Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scattering geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Scatter of X-rays on polished surfaces

In investigating the dispersion properties of telescope mirrors used in X-ray astronomy, the slight scattering characteristics of X-ray radiation by statistically rough surfaces were examined. The mathematics and geometry of scattering theory are described. The measurement test assembly is described and results of measurements on samples of plane mirrors are given. Measurement results are evaluated. The direct beam, the convolution of the direct beam and the scattering halo, curve fitting by the method of least squares, various autocorrelation functions, results of the fitting procedure for small scattering, and deviations in the kernel of the scattering distribution are presented. A procedure for quality testing of mirror systems through diagnosis of rough surfaces is described.

Hasinger, G.↗
NASA NTRS2008

Modeling the Diffuse Cloud-Top Optical Emissions from Ground and Cloud Flashes

A number of studies have indicated that the diffuse cloud-top optical emissions from intra-cloud (IC) lightning are brighter than that from normal negative cloud-to-ground (CG) lightning, and hence would be easier to detect from a space-based sensor. The primary reason provided to substantiate this claim has been that the IC is at a higher altitude within the cloud and therefore is less obscured by the cloud multiple scattering medium. CGs at lower altitudes embedded deep within the cloud are more obscured, so CG detection is thought to be more difficult. However, other authors claim that because the CG source current (and hence luminosity) is typically substantially larger than IC currents, the greater CG source luminosity is large enough to overcome the effects of multiple scattering. These investigators suggest that the diffuse cloud top emissions from CGs are brighter than from ICs, and hence are easier to detect from space. Still other investigators claim that the detection efficiency of CGs and ICs is about the same because modern detector sensitivity is good enough to "see" either flash type no matter which produces a brighter cloud top emission. To better assess which of these opinions should be accepted, we introduce an extension of a Boltzmann lightning radiative transfer model previously developed. It considers characteristics of the cloud (geometry, dimensions, scattering properties) and specific lightning channel properties (length, geometry, location, current, optical wave front propagation speed/direction). As such, it represents the most detailed modeling effort to date. At least in the few cases studied thus far, it was found that IC flashes appear brighter at cloud top than the lower altitude negative ground flashes, but additional model runs are to be examined before finalizing our general conclusions.

Solakiewicz, Richard↗
NASA NTRS1992

A very efficient RCS data compression and reconstruction technique, volume 4

A very efficient compression and reconstruction scheme for RCS measurement data was developed. The compression is done by isolating the scattering mechanisms on the target and recording their individual responses in the frequency and azimuth scans, respectively. The reconstruction, which is an inverse process of the compression, is granted by the sampling theorem. Two sets of data, the corner reflectors and the F-117 fighter model, were processed and the results were shown to be convincing. The compression ratio can be as large as several hundred, depending on the target's geometry and scattering characteristics.

Tseng, N. Y.↗
NASA NTRS1989

A user's manual for the method of moments Aircraft Modeling Code (AMC)

This report serves as a user's manual for the Aircraft Modeling Code or AMC. AMC is a user-oriented computer code, based on the method of moments (MM), for the analysis of the radiation and/or scattering from geometries consisting of a main body or fuselage shape with attached wings and fins. The shape of the main body is described by defining its cross section at several stations along its length. Wings, fins, rotor blades, and radiating monopoles can then be attached to the main body. Although AMC was specifically designed for aircraft or helicopter shapes, it can also be applied to missiles, ships, submarines, jet inlets, automobiles, spacecraft, etc. The problem geometry and run control parameters are specified via a two character command language input format. The input command language is described and several examples which illustrate typical code inputs and outputs are also included.

Peters, M. E.↗
NASA NTRS1994

A users manual for the method of moments Aircraft Modeling Code (AMC), version 2

This report serves as a user's manual for Version 2 of the 'Aircraft Modeling Code' or AMC. AMC is a user-oriented computer code, based on the method of moments (MM), for the analysis of the radiation and/or scattering from geometries consisting of a main body or fuselage shape with attached wings and fins. The shape of the main body is described by defining its cross section at several stations along its length. Wings, fins, rotor blades, and radiating monopoles can then be attached to the main body. Although AMC was specifically designed for aircraft or helicopter shapes, it can also be applied to missiles, ships, submarines, jet inlets, automobiles, spacecraft, etc. The problem geometry and run control parameters are specified via a two character command language input format. This report describes the input command language and also includes several examples which illustrate typical code inputs and outputs.

Peters, M. E.↗
NASA NTRS1995

Polarimetric signatures of sea ice. 1: Theoretical model

Physical, structral, and electromagnetic properties and interrelating processes in sea ice are used to develop a composite model for polarimetric backscattering signatures of sea ice. Physical properties of sea ice constituents such as ice, brine, air, and salt are presented in terms of their effects on electromagnetic wave interactions. Sea ice structure and geometry of scatterers are related to wave propagation, attenuation, and scattering. Temperature and salinity, which are determining factors for the thermodynamic phase distribution in sea ice, are consistently used to derive both effective permittivities and polarimetric scattering coefficients. Polarmetric signatures of sea ice depend on crystal sizes and brine volumes, which are affected by ice growth rates. Desalination by brine expulsion, drainage, or other mechanisms modifies wave penetration and scattering. Sea ice signatures are further complicated by surface conditions such as rough interfaces, hummocks, snow cover, brine skim, or slush layer. Based on the same set of geophysical parameters characterizing sea ice, a composite model is developed to calculate effective permittivities and backscattering covariance matrices at microwave frequencies to interpretation of sea ice polarimetric signatures.

Nghiem, S. V.↗
NASA NTRS1995

Polarimetric Signatures of Sea Ice: Theoretical Model - Part 1

Physical, structural, and electromagnetic properties and interrelating processes in sea ice are used to develop a composite model for polarimetric backscattering signatures of sea ice. Physical properties of sea ice constituents such as ice, brine, air, and salt are presented in terms of their effects on electromagnetic wave interactions. Sea ice structure and geometry of scatterers are related to wave propagation, attenuation, and scattering. Temperature and salinity, which are determining factors for the thermodynamic phase distribution in sea ice, are consistently used to derive both effective permittivities and polarimetric scattering coefficients. Polarimetric signatures of sea ice depend on crystal sizes and brine volumes, which are affected by ice growth rates. Desalination by brine expulsion, drainage, or other mechanisms modifies wave penetration and scattering. Sea ice signatures are further complicated by surface conditions such as rough interfaces, hummocks, snow cover, brine skim, or slush layer. Based on the same set of geophysical parameters characterizing sea ice, a composite model is developed to calculate effective permittivities and backscattering covariance matrices at microwave frequencies for interpretation of sea ice polarimetric signatures.

Nghiem, S. V.↗
NASA NTRS1997

Doppler Global Velocimeter Development for the Large Wind Tunnels at Ames Research Center

Development of an optical, laser-based flow-field measurement technique for large wind tunnels is described. The technique uses laser sheet illumination and charged coupled device detectors to rapidly measure flow-field velocity distributions over large planar regions of the flow. Sample measurements are presented that illustrate the capability of the technique. An analysis of measurement uncertainty, which focuses on the random component of uncertainty, shows that precision uncertainty is not dependent on the measured velocity magnitude. For a single-image measurement, the analysis predicts a precision uncertainty of +/-5 m/s. When multiple images are averaged, this uncertainty is shown to decrease. For an average of 100 images, for example, the analysis shows that a precision uncertainty of +/-0.5 m/s can be expected. Sample applications show that vectors aligned with an orthogonal coordinate system are difficult to measure directly. An algebraic transformation is presented which converts measured vectors to the desired orthogonal components. Uncertainty propagation is then used to show how the uncertainty propagates from the direct measurements to the orthogonal components. For a typical forward-scatter viewing geometry, the propagation analysis predicts precision uncertainties of +/-4, +/-7, and +/-6 m/s, respectively, for the U, V, and W components at 68% confidence.

Reinath, Michael S.↗
NASA NTRS1996

[MODIS Investigation]

Our first activity is based on delivery of code to Bob Evans (University of Miami) for integration and eventual delivery to the MODIS Science Data Support Team. As we noted in our previous semi-annual report, coding required the development and analysis of an end-to-end model of fluorescence line height (FLH) errors and sensitivity. This model is described in a paper in press in Remote Sensing of the Environment. Once the code was delivered to Miami, we continue to use this error analysis to evaluate proposed changes in MODIS sensor specifications and performance. Simply evaluating such changes on a band by band basis may obscure the true impacts of changes in sensor performance that are manifested in the complete algorithm. This is especially true with FLH that is sensitive to band placement and width. The error model will be used by Howard Gordon (Miami) to evaluate the effects of absorbing aerosols on the FLH algorithm performance. Presently, FLH relies only on simple corrections for atmospheric effects (viewing geometry, Rayleigh scattering) without correcting for aerosols. Our analysis suggests that aerosols should have a small impact relative to changes in the quantum yield of fluorescence in phytoplankton. However, the effect of absorbing aerosol is a new process and will be evaluated by Gordon.

Abbott, Mark R.↗
NASA NTRS2013

Analysis of the Impedance Resonance of Piezoelectric Multi-Fiber Composite Stacks

Multi-Fiber CompositesTM (MFC's) produced by Smart Materials Corp behave essentially like thin planar stacks where each piezoelectric layer is composed of a multitude of fibers. We investigate the suitability of using previously published inversion techniques for the impedance resonances of monolithic co-fired piezoelectric stacks to the MFCTM to determine the complex material constants from the impedance data. The impedance equations examined in this paper are those based on the derivation. The utility of resonance techniques to invert the impedance data to determine the small signal complex material constants are presented for a series of MFC's. The technique was applied to actuators with different geometries and the real coefficients were determined to be similar within changes of the boundary conditions due to change of geometry. The scatter in the imaginary coefficient was found to be larger. The technique was also applied to the same actuator type but manufactured in different batches with some design changes in the non active portion of the actuator and differences in the dielectric and the electromechanical coupling between the two batches were easily measureable. It is interesting to note that strain predicted by small signal impedance analysis is much lower than high field stains. Since the model is based on material properties rather than circuit constants, it could be used for the direct evaluation of specific aging or degradation mechanisms in the actuator as well as batch sorting and adjustment of manufacturing processes.

Multi-fiber composites↗
NASA NTRSDate not supplied

Sensitivity of Single-Scattering Properties to Precipitation Particle Meltwater Geometry for GPM Passive Microwave and Radar Remote Sensing Applications

The objective of the current work is to describe the microwave single-scattering properties of partially melted ice-phase precipitation particles using physically-based computational methods, taking into full account the varied geometries of the initially “dry” ice particles and the distributions of liquid water that develop during the melting process. Ultimately, the bulk properties of ensembles of these partially-melted particles will be included in “scattering tables” to support radar and combined radar-radiometer remote sensing of precipitation. A meshless Lagrangian melting procedure (snowMELT) based on smoothed-particle hydrodynamics is applied to both spherical and finely-structured ice particle models to describe the full evolution of the particles from dry ice particles to liquid drops. The melting of spherical ice particles using snowMELT is compared to an alternative continuum physics model to validate melt times and internal thermodynamics. The discrete dipole approximation is then utilized to calculate the single-scattering properties of different mixed-phase particles throughout the melting process. The sensitivities of particle single-scattering properties to thermodynamic and hydrodynamic assumptions in snowMELT are explored, and the implications for combined radar-radiometer precipitation remote sensing from GPM are discussed.

William S Olson↗
NASA NTRS1977

Cluster calculation of carbon monoxide on a Cu surface using the self-consistent-field-X-alpha-scattered-wave method

Two geometries of CO chemisorbed on a Cu(100) surface have been studied using the self-consistent-field-X-alpha-scattered-wave method. Both geometries assume the CO molecule is bonded to the Cu surface with the C end down; one geometry is in the fourfold-symmetric hole site and one is directly on top of a Cu atom. The calculated valence density of states for the fourfold-symmetry case gives a satisfactory interpretation of the two main peaks below the copper d band in the UV photoemission spectra (UPS). A third weaker peak of the UPS data can be correlated with a CO molecule adsorbed directly on top of a copper atom.

Yu, H. L.↗
NASA NTRS1995

Polarization from scattering in blobs

We describe a Monte Carlo method for calculating polarization due to scattering in various geometries. We apply the method in this paper to the case of scattering in a spherical cloud illuminated by parallel rays. The polarization is largest in small optical depth blobs, where single scattering dominates. The polarization decreases as optical depth increases until a limit is reached where scattering occurs on the surface, and increasing optical depth has little effect on the results. For a given optical depth, decreasing the albedo leads to an increase of the degree of polarization of the scattered light because single scattering increases relative to multiple scattering. As the optical depth of the blob increases, the scattered flux becomes increasingly backward throwing. In the high albedo blobs, the maximum polarization becomes skewed towards the illuminated hemisphere at high optical depths. We discuss the applications to polarization in supergiants and R CrB stars, and scattering in a clumpy interstellar medium.

Code, Arthur D.↗
NASA NTRS1984

Remote Sensing of Earth Terrain

Theoretical models that are useful and practical in relating remote sensing data to the important physical parameters characterizing Earth terrain are developed. The development of models that are useful in data analysis and interpretation, scene simulation, and developing new remote sensing approaches and techniques is discussed. Numerous theoretical models that are applicable to the active and passive remote sensing of plowed fields, atmospheric precipitation, vegetation, and snow fields were developed. The radiative transfer theory is used to interpret the active and passive data as a function of rain rate. Both the random medium model and the discrete scatterer model is used to study the remote sensing of vegetation fields. Due to the non-spherical geometry of the scatterers there is strong azimuthal dependence in the observed data. Thus, the anisotropic random medium model and the discrete scatterer model with nonspherical particles was developed. In order to relate the remote sensing data to the actual physical parameters, the scattering of electromagnetic waves from randomly distributed dielectric scatterers was studied. Both the rigorous random discrete scatterer theory and the strong fluctuation theory are used to derive the backscattering cross section in terms of the actual physical parameters and the results agree well with the data obtained from the snow fields.

Kong, J. A.↗
NASA NTRS1996

An Electrothermodynamic Model with Distributed Properties for Effective Permittivities of Sea Ice

This paper presents a model to calculate the temperature dependence of effective permittivities for sea ice, a heterogeneous medium containing multiphase scatterers. With the strong permittivity fluctuation approach the model accounts for the electrodynamic scattering effect together with the quasi-static characteristics of multiple species and subspecies of inhomogeneities with distributed orientations, sizes, and shapes. Because of a preferential direction in the orientation distribution, the medium is effectively anisotropic. The size distribution is described with a probability density function in terms of normalized volumetric sizes. Scatterer shapes are nonuniform and have a general ellipsoidal form characterized by arbitrary axial ratios of correlation lengths which are related to physical geometries of the scatterers. In this formulation, sea ice consisting of solid ice, liquid brine, and gaseous inclusions is modeled to derive effective permittivities with thermodynamic phase redistribution and structural metamorphism. Theoretical results are in good agreement with experimental data at the C band frequency of 4.8 GHz for saline ice undergoing warming and cooling cycles. A competitive effect between the increase of liquid brine and the shape rounding of ellipsoidal scatterers at increasing temperatures explains the trend observed in measured data. Sensitivities of effective permittivities to structural and physical parameters characterizing sea ice are also studied.

Nghiem, S. V.↗
NASA NTRS2022

Ultraviolet Spectropolarimetry Conservative and Nonconservative Mass Transfer in OB Interacting Binaries

The current consensus is that at least half of the OB stars are formed in binary or multiple star systems. The evolution of OB stars is greatly influenced by whether the stars begin as close binaries, and the evolution of the binary systems depend on whether the mass transfer is conservative or nonconservative. FUV/NUV spectropolarimetry is poised to answer the latter question. This paper discusses how the Polstar spectropolarimetry mission can characterize the degree of nonconservative mass transfer that occurs at various stages of binary evolution, from the initial mass reversal to the late Algol phase, and quantify its amount. The proposed instrument combines spectroscopic and polarimetric capabilities, where the spectroscopy can resolve Doppler shifts in UV resonance lines with 10 km/s precision, and polarimetry can resolve linear polarization with 10 −3 precision or better. The spectroscopy will identify absorption by mass streams and other plasmas seen in projection against the stellar disk as a function of orbital phase, as well as scattering from extended splash structures, including jets. The polarimetry tracks the light coming from material not seen against the stellar disk, allowing the geometry of the scattering to be tracked, resolving ambiguities left by the spectroscopy and light-curve information. For example, nonconservative mass streams ejected in the polar direction will produce polarization of the opposite sign from conservative transfer accreting in the orbital plane. Time domain coverage over a range of phases of the binary orbit are well supported by the Polstar observing strategy. Special attention will be given to the epochs of enhanced systemic mass loss that have been identified from IUE observations (pre-mass reversal and tangential gas stream impact). We show how the history of systemic mass and angular momentum loss/gain episodes can be inferred via ensemble evolution through the r–q diagram. Combining the above elements will significantly improve our understanding of the mass transfer process and the amount of mass that can escape from the system, an important channel for changing the final mass and ultimate supernova of a large number of massive stars found in binaries at close enough separation to undergo interaction.

Geraldine J. Peters↗
NASA NTRS1993

Groundbased monitoring of Martian atmospheric opacity

The amount of dust in the Martian atmosphere is variable in both space and time. The presence of aerosols in the Mars atmosphere complicates quantitative analysis of Martian surface properties. We have developed a model for Mars surface and atmospheric scattering based on equations in Hillier et al (1991). This formulation was chosen for its speed of computation and because it accounts for the spherical geometry of atmospheric scattering at high mission angles, i.e., near the planetary limb.

Herkenhoff, K. E.↗