Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reverse Monte Carlo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Local chemical and topological order in Al-Tb and its role in controlling nanocrystal formation

How the chemical and topological short- to medium-range order develops in Al-Tb glass and its ultimate effect on the control of the high number density of face-centered-cubic-Al (fcc-Al) nuclei during devitrification are described. A combined study using high-energy X-ray diffraction (HEXRD), atom probe tomography (APT), transmission electron microscopy and fluctuation electron microscopy (FEM) was conducted in order to resolve the local structure in amorphous Al 90 Tb 10 . Reverse Monte Carlo simulations and Voronoi tessellation analysis based on HEXRD experiments revealed a high coordination of Al around Tb atoms in both liquid and amorphous states. APT results show Al-rich and Al-depleted regions within the as-quenched alloy. A network structure of Tb-rich clusters divides the matrix into nanoscale regions where Al-rich clusters are isolated. It is this finely divided network which allows the amorphous structure to form. Al-rich regions are the locus for fcc-Al crystallization, which occurs before the intermetallic crystallization. FEM reveals medium-range ordered regions ~2 nm in diameter, consistent with fcc-Al and trigonal-like Al 3 Tb crystal structures. We propose that the high coordination of Al around Tb limits diffusion in the intermetallic network, allowing for the isolated Al-rich regions to form at high density. These regions are responsible for the extremely high density of Al nanocrystal nuclei.

36 MATERIALS SCIENCE↗

Structural evolution in Ni-Nb and Ni-Nb-Ta liquids and glasses - A measure of liquid fragility?

The structures of Ni 59.5 Nb 40.5 , Ni 62 Nb 38 , and Ni 60 Nb 30 Ta 10 liquids and glasses were studied using synchrotron high-energy X-ray diffraction. To avoid reactions between the liquids and their containers and to deeply supercool them below their equilibrium liquidus temperatures, the liquids were processed without a container using the beamline electrostatic levitation (BESL) technique. The total static structure factor, S(q), and the total pair-correlation function, g(r), were obtained for all liquid compositions over a temperature range of approximately 250 °C; S(q) and g(r) were measured for the corresponding glasses at room temperature. All of the S(q)s have a shoulder on the high-q side of the second peak; this becomes more pronounced as the liquid is supercooled, and is most prominent in the glass. Based on a Honeycutt–Andersen analysis of the atomic configurations obtained from Reverse Monte Carlo fits to the total structure factors obtained from the scattering data, icosahedral short-range order (ISRO) is dominant in all liquids and becomes particularly pronounced in the glasses. No correlation is noted, however, between the amount of ISRO and easy glass formability. Structural features show evidence for an acceleration of ordering in the supercooled liquid above the glass transition temperature, consistent with the behavior expected for fragile liquids. This suggests that scattering data can provide a new method to assess liquid fragility, which is typically obtained from the temperature behavior of the viscosity near the glass transition temperature.

Mauro, N. A.↗

Oxygen vacancy ordering within anion-deficient Ceria

The structural properties of anion deficient ceria, CeO{sub 2-{delta}}, have been studied as a function of oxygen partial pressure, p(O{sub 2}), over the range 0>=log{sub 10p}(O{sub 2})>=-18.9 at 1273(2) K using the neutron powder diffraction technique. Rietveld refinement of the diffraction data collected on decreasing p(O{sub 2}) showed increases in the cubic lattice parameter, a, the oxygen nonstoichiometry, delta, and the isotropic thermal vibration parameters, u{sub Ce} and u{sub O}, starting at log{sub 10p}(O{sub 2}){approx}-11. The increases are continuous, but show a distinct kink at log{sub 10p}(O{sub 2}){approx}-14.5. Analysis of the total scattering (Bragg plus diffuse components) using reverse Monte Carlo (RMC) modelling indicates that the O{sup 2-} vacancies preferentially align as pairs in the <111> cubic directions as the degree of nonstoichiometry increases. This behaviour is discussed with reference to the chemical crystallography of the CeO{sub 2}-Ce{sub 2}O{sub 3} system at ambient temperature and, in particular, to the nature of the long-range ordering of O{sup 2-} vacancies within the crystal structure of Ce{sub 7}O{sub 12}. - Graphical abstract: Partial radial distribution function for oxygen vacancies within CeO{sub 1.710} at 1273 K (solid line) showing the increased tendency for local ordering in <111> directions compared to a random distribution (dashed line).

36 MATERIALS SCIENCE↗

Local deuterium order in apparently disordered Laves phase deuteride YFe{sub 2}D{sub 4.2}

Deuterium short-range order in cubic Laves phase deuteride YFe{sub 2}D{sub 4.2} was studied by neutron (ToF) powder diffraction experiments and Pair Distribution Function (PDF) analysis between 290 and 400 K. The minimal allowed D-D distance of 2.1 A in a metal deuteride (Switendick rule) has been experimentally proved in the HT-disordered phase YFe{sub 2}D{sub 4.2}. It has been found that the distribution of deuterium atoms around the iron is not random, and cannot be explained only by applying the Switendick rule. The first coordination sphere of iron atoms in the high temperature (HT)-disordered phase resembles between 350 and 400 K the coordination observed in the low temperature (LT)-ordered phase. Reversed Monte Carlo modeling of the Pair Distribution Function of the HT-disordered phase prefers the coordination FeD{sub 5} and FeD{sub 4} in agreement with the LT-ordered phase. - Graphical abstract: Deuterium short-range order in cubic Laves phase deuteride YFe{sub 2}D{sub 4.2} was studied by ToF neutron powder diffraction experiments and Pair Distribution Function analysis between 290 and 400 K. It has been found that the distribution of deuterium atoms around the iron is not random, and cannot be explained only by applying the Switendick rule. The first coordination sphere of iron atoms in the HT-disordered phase resembles that of the LT-ordered phase. Highlights: > Switendick rule has been experimentally proved in YFe{sub 2}D{sub 4.2}. > The distribution of deuterium in YFe{sub 2}D{sub 4.2} cannot be explained only by Switendick rule. > The first coordination sphere of iron in the disordered phase resembles the ordered one.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From fluorite to pyrochlore: Characterisation of local and average structure of neodymium zirconate, Nd{sub 2}Zr{sub 2}O{sub 7}

The structural characterisation of Nd{sub 2}Zr{sub 2}O{sub 7} prepared via a precursor route was performed using a combination of local and average structure probes (neutron total scattering, X-ray and neutron diffraction). We present the first total scattering and reverse Monte Carlo (RMC) modelling study of Nd{sub 2}Zr{sub 2}O{sub 7}, which provides compelling evidence for the adoption of a disordered fluorite-type structure by Nd{sub 2}Zr{sub 2}O{sub 7} prepared by a low-temperature precursor route. Annealing the material at high temperatures leads to a transformation to a pyrochlore-type structure; however, Rietveld refinement using powder neutron diffraction data shows that the oxygen sublattice retains a degree of disorder. - Graphical abstract: Display Omitted - Highlights: • The first total scattering and RMC modelling study of Nd{sub 2}Zr{sub 2}O{sub 7}. • Demonstration that the synthetic route influences the crystal structure adopted. • Insight into the importance of total scattering in studies of complex superstructures, especially for nano-sized materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Short- and medium-range order in Sb–Se glasses

Neutron diffraction measurements were performed to investigate the structure of Sb{sub x}Se{sub 100−x} bulk glasses with x=5, 10, 15, 20 and 25 at% Sb. The total pair distribution functions show two peaks at 2.36 Å and 2.64 Å, which are attributed to Se–Se and Sb–Se bonds, respectively. The coordination numbers calculated from these peaks indicate that Sb atoms are three-coordinated and Se atoms are two-coordinated for all the above compositions. However, the composition dependences of the first two peaks in the structure factors show an obvious change between 15 and 20 at% Sb, indicating that the medium-range structure is changed in this range of Sb content. In order to elucidate the medium-range structure, reverse Monte Carlo simulation was used with coordination number constraints. The structure models consisting of a mixture of the SbSe{sub 3/2} network and Se{sub n} chain clusters were in good agreement with neutron diffraction data for Se-rich glass (5, 10 and 15 at% Sb). On the other hand, a better fit was obtained for Sb{sub 25}Se{sub 75} glass with a model based on the network structure formed by connected SbSe{sub 3} units. - Graphical abstract: A 50 Å slice of the RMC configuration for Sb{sub 15}Se{sub 85} glass. - Highlights: • Sb atoms are three-coordinated and Se atoms are two-coordinated. • The medium-range structure changes between 15 and 20 at%. • The phase-separation tendency is observed in Se-rich glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural characterization of Mg-based bulk metallic glass and nanocomposite

New magnesium-based bulk metallic glasses Mg{sub 60}Cu{sub 30}Y{sub 10} have been prepared by pressure casting. Glassy alloys were successfully annealed to become nanocomposite containing 200 nm crystallites in an amorphous matrix. The microstructure of bulk glassy alloy and nanocomposite obtained during heat treatment was examined by X-ray diffraction and scanning and high-resolution electron microscopy. Metallic glass has been also studied to explain the structural characteristics by the reverse Monte Carlo (RMC) modeling based on the diffraction data. The HRTEM images allow to indicate some medium-range order (MRO) regions about 2–3 nm in size and formation of local atomic clusters. The RMC modeling results confirmed some kinds of short range order (SRO) structures. It was found that the structure of bulk metallic glass formed by the pressure casting is homogeneous. The composite material contained very small particles in the amorphous matrix. Homogeneous glassy alloy had better corrosion resistance than a composite containing nanocrystalline particles in a glassy matrix. - Highlights: • RMC modeling demonstrates some kinds of SRO structures in Mg-based BMGs. • HRTEM indicated MRO regions about 2–3 nm and SRO regions about 0.5 nm in size. • Mg-based glassy alloys were successfully annealed to become nanocomposite material. • Crystalline particles have spherical morphology with an average diameter of 200 nm. • Glassy alloy had higher corrosion resistance than a nanocomposite sample.

36 MATERIALS SCIENCE↗

Characterization of atomic-level structure in Fe-based amorphous and nanocrystalline alloy by experimental and modeling methods

The atomic structure of Fe{sub 70}Nb{sub 10}B{sub 20} alloy in “as-cast” state and after annealing was investigated using high-energy X-ray diffraction (XRD), Mössbauer spectroscopy (MS) and high resolution transmission electron microscopy (HRTEM). The HRTEM observations allowed to indicate some medium-range order (MRO) regions about 2 nm in size and formation of some kinds of short-range order (SRO) structures represented by atomic clusters with diameter ca. 0.5 nm. The Reverse Monte Carlo (RMC) method basing on the results of XRD measurements was used in modeling the atomic structure of Fe-based alloy. The structural model was described by peak values of partial pair correlation functions and coordination numbers determined by Mössbauer spectroscopy investigations. The three-dimensional configuration box of atoms was obtained from the RMC simulation and the representative Fe-centered clusters were taken from the calculated structure. According to the Gonser et al. approach, the measured spectra of alloy studied were decomposed into 5 subspectra representing average Fe–Fe coordination numbers. Basing on the results of disaccommodation of magnetic permeability, which is sensitive to the short order of the random packing of atoms, it was stated that an occurrence of free volume is not detected after nanocrystallization process. - Highlights: • Atomic cluster model of amorphous structure was proposed for studied glassy alloy. • Short range order (ca. 0.5 nm) regions interpreted as clusters were identified by HREM. • Clusters correspond to coordination numbers (N = 4,6,8,9) calculated by using Gonser approach. • Medium-range order (ca. 2 nm) could be referred to few atomic clusters. • SRO regions are able to grow up as nuclei of crystalline bcc Fe and iron borides. • Crystalline particles have spherical morphology with an average diameter of 20 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recent developments in Geant4

Geant4 is a software toolkit for the simulation of the passage of particles through matter. It is used by a large number of experiments and projects in a variety of application domains, including high energy physics, astrophysics and space science, medical physics and radiation protection. Over the past several years, major changes have been made to the toolkit in order to accommodate the needs of these user communities, and to efficiently exploit the growth of computing power made available by advances in technology. The adaptation of Geant4 to multithreading, advances in physics, detector modeling and visualization, extensions to the toolkit, including biasing and reverse Monte Carlo, and tools for physics and release validation are discussed here.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Crystal Structure and Atomic Vacancy Optimized Thermoelectric Properties in Gadolinium Selenides

Thermoelectric materials enable the energy conversion of waste heat into electricity, helpful to relieve global energy crisis. Here, we report a systematic investigation on high-temperature thermoelectric gadolinium selenides, cubic Gd 3-x Se 4 (x = 0.16, 0.21 and 0.25) and orthorhombic Gd 2 Se 3-y (y = 0.02, 0.06 and 0.08). High energy synchrotron x-ray diffraction and total scattering have been used to investigate the crystallographic and local structures. Atomic-scale clusters of Gd vacancy in the cubic phase are observed by employing the reverse Monte Carlo simulation. For cubic Gd 3-x Se 4 , adjusting Gd vacancy triggers the effect of multiple conduction bands, confirmed by the increase in effective masses and theoretical calculations. A reasonable peak zT value of 0.27 is achieved at 850 K for Gd 3-x Se 4 (x = 0.16). On the other hand, tuning Se vacancy enables the optimization of electron concentration for the orthorhombic Gd 2 Se 3-y . More significantly, its low deformation potential (Ξ = 12eV) gives rise to enhanced electron mobility and higher peak zT value of 0.54 at 850 K for Gd 2 Se 3-y (y = 0.02). Intriguingly, a higher zT of 1.2 at 1200 K is reasonably predicted by quality factor analysis. Finally, this work extends the scope of high-temperature thermoelectric materials and facilitates the exploration of novel high-temperature thermoelectric materials

36 MATERIALS SCIENCE↗

Local Chemical Strain in PtFe Alloy Nanoparticles

Precise deciphering of the atomic-insight chemical strain and distribution in nanosolids, especially in nanoalloys with disordered structure, is significant to correlate the structure and chemical properties. In this report, we found an abnormally enhanced negative thermal expansion (NTE) along the c axis in a 3.5 nm PtFe magnetic L1 0 alloy, which was usually weakened by the reduced contribution of invar behavior in a nanosized magnetic material. 57 Fe Mössbauer spectra and extended X-ray absorption fine structure studies indicated the local disordered state of chemical coordination of the L1 0 phase. Pair distribution function and reverse Monte Carlo simulation revealed a surface A1-phase coating and atomic-level stretching chemical strain on the heteroatomic pair along the c axis. Local tensile chemical strain and increasing magnetic moments of Fe atoms on the surface of the L1 0 core made a dominant contribution to the enhanced NTE behavior. Furthermore, the present work brings an atomic reveal for the local chemical strain in bimetallic nanomaterials and provides an innovative perspective to tailoring the functional properties according to the local chemical environment.

36 MATERIALS SCIENCE↗

Decoding Active Sites for Highly Efficient Semihydrogenation of Acetylene in Palladium–Copper Nanoalloys

Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd 34 Cu 66 nanocatalysts, outperforming most of the reported advanced catalysts. Further, t he quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd 34 Cu 66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.

36 MATERIALS SCIENCE↗

Local Chemical Ordering and Negative Thermal Expansion in PtNi Alloy Nanoparticles

An atomic insight into the local chemical ordering and lattice strain is particular interesting to recent emerging bimetallic nanocatalysts such as PtNi alloys. Here in this paper, we reported the atomic distribution, chemical environment and lattice thermal evolution in full-scale structural description of PtNi alloy nanoparticles (NPs). The different segregation of elements in the well-faceted PtNi nanoparticles is convinced by extended X-ray absorption fine structure (EXAFS). Atomic pair distribution function (PDF) study evidences the co-existence of the face-centered cubic and tetragonal ordering parts in the local environment of PtNi nanoparticles. Further reverse monte carlo (RMC) simulation with PDF data obviously exposed the segregation as Ni and Pt in the centers of {111} and {001} facets respectively. Layer-by-layer statistical analysis up to 6 nm for the local atomic pairs revealed the distribution of local tetragonal ordering on the surface. This local coordination environment facilitates the distribution of heteroatomic Pt-Ni pairs, which plays an important role in the negative thermal expansion of Pt 41 Ni 59 NPs. The present study on PtNi alloy NPs from local short-range coordination to long-range average lattice provides a new perspective on tailoring physical properties in nanomaterials.

36 MATERIALS SCIENCE↗

Resolving Atomic-Scale Structure and Chemical Coordination in High-Entropy Alloy Electrocatalysts for Structure–Function Relationship Elucidation

The recent breakthrough in confining five or more atomic species in nanocatalysts, referred to as high-entropy alloy nanocatalysts (HEAs), has revealed the possibilities of multielemental interactions that can surpass the limitations of binary and ternary electrocatalysts. The wide range of potential surface configurations in HEAs, however, presents a significant challenge in resolving active structural motifs, preventing the establishment of structure-function relationships for rational catalyst design and optimization. Here, we present a methodology for creating sub-5 nm HEAs using an aqueous-based peptide-directed route. Using a combination of pair distribution function and X-ray absorption spectroscopy, HEA structure models are constructed from reverse Monte Carlo modeling of experimental data sets and showcase a clear peptide-induced influence on atomic-structure and chemical miscibility. Coordination analysis of our structure models facilitated the construction of structure-function correlations applied to electrochemical methanol oxidation reactions, revealing the complex interplay between multiple metals that leads to improved catalytic properties. Our results showcase a viable strategy for elucidating structure-function relationships in HEAs, prospectively providing a pathway for future materials design.

36 MATERIALS SCIENCE↗

Elucidation of Peptide-Directed Palladium Surface Structure for Biologically Tunable Nanocatalysts

Peptide-enabled synthesis of inorganic nanostructures represents an avenue to access catalytic materials with tunable and optimized properties. This is achieved via peptide complexity and programmability that is missing in traditional ligands for catalytic nanomaterials. Unfortunately, there is limited information available to correlate peptide sequence to particle structure and catalytic activity to date. As such, the application of peptide-enabled nanocatalysts remains limited to trial and error approaches. In this paper, a hybrid experimental and computational approach is introduced to systematically elucidate biomolecule-dependent structure/function relationships for peptide-capped Pd nanocatalysts. Synchrotron X-ray techniques were used to uncover substantial particle surface structural disorder, which was dependent upon the amino acid sequence of the peptide capping ligand. Nanocatalyst configurations were then determined directly from experimental data using reverse Monte Carlo methods and further refined using molecular dynamics simulation, obtaining thermodynamically stable peptide-Pd nanoparticle configurations. Sequence-dependent catalytic property differences for C-C coupling and olefin hydrogenation were then eluddated by identification of the catalytic active sites at the atomic level and quantitative prediction of relative reaction rates. This hybrid methodology provides a clear route to determine peptide-dependent structure/function relationships, enabling the generation of guidelines for catalyst design through rational tailoring of peptide sequences

atomic pair distribution function↗

Peptide-Directed PdAu Nanoscale Surface Segregation: Toward Controlled Bimetallic Architecture for Catalytic Materials

Bimetallic nanoparticles are of immense scientific and technological interest given the synergistic properties observed when mixing two different metallic species at the nanoscale. This is particularly prevalent in catalysis, where bimetallic nanoparticles often exhibit improved catalytic activity and durability over their monometallic counterparts. Yet despite intense research efforts, little is understood regarding how to optimize bimetallic surface composition and structure synthetically using rational design principles. Recently, it has been demonstrated that peptide-enabled routes for nanoparticle synthesis result in materials with sequence-dependent catalytic properties, providing an opportunity for rational design through sequence manipulation. In this study, bimetallic PdAu nanoparticles are synthesized with a small set of peptides containing known Pd and Au binding motifs. The resulting nanoparticles were extensively characterized using high-resolution scanning transmission electron microscopy, X-ray absorption spectroscopy and high-energy X-ray diffraction coupled to atomic pair distribution function analysis. Structural information obtained from synchrotron radiation methods were then used to generate model nanoparticle configurations using reverse Monte Carlo simulations, which illustrate sequence-dependence in both surface structure and surface composition. Replica exchange solute tempering molecular dynamic simulations were also used to predict the modes of peptide binding on monometallic surfaces, indicating that different sequences bind to the metal interfaces via different mechanisms. As a testbed reaction, electrocatalytic methanol oxidation experiments were performed, wherein differences in catalytic activity are clearly observed in materials with identical bimetallic composition. Finally, taken together, this study indicates that peptides could be used to arrive at bimetallic surfaces with enhanced catalytic properties, which could be leveraged for rational bimetallic nanoparticle design using peptide-enabled approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoporous Structure and Medium-Range Order in Synthetic Amorphous Calcium Carbonate

We adopt a reverse Monte Carlo refinement approach, using experimental X-ray total scattering data, to develop a structure model for synthetic, hydrated amorphous calcium carbonate (ACC). The ACC is revealed to consist of a porous calcium-rich framework that supports interconnected channels containing water and carbonate molecules. The existence of a previously unrecognized nanometer-scale channel network suggests mechanisms of how additives can be accommodated within the structure and provide temporary stabilization, as well as influence the crystallization process. Moreover, while lacking long-range order, the calcium-rich framework in the ACC contains similar Ca packing density to that present in calcite, aragonite, and vaterite, yielding clues of how the amorphous material converts into the different crystalline forms. Our results provide a new starting point for advancing our understanding of biomineralization as well as the development of biomimetic approaches to next-generation materials synthesis.

58 GEOSCIENCES↗

Structure and Transformation of Amorphous Calcium Carbonate: A Solid-State 43Ca NMR and Computational Molecular Dynamics Investigation

Amorphous calcium carbonate (ACC) is a metastable precursor to crystalline CaCO{sub 3} phases that precipitates by aggregation of ion pairs and prenucleation clusters. We use {sup 43}Ca solid-state NMR spectroscopy to probe the local structure and transformation of ACC synthesized from seawater-like solutions with and without Mg{sup 2+} and computational molecular dynamics (MD) simulations to provide more detailed molecular-scale understanding of the ACC structure. The {sup 43}Ca NMR spectra of ACC collected immediately after synthesis consist of broad, featureless resonances with Gaussian line shapes (FWHH = 27.6 {+-} 1 ppm) that do not depend on Mg{sup 2+} or H{sub 2}O content. A correlation between {sup 43}Ca isotropic chemical shifts and mean Ca-O bond distances for crystalline hydrous and anhydrous calcium carbonate phases indicates indistinguishable maximum mean Ca-O bond lengths of {approx}2.45 {angstrom} for all our samples. This value is near the upper end of the published Ca-O bond distance range for biogenic and synthetic ACCs obtained by Ca-X-ray absorption spectroscopy. It is slightly smaller than the values from the structural model of Mgfree ACC by Goodwin et al. obtained from reverse Monte Carlo (RMC) modeling of X-ray scattering data and our own computational molecular dynamics (MD) simulation based on this model. An MD simulation starting with the atomic positions of the Goodwin et al. RMC model using the force field of Raiteri and Gale shows significant structural reorganization during the simulation and that the interconnected carbonate/water-rich channels in the Goodwin et al. model shrink in size over the 2 ns simulation time. The distribution of polyhedrally averaged Ca-O bond distances from the MD simulation is in good agreement with the {sup 43}Ca NMR peak shape, suggesting that local structural disorder dominates the experimental line width of ACC.

36 MATERIALS SCIENCE↗