Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resource mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Thailand national programme of the earth resources technology satellite

The author has identified the following significant results. Accomplishments include the identification of a series of active alluvial fans along the margins of the Central Plain, the compilation of crop resources maps of central and eastern Thailand, and evaluation of the Purdue/LARS printout using unsupervised mode of an area near Bangkok. Results from LANDSAT 1 imagery and ground truth survey showed that Thailand existing forest in 1973 covered an area of approximately 37% of total land area. The last countrywide survey using aerial photographs at 1:60,000 scale conducted in 1961 gave the figure of 58%. Experience has shown many advantages of LANDSAT imagery over the conventional aerial photography in locating faults and fractures in the preparation of tectonic maps. Several rock types can also be identified from LANDSAT imagery.

Sabhasri, S.↗

Design and fabrication of nosecone for WB-57F aircraft fitted with APQ-102A side looking radar

The design, fabrication, and testing of a nose cone which included a radome for a NASA WB-57F high altitude natural resources mapping aircraft was reviewed. The plane was fitted with a APQ-102A side looking radar operating at 9.6 GHz. The radar is directed normally to the direction of the flight and downward by a changeable angle, and it is assumed that the axis of the plane will not deviate from this direction by more than + or - 6 deg. The radome is required to subtend an angle of 160 deg centered 30 deg below the left horizon.

Source record↗

Digital preprocessing and classification of multispectral earth observation data

The development of airborne and satellite multispectral image scanning sensors has generated wide-spread interest in application of these sensors to earth resource mapping. These point scanning sensors permit scenes to be imaged in a large number of electromagnetic energy bands between .3 and 15 micrometers. The energy sensed in each band can be used as a feature in a computer based multi-dimensional pattern recognition process to aid in interpreting the nature of elements in the scene. Images from each band can also be interpreted visually. Visual interpretation of five or ten multispectral images simultaneously becomes impractical especially as area studied increases; hence, great emphasis has been placed on machine (computer) techniques for aiding in the interpretation process. This paper describes a computer software system concept called LARSYS for analysis of multivariate image data and presents some examples of its application.

Anuta, P. E.↗

Alignment techniques required by precise measurement of effective focal length

The characteristics of false color imagery produced by instrumentation on earth resource mapping satellites are examined. The spatial fidelity of the imagery is dependent upon the geometric accuracy (GA) and the band-to-band registration (BBR) with which the telescope instrument is assembled. BBR and GA require knowledge of telescope effective focal length (EFL) to one part in 10,000 in order that the next generation of earth mappers be able to carry out their missions. The basis for this level of precision is briefly considered, and a description is given of the means by which such precise EFL measurements have been carried out. Attention is given to accuracy requirements, the technique used to measure effective focal length, possible sources of error in the EFL measurement, approaches for eliminating errors, and the results of the efforts to control measurement errors in EFL determinations.

Wise, T. D.↗

Synthesis of regional crust and upper-mantle structure from seismic and gravity data

Available seismic and ground based gravity data are combined to infer the three dimensional crust and upper mantle structure in selected regions. This synthesis and interpretation proceeds from large-scale average models suitable for early comparison with high-altitude satellite potential field data to more detailed delineation of structural boundaries and other variations that may be significant in natural resource assessment. Seismic and ground based gravity data are the primary focal point, but other relevant information (e.g. magnetic field, heat flow, Landsat imagery, geodetic leveling, and natural resources maps) is used to constrain the structure inferred and to assist in defining structural domains and boundaries. The seismic data consists of regional refraction lines, limited reflection coverage, surface wave dispersion, teleseismic P and S wave delay times, anelastic absorption, and regional seismicity patterns. The gravity data base consists of available point gravity determinations for the areas considered.

Alexander, S. S.↗

Multispectral Dual-Aperture Schmidt Objective

Off-axis focal planes make room for beam splitters. System includes two off-axis primary spherical reflectors, each concentric with refractive corrector at aperature. Off-axis design assures large aperture required for adequate spatial resolution. Separate images have precise registration, used for multispectral resource mapping or remote sensing.

Minott, P. O.↗

Using LANDSAT to update the Schoharlie County, New York, land cover inventory

A demonstration project to examine the utility of LANDSAT at the county and local government level is discussed. The project deals with the updating of the New York State land use and natural resources maps, valuable planning and development tools utilized by county governments. Both the feasibility of producing these maps and the transferability of them to the county government level are evaluated.

Baumann, P. R.↗

The statewide forest/nonforest classification of Pennsylvania using Landsat MSS data

A procedure is described for processing the large volume of data needed to generate a Landsat-derived forest resource map (forest/nonforest mask) for the state of Pennsylvania, for use in a defoliation assessment program. Landsat coverage of the 28 million acres encompassing Pennsylvania requires portions of ten Landsat frames, totalling approximately 76 million pixels. A prime effort of this project was to efficiently and accurately classify this data into forest or nonforest categories. A specialized approach to Bayesian classification was developed which involved the use of MSS5 and MSS7; the identification of a single class, forest; and the use of the confidence map to generate the forest/nonforest mask. Statewide, for 7-acre contiguous forest areas, the overall agreement achieved between the mask and reference data was 90 percent.

Russo, S. A.↗

Compact Imaging Spectrometer

Imaging spectrometer for use in crop and mineral resource-mapping experiments is scaled-down version. Compact imaging spectrometer uses Schmidt/Littrow optics with single spherical primary mirror. Radiation from scene strikes reflecting Schmidt corrector plate located near center of curvature of primary spherical mirror.

Wellman, J. B.↗

Shuttle Experimental Radar for Geological Exploration (SERGE) project: Field work relating to the Shuttle Experimental Radar A (SIR-A) in Brazil (phase 2)

The ground observations undertaken over the northern position of Minas Gerais State, and part of Distrito Federal from 7 to 12 December 1982, along the Space Shuttle 2 flying orbit 22 of November 1981 are described. Field data related mostly with lithology, geological structures and forest cover, and specific geomorphological and pedological aspects were collected. Ground data are applied to evaluate the SIR-A Experiment, developed in the Space Shuttle-2 mission for natural resources mapping and prospecting.

Balieiro, M. G.↗

High Energy Density Regenerative Fuel Cell Systems for Terrestrial Applications

Regenerative Fuel Cell System (RFCS) technology for energy storage has been a NASA power system concept for many years. Compared to battery-based energy storage systems, RFCS has received relatively little attention or resources for development because the energy density and electrical efficiency were not sufficiently attractive relative to advanced battery systems. Even today, RFCS remains at a very low technology readiness level (TRL of about 2 indicating feasibility has been demonstrated). Commercial development of the Proton Exchange Membrane (PEM) fuel cells for automobiles and other terrestrial applications and improvements in lightweight pressure vessel design to reduce weight and improve performance make possible a high energy density RFCS energy storage system. The results from this study of a lightweight RFCS energy storage system for a remotely piloted, solar-powered, high altitude aircraft indicate an energy density up to 790 w-h/kg with electrical efficiency of 53.4% is attainable. Such an energy storage system would allow a solar-powered aircraft to carry hundreds of kilograms of payload and remain in flight indefinitely for use in atmospheric research, earth observation, resource mapping. and telecommunications. Future developments in the areas of hydrogen and oxygen storage, pressure vessel design, higher temperature and higher- pressure fuel cell operation, unitized regenerative fuel cells, and commercial development of fuel cell technology will improve both the energy density and electrical efficiency of the RFCS.

Burke, Kenneth A.↗

Accounting and Accountability for Distributed and Grid Systems

While the advent of distributed and grid computing systems will open new opportunities for scientific exploration, the reality of such implementations could prove to be a system administrator's nightmare. A lot of effort is being spent on identifying and resolving the obvious problems of security, scheduling, authentication and authorization. Lurking in the background, though, are the largely unaddressed issues of accountability and usage accounting: (1) mapping resource usage to resource users; (2) defining usage economies or methods for resource exchange; (3) describing implementation standards that minimize and compartmentalize the tasks required for a site to participate in a grid.

Thigpen, William↗

Inflatably Deployed Membrane Waveguide Array Antenna for Space

As an alternative to parabolic antennas and Synthetic Aperture Radar (SAR) systems, waveguide arrays offer another method of providing RF transmit/receive communication apertures for spacecraft. The advantage of the membrane waveguide array concept, in addition to its lightweight and low packaged volume, is its inherent shape. Relative to parabolic antennas, the requirement to make an accurate doubly curved surface is removed. L'Garde and Langley Research Center (LaRC), are currently working in this area to develop lightweight waveguide array technologies utilizing thin film membrane structures. Coupled with an ultra-lightweight inflatably deployed rigidizable planar support structure, the system offers a very compelling technology in the fields of space-based radar, communications, and earth resource mapping.

Lichodziejewski, David↗

Overview of the Volatiles Investigating Polar Exploration Rover

The Volatiles Investigating Polar Exploration Rover (VIPER) is a lunar volatiles detection and measurement mission. VIPER will be launched to the Moon in late 2023 as a payload on the Commercial Lunar Payload Services(CLPS) flight provided by Astrobotic's Griffin lander. The VIPER rover is a solar powered, mobile robot de-signed to traverse up to 20 km during a mission lasting up to four lunar days. After landing in a south polar region, the VIPER rover will travel to investigate a range of Ice Stability Regions (ISRs) across scales from 100s of meters to kilometers and conduct surface and subsurface assessment of lunar water and other volatiles. VIPER includes a suite of rover-mounted instruments(three spectrometers and a drill), which the VIPER science mission team will use to characterize the nature of the volatiles and to create global lunar water resource maps.

planetary rover↗

Science, Exploration and the Human Experience.

Dr. Darlene S. Lim is a research scientist at NASA's Ames Research Center in California's Silicon Valley, and the Deputy Project Scientist and Science Operations Lead for NASA's Volatiles Investigating Polar Exploration Rover (VIPER) Lunar Mission. The VIPER lunar rover mission is a mobile robot that will go to the South Pole of the Moon to get a close-up view of the location and concentration of water ice that could eventually be harvested to sustain human exploration on the Moon, Mars — and beyond. VIPER represents the first resource mapping mission on another celestial body and presents a unique operational paradigm within the history of robotic spaceflight. Throughout her career, Darlene has led several NASA-funded programs that have been focused on blending field science research with the development of capabilities and concepts for future human-robotic spaceflight to the Moon and Mars. These research activities have taken her around the world, from pole to pole, land to sea, and to many lakes in between, where she has studied life in extreme environments, the way people conduct science, and how they need to be supported in their work of discovery and exploration. At the center of each of these endeavors is the human - the person who must interact with others, with technology, and with the environment of interest, to apply the scientific method towards the accrual and expansion of knowledge about the planet that we live on and beyond. Darlene has been working with teams of scientists and engineers from a variety of disciplines to hone her understanding of the process by which their interactions and research needs can be supported and enabled under intense operational conditions such as those associated with Moon and Mars exploration. Darlene’s presentation will take the audience through the arc of her research over the past two decades culminating in her on-going work with the NASA VIPER lunar rover mission.

Darlene Sze Shien Lim↗

VIPER’s Mass Spectrometer observing lunar operations (MSolo)

The Volatiles Investigating Polar Exploration Rover (VIPER) is a lunar volatiles detection and measurement mission that will land on Mons Mouton near Nobile crater, close to the Moon’s south pole. One of the analytical instruments embedded within the rover is the Mass Spectrometer observing lunar operations (MSolo) instrument. VIPER’s data will ultimately be used to create lunar water resource maps that may enable a sustained presence on the lunar surface. As VIPER navigates several kilometers of terrain, its onboard analytical instrumentation will characterize the presence of volatiles along the traverse path and identify candidate locations for drilling. Upon selection of a drilling site, the rover will position itself and deploy an auguring, percussive drill down to a meter depth. Upon extraction, regolith cuttings captured by the auger are deposited on the surface; an activity that will initiate the release of any volatile gases that are subsequently detected and quantified by MSolo. MSolo is designed to identify low-molecular-weight volatiles (between m/z 1-100) with unit mass resolution. Volatiles of interest include D/H and O18/O16 bearing species, including possible water contained within the lunar regolith. MSolo is a modified, commercial off-the-shelf (COTS) system, meaning the instrument is based on a commercially available unit that has been ruggedized for space applications.

MSolo↗

Experiments in infrared multispectral mapping of earth resources

Two evolutionary infrared remote sensing experiments provide the basis for the development of an operational mapping capability for geology exploration. A 10-band radiometer scheduled for an early Shuttle flight has completed an aircraft flight program which demonstrated the utility of a number of narrow spectral channels. A multispectral mapper utilizing an infrared area array detector to acquire simultaneous images in multiple wavelengths is being assembled. A design concept for an operational sensor which employs area arrays for registered multispectral image data acquisition is under study. The sensor would utilize onboard spectral band selection, radiometric correction, and data compression to satisfy the demanding requirements of the user community.

Wellman, J. B.↗

Regional inventories and mapping of land resources and environmental geology using remotely sensed data

Black-and-white stereoscopic aerial photographs at a scale of 1:20,000, 1:40,000, and 1:65,000 and controlled aerial photo mosaics at a scale of 1:24,000 were the basic data utilized for most mapping. Color and color infrared aerial photography (1:20,000) was employed to man the barrier islands, and color infrared photography (1:120,000) was used to map sand and mud units of the coastal plain north of Houston. LANDSAT-1 imagery in Bands 4, 5, and 7 (1:250,000) was utilized to examine land use and certain resource units statewide. Side scanning radar and LANDSAT imagery were studied experimentally toward mapping land suitability units in carbonate terranes with high relief and certain other terranes. Large-scale color and color infrared aerial stereoscopic photographs supply the most information for regional mapping. black-and-white photography is the most practical data for mapping because of scale, complete coverage, availability, and relatively low cost.

Wermund, E. G.↗