Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “remote sensing surface reflectance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Radiative transfer in shrub savanna sites in Niger: Preliminary results from HAPEX-Sahel. Part 1: Modelling surface reflectance using a geometric-optical approach

To use optical remote sensing to monitor land surface-climate interactions over large areas, algorithms must be developed to relate multispectral measurements to key variables controlling the exchange of matter (water, carbon dioxide) and energy between the land surface and the atmosphere. The proportion of the ground covered by vegetation and the interception of photosynthetically active radiation (PAR) by vegetation are examples of two variables related to evapotranspiration and primary production, respectively. An areal-proportion model of the multispectral reflectance of shrub savanna, composed of scattered shrubs with a grass, forb or soil understory, predicted the reflectance of two 0.5 km(exp 2) sites as the area-weighted average of the shrub and understory or 'background' reflectances. Although the shaded crown and shaded background have darker reflectances, ignoring them in the area-weighted model is not serious when shrub cover is low and solar zenith angle is small. A submodel predicted the reflectance of the shrub crown as a function of the foliage reflectance and amount of plant material within the crown, and the background reflectance scattered or transmitted through canopy gaps (referred to as a soil-plant 'spectral interaction' term). One may be able to combine these two models to estimate both the fraction of vegetation cover and interception of PAR by green vegetation in a shrub savanna.

Franklin, Janet↗
NASA NTRS2023

Assessment of the Performance of the Atmospheric Correction Algorithm MAJA for Sentinel-2 Surface Reflectance Estimates

The correction of atmospheric effects on optical remote sensing products is an essential component of Analysis Ready Data (ARD) production lines. The MAJA processor aims at providing accurate time series of surface reflectances over land for satellite missions, such as Sentinel-2, Venμs, and Landsat 8. The Centre d’Études Spatiales de la Biosphère (CESBIO) and the Centre National d’Études Spatiales (CNES) share a common effort to maintain, validate, and improve the MAJA processor, using state-of-the-art ground measurement sites, and participating in processor inter-comparisons, such as the Atmospheric Correction Intercomparison Exercise (ACIX). While contributing to the second ACIX-II Land validation exercise, it was found that the candidate MAJA dataset could not adequately be compared to the main reference dataset. MAJA reflectances were corrected for adjacency and topography effects while the reference dataset was not, excluding MAJA from a part of the performance metrics of the exercise. The first part of the following study aims at providing complementary performance assessment to ACIX-II by reprocessing MAJA surface reflectances without adjacency nor topographic correction, allowing for an un-biased full resolution comparison with the reference Sentinel-2 dataset. The second part of the study consists of validating MAJA against surface reflectance measurements time series of up to five years acquired at three automated stations. Both approaches provide extensive insights on the quality of MAJA Sentinel-2 Level 2 products.

ROSAS↗
NASA NTRS1999

Bidirectional Reflectance of a Macroscopically Flat, High-Albedo Particulate Surface: An Efficient Radiative Transfer Solution and Applications to Regoliths

Many remote sensing applications rely on accurate knowledge of the bidirectional reflection function (BRF) of surfaces composed of discrete, randomly positioned scattering particles. Theoretical computations of BRFs for plane-parallel particulate layers are usually reduced to solving the radiative transfer equation (RTE) using one of existing exact or approximate techniques. Since semi-empirical approximate approaches are notorious for their low accuracy, violation of the energy conservation law, and ability to produce unphysical results, the use of numerically exact solutions of RTE has gained justified popularity. For example, the computation of BRFs for macroscopically flat particulate surfaces in many geophysical publications is based on the adding-doubling (AD) and discrete ordinate (DO) methods. A further saving of computer resources can be achieved by using a more efficient technique to solve the plane-parallel RTE than the AD and DO methods. Since many natural particulate surfaces can be well represented by the model of an optically semi-infinite, homogeneous scattering layer, one can find the BRF directly by solving the Ambartsumian's nonlinear integral equation using a simple iterative technique. In this way, the computation of the internal radiation field is avoided and the computer code becomes highly efficient and very accurate and compact. Furthermore, the BRF thus obtained fully obeys the fundamental physical laws of energy conservation and reciprocity. In this paper, we discuss numerical aspects and the computer implementation of this technique, examine the applicability of the Henyey-Greenstein phase function and the sigma-Eddington approximation in BRF and flux calculations, and describe sample applications demonstrating the potential effect of particle shape on the bidirectional reflectance of flat regolith surfaces. Although the effects of packing density and coherent backscattering are currently neglected, they can also be incorporated. The FORTRAN implementation of the technique is available on the World Wide Web, and can be applied to a wide range of remote sensing problems. BRF computations for undulated (macroscopically rough) surfaces are more complicated and often rely on time consuming Monte Carlo procedures. This approach is especially inefficient for optically thick, weakly absorbing media (e.g., snow and desert surfaces at visible wavelengths since a photon may undergo many internal scattering events before it exists the medium or is absorbed. However, undulated surfaces can often be represented as collections of locally flat tilted facets characterized by the BRF found from the traditional plane parallel RTE. In this way the MOnte Carlo procedure could be used only to evaluate the effects of surface shadowing and multiple surface reflections, thereby bypassing the time-consuming ray tracing inside the medium and providing a great savings of CPU time.

Mishchenko, Michael I.↗
NASA NTRS1987

Effects of aerosols and surface shadowing on bidirectional reflectance measurements of deserts

Desert surfaces are probably one of the most stable of the Earth's natural targets for remote sensing. The bidirectional reflectance properties of the Saudi Arabian desert was investigated during the Summer Monsoon Experiment (Summer Monex). A comparison of high-altitude with near-surface measurements of the White Sands desert showed significant differences. These discrepancies have been attributed to forward scattering of the dust-laden atmosphere prevalent during Summer Monex. This paper is concerned in general with modeling the effects of atmospheric aerosols and surface shadowing on the remote sensing of bidirectional reflectance factors of desert targets, and in particular with comparing the results of these models with flight results. Although it is possible to approximate the latter, it is felt that a surface reflectance model with a smaller specular component would have permitted using a more realistic set of atmospheric conditions in the simulations.

Bowker, David E.↗
NASA NTRS1992

Reflectance spectroscopy and GEX simulation of palagonite and iron-rich montmorillonite clay mixtures: Implications for the surface composition of Mars

Because of the power of remote sensing reflectance spectroscopy in determining mineralogy, it has been used as the major method of identifying a possible mineral analogue of the martian surface. A summary of proposed martian surface compositions from reflectance spectroscopy before 1979 was presented by Singer et al. Since that time, iron-rich montmorillonite clay, nanocrystalline or nanophase hematite, and palagonite have been suggested as Mars soil analogue materials. Palagonite in petrological terms is best described as an amorphous, hydrated, ferric iron, silica gel. Montmorillonite is a member of the smectite clay group, and its structure is characterized by an octahedral sheet in coordination with two tetrahedral sheets in which oxygen atoms are shared. The crystal unity of montmorillonite is well defined in contrast to palagonite where it is considered amorphous or poorly crystalline at best. Because of the absence of the diagnostic strong 2.2-micron reflectance band characteristic of clays in the near-infrared (NIR) spectrum of Mars and palagonite and based upon a consideration of wide wavelength coverage (0.3-50 microns), Roush et al. concluded that palagonite is a more likely Mars surface analogue. In spite of the spectral agreement of palagonite and the Mars reflectance spectrum in the 2.2-micron region, palagonite shows poor correspondence with the results of the Viking LR experiment. In contrast, iron-rich montmorillonite clays show relatively good agreement with the results of the Viking LR experiment. This spectral study was undertaken to evaluate the spectral properties of mixtures of palagonite and Mars analogue iron-rich montmorillonite clay (16-18 wt. percent Fe as Fe2O3) as a Mars surface mineralogical model. Mixtures of minerals as Mars surface analogue materials have been studied before, but the mixtures were restricted to crystalline clays and iron oxides.

Orenberg, J. B.↗
NASA NTRS1991

Application of Hapke photometric model to three geologic surfaces using PARABOLA bidirectional reflection data

The Geologic Remote Sensing Field Experiment (GRSFE) was conducted in July and September of 1989 to collect data with both ground and airborne instrumentation. A major objective of GRSFE was to collect data which could be used to test radiative transfer models for the extraction of composition and textural surface properties from remotely acquired data. Reported here are the initial results from an application of the Hapke photometric model, using data from the Portable Apparatus for Remote Acquisition of Bidirectional Observations of Land and Atmosphere (PARABOLA), a ground based radiometer with three spectral channels. PARABOLA data was collected in the Lunar Crater Volcanic Field in Nevada, specifically from the region of Lunar Lake, a playa. The Hapke model was found to be inadequate for three relatively common geologic surfaces (a clay-rich, hard packed surface with decimeter sized mudcracks; a cobble site, similar to a playa site, but strewn with basaltic cobbles and pebbles; and a surface mantled basalt lava flow). The model is not at fault; rather, the complexity of most geologic surfaces is not accounted for in the initial assumptions.

Shepard, Michael K.↗
NASA NTRS1985

Atmospheric and Science Complexity Effects on Surface Bidirectional Reflectance

Among the tools used in passive remote sensing of Earth resources in the visible and near-infrared spectral regions are measurements of spectral signature and bidirectional reflectance functions (BDRFs). Determination of surface properties using these observables is complicated by a number of factors, including: (1) mixing of surface components, such as soil and vegetation, (2) multiple reflections of radiation due to complex geometry, such as in crop canopies, and (3) atmospheric effects. In order to bridge the diversity in these different approaches, there is a need for a fundamental physical understanding of the influence of the various effects and a quantiative measure of their relative importance. In particular, we consider scene complexity effects using the example of reflection by vegetative surfaces. The interaction of sunlight with a crop canopy and interpretation of the spectral and angular dependence of the emergent radiation is basically a multidimensional radiative transfer problem. The complex canopy geometry, underlying soil cover, and presence of diffuse as well as collimated illumination will modify the reflectance characteristics of the canopy relative to those of the individual elements.

Diner, D. J.↗
NASA NTRS1994

Ocean color remote sensing using polarization properties of reflected sunlight

The effects of the atmosphere and surface on sunlight backscattered to space by the ocean may be substantially reduced by using the unpolarized component of reflectance instead of total reflectance. At 450 nm, a wavelength of interest in ocean color remote sensing, and for typical conditions, 45% of the unpolarized reflectance may originate from the water body instead of 20% of the total reflectance, which represents a gain of a factor 2.2 in useful signal for water composition retrieval. The best viewing geometries are adjacent to the glitter region; they correspond to scattering angles around 100 deg, but they may change slightly depending on the polarization characteristics of the aerosols. As aerosol optical thickness increases, the atmosphere becomes less efficient at polarizing sunlight, and the enhancement of the water body contribution to unpolarized reflectance is reduced. Since the perturbing effects are smaller on unpolarized reflectance, at least for some viewing geometries, they may be more easily corrected, leading to a more accurate water-leaving signal and, therefore, more accurate estimates of phytoplankton pigment concentration.

R. Frouin↗
NASA NTRS2011

Multiangle Implementation of Atmospheric Correction (MAIAC):: Radiative Transfer Basis and Look-up Tables - 1

This paper describes a radiative transfer basis of the algorithm MAIAC which performs simultaneous retrievals of atmospheric aerosol and bidirectional surface reflectance from the Moderate Resolution Imaging Spectroradiometer (MODIS). The retrievals are based on an accurate semianalytical solution for the top-of-atmosphere reflectance expressed as an explicit function of three parameters of the Ross-Thick Li-Sparse model of surface bidirectional reflectance. This solution depends on certain functions of atmospheric properties and geometry which are precomputed in the look-up table (LUT). This paper further considers correction of the LUT functions for variations of surface pressure/height and of atmospheric water vapor, which is a common task in the operational remote sensing. It introduces a new analytical method for the water vapor correction of the multiple ]scattering path radiance. It also summarizes the few basic principles that provide a high efficiency and accuracy of the LUT ]based radiative transfer for the aerosol/surface retrievals and optimize the size of LUT. For example, the single-scattering path radiance is calculated analytically for a given surface pressure and atmospheric water vapor. The same is true for the direct surface-reflected radiance, which along with the single-scattering path radiance largely defines the angular dependence of measurements. For these calculations, the aerosol phase functions and kernels of the surface bidirectional reflectance model are precalculated at a high angular resolution. The other radiative transfer functions depend rather smoothly on angles because of multiple scattering and can be calculated at coarser angular resolution to reduce the LUT size. At the same time, this resolution should be high enough to use the nearest neighbor geometry angles to avoid costly three ]dimensional interpolation. The pressure correction is implemented via linear interpolation between two LUTs computed for the standard and reduced pressure levels. A linear mixture and a modified linear mixture methods are used to represent different aerosol types in the aerosol/surface retrievals from several base models of the fine and coarse aerosol fractions. In summary, the developed LUT algorithm allows fast high-accuracy simulations of the outgoing radiance with full variability of the atmospheric and surface bidirectional reflectance properties for the aerosol/surface remote sensing.

Lyapustin, Alexei↗
NASA NTRS1994

Observations in the solar spectrum interest for remote sensing purposes

The polarization of the sunlight scattered by atmospheric aerosols or cloud droplets and reflected from ground surfaces or plant canopies may convey much information when used for remote sensing purposes. The typical polarization features of aerosols, cloud droplets, and plant canopies, as observed by ground based and airborne sensors, are investigated, looking especially for those invariant properties amenable to description by simple models when possible. The question of polarization measurements from space is addressed. The interest of such measurements for remote sensing purposes is investigated, and their feasibility is tested by using results obtained during field campaigns of the airborne POLDER instrument, a radiometer designed to measure the directionality and polarization of the sunlight scattered by the ground atmosphere system.

Herman, M.↗
NASA NTRS1982

Characterization of tropospheric desert aerosols at solar wavelengths by multispectral radiometry from Landsat

Characteristics of tropospheric desert aerosols are derived by comparing nadir spectral reflectivities computed from the radiative transfer models with reflectivities measured from Landsat. Over the ocean, reflectivities are compared, but over land the comparison is carried out by determining the ratios of the nadir reflectivity of the surface-atmosphere system over heavy aerosol concentration to the reflectivity of the underlying surface. This remote sensing technique is found to be a sensitive approach for measuring n sub 2, the imaginary part of the refractive index. The desert aerosols under study, in the Iran and Pakistan area, are essentially pure scatterers, inasmuch as an n sub 2 value of 0.001 + or - 0.001 was determined for each of the four Landsat spectral bands, that is, for a spectral interval from 0.5 to 1.1 microns.

Otterman, J.↗
NASA NTRS2007

Using NASA Techniques to Atmospherically Correct AWiFS Data for Carbon Sequestration Studies

Carbon dioxide is a greenhouse gas emitted in a number of ways, including the burning of fossil fuels and the conversion of forest to agriculture. Research has begun to quantify the ability of vegetative land cover and oceans to absorb and store carbon dioxide. The USDA (U.S. Department of Agriculture) Forest Service is currently evaluating a DSS (decision support system) developed by researchers at the NASA Ames Research Center called CASA-CQUEST (Carnegie-Ames-Stanford Approach-Carbon Query and Evaluation Support Tools). CASA-CQUEST is capable of estimating levels of carbon sequestration based on different land cover types and of predicting the effects of land use change on atmospheric carbon amounts to assist land use management decisions. The CASA-CQUEST DSS currently uses land cover data acquired from MODIS (the Moderate Resolution Imaging Spectroradiometer), and the CASA-CQUEST project team is involved in several projects that use moderate-resolution land cover data derived from Landsat surface reflectance. Landsat offers higher spatial resolution than MODIS, allowing for increased ability to detect land use changes and forest disturbance. However, because of the rate at which changes occur and the fact that disturbances can be hidden by regrowth, updated land cover classifications may be required before the launch of the Landsat Data Continuity Mission, and consistent classifications will be needed after that time. This candidate solution investigates the potential of using NASA atmospheric correction techniques to produce science-quality surface reflectance data from the Indian Remote Sensing Advanced Wide-Field Sensor on the RESOURCESAT-1 mission to produce land cover classification maps for the CASA-CQUEST DSS.

Holekamp, Kara L.↗
NASA NTRS2021

Using Remote Sensing to Monitor the Spring Phenology of Acadia National Park Across Elevational Gradients

Greenup dates and their responses to elevation and temperature variations across the mountains of Acadia National Park are monitored using remote sensing data, including Landsat 8 surface reflectances (at a 30-m spatial resolution) and VIIRS reflectances adjusted to a nadir view (gridded at a 500-m spatial resolution), during the 2013–2016 growing seasons. The 30-m resolution provides a better scale for studying the phenology variation across elevational gradients than the 500-m resolution, as greenup dates monitored at 30-m scale have better agreement with leaf-out dates recorded in the field alongside the north–south-oriented hiking trails on three of the park’s tallest mountains (466 m, 418 m, and 380 m), and can provide landcover-specific analysis. The spring phenology responses to temperature and elevation vary among different spatial scales. Greenup dates of Acadia National Park monitored at 30-m scale show a weak advancing trend with higher spring temperature, while greenup dates monitored at 500 m show a weak delaying trend. The species mix within landcover at 30-m scale could weaken the advancing trend detected at field observation level. The landcover mix and elevation variation within 500-m scale could alter the spring phenology response to spring temperature variation. Greenup dates monitored at both 30-m and 500-m scales vary among different elevational zones, aspects, landcovers, and years. However, the relationship between greenup dates and elevation is rather weak.

Yan Liu↗
NASA NTRS2009

TOGA - A GNSS Reflections Instrument for Remote Sensing Using Beamforming

Remotely sensing the Earth's surface using GNSS signals as bi-static radar sources is one of the most challenging applications for radiometric instrument design. As part of NASA's Instrument Incubator Program, our group at JPL has built a prototype instrument, TOGA (Time-shifted, Orthometric, GNSS Array), to address a variety of GNSS science needs. Observing GNSS reflections is major focus of the design/development effort. The TOGA design features a steerable beam antenna array which can form a high-gain antenna pattern in multiple directions simultaneously. Multiple FPGAs provide flexible digital signal processing logic to process both GPS and Galileo reflections. A Linux OS based science processor serves as experiment scheduler and data post-processor. This paper outlines the TOGA design approach as well as preliminary results of reflection data collected from test flights over the Pacific ocean. This reflections data demonstrates observation of the GPS L1/L2C/L5 signals.

GPS↗
NASA NTRS2003

OMEGA Observations of Mars Analogue Rocks

In the last 20 years, imaging spectrometry in the visible and near infrared onboard spacecraft has become an essential technique to study surfaces and atmospheres of planetary objects, prior and in addition to in-situ analyses. Remote sensing experiments analyzing the sunlight reflected by planetary surfaces can be used to derive the mineralogical composition and physical properties of the natural surfaces and atmospheres observed. This technique was successfully used on Mars with ISM instrument. As an improvement of ISM, OMEGA onboard MARS-EXPRESS will play a key role in the mineralogical mapping of the Martian surface. We present the reflectance measurements made with OMEGA during on ground calibration sessions on natural slabs of rocks and minerals part of a database which will be used on similar future American instruments (as CRISM onboard MRO). We discuss the implication on the scientific capabilities of OMEGA instrument.

Bonello, G.↗
NASA NTRS1987

Atmospheric correction of NS-001 data and extraction of multiple angle reflectance data sets

The percentage of incident solar flux reflected by a surface is a quantity of considerable interest in remote sensing studies. To calculate reflectance from remotely sensed radiance data some estimate of incident flux is needed. Since simultaneous ground-based radiometric measurements are often not available for observations by aircraft or satellite sensors, a procedure based on modeling atmospheric transmittance and scattering was developed. The primary application is to an aircraft data set collected with the NASA C-130 over the Superior National Forest, Minnesota. Atmospherically corrected multiple angle reflectance data sets and reflectance images are generated for areas of natural forest vegetation. These data and the technique may be useful for studies of the interactions of light with forested canopies.

Strebel, D. E.↗
NASA NTRS1976

Multilayered models for electromagnetic reflection amplitudes

The remote sensing of snowpack characteristics with surface installations or with an airborne system could have important applications in water resource management and flood prediction. To derive some insight into such applications, the electromagnetic response of multilayer snow models is analyzed. Normally incident plane waves are assumed at frequencies ranging from 10 to the 6th power to 10 to the 10th power Hz, and amplitude reflection coefficients are calculated for models having various snow-layer combinations, including ice sheets. Layers are defined by a thickness, permittivity, and conductivity; the electrical parameters are constant or prescribed functions of frequency. To illustrate the effect of various layering combinations, results are given in the form of curves of amplitude reflection coefficients, versus frequency for a variety of models. Under simplifying assumptions, the snow thickness and effective dielectric constant can be estimated from the reflection coefficient variations as a function of frequency.

Linlor, W. I.↗