Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “statistical distributions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Analysis of temperature-dependent neutron transmission and self-indication measurements on tantalum at 2-keV neutron energy

The method of pseudo-resonance cross sections is used to analyze published temperature-dependent neutron transmission and self-indication measurements on tantalum in the unresolved region. In the energy region analyzed, 1825.0 to 2017.0 eV, a direct application of the pseudo-resonance approach using a customary average strength function will not provide effective cross sections which fit the measured cross section behavior. Rather a local value of the strength function is required, and a set of resonances which model the measured behavior of the effective cross sections is derived. This derived set of resonance parameters adequately represents the observed resonance hehavior in this local energy region. Similar analyses for the measurements in other unresolved energy regions are necessary to obtain local resonance parameters for improved reactor calculations. This study suggests that Doppler coefficients calculated by sampling from grand average statistical distributions over the entire unresolved resonance region can be in error, since significant local variations in the statistical distributions are not taken into consideration.

Semler, T. T.↗
DOE OSTI2012

Non-statistical simulations for neutral beam spectroscopy in fusion plasmas

While most of the existing models for calculation of neutral beam emission and attenuation in a fusion plasma assume a statistical distribution of population for the excited states of the beam, the observed motional Stark effect data reveal significant deviations from the statistical predictions. To address this problem, we developed a new collisional-radiative model based on the parabolic states which are the true eigenstates of a hydrogen atom in an induced electric field. This model is completely resolved in the magnetic quantum numbers up to n=10 without any assumption of a statistical distribution. Calculation of collisional cross sections between the parabolic states is based on the atomic-orbital close coupling and Glauber approximations for density matrix elements. Our simulations show excellent agreement with the experimental data from the JET tokamak and also can be used to define the limits for the application of statistical approximation.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS2014

A Multiscale Progressive Failure Modeling Methodology for Composites that Includes Fiber Strength Stochastics

A multiscale modeling methodology was developed for continuous fiber composites that incorporates a statistical distribution of fiber strengths into coupled multiscale micromechanics/finite element (FE) analyses. A modified two-parameter Weibull cumulative distribution function, which accounts for the effect of fiber length on the probability of failure, was used to characterize the statistical distribution of fiber strengths. A parametric study using the NASA Micromechanics Analysis Code with the Generalized Method of Cells (MAC/GMC) was performed to assess the effect of variable fiber strengths on local composite failure within a repeating unit cell (RUC) and subsequent global failure. The NASA code FEAMAC and the ABAQUS finite element solver were used to analyze the progressive failure of a unidirectional SCS-6/TIMETAL 21S metal matrix composite tensile dogbone specimen at 650 degC. Multiscale progressive failure analyses were performed to quantify the effect of spatially varying fiber strengths on the RUC-averaged and global stress-strain responses and failure. The ultimate composite strengths and distribution of failure locations (predominately within the gage section) reasonably matched the experimentally observed failure behavior. The predicted composite failure behavior suggests that use of macroscale models that exploit global geometric symmetries are inappropriate for cases where the actual distribution of local fiber strengths displays no such symmetries. This issue has not received much attention in the literature. Moreover, the model discretization at a specific length scale can have a profound effect on the computational costs associated with multiscale simulations.models that yield accurate yet tractable results.

Generalized Method of Cells↗
NASA NTRS2008

The Integrated Medical Model: Statistical Forecasting of Risks to Crew Health and Mission Success

The Integrated Medical Model (IMM) helps capture and use organizational knowledge across the space medicine, training, operations, engineering, and research domains. The IMM uses this domain knowledge in the context of a mission and crew profile to forecast crew health and mission success risks. The IMM is most helpful in comparing the risk of two or more mission profiles, not as a tool for predicting absolute risk. The process of building the IMM adheres to Probability Risk Assessment (PRA) techniques described in NASA Procedural Requirement (NPR) 8705.5, and uses current evidence-based information to establish a defensible position for making decisions that help ensure crew health and mission success. The IMM quantitatively describes the following input parameters: 1) medical conditions and likelihood, 2) mission duration, 3) vehicle environment, 4) crew attributes (e.g. age, sex), 5) crew activities (e.g. EVA's, Lunar excursions), 6) diagnosis and treatment protocols (e.g. medical equipment, consumables pharmaceuticals), and 7) Crew Medical Officer (CMO) training effectiveness. It is worth reiterating that the IMM uses the data sets above as inputs. Many other risk management efforts stop at determining only likelihood. The IMM is unique in that it models not only likelihood, but risk mitigations, as well as subsequent clinical outcomes based on those mitigations. Once the mathematical relationships among the above parameters are established, the IMM uses a Monte Carlo simulation technique (a random sampling of the inputs as described by their statistical distribution) to determine the probable outcomes. Because the IMM is a stochastic model (i.e. the input parameters are represented by various statistical distributions depending on the data type), when the mission is simulated 10-50,000 times with a given set of medical capabilities (risk mitigations), a prediction of the most probable outcomes can be generated. For each mission, the IMM tracks which conditions occurred and decrements the pharmaceuticals and supplies required to diagnose and treat these medical conditions. If supplies are depleted, then the medical condition goes untreated, and crew and mission risk increase. The IMM currently models approximately 30 medical conditions. By the end of FY2008, the IMM will be modeling over 100 medical conditions, approximately 60 of which have been recorded to have occurred during short and long space missions.

Fitts, M. A.↗
DOE OSTI2022

Device and methods for determination of molecular weight distributions of polymers and distributions of other polymer properties without physical separation

Devices and methods for determining the cumulative distribution of a polymer property in a reactor without physical separation of reaction subcomponents. The device includes a means of measuring an instantaneous property of the polymers being produced in a reaction vessel a plurality of times during a polymerization reaction as well as a means of determining the corresponding change in polymer concentration in the reaction vessel between measurements of the instantaneous polymer property The device also includes a means of computing a statistical distribution appropriate to the polymer characteristic and applying the statistical distribution to a recently measured instantaneous value of the polymer property so as to have an instantaneous distribution of the polymer property and a means of adding together the instantaneous distributions of the polymer property in order to obtain the cumulative distribution of the polymer property in the reactor.

Reed, Wayne Frederick↗
DOE OSTI2024

Device and methods for determination of molecular weight distributions of polymers and distributions of other polymer properties without physical separation

Devices and methods for determining the cumulative distribution of a polymer property in a reactor without physical separation of reaction subcomponents. The device includes a means of measuring an instantaneous property of the polymers being produced in a reaction vessel a plurality of times during a polymerization reaction as well as a means of determining the corresponding change in polymer concentration in the reaction vessel between measurements of the instantaneous polymer property. The device also includes a means of computing a statistical distribution appropriate to the polymer characteristic and applying the statistical distribution to a recently measured instantaneous value of the polymer property so as to have an instantaneous distribution of the polymer property and a means of adding together the instantaneous distributions of the polymer property in order to obtain the cumulative distribution of the polymer property in the reactor.

Reed, Wayne Frederick↗
DOE OSTI2015

Calculating uncertainty on K-effective with MONK10 - 14583

Criticality safety assessments require a demonstration that a particular configuration of fissile material has an adequate sub-critical margin (k-effective sufficiently below unity) to ensure that the risk of criticality under normal operation and accident conditions is acceptable. The required sub-critical margin depends upon the uncertainty in the estimated value of k-effective. The uncertainty in the calculated value of k-effective arises from a number of sources, including: manufacturing tolerances on input data to the code (affecting geometry, compositions and densities), uncertainty in the nuclear data used by the code, stochastic uncertainty resulting from Monte Carlo simulation and modelling approximations/errors, including the inevitable bugs in the software. The ANSWERS Software Service, in collaboration with industrial partners, is developing a number of techniques to better understand and quantify uncertainty on predicted values of k-effective, using MONK. The SPRUCE utility code has been developed to allow uncertainty to be estimated using sampling methods. This can include the sampling of input parameters (including dimensions, compositions and densities) from statistical distributions. It can also include sampling different nuclear data libraries. A set of nuclear data libraries has been generated for this purpose by sampling from statistical distributions that represent the uncertainties in the published nuclear data evaluated files; a set of libraries has been produced for Latin Hypercube Sampling. By varying the input data and nuclear data, separate and combined uncertainties due to manufacturing tolerances and nuclear data can be derived. By performing least squares fitting on the results it is also possible to estimate the contribution of each of the uncertain inputs and a sensitivity method in MONK can break down the nuclear data uncertainty. (authors)

42 ENGINEERING↗
NASA NTRS1980

An experimental study of the surface elevation probability distribution and statistics of wind-generated waves

Laboratory experiments were performed to measure the surface elevation probability density function and associated statistical properties for a wind-generated wave field. The laboratory data along with some limited field data were compared. The statistical properties of the surface elevation were processed for comparison with the results derived from the Longuet-Higgins (1963) theory. It is found that, even for the highly non-Gaussian cases, the distribution function proposed by Longuet-Higgins still gives good approximations.

Huang, N. E.↗
DOE OSTI2021

Bayesian analysis for estimating statistical parameter distributions of elasto-viscoplastic material models

High temperature design methods rely on constitutive models for inelastic deformation and failure typically calibrated against the mean of experimental data without considering the associated scatter. Variability may arise from the experimental data acquisition process, from heat-to-heat material property variations, or both and need to be accurately captured to predict parameter bounds leading to efficient component design. Applying the Bayesian Markov Chain Monte Carlo (MCMC) method to produce statistical models capturing the underlying uncertainty in the experimental data is an area of ongoing research interest. This work varies aspects of the Bayesian MCMC method and explores their effect on the posterior parameter distributions for a uniaxial elasto-viscoplastic damage model using synthetically generated reference data. From our analysis with the uniaxial inelastic model we determine that an informed prior distribution including different types of test conditions results in more accurate posterior parameter distributions. The parameter posterior distributions, however, do not improve when increasing the number of similar experimental data. Additionally, changing the amount of scatter in the data affects the quality of the posterior distributions, especially for the less sensitive model parameters. Moreover, we perform a sensitivity study of the model parameters against the likelihood function prior to the Bayesian analysis. The results of the sensitivity analysis help to determine the reliability of the posterior distributions and reduce the dimensionality of the problem by fixing the insensitive parameters. The comprehensive study described in this work demonstrates how to efficiently apply the Bayesian MCMC methodology to capture parameter uncertainties in high temperature inelastic material models. Quantifying these uncertainties in inelastic models will improve high temperature engineering design practices and lead to safer, more effective component designs.

42 ENGINEERING↗
NASA NTRS1986

A method for developing design diagrams for ceramic and glass materials using fatigue data

The service lifetime of glass and ceramic materials can be expressed as a plot of time-to-failure versus applied stress whose plot is parametric in percent probability of failure. This type of plot is called a design diagram. Confidence interval estimates for such plots depend on the type of test that is used to generate the data, on assumptions made concerning the statistical distribution of the test results, and on the type of analysis used. This report outlines the development of design diagrams for glass and ceramic materials in engineering terms using static or dynamic fatigue tests, assuming either no particular statistical distribution of test results or a Weibull distribution and using either median value or homologous ratio analysis of the test results.

Heslin, T. M.↗
NASA NTRS2006

Statistical Analyses of Satellite Cloud Object Data from CERES: Tropical Convective Cloud Objects During 1998 El Nino and Validation of the Fixed Anvil Temperature Hypothesis - Part II

Characteristics of tropical deep convective cloud objects observed over the tropical Pacific during January-August 1998 are examined using the Tropical Rainfall Measuring Mission/ Clouds and the Earth s Radiant Energy System single scanner footprint (SSF) data. These characteristics include the frequencies of occurrence and statistical distributions of cloud physical properties. Their variations with cloud-object size, sea surface temperature (SST), and satellite precessing cycle are analyzed in detail. A cloud object is defined as a contiguous patch of the Earth composed of satellite footprints within a single dominant cloud-system type. It is found that statistical distributions of cloud physical properties are significantly different among three size categories of cloud objects with equivalent diameters of 100 - 150 km (small), 150 - 300 km (medium), and > 300 km (large), respectively, except for the distributions of ice particle size. The distributions for the larger-size category of cloud objects are more skewed towards high SSTs, high cloud tops, low cloud-top temperature, large ice water path, high cloud optical depth, low outgoing longwave (LW) radiation, and high albedo than the smaller-size category. As SST varied from one satellite precessing cycle to another, the changes in macrophysical properties of cloud objects over the entire tropical Pacific were small for the large-size category of cloud objects, relative to those of the small- and medium-size categories. This result suggests that the fixed anvil temperature hypothesis of Hartmann and Larson may be valid for the large-size category. Combining with the result that a higher percentage of the large-size category of cloud objects occurs during higher SST subperiods, this implies that macrophysical properties of cloud objects would be less sensitive to further warming of the climate. On the other hand, when cloud objects are classified according to SSTs where large-scale dynamics plays important roles, statistical characteristics of cloud microphysical properties, optical depth and albedo are not sensitive to the SST, but those of cloud macrophysical properties are strongly dependent upon the SST. Frequency distributions of vertical velocity from the European Center for Medium-range Weather Forecasts model that is matched to each cloud object are used to interpret some of the findings in this study.

Xu, Kuan-Man↗
DOE OSTI2019

Simulation of the NaGd(MoO{sub 4}){sub 2}–NaEu(MoO{sub 4}){sub 2} and Na{sub 2}Gd{sub 4}(MoO{sub 4}){sub 7}–Na{sub 2}Eu{sub 4}(MoO{sub 4}){sub 7} Solid Solutions by the Interatomic Potential Method

Simulation of the solid solutions in the system of double sodium–gadolinium and sodium–europium molybdates, which are promising matrices for solid state lasers and phosphors has been carried out by the method of interatomic potentials. Two types of solid solutions have been studied, one of which contains finite components corresponding to the stoichiometric NaGd(MoO{sub 4}){sub 2}–NaEu(MoO{sub 4}){sub 2} compositions with statistical distribution of cations in the crystal lattice. Another object is a cation-deficient Na{sub 2}Gd{sub 4}(MoO{sub 4}){sub 7}–Na{sub 2}Eu{sub 4}(MoO{sub 4}){sub 7} system, in which we have examined the variants of statistical distribution and partial ordering of cations over structural positions. Atomistic simulation has been performed using the GULP 4.0.1 software package (General Utility Lattice Program). It is shown that when we pass from sodium-gadolinium molybdate to sodium-europium molybdate, both of stoichiometric and cation-deficient compositions, an increase in the unit cell volume is observed, while the density of the crystal, the energy of interatomic interactions in the structure, the vibrational entropy and the heat capacity decrease along with increasing europium content. The energy of interatomic interactions in the structure for cation-deficient solid solutions is less than for stoichiometric ones. Other aforementioned characteristics for cation-deficient solid solutions have greater values than for stoichiometric ones. The role of cluster europium centers in concentration quenching in NaGd(MoO{sub 4}){sub 2}–NaEu(MoO{sub 4}){sub 2} solid solutions has been examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Controlling Complex Coacervation via Random Polyelectrolyte Sequences

The utilization of chemical sequence control in polymeric materials is key to enabling material design on par with biomacromolecular systems. One important avenue for scalable sequence-controlled polymers leverages the random copolymerization of distinct monomers, with the statistical distribution of the monomeric sequence arising from reaction kinetics following a first-order Markov process. Here we utilize the framework of the random phase approximation (RPA) to develop a theory for the phase behavior of symmetric polyelectrolyte coacervates whose chemical sequences are dictated by simple statistical distributions. We find that a high charge "blockiness" within the random sequences favors the formation of denser and more salt-resistant coacervates while simultaneously increasing the width of the two-phase region. Here, we trace these physical effects to the increased cooperativity of Coulomb interactions that results from increased charge blockiness in oppositely charged polyelectrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Variation in the number of meteoroid impacts on the moon with lunar phase

Data obtained with the Apollo 12 and 14 long-period seismometers in the period between December 1969 and January 1973 are used to determine the direction of approach and mass-distribution statistics of meteoroids in near-earth space. The total number of detected meteoroid impacts in this period is analyzed as a function of lunar phase with allowance for seismometer sensitivity and characteristics of lunar seismic-wave propagation. A logarithmic relation is derived which describes the mass-distribution statistics. It is concluded that most orbits for meteoroids with a mass in excess of 5 kg lie near the plane of the ecliptic with aphelia between 2 and 5 AU.

Dainty, A. M.↗
NASA NTRS2017

Comparison of Satellite Rainfall Estimates and Rain Gauge Measurements in Italy, and Impact on Landslide Modeling

Landslides can be triggered by intense or prolonged rainfall. Rain gauge measurements are commonly used to predict landslides even if satellite rainfall estimates are available. Recent research focuses on the comparison of satellite estimates and gauge measurements. The rain gauge data from the Italian network (collected in the system database Verifica Rischio Frana" (VRF)) are compared with the National Aeronautics and Space Administration (NASA) Tropical Rainfall Measuring Mission (TRMM) products. For the purpose, we couple point gauge and satellite rainfall estimates at individual grid cells, evaluating the correlation between gauge and satellite data in different morpho-climatological conditions. We then analyze the statistical distributions of both rainfall data types and the rainfall events derived from them. Results show that satellite data underestimates ground data, with the largest differences in mountainous areas. Power-law models, are more appropriate to correlate gauge and satellite data. The gauge and satellite-based products exhibit different statistical distributions and the rainfall events derived from them differ. In conclusion, satellite rainfall cannot be directly compared with ground data, requiring local investigation to account for specific morpho-climatological settings. Results suggest that satellite data can be used for forecasting landslides, only performing a local scaling between satellite and ground data.

landslide; satellite rainfall; TRMM; rain gauges; ↗
DOE OSTI2014

SU-E-T-427: Cell Surviving Fractions Derived From Tumor-Volume Variation During Radiotherapy for Non-Small Cell Lung Cancer: Comparison with Predictive Assays

Purpose: To show that a distribution of cell surviving fractions S{sub 2} in a heterogeneous group of patients can be derived from tumor-volume variation curves during radiotherapy for non-small cell lung cancer. Methods: Our analysis was based on two data sets of tumor-volume variation curves for heterogeneous groups of 17 patients treated for nonsmall cell lung cancer with conventional dose fractionation. The data sets were obtained previously at two independent institutions by using megavoltage (MV) computed tomography (CT). Statistical distributions of cell surviving fractions S{sup 2} and cell clearance half-lives of lethally damaged cells T1/2 have been reconstructed in each patient group by using a version of the two-level cell population tumor response model and a simulated annealing algorithm. The reconstructed statistical distributions of the cell surviving fractions have been compared to the distributions measured using predictive assays in vitro. Results: Non-small cell lung cancer presents certain difficulties for modeling surviving fractions using tumor-volume variation curves because of relatively large fractional hypoxic volume, low gradient of tumor-volume response, and possible uncertainties due to breathing motion. Despite these difficulties, cell surviving fractions S{sub 2} for non-small cell lung cancer derived from tumor-volume variation measured at different institutions have similar probability density functions (PDFs) with mean values of 0.30 and 0.43 and standard deviations of 0.13 and 0.18, respectively. The PDFs for cell surviving fractions S{sup 2} reconstructed from tumor volume variation agree with the PDF measured in vitro. Comparison of the reconstructed cell surviving fractions with patient survival data shows that the patient survival time decreases as the cell surviving fraction increases. Conclusion: The data obtained in this work suggests that the cell surviving fractions S{sub 2} can be reconstructed from the tumor volume variation curves measured during radiotherapy with conventional fractionation. The proposed method can be used for treatment evaluation and adaptation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

From Weakly Chaotic Dynamics to Deterministic Subdiffusion via Copula Modeling

Copula modeling consists in finding a probabilistic distribution, called copula, whereby its coupling with the marginal distributions of a set of random variables produces their joint distribution. The present work aims to use this technique to connect the statistical distributions of weakly chaotic dynamics and deterministic subdiffusion. More precisely, we decompose the jumps distribution of Geisel–Thomae map into a bivariate one and determine the marginal and copula distributions respectively by infinite ergodic theory and statistical inference techniques. We verify therefore that the characteristic tail distribution of subdiffusion is an extreme value copula coupling Mittag–Leffler distributions. We also present a method to calculate the exact copula and joint distributions in the case where weakly chaotic dynamics and deterministic subdiffusion statistical distributions are already known. Numerical simulations and consistency with the dynamical aspects of the map support our results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗