Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rooting depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Completing below-ground carbon budgets for pastures, recovering forests, and mature forests of Amazonia

The objective of this grant was to complete below-ground carbon budgets for pastures and forest soils in the Amazon. Profiles of radon and carbon dioxide were used to estimate depth distribution of CO2 production in soil. This information is necessary for determining the importance of deep roots as sources of carbon inputs. Samples were collected for measuring root biomass from new research sites at Santana de Araguaia and Trombetas. Soil gases will be analyzed for CO2 and (14)CO2, and soil organic matter will be analyzed for C-14. Estimates of soil texture from the RADAMBRASIL database were merged with climate data to calculate soil water extraction by forest canopies during the dry season. In addition, a preliminary map of areas where deep roots are needed for deep soil water was produced. A list of manuscripts and papers prepared during the reporting periods is given.

Davidson, Eric A.↗

Satellite Gravimetry Applied to Drought Monitoring

Near-surface wetness conditions change rapidly with the weather, which limits their usefulness as drought indicators. Deeper stores of water, including root-zone soil wetness and groundwater, portend longer-term weather trends and climate variations, thus they are well suited for quantifying droughts. However, the existing in situ networks for monitoring these variables suffer from significant discontinuities (short records and spatial undersampling), as well as the inherent human and mechanical errors associated with the soil moisture and groundwater observation. Remote sensing is a promising alternative, but standard remote sensors, which measure various wavelengths of light emitted or reflected from Earth's surface and atmosphere, can only directly detect wetness conditions within the first few centimeters of the land s surface. Such sensors include the Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E) C-band passive microwave measurement system on the National Aeronautic and Space Administration's (NASA) Aqua satellite, and the combined active and passive L-band microwave system currently under development for NASA's planned Soil Moisture Active Passive (SMAP) satellite mission. These instruments are sensitive to water as deep as the top 2 cm and 5 cm of the soil column, respectively, with the specific depth depending on vegetation cover. Thermal infrared (TIR) imaging has been used to infer water stored in the full root zone, with limitations: auxiliary information including soil grain size is required, the TIR temperature versus soil water content curve becomes flat as wetness increases, and dense vegetation and cloud cover impede measurement. Numerical models of land surface hydrology are another potential solution, but the quality of output from such models is limited by errors in the input data and tradeoffs between model realism and computational efficiency. This chapter is divided into eight sections, the next of which describes the theory behind satellite gravimetry. Following that is a summary of the GRACE mission and how hydrological information is gleaned from its gravity products. The fourth section provides examples of hydrological science enabled by GRACE. The fifth and sixth sections list the challenging aspects of GRACE derived hydrology data and how they are being overcome, including the use of data assimilation. The seventh section describes recent progress in applying GRACE for drought monitoring, including the development of new soil moisture and drought indicator products, and that is followed by a discussion of future prospects in satellite gravimetry based drought monitoring.

Rodell, Matthew↗

Elemental, Isotopic, and Organic Analysis on Mars with Laser TOF-MS

The in-depth landed exploration of Mars will require increasingly sophisticated robotic analytical tools for both in situ composition science [1] and reconnaissance for sample return [2]. Beyond dust, rock surfaces, and topsoil, samples must be accessed within rocks and ice, well below surface soil, and possibly in elevated deposit layers. A range of spatial scales will be studied, and for the most information-rich microscopic analyses, samples must be acquired, prepared, and positioned with high precision. In some cases samples must also be brought into a vacuum chamber. After expending such resources, it will be important to apply techniques that provide a wide range of information about the samples. Microscopy, mineralogy, and molecular/organic, elemental, and isotopic analyses are all needed, at a minimum, to begin to address the in situ goals at Mars. These techniques must work as an efficient suite to provide layers of data, each layer helping to determine if further analysis on a given sample is desired. In the spirit of broad-band and efficient data collection, we are developing miniature laser time-of-flight mass spectrometers (TOF-MS) for elemental, isotopic, and molecular/organic microanalysis of unprepared solid samples. Laser TOF-MS uses a pulsed laser to volatilize and ionize material from a small region on the sample. The laser energy and focus can be adjusted for atomic and molecular content, sampling area, and depth. Ions travel through the instrument and are detected at a sequence of times proportional to the square root of their mass-to- charge ratios. Thus, each laser pulse produces a complete mass spectrum (in less than 50 microseconds). These instruments can now be significantly miniaturized (potentially to the size of a soda can) without a loss in performance. This effort is reviewed here with an emphasis on applications to Mars exploration.

Brinckerhoff, W. B.↗

Cramer-Rao Lower Bound for SoOp-R-Based Root-Zone Soil Moisture Remote Sensing

Signals of opportunity (SoOp) reflectometry (SoOp-R) is a maturing field for geophysical remote sensing as evidenced by the growing number of airborne and spaceborne experiments. As this approach receives more attention, it is worth analyzing SoOp-R’s capabilities to retrieve subsurface soil moisture (SM) by leveraging communication and navigation satellite transmitters. In this research, the CRLB is used to identify the effects of variable SoOp-R parameters on the best achievable estimation error for root-zone soil moisture (RZSM). This study investigates the use of multiple frequency, polarization, and incidence angle measurement configurations on a two-layered dielectric profile. The results also detail the effects of variable SM conditions on the capability of SoOp-R systems to predict subsurface SM. The most prevalent observation is the importance of using at least two frequencies to limit uncertainties from subsurface SM estimates. If at least two frequencies are used, the CRLB of a profile is retrievable within the root-zone depending on the surface SM content as well as the number of independent measurements of the profile. For a depth of 30 cm, it is observed that a CRLB corresponding to 4% RZSM estimation accuracy is achievable with as few as 2 dual-frequency-based SoOp-R measurements. For this depth, increasing number of measurements provided by polarization and incidence angle allow for sensing of increasingly wet SM profile structures. This study, overall, details a methodology by which SoOp-R receiver system can be designed to achieve a desired CRLB using a trade-off study between the available measurements and SM profile.

Signals of Opportunity (SoOp)↗

Derivation and Validation of Supraglacial Lake Volumes on the Greenland Ice Sheet from High-Resolution Satellite Imagery

Supraglacial meltwater lakes on the western Greenland Ice Sheet (GrIS) are critical components of its surface hydrology and surface mass balance, and they also affect its ice dynamics. Estimates of lake volume, however, are limited by the availability of in situ measurements of water depth,which in turn also limits the assessment of remotely sensed lake depths. Given the logistical difficulty of collecting physical bathymetric measurements, methods relying upon in situ data are generally restricted to small areas and thus their application to largescale studies is difficult to validate. Here, we produce and validate spaceborne estimates of supraglacial lake volumes across a relatively large area (1250 km(exp 2) of west Greenland's ablation region using data acquired by the WorldView-2 (WV-2) sensor, making use of both its stereo-imaging capability and its meter-scale resolution. We employ spectrally-derived depth retrieval models, which are either based on absolute reflectance (single-channel model) or a ratio of spectral reflectances in two bands (dual-channel model). These models are calibrated by usingWV-2multispectral imagery acquired early in the melt season and depth measurements from a high resolutionWV-2 DEM over the same lake basins when devoid of water. The calibrated models are then validated with different lakes in the area, for which we determined depths. Lake depth estimates based on measurements recorded in WV-2's blue (450-510 nm), green (510-580 nm), and red (630-690 nm) bands and dual-channel modes (blue/green, blue/red, and green/red band combinations) had near-zero bias, an average root-mean-squared deviation of 0.4 m (relative to post-drainage DEMs), and an average volumetric error of b1%. The approach outlined in this study - image-based calibration of depth-retrieval models - significantly improves spaceborne supraglacial bathymetry retrievals, which are completely independent from in situ measurements.

Spectrally-based depth-retrieval models↗

The evolution of the clear air convective layer revealed by surface-based remote sensors

Results are reported for simultaneous observations of the growth and decay of the clear-air convective mixing layer near a coastline, which were made with an FM-CW radar, a high-power narrow-beam S-band radar, and an acoustic echo sounder. The main purpose of this study was to determine the relationship between the rise rate of the convective depth and the lapse rate of temperature, particularly in the morning hours. The results indicate that the three remote sensors can provide excellent mutually supporting data on the convective depth. It is found that this depth is well behaved during the day and that its rise rate varies roughly linearly with the inverse square root of the temperature lapse rate during the morning. The data suggest that some models concerning the rise rate require modification, since these models imply that the surface heat flux would have to be unreasonably large to produce the observed relationship.

Noonkester, V. R.↗

P- and L-Band Retrieval of Subsurface Soil Moisture and Temperature Profiles as First-Order Polynomial Function

This paper demonstrates the potential use of P and L band passive measurements to determine root zone soil moisture (SM) and soil temperature(ST). SM and ST data have been taken as a function of depth during the NASA GSFC PLEX19 experiment in the summer of 2019 at Beltsville, MD, USA. Using these data, a coherent model has been used to compute H and V brightness temperatures at frequencies of 0.8 and 1.4 GHz with an observation angle of 35 degrees. These synthetic brightness data are then used to estimate the SM and ST profiles which are represented by linear polynomials. The inversion problem is formulated as a least square problem that is solved by a global optimization method known as the Adaptive Simulated Annealing(ASA) method. Four inversion examples having different SM and ST profiles are presented. Selected results show that the standard deviation between the retrieved and measured data is less than 0.077 cm3/cm3 for SM, and 2.245 °C for ST.

Ming Li↗

Momentumless coalescence of drops

The dynamics of mixing and satellite drop formation following the coalescence of initially stationary low-viscosity drops of the same liquid has been investigated using immiscible systems. The main parameters of interest are the drop sizes, the drop viscosity and the host viscosity. For drops of equal sizes there is no mixing following coalescence, which is consistent with that first demonstrated on the Skylab. However, for drops of unequal sizes there is considerable mixing with the smaller drop penetrating the larger drop as a vortex. In the extreme case of coalescence of a small drop with the bulk of the same liquid at a flat interface, the measured penetration depth is found to be proportional to the 5/4 th power of the drop diameter and inversely proportional to the square root of drop viscosity. When the drop and host viscosities are comparable, drop penetration is prematurely terminated by the formation of a satellite drop. However, when the drop diameter ratio (large to small) is below a critical number, satellite drop formation is inhibited and coalescence goes to completion. The influence of drop-host viscosity ratio on this critical diameter ratio has been examined.

Anilkumar, A. V.↗

RXTE Observation of Cygnus X-1: Spectra and Timing

We present first results from the analysis of an RXTE observation of Cyg X-1 in its low state, taken about two months after the end of the high state. With Gamma approx. equal to 1.45 the spectrum is considerably harder than previous low-state measurements. The observed spectrum can be explained by a Comptonization spectrum as that emitted from a spherical corona surrounded by a cold accretion disk. The optical depth of the corona is between 2 and 2.5 and the temperature is between 60 and 80 keV. Temporal analysis shows a typical Root Mean Square (RMS) noise of approximately 25%. The Pulse Shape Discrimination (PSD) can be described as consisting of a flat component followed by an 1/f power-law, followed by an f(sup -1.6) power-law. The lag of the hard photons with respect to the soft photons is consistent with prior observations. The coherence function is remarkably close to unity from 0.01 Hz to 10 Hz.

Wilms, J.↗

A Semi-Empirical Scheme for Bathymetric Mapping in Shallow Water by ICESat-2 and Sentinel-2: A Case Study in the South China Sea

To derive shallow water bathymetry for coastal areas, a common approach is to deploy a scanning airborne bathymetric light detection and ranging (LiDAR) system or a shipborne echosounder for ground surveys. However, recent advancements in satellite remote sensing, including the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) offer new tools for generating satellite derived bathymetry (SDB). The key payload onboard ICESat-2 is the Advanced Topographic Laser Altimeter System (ATLAS), a micro-pulse, photon-counting LiDAR system, simultaneously emitting six separate 532 nm beams at 10 kHz pulse rate. However, despite its high resolution, the major limitation for bathymetry is that ICESat-2 only provides along-track height profiles, leaving observation gaps between the parallel ground tracks. Merging ICESat-2 observations with optical multispectral imagery, as demonstrated herein, provides an effective solution for deriving a full scene of water depth in light of the spectral attenuation behavior. This study aims to combine ICESat-2 and Sentinel-2 optical data to derive shallow water bathymetry (depth <20 m) at six islands and reefs in the South China Sea. ICESat-2 ATL03 point clouds of georeferenced photons are first filtered to determine the seafloor elevation along the ground track. Results indicate a root-mean-square error (RMSE) of 0.26–0.61 m as compared with independent observations from an airborne LiDAR campaign. Next, three semi-empirical functions, namely the Modified Linear/Polynomial/Exponential Ratio Models with its kernel formed by the log ratio between Sentinel-2′s green and blue bands, are used to fit the spectral data with ICESat-2 height profiles. After water depth mapping using the trained model, independent ICESat-2 point clouds are used to validate the Sentinel-2 derived bathymetry. The RMSE values of the three models using the weighted average of multiple images for these six islands are within 0.50–0.90 m in 0–15 m deep. We also demonstrate that a synthesis of satellite laser altimetry and optical remote sensing can produce SDB results that potentially meet the requirement of category C in Zones of Confidence (ZOC) of the Electronic Navigational Chart (ENC) in 0–8 m deep. It is foreseen that ICESat-2 will be a helpful tool for mapping coastal and shallow waters around the world especially where bathymetric data are unavailable.

Coastal Bathymetry↗

Validating MODIS Above-Cloud Aerosol Optical Depth Retrieved from Color Ratio Algorithm Using Direct Measurements Made by NASA's Airborne AATS and 4STAR Sensors

We present the validation analysis of above-cloud aerosol optical depth (ACAOD) retrieved from the color ratio method applied to MODIS cloudy-sky reflectance measurements using the limited direct measurements made by NASAs airborne Ames Airborne Tracking Sunphotometer (AATS) and Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) sensors. A thorough search of the airborne database collection revealed a total of five significant events in which an airborne sun photometer, coincident with the MODIS overpass, observed partially absorbing aerosols emitted from agricultural biomass burning, dust, and wildfires over a low-level cloud deck during SAFARI-2000, ACE-ASIA 2001, and SEAC4RS 2013 campaigns, respectively. The co-located satellite-airborne match ups revealed a good agreement (root-mean-square difference less than 0.1), with most match ups falling within the estimated uncertainties associated with the MODIS retrievals (about -10 to +50 ). The co-retrieved cloud optical depth was comparable to that of the MODIS operational cloud product for ACE-ASIA and SEAC4RS, however, higher by 30-50% for the SAFARI-2000 case study. The reason for this discrepancy could be attributed to the distinct aerosol optical properties encountered during respective campaigns. A brief discussion on the sources of uncertainty in the satellite-based ACAOD retrieval and co-location procedure is presented. Field experiments dedicated to making direct measurements of aerosols above cloud are needed for the extensive validation of satellite based retrievals.

airborne sun photometer↗

Pulse-echo probe of rock permeability near oil wells

Processing method involves sequential insonifications of borehole wall at number of different frequencies. Return signals are normalized in amplitude, and root-mean-square (rms) value of each signal is determined. Values can be processed to yield information on size and number density of microfractures at various depths in rock matrix by using averaging methods developed for pulse-echo technique.

Narasimhan, K. Y.↗

Post-glacial relaxation of a viscously stratified compressible mantle

The postglacial relaxation phenomenon of a viscously compressible nonself-gravitating spherical-shell model is investigated. Analytical solutions to an exponentially depth-dependent viscosity are developed with various types of compressible density models such as those with an exponential dependence of the radius and an algebraic-root dependence of the radius. The solutions of a viscously compressible multilayered model with constant thermodynamic properties and viscosity are developed by the propagator matrix method. The results show that inferences of deep mantle viscosity from postglacial rebound would be hampered by mantle compressibility for long-wavelength harmonics because of the smaller excitation of compressible eigenfunctions in the lower mantle. The relaxation times and velocity fields are more sensitive to higher viscosity contrast for the exponentially varying viscosity than for models with discrete jumps in the viscosity structure.

Wu, J.↗

High Resolution VLBA Observations of NGC 4261

The VLBA's high angular resolution at 22 and 43 GHz allows the nuclei of nearby radio galaxies to be imaged with very high linear resolution (a few hundred Schwarzschild radii or less for central black hole masses of about 10(exp 8) - 10(exp 9) solar mass). This is the scale on which absorption by the dense ionized inner regions of nuclear accretion disk should be detected. We present 8, 22, and 43 GHz VLBA images of the two-sided radio jets in NGC 4261 (2C370) with sub-parsec resolution, and derive constraints on the physical properties of the inner accretion disk. In addition, preliminary results from multi-epoch VLBA observations to detect proper motions in the jet and counterjet, and thus determine the orientation of the radio axis to our line of sight, may be available. Our multi-frequency images show apparent absorption by a nearly edge-on disk at 8 GHz, but not evidence for absorption at 22 or 43 GHz. Assuming that this is due to a lower optical depth for free-free absorption at 22 and 43 GHz, we find an upper limit for the electron density of approximately 10(exp 8)* Square root of(0.1/L)/cubic cm, where L is the path length through the disk in pc. The disk inclination, and therefore the likely path length, will be better determined by the ongoing VLBA proper motions measurements. This research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National Aeronautics and Space Administration.

Jones, D. L.↗

Isostasy and the ambient state of stress in the oceanic lithosphere

It is proposed that the ambient state of isostatic deviatoric stress in the ocean lithosphere is the minimum necessary for the support of the density and topographic anomalies associated with the elevation of the mid-ocean ridges. The principal evidence for this hypothesis is that it is in agreement with the observed oceanic intraplate earthquake mechanisms. The main deviatoric stresses are compressive perpendicular to the axis of the mid-ocean ridge, zero parallel to the ridge, and tensile vertically. At any given distance from the ridge the stress is maximum at the seafloor; it decreases with depth at about the same rate as the cooling of the lithosphere, so that the entire thermal boundary layer acts as a support to the global square root of age topography of the oceans.

Dahlen, F. A.↗

VHF SoOp (Signal of Opportunity) Technology Demonstration for Soil Moisture Measurement Using Microwave Hydraulic Boom Truck Platform

A goal of this research is to test deployable VHF antennas for 6U Cubesat platforms to enable validation of root zone soil moisture (RZSM) estimation algorithms for signal of opportunity (SoOp) remote sensing over the 240-270 MHz frequency band. The proposed work provides a strong foundation for establishing a technology development path for maturing a global direct surface soil moisture (SM) and RZSM measurement system over a variety of land covers. Knowledge of RZSM up to a depth of 1 meter and surface SM up to a depth of 0.05 meter on a global scale, at a spatial resolution of 1-10 km through moderate-to-heavy vegetation, is critical to understanding global water resources and the vertical moisture gradient in the Earths surface layer which controls moisture interactions between the soil, vegetation, and atmosphere. Current observations of surface SM from space by L-band radiometers (1.4 GHz) and radars (1.26 GHz) are limited to measurements of surface SM up to a depth of 0.05 meter through moderate amounts of vegetation. This limitation is mainly due to the inability of L-band signals to penetrate through dense vegetation and deep into the soil column. Satellite observations of the surface moisture conditions are coupled to sophisticated models which extrapolate the surface SM into the root zone, thus providing an indirect estimate rather than a direct measurement of RZSM. To overcome this limitation, low-frequency airborne radars operating at 435 MHz and 118 MHz have been investigated, since these lower frequencies should penetrate denser vegetation and respond to conditions deeper in the soil.

SoOp↗

A Principal Component-Based Radiative Transfer Forward Model (PCRTM) for Vertically in Homogeneous Cloud

A principal-component based radiative transfer model (PCRTM) is developed for simulating the infrared spectral radiance at the top of the atmosphere (TOA). The PCRTM approach removes the redundancy in radiative transfer calculation in high resolution infrared spectra, and saves significant amount of computational time with great accuracy. In PCRTM, both ice and water clouds are treated as effective transmissivity and reflectivity stored in a pre-calculated lookup tables. These quantities are calculated using cloud single scattering properties such as cloud optical depth, cloud particle size, cloud phase, etc. The cloud can be inserted into any pressure layer in the PCRTM model (up to 100 layers). The effective temperature of each cloud layer is treated as a function of its optical depth. To test the accuracy of this approximation, the results are compared with the more rigorous DISORT model, which treats cloud as a plane parallel layer. The root-mean-square error of PCRTM, with respect to DISORT results, is generally less than 0.5 K in brightness temperature. However, the CPU time required by PCRTM was approximately two orders of magnitude less than that required by DISORT.

Li, Hui↗

Correlation of Al/Si X-ray fluorescence data with other remote sensing data from the Taurus-Littrow area

Al/Si intensity ratios from the Apollo 15 X-ray fluorescence experiment have been analyzed in conjunction with such other remote-sensing data as visible albedo measurements, color-difference photographs, and relative spectral reflectivity curves for the purpose of defining geochemical units in the Taurus-Littrow area. A geochemical boundary between the dark-mantle unit and the western edge of the Taurus Mountains is indicated by all the remote-sensing techniques considered. The major component of the ejecta from Catena Littrow, located within the dark-mantle unit, is highland-type material. The areal extent of the ejecta determined from the Al/Si data is at least 30 km along the Apollo 15 ground track. The constraint imposed upon depth to high-alumina material at Catena Littrow is 520 m. If the high-alumina material excavated at Catena Littrow is an extension of the Taurus Mountain 'roots', then the maximum slope of the buried highland surface from Catena Littrow to the Taurus Mountains border is less than 2.0 deg

Andre, C. G.↗