SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A two day observation of the March 5, 1979 gamma-ray burst location (GBS 0526-66) with the European X-ray satellite Exosat is reported. These observations were performed on December 30, 1984 and January 3, 1985 in coordination with a worldwide burst watch of this location by a variety of instruments sensitive in the optical, radio, and X-ray wavelength ranges. No bursts were seen by Exosat.
A rotationally-dependent occurrence pattern is identified for the b-bursty emissions observed with Voyager 2 during its 1986 encounter with Uranus. Certain features of this pattern, such as its extension to the highest frequencies and a 40-min signal gap, were sometimes recognizable on individual rotations despite the bursty character of the signals. This pattern is interpreted in terms of Voyager's passing from the inside of a broad, hollow emission cone coming from the southern hemisphere to the outside, and then back in, as a result of planetary rotation. The emission gap then corresponds to the times when Voyager was outside the cone.
Previous studies have used indirect evidence to argue that whistler-mode chorus emissions are generated near the magnetic equator. In this paper a spatial survey of wave normals and Poynting vectors computed from three-component electric and magnetic field measurements is used to show that chorus is generated very close to the magnetic equator. One surprising result is that there are almost no chorus emissions propagating toward the magnetic equator, such as might be expected from high-latitude magnetospheric reflections. The absence of a reflected component indicates that the chorus is reabsorbed, probably by Landau damping, before returning to the magnetic equatorial plane.
Explore the source record for details and available documents.
A system has been developed to measure wideband electic field derivatives (dE/dt) at five ground stations in a 15 km x 15 km network at Kennedy Space Center. Individual station responses are normalized using digital filters. Pulse-timing resolution is improved to much less than 50-ns sample interval by interpolation using packing in the frequency domain. A time tag for each pulse is defined as the mean of the times of the rising-edge half peak, peak, and falling-edge half peak. The standard deviation in these times defines the timing error and is shown to be a function of noise and bandwidth rather than digitization rate. Each of the four unknowns for a pulse source location (x,y,z) and time of occurrence (t) is found from the five time-tag measurements using different weightings for all five combinations of the four-station hyperbolic equations. Weighting factors and errors in x,y,z and t are estimated using error propagation techniques.
Two three-element microphone arrays have been used to predict the position of both pure-tone and broadband noise sources in an anechoic chamber under different ground impedance conditions. Source positions are predicted using the slope of phase-frequency plots between array elements. A phase-slope method for quantitatively assessing both the accuracy and precision of estimates of noise source location is introduced and illustrated. When the phase-slope method is used, there is higher accuracy and more precision in estimates of source location with a small ground impedance than with a large ground impedance. As would be expected, ground impedance effects are larger for low elevation angles than for high elevation angles.
The specific problem objective was to locate the sources of radiated electric field from lightning using an overdetermined set of measurements of time-of-arrival. A similar problem exists for epicentral sources in earthquake location, acoustic sources of thunder, and terrestrial navigation using LORAN and GPS.
This project is a subtask of a multi-center project to advance the state-of-the-art by developing NDE techniques that are capable of evaluating stress rupture (SR) degradation in Kevlar/epoxy (K/Ep) composite overwrapped pressure vessels (COPVs), and damage progression in carbon/epoxy (C/Ep) COPVs. In this subtask, acoustic emission (AE) data acquired during intermittent load hold tensile testing of K/Ep and C/Ep composite tow materials-of-construction used in COPV fabrication were analyzed to monitor progressive damage during the approach to tensile failure. Insight into the progressive damage of composite tow was gained by monitoring AE event rate, energy, source location, and frequency. Source location based on arrival time data was used to discern between significant AE attributable to microstructural damage and spurious AE attributable to background and grip noise. One of the significant findings was the observation of increasing violation of the Kaiser effect (Felicity ratio < 1.0) with damage accumulation.
The refraction angle and amplitude changes associated with sound transmission through a circular, open-jet shear layer were studied in a 0.91 m diameter open jet acoustic research tunnel. Free stream Mach number was varied from 0.1 to 0.4. Good agreement between refraction angle correction theory and experiment was obtained over the test Mach number, frequency and angle measurement range for all on-axis acoustic source locations. For off-axis source positions, good agreement was obtained at a source-to-shear layer separation distance greater than the jet radius. Measureable differences between theory and experiment occurred at a source-to-shear layer separation distance less than one jet radius. A shear layer turbulence scattering experiment was conducted at 90 deg to the open jet axis for the same free stream Mach numbers and axial source locations used in the refraction study. Significant discrete tone spectrum broadening and tone amplitude changes were observed at open jet Mach numbers above 0.2 and at acoustic source frequencies greater than 5 kHz. More severe turbulence scattering was observed for downstream source locations.
Mr. Weir presented source location results obtained from an engine test as part of the Engine Validation of Noise Reduction Concepts program. Two types of microphone arrays were used in this program to determine the jet noise source distribution for the exhaust from a 4.3 bypass ratio turbofan engine. One was a linear array of 16 microphones located on a 25 ft. sideline and the other was a 103 microphone 3-D "cage" array in the near field of the jet. Data were obtained from a baseline nozzle and from numerous nozzle configuration using chevrons and/or tabs to reduce the jet noise. Mr. Weir presented data from two configurations: the baseline nozzle and a nozzle configuration with chevrons on both the core and bypass nozzles. This chevron configuration had achieved a jet noise reduction of 4 EPNdB in small scale tests conducted at the Glenn Research Center. IR imaging showed that the chevrons produced significant improvements in mixing and greatly reduced the length of the jet potential core. Comparison of source location data from the 1-D phased array showed a shift of the noise sources towards the nozzle and clear reductions of the sources due to the noise reduction devices. Data from the 3-D array showed a single source at a frequency of 125 Hz. located several diameters downstream from the nozzle exit. At 250 and 400 Hz., multiple sources, periodically spaced, appeared to exist downstream of the nozzle. The trend of source location moving toward the nozzle exit with increasing frequency was also observed. The 3-D array data also showed a reduction in source strength with the addition of chevrons. The overall trend of source location with frequency was compared for the two arrays and with classical experience. Similar trends were observed. Although overall trends with frequency and addition of suppression devices were consistent between the data from the 1-D and the 3-D arrays, a comparison of the details of the inferred source locations did show differences. A flight test is planned to determine if the hardware tested statically will achieve similar reductions in flight.
An adequate description of the average statistical properties of Saturn's radio emissions is needed for a study of these emissions. Data regarding these properties are presented, and the implications for source location, beaming, and magnetic surface anomalies are discussed. A description is presented of the average properties of the Saturn kilometric radiation (SKR) as observed from two locations by the Voyager 1 planetary radio astronomy (PRA) instrument for a 2-month period centered on the November 12, 1980 encounter. An analysis of the occurrence pattern of SKR as a function of Saturn's rotation phase has shown that SKR occurrence is not continuous, but variable and roughly periodic. The statistical SKR properties obtained strongly constrain possible source locations. Several source locations are possible, but most intriguing is the region at high latitudes near the noon meridian.
The angle and amplitude changes for acoustic waves refracted by a circular open jet shear layer were determined. The generalized refraction theory was assessed experimentally for on axis and off axis acoustic source locations as source frequency varied from 1 kHz to 10 kHz and free stream Mach number varied from 0.1 to 0.4. Angle and amplitude changes across the shear layer show good agreement with theory. Experiments confirm that the refraction theory is independent of shear layer thickness, acoustic source frequency, and source type. A generalized theory is, thus, available for correcting far field noise data acquired in open jet test facilities. The effect of discrete tone scattering by the open jet turbulent shear layer was also studied. Scattering effects were investigated over the same Mach number range as frequency varied from 5 kHz to 15 kHz. Attenuation of discrete tone amplitude and tone broadening were measured as a function of acoustic source position and radiation angle. Scattering was found to be stronger at angles close to the open jet axis than at 90 deg, and becomes stronger as the acoustic source position shifts downstream. A scattering analysis provided an estimate of the onset of discrete tone scattering.
For more than thirty years the intense decametric radio emissions from Jupiter (DAM) and the corresponding auroral kilometric radiation from the Earth (AKR) have remained major radio science mysteries. Part of the problem, aside from their inherent complexity, has been the difficulty of measuring their source location and emission properties from limited observations. Progress has been made on this problem by locating the source directly, i.e., by analysis of the faraday rotation observed with Voyager as the wave path crossed the Io plasma torus, and indirectly by comparing the peak frequencies of the decametric emission with that at the foot of the Io flux tube. Progress was also made on the general question of how the emissions originate by finding properties of both the AKR and DAM which would imply emission by natural radio lasing.
This paper studies some challenging features for phased microphone arrays on aircraft fuselage, including the effects of sound scattering such as refraction by nonuniform boundary layer flows, reflection by curved surfaces, and diffraction by sharp edges and smooth geometry. The objective is to show if and how source locations and source amplitudes can be accurately captured by the array data analysis, in the presence of these features. The study starts with canonical problems to separately examine the individual features, making use of their respective analytical solutions, which provide exact results for all quantities needed for the array data processing. To simulate realistic flight environments, a generic aircraft geometry is then utilized, involving multiple scattering mechanisms and multiple noise sources to model aircraft engine noise. For this application, numerical solutions are computed to provide noise propagation and scattering from the sources to the microphones, as well as the quantities needed for array data analysis. The study reveals the effects of various features on fuselage-mounted arrays and provides guidelines to account for these effects in array data analysis.
Subsonic jets are relatively simple. The peak noise source location gradually moves upstream toward the nozzle as frequency increases. 2) Supersonic jets are more complicated. The peak noise source location moves downstream as frequency increases through a BBSN hump. 3) In both subsonic and supersonic jets the peak noise source location corresponding to a given frequency of noise moves downstream as jet Mach number increases. 4) The noise generated at a given frequency in a BBSN hump is generated by a small number of shocks, not from all the shocks at the same time. 5) Single microphone spectrum levels decrease when the noise source locations measured with the phased array are blocked by a shielding surface. This consistency validates the phased array data and the stationary monopole source model used to process it. 6) Reflecting surface data illustrate that the law of reflection must be satisfied for noise to reflect off a surface toward an observer. Depending on the relative locations of the jet, the surface and the observer only some of the jet noise sources may satisfy this requirement. 7) The low frequency noise created when a jet flow impinges on a surface comes primarily from the trailing edge regardless of the axial extent impacted by the flow.
The dyadic Green's function for an electric current source placed in a rectangular waveguide is derived using a magnetic vector potential approach. A complete solution for the electric and magnetic fields including the source location is obtained by simple differentiation of the vector potential around the source location. The simple differentiation approach which gives electric and magnetic fields identical to an earlier derivation is overlooked by the earlier workers in the derivation of the dyadic Green's function particularly around the source location. Numerical results obtained using the Green's function approach are compared with the results obtained using the Finite Element Method (FEM).
Direct confirmation that low-frequency Jovian hectometric (HOM) radio emissions centered near 0 deg central meridian longitude consist of distinct, oppositely polarized northern and southern beams has been achieved using data from the Unified Radio and Plasma Wave (URAP) experiment on the Ulysses spacecraft during the Ulysses-Jupiter encounter in early February 1992. Distinct northern and southern beams were observed in the frequency range from approximately 300 kHz to 1 MHz for at least eight Jovian rotations during the Ulysses inbound pass at distances from 100 to 40 R(sub j). The radiation from the two magnetic hemispheres was measured from different Jovigraphic longitudes and magnetic (or centrifugal) latitudes. Observed temporal variations in the radio intensities, with time scales on the order of 30 min, may result either from longitudinal variations of the HOM sources or from longitudinal density variations in the Io plasma torus. Using the URAP direction-finding capabilities and assuming a tilted dipole planetary magnetic field model, the three-dimensional HOM source locations, the L shell through these source locations, and the beam opening angles were independently deduced. The HOM sources were found to originate at approximately 3 R(sub j) and on low L shells (L approximately 4 to 6), with beam opening angles ranging from 10 to 50 deg.
Cygnus X-1 and X-2 X ray source location from Uhuru satellite measurements