal fatigue. Factors affecting safety are discussed, including hazards created due to the inadvertent production of liquid oxygen and the physiological effects of exposure to liquid and gaseous nitrogen, such as cold burns and asphyxiation. The preference for using f.c.c. metals at low temperatures is explained in terms of their superior toughness. The limitations on the use of ferritic steels is also considered. Nonmetallic materials are discussed, mainly in the context of their LOX compatibility and their use in the form of foams and fibers as insultants, seals, and fiber reinforced composites.
The effects of cryogenic temperatures on the mechanical and physical properties of materials are summarized. Heat capacity and thermal conductivity are considered in the context of conservation of liquid nitrogen, thermal stability of the gas stream, and the response time for changes in operating temperature. Particular attention is given to the effects of differential expansion and failure due to thermal fatigue. Factors affecting safety are discussed, including hazards created due to the inadvertent production of liquid oxygen and the physiological effects of exposure to liquid and gaseous nitrogen, such as cold burns and asphyxiation. The preference for using f.c.c. metals at low temperatures is explained in terms of their superior toughness. The limitations on the use of ferritic steels is also considered. Nonmetallic materials are discussed, mainly in the context of their LOX compatibility and their use in the form of foams and fibers as insulatants, seals, and fiber reinforced composites.
A quasi-geostrophic, two-layer, beta-plane model is used to study the baroclinic instability characteristics of a zonally inhomogeneous flow. It is assumed that the disturbance varied slowly in the cross-stream direction, and the stability problem was formulated as a 1D initial value problem. Emphasis is placed on determining how the vertically averaged wind, local maximum in vertical wind shear, and length of the locally supercritical region combine to yield local instabilities. Analysis of the local disturbance energetics reveals that, for slowly varying basic states, the baroclinic energy conversion predominates within the locally unstable region. Using calculations of the basic state tendencies, it is shown that the net effect of the local instabilities is to redistribute energy from the baroclinic to the barotropic component of the basic state flow.
Experimental data from spacecraft providing impact penetration rates and cratering for metallic targets is reviewed. Data includes NASA Explorers 16 and 23 and the Pegasus series, the second US-UK satellite Ariel 2, Space Shuttle STS-3 (MFE), recovered surfaces on Solar Max Satellite, The Long Duration Exposure Facility (LDEF) and EuReCa TiCCE. Factors concerning exposure to the environment are considered and, especially, material properties which affect the penetration resistance. Reference to a common material, Aluminum alloy 2024-T3, is effected and the data then compared to define firstly an average impact flux over the period. The data is examined, in the context of possible satellite and space debris growth rates, to determine the constancy of the flux. This also provides strong constraints on the current space debris component. It is found that the impact data are consistent with domination by natural meteoroid sources. Growth rates are not evident within the period 1980-1990 and Eureca TiCCE fluxes in 1993, for particles penetrating foils of around 10 microns thickness, supports the constancy of the flux. At larger dimensions the 1993 Eureca TiCCE fluxes show an 8-fold increase but this is considered not inconsistent with the selective exposure to meteoroid streams of a satellite stabilized in heliocentric co-ordinates for an 11 month period.
The problems of managing and searching large archives of scientific journal articles can potentially be addressed through data mining and statistical techniques matured primarily for quantitative scientific data analysis. A journal paper could be represented by a multivariate descriptor, e.g., the occurrence counts of a number key technical terms or phrases (keywords), perhaps derived from a controlled vocabulary ( e . g . , the American Meteorological Society's Glossary of Meteorology) or bootstrapped from the journal archive itself. With this technique, conventional statistical classification tools can be leveraged to address challenges faced by both scientists and professional societies in knowledge management. For example, cluster analyses can be used to find bundles of "most-related" papers, and address the issue of journal bifurcation (when is a new journal necessary, and what topics should it encompass). Similarly, neural networks can be trained to predict the optimal journal (within a society's collection) in which a newly submitted paper should be published. Comparable techniques could enable very powerful end-user tools for journal searches, all premised on the view of a paper as a data point in a multidimensional descriptor space, e.g.: "find papers most similar to the one I am reading", "build a personalized subscription service, based on the content of the papers I am interested in, rather than preselected keywords", "find suitable reviewers, based on the content of their own published works", etc. Such services may represent the next "quantum leap" beyond the rudimentary search interfaces currently provided to end-users, as well as a compelling value-added component needed to bridge the print-to-digital-medium gap, and help stabilize professional societies' revenue stream during the print-to-digital transition.
Not provided.
The stability of an equilibrium system of two drops suspended from circular holes is examined. The drop surfaces are disconnected surfaces of a connected liquid body. For holes of equal radii and identical pendant drops axisymmetric perturbations are always the most dangerous. The stability region for two identical drops differs considerably from that for a single drop. Loss of stability leads to a transition from a critical system of identical drops to a stable system of axisymmetric non-identical. This system of non-identical drops reaches its own stability limit (to isochoric or non-isochoric paturbations). For non-identical drops, loss of stability results in dripping or streaming from the holes. Critical volumes for non-identical drops have been calculated as functions of the Bond number, B. For unequal hole radii, stability regions have been constructed for a set of hole radius, K. The dependence of critical volumes on K and B is analyzed.
A nonlinear proton distribution function that is an exact stationary solution of the nonlinear Vlasov equation and Maxwell's equations and which supports a single nonlinear transverse Alfven (ion cyclotron) wave that is circularly polarized and nondispersive is proposed for most of the observations during high-speed solar wind streams. This nonlinear distribution removes the strong Alfven wave instability, inconsistent with the persistence of the observed proton distribution functions in high-speed streams, found by the linear stability analysis. Model temperature anisotropies and drift velocities of the two spatially inhomogeneous bi-Maxwellian components are consistent with typical proton velocity distributions measured in high-speed streams at 1 AU. Two derived relations for each of the wave number and the phase velocity of the wave are obeyed within experimental uncertainties by two typical proton measurements. Our model also predicts that the alpha particle bulk flow velocity exceeds the proton particle bulk flow velocity, as is observed.
The stability of the low-frequency waves propagating transverse to the magnetic field of a plasma composed of electrons, protons, and alpha particles with anisotropic electron and ion temperatures is explored. The threshold for the ordinary mode instability and the growth rates have a very strong dependence on the electron temperature anisotropy but have a comparatively weaker dependence on the ion temperature anisotropy, on the relative abundance of helium to hydrogen, and on the relative streaming of two ion species. The threshold for the instability of these low-frequency waves is (m sub e/m sub p) to the 1/2 power times smaller than the one corresponding to high-frequency waves; however, for a relative abundance of helium to hydrogen up to 20% for the relevant known magnetic fields, particle densities, temperatures, and drifts, the solar wind remains below the threshold for this instability.
Although it is widely understood that the collapse of the West Antarctic Ice Sheet (WAIS) would cause a global sea-level rise of 6 m, there continues to be considerable debate about the response of this ice sheet to climate change. The stability of the WAIS, which is characterized by a bed grounded well below sea level, may depend on geologically controlled conditions at the base, which are independent of climate. Ice streams moving up to 750 m/yr disperse material from the interior through to the oceans. As these ice streams tend to buffer the reservoir of slow-moving inland ice from exposure to oceanic degradation, understanding the ice-streaming process is important for evaluating WAIS stability. There is strong evidence that ice streams slide on a lubricating layer of water-saturated till. Development of this basal layer requires both water and easily eroded sediments. Active lithospheric extension may elevate regional heat flux, increase basal melting, and trigger ice streaming. If a geologically defined boundary with a sharp contrast in geothermal flux exists beneath the WAIS, ice streams may only be capable of operating as a buffer over a restricted region. Should ocean waters penetrate beyond this boundary, the ice-stream buffer would disappear, possibly triggering a collapse of the inland ice reservoir. Aerogeophysical evidence for active volcanism and elevated heat flux beneath the WAIS near the critical region where ice streaming begins is presented.
The computation of flows within interconnected, multiple-disk cavities shows strong interaction between the cavities and the power stream. For this reason, simulations of single cavities in such cases are not realistic; the complete, linked configuration must be considered. Unsteady flow fields affect engine stability and can engender power-stream-driven secondary flows that produce local hot spotting or general cavity heating. Further, a concentric whirling rotor produces a circumferential pressure wave, but a statically eccentric whirling rotor produces a radial wave; both waves affect cavity ingestion and the stability of the entire engine. It is strongly suggested that seals be used to enhance turbojet engine stability. Simple devices, such as swirl brakes, honeycomb inserts, and new seal configurations, should be considered. The cost effectiveness of the NASA Lewis Research Center seals program can be expressed in terms of program goals (e.g., the Integrated High-pressure/Temperature Engine Technology (IHPTET) cannot be achieved without such a program), cost (savings to $250 million/1-percent decrease in specific fuel consumption), and indirect benefits (reduction of atmospheric NO(x) and CO2 and reduction of powerplant downtime).
Idaho National Laboratory (INL) and Pacific Northwest National Laboratory (PNNL) are studying a used nuclear fuel reprocessing system that could be used to recycle used nuclear fuel by separating waste fission products from re-useable, valuable uranium that can be used in making new nuclear fuel. This process includes dissolving the mixture of uranium and fission products in a nitric and hydrofluoric acids, then using an organic extraction process to remove and recover the uranium. The waste fission products remain in the acidic aqueous “raffinate” stream.” The fission products in this raffinate waste stream are expected to require stabilization in a vitrified glass waste form for safe disposal. INL and PNNL plan to construct and operate a facility in which to test the performance of the electric melter process that would receive a non-radioactive but chemically similar simulant of this raffinate. This test system will be located at INL in or near Idaho Falls, ID. In the melter, which operates at a temperature of about 1,050 to 1,150oC, the water, nitric acid, and other volatile and semi-volatile materials evolve into an off-gas stream, while the fission products (in this case, non-radioactive simulants of fission products) are melted with glass forming chemicals into a molten glass. Upon cooling, the molten glass provides a durable waste form for long-term disposal. Expressions of interest are requested from companies who would like to receive a request for proposal to design and build this off-gas system. We expect to request proposals and desire to award a contract prior to the end of September 2019.
The construction and development of the multi-component traversing system and associated control hardware and software are presented. A hydrogen bubble/laser sheet flow visualization technique was developed to visually study the characteristics of the mixing layers. With this technique large-scale rollers arising from the Taylor-Gortler instability and its interaction with the primary Kelvin-Helmholtz structures can be studied.
An important supplementary technique for ion mobility spectrometry (IMS) is mass spectrometry (MS). A mass spectrometer coupled to an ion mobility spectrometer (IMS/MS) can provide significant information on the composition of the ions contributing to an ion mobility peak. On the other hand, the interpretation of IMS/MS results requires knowledge of processes which can occur at the pinhole interface. When the ion composition is a mixture of ion clusters, the observed cluster distribution may not be an accurate representation of the ion clusters in the IMS. Depending on the buffer gas, lower clusters can form by equilibrating with reduced concentrations in the continuum regime of the expansion and larger clusters can form by collisional stabilization in the cooled jet stream. Besides water, nitrogen molecules can also add to the ion clusters. Even though nitrogen is non-polar, this addition is made possible by an ion-induced dipole interaction between the ion and molecule.
Electrons accelerated in solar flares are expected to drive a co-spatial return current in the ambient plasma when they escape the acceleration region. This return current maintains plasma neutrality and the stability of the beam of streaming electrons. The electric field that drives this return current also decelerates the energetic electrons in the beam. The corresponding energy loss experienced by the accelerated electrons can affect the observed properties of the X-ray and radio emissions from flares and the evolution of the thermal flare plasma. I will discuss the properties of the flare emissions expected in a classical, steady-state model. As part of this discussion, I will examine Gordon Emslie's 1980 conjecture that return-current losses result in a maximum brightness for the hard X-ray emission from flares.
Antecedent hydrological conditions are recorded through the evolution of dissolved lithium isotope signatures (δ 7 Li) by juxtaposing two storm events in an upland watershed subject to a Mediterranean climate. Discharge and δ 7 Li are negatively correlated in both events,but mean δ 7 Li ratios and associated ranges of variation are distinct between them. We apply a previously developed reactive transport model (RTM) for the site to these event-scale flow perturbations, but observed shifts in stream δ 7 Li are not reproduced. To reconcile the stability of the subsurface solute weathering profile with our observations of dynamic stream δ 7 Li signatures, we couple the RTM to a distribution of fluid transit times that evolve based on storm hydrographs. The approach guides appropriate flux-weighting of fluid from the RTM over a range of flow path lengths, or equivalently fluid residence times. This flux-weighted RTM approach accurately reproduces dynamic storm δ 7 Li-discharge patterns distinguished by the antecedent conditions of the watershed.
The development of high-efficiency catalysts, especially for selective catalytic reduction of NO x with NH 3 (NH 3 –SCR) catalysts, with outstanding low-temperature catalytic reactivity and impressive lifetime remains a great challenge in the field of eliminating vehicle engine exhausts. In this work, we present a novel gas-bubbling-assisted dispersed hybrid nanocrystal-assisted hydrothermal deposition (GBD-HNHD) strategy to fabricate a W@CeZrAlO x catalyst with highly dispersed WO 3 nanocrystals (10 wt %) (W@CZA-HNHD). Compared with the W/CeZrAlO x catalyst prepared with the impregnation method (W@CZA-IM), W@CZA-HNHD not only exhibits highly effective low-temperature deNO x activity (the light-off temperature being lowered 45 °C) but also shows an exceptional stability (100 h time-on-stream testing with seven measurement cycles) and long lifetime (compares well with 135,000 miles). This work not only provides a new route to prepare an advanced catalyst with high loading isolated active sites but also lays a foundation for optimizing the utilization efficiency of the catalytically active species in the practical applications.