Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stellar plasmas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Observation of a reduced-turbulence regime with boron powder injection in a stellarator

Abstract In state-of-the-art stellarators, turbulence is a major cause of the degradation of plasma confinement. To maximize confinement, which eventually determines the amount of nuclear fusion reactions, turbulent transport needs to be reduced. Here we report the observation of a confinement regime in a stellarator plasma that is characterized by increased confinement and reduced turbulent fluctuations. The transition to this regime is driven by the injection of submillimetric boron powder grains into the plasma. With the line-averaged electron density being kept constant, we observe a substantial increase of stored energy and electron and ion temperatures. At the same time, the amplitude of the plasma turbulent fluctuations is halved. While lower frequency fluctuations are damped, higher frequency modes in the range between 100 and 200 kHz are excited. We have observed this regime for different heating schemes, namely with both electron and ion cyclotron resonant radio frequencies and neutral beams, for both directions of the magnetic field and both hydrogen and deuterium plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Simpler optimized stellarators using permanent magnets

Abstract A first-of-a-kind optimized stellarator for confining plasma has been designed and is being constructed with planar circular coils and permanent magnets composed of identical elements. The equilibrium is optimized to be quasi-axisymmetric for good particle confinement. The combination of permanent magnets and planar coils is significantly simpler to construct than fabricating three-dimensionally shaped coils, yet they are able to produce lower helical magnetic ripple than existing devices by two orders of magnitude in ϵ eff 3 / 2 , a characteristic neoclassical transport metric.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Effect of magnetic geometry on the energy partition between ions and electrons in the scrape-off layer of magnetic fusion devices

A universal energy partition mechanism between ions and electrons has been confirmed to exist in the scrape-off layer of both the WEST tokamak and the W7-X stellarator. A peaked plasma density structure induced by an infinite magnetic connection length structure is observed to destroy this dependence and enhance the local ion and electron temperature ratio in the stellarator. Here, a theoretical analysis reveals that the ratio of ion and electron parallel heat conduction is predominant in determining this universality, while electrons would further be cooled in the density-peaked region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Nonlinear magnetohydrodynamic modeling of ideal ballooning modes in high- β Wendelstein 7-X plasmas

We present nonlinear magnetohydrodynamic (MHD) simulations of high- β Wendelstein 7-X plasmas using the stellarator extension of the M3D- C 1 code, building on the recent work that shows benign saturation of ideal ballooning modes above the designed β limit in the standard configuration [Zhou et al., Phys. Rev. Lett. 133, 135102 (2024)]. First, we examine the results' sensitivity to the parallel thermal conductivity. It is found that while an increased parallel conductivity reduces the linear growth rate, the saturated pressure profile is barely affected. Second, we consider the dependence on the profile shape. It is shown that an equilibrium with a peaked pressure profile and lower β is subject to more significant change than a broad profile with higher β and a larger growth rate, suggesting that benign saturation, or nonlinear stability, is not guaranteed and not dictated by linear growth. Third, we study the influence of the magnetic configuration, with the equilibrium rotational transform varied by adjusting the planar coil current. With similar growth rates, similar magnitudes of profile change are found regardless of the presence of a low-order resonance, which implies that the saturation mechanism is not specific to a resonant or non-resonant mode. These results indicate that MHD stability should still be treated seriously in stellarator operation and design, for which nonlinear modeling using tools like M3D- C 1 can play an instrumental role.

Zhou, Yao [Shanghai Jiao Tong University (China)] ↗
DOE OSTI2021

High-performance ECRH at W7-X: experience and perspectives

The second operation phase of W7-X (OP1.2) showed the potential of exclusively electron cyclotron resonance heating (ECRH)-sustained plasma operations in stellarators. Employing multi-pass ECRH scenario in the second harmonic O-mode (O2-ECRH), stationary densities of up to 1.4 × 10 20 m -3 could be achieved. This scenario also made stationary divertor detachment possible, which is a reactor-relevant scenario for power and particle exhaust. At high densities and with sufficiently high density gradients for an improved ion confinement, the coupling between the electrons and ions was strong enough to bring the ion temperature to values above 3 keV and to the neoclassical limit for some magnetic configurations, thus enabling to test the W7-X neoclassical optimization. The planned enhancement of the ECRH performance will enable to advance towards reactor-relevant beta values and to investigate their stability and confinement of fast particles, which is a priority goal of W7-X.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Demonstration of reduced neoclassical energy transport in Wendelstein 7-X

Research on magnetic confinement of high-temperature plasmas has the ultimate goal of harnessing nuclear fusion for the production of electricity. Although the tokamak is the leading toroidal magnetic-confinement concept, it is not without shortcomings and the fusion community has therefore also pursued alternative concepts such as the stellarator. Unlike axisymmetric tokamaks, stellarators possess a three-dimensional (3D) magnetic field geometry. The availability of this additional dimension opens up an extensive configuration space for computational optimization of both the field geometry itself and the current-carrying coils that produce it. Such an optimization was undertaken in designing Wendelstein 7-X (W7-X), a large helical-axis advanced stellarator (HELIAS), which began operation in 2015 at Greifswald, Germany. A major drawback of 3D magnetic field geometry, however, is that it introduces a strong temperature dependence into the stellarator’s non-turbulent ‘neoclassical’ energy transport. Indeed, such energy losses will become prohibitive in high-temperature reactor plasmas unless a strong reduction of the geometrical factor associated with this transport can be achieved; such a reduction was therefore a principal goal of the design of W7-X. In spite of the modest heating power currently available, W7-X has already been able to achieve high-temperature plasma conditions during its 2017 and 2018 experimental campaigns, producing record values of the fusion triple product for such stellarator plasmas. The triple product of plasma density, ion temperature and energy confinement time is used in fusion research as a figure of merit, as it must attain a certain threshold value before net-energy-producing operation of a reactor becomes possible. Here we demonstrate that such record values provide evidence for reduced neoclassical energy transport in W7-X, as the plasma profiles that produced these results could not have been obtained in stellarators lacking a comparably high level of neoclassical optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A tutorial on radio frequency sheath physics for magnetically confined fusion devices

Radio frequency (RF) sheaths occur under a wide variety of conditions when RF waves, material surfaces and plasma coexist. RF sheaths are of special importance in describing the interaction of ion cyclotron range of frequency (ICRF) waves with the boundary plasma in tokamaks, stellarators and other magnetic confinement devices. In this article the basic physics of RF sheaths is discussed in the context of magnetic fusion research. Techniques for modelling RF sheaths, their interaction with RF wave fields and the resulting consequences are highlighted. The article is intended as a guide for the early-career ICRF researcher, but it may equally well serve to provide an overview of basic RF sheath concepts and modelling directions for any interested fusion scientist.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Metastability of stratified magnetohydrostatic equilibria and their relaxation

Motivated by explosive releases of energy in fusion, space and astrophysical plasmas, we consider the nonlinear stability of stratified magnetohydrodynamic equilibria against two-dimensional interchanges of straight magnetic-flux tubes. We demonstrate that, even within this restricted class of dynamics, the linear stability of an equilibrium does not guarantee its nonlinear stability: equilibria can be metastable. We show that the minimum-energy state accessible to a metastable equilibrium under non-diffusive two-dimensional dynamics can be found by solving a combinatorial optimisation problem. These minimum-energy states are, to good approximation, the final states reached by our simulations of destabilised metastable equilibria for which turbulent mixing is suppressed by viscosity. To predict the result of fully turbulent relaxation, we construct a statistical mechanical theory based on the maximisation of Boltzmann's mixing entropy. This theory is analogous to the Lynden-Bell statistical mechanics of collisionless stellar systems and plasma, and to the Robert–Sommeria–Miller theory of two-dimensional vortex turbulence. Our theory reproduces well the results of our numerical simulations for sufficiently large perturbations to the metastable equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Primary yields of protons measured using CR-39 in laser-induced deuteron–deuteron fusion reactions

The deuteron and deuteron (DD) fusion reactions is the most crucial reaction in the nuclear astrophysics and inertial confinement fusion, which is responsible for synthesizing chemical elements, and for powering the stellar evolution. The plasma environment generated by the high-intensity laser used in a DD fusion reaction is similar to the early stage of the Big Bang. Therefore, it is important to study laser-induced DD fusion reactions. Recently, we experimentally investigated such reactions using eight laser beams with the third harmonic impact on a deuterated polyethylene target at the ShenGuang-II Upgrade facility. In this work, we focused on the application of range-filter spectrometers assembled from a 70 μm aluminum filter and two CR-39 nuclear track detectors to measure the yields of primary DD protons. Based on the track diameter calibration results of 3 MeV protons used to diagnose the tracks on the range- filter spectrometers, we measured a primary DD proton yield of approximately (8:52 ± 1:7) × 10 6 , consistent with the yields from similar laser facilities worldwide, indicating that range-filter spectrometry is an effective way to measure primary DD protons. Furthermore, using other accurate detectors may help to measure the rare events of D 3 He protons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

GX: a GPU-native gyrokinetic turbulence code for tokamak and stellarator design

GX is a code designed to solve the nonlinear gyrokinetic system for low-frequency turbulence in magnetized plasmas, particularly tokamaks and stellarators. In GX, our primary motivation and target is a fast gyrokinetic solver that can be used for fusion reactor design and optimization along with wide-ranging physics exploration. Here, this has led to several code and algorithm design decisions, specifically chosen to prioritize time to solution. First, we have used a discretization algorithm that is pseudospectral in the entire phase space, including a Laguerre–Hermite pseudospectral formulation of velocity space, which allows for smooth interpolation between coarse gyrofluid-like resolutions and finer conventional gyrokinetic resolutions and efficient evaluation of a model collision operator. Additionally, we have built GX to natively target graphics processors (GPUs), which are among the fastest computational platforms available today. Finally, we have taken advantage of the reactor-relevant limit of small $\rho _*$ by using the radially local flux-tube approach. In this paper we present details about the gyrokinetic system and the numerical algorithms used in GX to solve the system. We then present several numerical benchmarks against established gyrokinetic codes in both tokamak and stellarator magnetic geometries to verify that GX correctly simulates gyrokinetic turbulence in the small $\rho _*$. Moreover, we show that the convergence properties of the Laguerre–Hermite spectral velocity formulation are quite favourable for nonlinear problems of interest. Coupled with GPU acceleration, which we also investigate with scaling studies, this enables GX to be able to produce useful turbulence simulations in minutes on one (or a few) GPUs and higher fidelity results in a few hours using several GPUs. GX is open-source software that is ready for fusion reactor design studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Optimization of quasi-axisymmetric stellarators with varied elongation

An optimization study of Quasi-Axisymmetric (QA) stellarators with varied elongation has been carried out using the optimization code STELLOPT. The starting point of our optimization is a previously obtained QA stellarator with 3 field periods and aspect ratio of 6. Here, a series of QA stellarators are obtained at zero plasma beta with varied elongation value ranging from 2.5 to 3.7. Good quasi-symmetry is kept when the elongation value is reduced from the original value of 3.7. The rotational transform profile and aspect ratio are kept fixed. The plasma volume is ether kept fixed or varied linearly with elongation. Furthermore, finite beta QA stellarators are considered. The corresponding bootstrap currents are calculated using the kinetic code SFINCS. A series of kink-stable QA stellarators are obtained via optimization with varied plasma beta up to 5% and self-consistent bootstrap current. This work demonstrates that good QA stellarators with finite beta and varied elongation exist that are stable to external kink modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Efficient analysis of magnetic field line behavior in toroidal plasmas

The confinement of plasmas in tokamaks and stellarators depends on magnetic field lines lying in nested toroidal surfaces. The transition near the plasma edge away from the lines lying in magnetic surfaces defines properties of divertors. The transition in time defines properties of disruptions. Divertor design and disruption analyses require a detailed understanding of these transitions. The use of a Fourier transform coupled with a Gaussian window function allows far more information to be extracted about these transitions using far shorter field line integrations than can be obtained using traditional methods based on Poincaré plots. The physics of divertors and disruptions is reviewed to clarify why the type of information that can be gained from more efficient methods of analysis is of central importance to the fusion program based on magnetic confinement.

Boozer, Allen H. [Columbia Univ., New York, NY (Un↗
DOE OSTI2024

Modeling of Macroscopic Dynamics in Three-Dimensional Plasma Configurations (Final Technical Report)

A numerical simulation-based study to investigate the stability properties of inherently three-dimensional plasma magnetic configurations is presented. These configurations, called stellarators and heliotrons, use external helical coils to provide the twisting magnetic field that is required to confine ionized plasma particles. In contrast to the tokamak configuration, which nominally has the property of axisymmetry, electrical current does not need to be induced in stellarator and heliotron plasma. Experiments have shown that these three-dimensional configurations are remarkably robust to macroscopic instability, even when driven to relatively high levels of plasma pressure. Our understanding of how the plasma is able to withstand macroscopic instability will be enhanced by the work proposed here. The effort will generalize existing numerical modeling capability, and it will apply the new capability to model macroscopic dynamics in these three-dimensional configurations. The development work has been applied to the NIMROD simulation code (https://nimrodteam.org) that was originally based on axisymmetric problem domains. It has been generalized to accommodate the three-dimensional shaping of the plasma volume in stellarators and heliotrons. Its use of equilibrium data has also been generalized, and the implementation allows different numerical representation of the magnetic field. Analysis has been performed to inform the selection of numerical methods, and a method to accelerate the iterative solution of the necessary algebraic systems has been developed and implemented. Verification of the new NIMSTELL code on benchmark problems has also been an important part of the effort.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

The inertial confinement fusion experimental platform and diagnostics for studies of nuclear reactions relevant to nuclear astrophysics

High energy density plasmas generated in laser-driven inertial confinement fusion implosions provide unparalleled laboratory conditions for studying stellar-relevant nuclear reactions: plasma environment; hot and dense; uniquely high achievable neutron flux. These experiments have the potential to address long-standing questions about plasma effects on nuclear reactions hitherto experimentally inaccessible, including nuclear rates with thermally distributed reactants, plasma screening, and reactions involving nuclei in excited states. The National Ignition Facility (NIF) and OMEGA lasers are two primary facilities for executing experiments of this type. Existing and future nuclear diagnostics, along with supporting diagnostics to characterize the platform, enable exploitation of these plasmas for such nuclear astrophysics-relevant experiments. Here, this review describes the nuclear diagnostic capabilities currently available for these types of experiments at the NIF and OMEGA, including neutron time-of-flight spectrometers, charged-particle detectors, gamma detectors and radiochemistry diagnostics, and briefly summarizes other available diagnostic capabilities used for platform characterization. Enabling tools not yet available are also identified, including a rapid radioactive sample retrieval system, a low-energy neutron spectrometer and a high-efficiency gamma spectrometer.

National Ignition Facility↗
DOE OSTI2025

A framework for discrete optimization of stellarator coils

Designing magnets for three-dimensional plasma confinement is a key task for advancing the stellarator as a fusion reactor concept. Stellarator magnets must produce an accurate field while leaving adequate room for other components and being reasonably simple to construct and assemble. In this paper, a framework for coil design and optimization is introduced that enables the attainment of sparse magnet solutions with arbitrary restrictions on where coils may be located. The solution space is formulated as a 'wireframe' consisting of a mesh of interconnected wire segments enclosing the plasma. Two methods are developed for optimizing the current distribution on a wireframe: Regularized Constrained Least Squares, which uses a linear least-squares approach to optimize the currents in each segment, and Greedy Stellarator Coil Optimization, a fully discrete procedure in which loops of current are added to the mesh one by one to achieve the desired magnetic field on the plasma boundary. Examples are presented of solutions obtainable with each method, some of which achieve high field accuracy while obeying spatial constraints that permit easy assembly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Routes to high-performance operation in Wendelstein 7-X: turbulence suppression with shaping of the density profile

Steep density gradients generally lead to improved plasma performance in the neoclassically optimized stellarator W7-X. This is evident in the global energy confinement time as well as in the ion temperature and can be explained by a strong reduction of the ion temperature gradient turbulence. Such conditions can experimentally be realized by several methods: injection of cryogenic hydrogen pellets, appropriate combination of neutral beam and electron cyclotron resonance heating (ECRH) and, in some cases, with low power of ECRH after preconditioning of the first wall. The duration of the improved phases is determined by the ability to sustain the steep density gradient, by technical limitations of the involved systems and, eventually, by the plasma stability. This paper gives an overview of relevant experimental results and presents example discharges where the improved confinement conditions could be extended to multiple seconds: up to 4 s using neutral beam injection and from 14 to 40 s with steady state pellet injection. In these plasmas the turbulent thermal diffusivity is reduced by a factor of 3 to 4 in a broad radial range, which allows high ion temperatures of up to 3 keV at the densities of about 1.5 • 10 20 m −3 .

high performance plasma↗
DOE OSTI2021

Mode spectrum characteristics and onset of the low-shear MHD stability regime

Equilibria with extended regions of weak magnetic shear, including some tokamak scenarios and stellarators, can be susceptible to pressure-driven internal MHD instabilities even though there is no mode rational surface in the plasma. Nonresonant modes, in particular, can have properties that are unattractive for confinement, including displacing substantial volumes of the plasma and leading to more efficient pressure gradient flattening in the nonlinear regime. The onset and linear properties of the low shear stability regime are examined using the initial-value, extended-MHD code M3D-C. For monotonic q-profiles, we demonstrate a clear correlation between the convergents associated with the continued fraction representation of q 0 and the spectrum of unstable modes. Nonresonant modes are observed to be destabilized preferentially to any other resonant instability with the same toroidal mode number when n > 1. Using the observed connection between the spectrum associated with q 0 and the overall equilibrium stability properties, we suggest a technique for reducing the uncertainty on both q 0 and magnetic shear in the core region, obtained either via measurement or through the analysis and reconstruction of experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Plasma image classification using cosine similarity constrained convolutional neural network

Plasma jets are widely investigated both in the laboratory and in nature. Astrophysical objects such as black holes, active galactic nuclei and young stellar objects commonly emit plasma jets in various forms. With the availability of data from plasma jet experiments resembling astrophysical plasma jets, classification of such data would potentially aid in not only investigating the underlying physics of the experiments but also the study of astrophysical jets. In this work we use deep learning to process all of the laboratory plasma images from the Caltech Spheromak Experiment spanning two decades. We found that cosine similarity can aid in feature selection, classify images through comparison of feature vector direction and be used as a loss function for the training of AlexNet for plasma image classification. We also develop a simple vector direction comparison algorithm for binary and multi-class classification. Using our algorithm we demonstrate 93 % accurate binary classification to distinguish unstable columns from stable columns and 92 % accurate five-way classification of a small, labelled data set which includes three classes corresponding to varying levels of kink instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗