Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Refinement of the crystal structure of the high-temperature phase G{sub 0} in (NH{sub 4}){sub 2}WO{sub 2}F{sub 4} (powder, X-ray, and neutron scattering)

The (NH{sub 4}){sub 2}WO{sub 2}F{sub 4} compound undergoes a series of phase transitions: G{sub 0} {yields} 201, K {yields} G{sub 1} {yields} 160, and K {yields} G{sub 2}, with a significant change in entropy ({Delta}S{sub 1} {approx} Rln10 at the G{sub 0} {yields} G{sub 1} transition), which indicates significant orientational disordering in the G{sub 0} phase and the order-disorder type of the phase transition. X-ray diffraction is used to identify the crystal structure of the G{sub 0} phase as rhombohedral (sp. gr. Cmcm, Z = 4), determine the lattice parameters and the positions of all atoms (except hydrogen), and show that [WO{sub 2}F{sub 4}]{sup 2-} ions can form a superposition of dynamic and static orientational disorders in the anionic sublattice. A determination of the orientational position of [NH{sub 4}]{sup +} ions calls for the combined method of elastic and inelastic neutron scattering. Inelastic neutron scattering is used to determine the state of hindered rotation for ammonium ions in the G{sub 0} phase. Powder neutron diffraction shows that the orientational disorder of NH{sub 4} ions can adequately be described within the free-rotation approximation.

36 MATERIALS SCIENCE↗

High‐Resolution Numerical Simulation and Analysis of Mach ReflectionStructures in Detonation Waves in Low‐Pressure H 2 –O 2 –Ar Mixtures: A Summary of Results Obtained with the Adaptive Mesh Refinement Framework AMROC

Numerical simulation can be key to the understanding of the multidimensional nature of transient detonation waves. However, the accurate approximation of realistic detonations is demanding as a wide range of scales needs to be resolved. This paper describes a successful solution strategy that utilizes logically rectangular dynamically adaptive meshes. The hydrodynamic transport scheme and the treatment of the nonequilibrium reaction terms are sketched. A ghost fluid approach is integrated into the method to allow for embedded geometrically complex boundaries. Large‐scale parallel simulations of unstable detonation structures of Chapman‐Jouguet detonations in low‐pressure hydrogen‐oxygen‐argon mixtures demonstrate the efficiency of the described techniques in practice. In particular, computations of regular cellular structures in two and three space dimensions and their development under transient conditions, that is, under diffraction and for propagation through bends are presented. Some of the observed patterns are classified by shock polar analysis, and a diagram of the transition boundaries between possible Mach reflection structures is constructed.

Deiterding, Ralf↗

Refinement effect of two rare earth borides in an Al-7Si-4Cu alloy: A comparative study

Highlights: • Refinement performance of Al-La-B and Al-Ce-B refiners in Al-7Si-4Cu alloy was investigated. Due to the orientation relationships between rare earth borides and Al, CeB{sub 6} and LaB{sub 6} can act as the nucleation substrate of α-Al and refine Al-Si-Cu casting alloy effectively. • Al-Ce-B refiner showed better refining efficacy than Al-La-B refiner because of the lower lattice mismatch and less angel difference of the certain orientation relationship between CeB{sub 6} and Al, demonstrated by TEM analysis. • Effects of Al-La-B and Al-Ce-B refiners on alloy defects and tensile properties were investigated. The best refiner addition level in this alloy is considered to be 1.0wt%. Tensile properties of Al-7Si-4Cu alloy were prominently improved owing to the better refined microstructures and much fewer shrinkage defects. - Abstract: In this paper, refinement performance of Al-La-B and Al-Ce-B refiners in Al-7Si-4Cu alloy and their effects on alloy defects and tensile properties were investigated. Due to the orientation relationships between rare earth borides and Al, CeB{sub 6} and LaB{sub 6} can act as the nucleation substrate of α-Al and refine Al-Si-Cu casting alloy effectively. Al-Ce-B refiner showed better refining efficacy than Al-La-B refiner because of the lower lattice mismatch and less angel difference of the certain orientation relationship between CeB{sub 6} and Al, demonstrated by TEM analysis. Tensile properties of Al-7Si-4Cu alloy were prominently improved from 204.4 ± 5.9 MPa to 250.6 ± 6.7 MPa in as-cast state and 335.7 ± 6.5 MPa to 386.0 ± 7.0 MPa in heat treatment state owing to the better refined microstructures and much fewer shrinkage defects. However, when the addition level of the refiners was higher than 1.0 wt%, the amount of gas pores in the alloy significantly increased. Hence, the best refiner addition level in this alloy is considered to be 1.0 wt%.

36 MATERIALS SCIENCE↗

The Novel Charfuel® Coal Refining Process 18 TPD Pilot Plant Project for Co- Producing an Upgraded Coal Product, and Commercially Valuable Co- Products: Area of Interest #3 – Coal Beneficiation Pilot Plant Testing (Final Report)

Operation of Carbon Fuels, LLC’s (“CF”) existing, permitted 18 TPD pilot plant located in Golden, Colorado using two individually ranked (ASTM D 388) coal types (two campaigns), employing the novel Charfuel® coal refining process to produce an upgraded coal product and a number of high-valued organic and inorganic coproducts (for which there presently exists large commercial markets) in order to produce engineering and product data which will then be utilized toward the design of a commercial scale integrated facility (pre-feed document). Carbon Fuels, LLC has developed the Charfuel® Coal Refining Process which refines domestically abundant, raw coal (in the same manner as crude oil is refined) to produce the identical, high value co-products that are refined from crude oil. Thus, gasoline, jet fuel, “green diesel”, fuel oil, and marine fuels, as well as petrochemicals such as benzene, toluene, xylene, and methanol are refined from raw coal using this process. The Charfuel® Coal Refining Process is not a coal conversion process, like pyrolysis, or indirect liquefaction. Nor is it an alternative energy system. Rather it is a coal refining process that has the ability to economically produce products traditionally associated with the refining of crude oil but using only abundant, raw coal as the refinery feed stock. The Charfuel® Coal Refining Process is more economical than crude oil refining and is environmentally benign. Therefore, this value added process yields a return on investment well above 50% for a commercial facility. Furthermore, the Charfuel® process, unlike alternatives such as ethanol and hydrogen, can utilize the existing transportation, delivery, and other petroleum based systems. Hence, there is no need for new engines, pipelines, tankers, or product acceptance. As a result, the profitability of the process is increased. Objectives: (1) Operation of the integrated 18 tpd pilot plant, using two coal types (ranks); (2) Demonstration of process flexibility in being able to produce different products (gas, liquid, and char), as well as determination of operating parameters for identifying scale up criteria for two coal types (ranks); (3) Generation of engineering and design information (process specifications) for use in designing a commercial scale plant (scale-up); (4) Determination of important environmental issues surrounding the process and the products such as fate of trace elements (mercury and other heavy metals) and distributions of SO2, NOx, and CO 2 by analysis of effluent streams; (5) Production of sufficient product to allow reliable commercial economic evaluation of both the refined coal product and the coproducts; and, (6) Assessment of longer-term reliability of unit operations. Period 1: reconfiguration of the 18 TPD plant to meet specific FOA requirements and to qualify the facility for operation; and, Period 2: operation of the 18 TPD plant for two campaigns using two coals types (ranks) which are widely commercially used and abundant - the first being a subbituminous (Powder River Basin (“PRB”)) coal, and the second a bituminous (Illinois #6) coal.

01 COAL, LIGNITE, AND PEAT↗

Mesh refinement for anisotropic diffusion in magnetized plasmas

Highly accurate simulation of plasma transport is needed to drive the successful design and operation of magnetically confined fusion reactors. Unfortunately, the extreme anisotropy present in magnetized plasmas results in thin boundary layers that are expensive to resolve. Here, this work investigates how various mesh refinement strategies might reduce that expense to allow for more efficient simulation by comparing standard variable refinement approaches that use a field quantity to an adaptive approach that uses an error estimator. It is first verified that higher order discretization only realizes the proper rate of convergence once the mesh resolves the thin boundary layer, therefore motivating the focusing of refinement on the boundary layer. For three two-dimensional test cases that contain characteristic features of tokamak magnetic fields, an exponential refinement strategy based on the magnetic flux function, which is the standard refinement approach in the field, is compared to an adaptive strategy utilizing the established Zienwiekicz and Zhu error estimator. The adaptive mesh refinement strategy consistently achieves the same accuracy using orders of magnitude less degrees of freedom than either exponential or uniform refinement. This result makes the adaptive refinement strategy more efficient than the exponential refinement strategy while also being more generalizable to problems with complex magnetic geometries. Scaling laws are derived that quantify the improvement in cost of the adaptive refinement strategy over other refinement approaches in 2D and 3D.

97 MATHEMATICS AND COMPUTING↗

A block-spectral adaptive H-/$p$-refinement strategy for shock-dominated problems

An adaptive H-/p-refinement strategy using a novel sensor is devised and tested in a block-spectral compressible Euler code equipped with adaptive-mesh refinement (AMR) and high-order flux-reconstruction numerics. At each Gauss quadrature point (or solution point) within each spectral block (or mesh element) the discrete velocity jump ΔU = ∂U/∂y 1 Δy 1 + ∂V/∂y 2 Δy 2 + ∂W/∂y 3 Δy 3 is calculated and normalized by the local speed of sound, a. Here, the grid spacing, Δx i , is calculated in each direction as the distance between auxiliary Gauss-Lobatto points, staggered relative to the solution points. The polynomial order is increased from p = 0 to p = p max in regions of weak compression, (ΔU/a) crit < ΔU/a < 0 and kept at p = p max in regions of flow expansion ΔU/a ≥ 0, while staying at the H = 0 base mesh level. Regions experiencing strong compressions, i.e. ΔU/a < (ΔU/a) crit , are H-refined up to H = H max where H max is applied at the location of maximum compression, ΔU/a = min(ΔU/a) in the domain, while keeping p = 0 to guarantee robustness and monotonicity of the solution in the H refined region. The critical value of (ΔU/a) crit = -0.06 is found to effectively separate smooth and non-smooth solution regions, supported by a 1D detonation initiation test case in ideal gas and a shock-to-detonation transition in high explosives. Using this value, the Sod shock tube, Shu-Osher problem, double Mach reflection and a 2D detonation in a high-explosive are simulated with the proposed adaptive H-/p-refinement. In the Sod shock tube case, p-refinement resolves the (weak) contact discontinuity while H-refinement enhances the grid resolution in the shock exploiting the monotonicity of the p = 0 reconstruction. For the Shu-Osher problem, p-refinement captures the small-scale oscillations trailing the shock that would be otherwise attenuated, while H-refinement triggered by the ΔU-sensor appropriately tracks the shock. In the double Mach reflection problem, H-refinement confines the numerical diffusion around the reflected shock while p-refinement recaptures many physical features trailing the shock. Finally, in the 2D high-explosive detonation case, H-refinement follows the leading shock and resolves the curvature of the detonation wave, while p-refinement adds resolution to the trailing reaction zone. Finally, the proposed methodology is tested in a detonation-wave propagation test case in high-explosives with numerical predictions comparing favorably against experiments.

97 MATHEMATICS AND COMPUTING↗

Adaptive Mesh Refinement for Microelectronic Device Design

Finite element and finite volume methods are used in a variety of design simulations when it is necessary to compute fields throughout regions that contain varying materials or geometry. Convergence of the simulation can be assessed by uniformly increasing the mesh density until an observable quantity stabilizes. Depending on the electrical size of the problem, uniform refinement of the mesh may be computationally infeasible due to memory limitations. Similarly, depending on the geometric complexity of the object being modeled, uniform refinement can be inefficient since regions that do not need refinement add to the computational expense. In either case, convergence to the correct (measured) solution is not guaranteed. Adaptive mesh refinement methods attempt to selectively refine the region of the mesh that is estimated to contain proportionally higher solution errors. The refinement may be obtained by decreasing the element size (h-refinement), by increasing the order of the element (p-refinement) or by a combination of the two (h-p refinement). A successful adaptive strategy refines the mesh to produce an accurate solution measured against the correct fields without undue computational expense. This is accomplished by the use of a) reliable a posteriori error estimates, b) hierarchal elements, and c) automatic adaptive mesh generation. Adaptive methods are also useful when problems with multi-scale field variations are encountered. These occur in active electronic devices that have thin doped layers and also when mixed physics is used in the calculation. The mesh needs to be fine at and near the thin layer to capture rapid field or charge variations, but can coarsen away from these layers where field variations smoothen and charge densities are uniform. This poster will present an adaptive mesh refinement package that runs on parallel computers and is applied to specific microelectronic device simulations. Passive sensors that operate in the infrared portion of the spectrum as well as active device simulations that model charge transport and Maxwell's equations will be presented.

Cwik, Tom↗

Formation of Plastic Inclusions in U71Mnk High-Speed Heavy-Rail Steel Refined by CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO Slag

To precisely control the characteristics of nonmetallic inclusions with high plasticity in U71Mnk high-speed heavy-rail steel deoxidized by Si and Mn, the chemical composition of CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO slag in the ladle furnace (LF) refining process was optimized by thermodynamic calculations. Relationships among the refining slag, nonmetallic inclusions, and elemental concentrations in the steels were analyzed to obtain the conditions for determining the optimal composition of refining slag. The optimal compositions and the component activities of CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO refining slag were determined and discussed according to calculations using FactSage 7.0. Finally, ten industrial experiments were performed. Variations in the compositions of LF refining slag, inclusions, and steel, as well as the sizes of the inclusions, and metallographic classification assessment of the U71Mnk steel product, were investigated and discussed to verify the feasibility and effectiveness of the optimized LF refining slag. Kinetics of steel–slag and steel-inclusion reactions during LF refining was studied and compared. The results show that to obtain low [O], [Al], and [S] contents and inclusions with high plasticity in molten steel, the optimal composition of the LF refining slag should be CaO: 44.2 to 51.7 wt pct, SiO{sub 2}: 41.4 to 47.0 wt pct, Al{sub 2}O{sub 3}: 0 to 4.7 wt pct and MgO 5.0 to 7.0 wt pct, where the basicity R is above 1.00 and the C/A ratio is above 9.00. After the LF refining process, the contents of total oxygen (T.O.), [Al], and [S] gradually stabilized in the range of 0.0008 to 0.0012 wt pct, 0.002 to 0.0028 wt pct and 0.0026 to 0.0037 wt pct, respectively. The densities of the three kinds of typical inclusions (CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO, MnS, and CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-MnS) also decreased and reached approximately 0.25/mm{sup 2}, and no inclusion larger than 6.0 μm was found. The composition of the inclusions gradually changed into the optimal range in the CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO slag system during the LF refining process.

36 MATERIALS SCIENCE↗

The grain refinement mechanisms of various phases in shot-peened Nickel-Aluminum bronze (NAB) alloy

Highlights: • There exist two grain refinement mechanisms at the same time in the α phase. • The refinement of β' phase is attributed to the formation of dense and ordered nano twins. • The brittle strip-shape κ{sub iii} phases are fragmented after large deformation. • The κ{sub iv} and κ{sub ii} phases exhibit the twinning and dislocation deformation modes, separately. • The microhardness increases significantly owing to work hardening effect and grain refinement. - Abstract: In this study, coarse-grained Nickel-Aluminum bronze (NAB) alloy is subjected to shot-peening (SP) treatment, and the grain refinement mechanisms of various phases in shot-peened NAB alloy are investigated separately. The results show that severe deformation layers are produced on the surface. Meanwhile, refined grains with the average size below 100 nm are induced through SP treatment indicated by the results of X-ray diffraction (XRD) patterns. Various phases in NAB alloy including α, β' and three intermetallic phases (κ{sub ii}, κ{sub iii} and κ{sub iv}) display different grain refinement mechanisms. The grain refinement in the α phase involves dislocation segmentation in the precipitation-free zone and the twinning intersection in the precipitation zone. The formation of nanotwins by emitting partial dislocations at the grain boundary is found to be responsible for the grain refinement in the β' phase. As for the κ phases, the strip-shaped κ{sub iii} phases are fragmented after severe deformation, and the κ{sub iv} and κ{sub ii} phases exhibit the twinning and dislocation deformation modes, respectively. Also, the microhardness is significantly enhanced after SP treatment, which is mainly attributed to the work hardening effect and grain refinement.

36 MATERIALS SCIENCE↗

Improved ligand geometries in crystallographic refinement using AFITT in PHENIX

Modern crystal structure refinement programs rely on geometry restraints to overcome the challenge of a low data-to-parameter ratio. While the classical Engh and Huber restraints work well for standard amino-acid residues, the chemical complexity of small-molecule ligands presents a particular challenge. Most current approaches either limit ligand restraints to those that can be readily described in the Crystallographic Information File (CIF) format, thus sacrificing chemical flexibility and energetic accuracy, or they employ protocols that substantially lengthen the refinement time, potentially hindering rapid automated refinement workflows. PHENIX – AFITT refinement uses a full molecular-mechanics force field for user-selected small-molecule ligands during refinement, eliminating the potentially difficult problem of finding or generating high-quality geometry restraints. It is fully integrated with a standard refinement protocol and requires practically no additional steps from the user, making it ideal for high-throughput workflows. PHENIX – AFITT refinements also handle multiple ligands in a single model, alternate conformations and covalently bound ligands. Here, the results of combining AFITT and the PHENIX software suite on a data set of 189 protein–ligand PDB structures are presented. Refinements using PHENIX – AFITT significantly reduce ligand conformational energy and lead to improved geometries without detriment to the fit to the experimental data. Finally, for the data presented, PHENIX – AFITT refinements result in more chemically accurate models for small-molecule ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward an understanding of the increase in enzymatic hydrolysis by mechanical refining

Mechanical refining is a low-capital and well-established technology used in pulp and paper industry to improve fiber bonding for product strength. Refining can also be applied in a biorefinery context to overcome the recalcitrance of pretreated biomass by opening up the biomass structure and modifying substrate properties (e.g., morphology, particle size, porosity, crystallinity), which increases enzyme accessibility to substrate and improves carbohydrate conversion. Although several characterization methods have been used to identify the changes in substrate properties, there is no systematic approach to evaluate the extent of fiber cell wall disruption and what physical properties can explain the improvement in enzymatic digestibility when pretreated lignocellulosic biomass is mechanically refined. This is because the fiber cell wall is complex across multiple scales, including the molecular scale, nano- and meso-scale (microfibril), and microscale (tissue level). A combination of advanced characterization tools is used in this study to better understand the effect of mechanical refining on the meso-scale microfibril assembly and the relationship between those meso-scale modifications and enzymatic hydrolysis. Enzymatic conversion of autohydrolysis sugarcane bagasse was improved from 69.6 to 77.2% (11% relative increase) after applying mechanical refining and an increase in enzymatic digestibility is observed with an increase in refining intensity. Based on a combination of advanced characterizations employed in this study, it was found that the refining action caused fiber size reduction, internal delamination, and increase in pores and swellability. A higher level of delamination and higher increase in porosity, analyzed by TEM and DSC, were clearly demonstrated, which explain the faster digestibility rate during the first 72 h of enzymatic hydrolysis for disc-refined samples when compared to the PFI-refined samples. Additionally, an increased inter-fibrillar distance between cellulose microfibrils at the nano-meso-scale was also revealed by SFG analysis, while no evidence was found for a change in crystalline structure by XRD and solid-state NMR analysis.

09 BIOMASS FUELS↗

Improving signal strength in serial crystallography with DIALS geometry refinement

The DIALS diffraction-modeling software package has been applied to serial crystallography data. Diffraction modeling is an exercise in determining the experimental parameters, such as incident beam wavelength, crystal unit cell and orientation, and detector geometry, that are most consistent with the observed positions of Bragg spots. These parameters can be refined by nonlinear least-squares fitting. In previous work, it has been challenging to refine both the positions of the sensors (metrology) on multipanel imaging detectors such as the CSPAD and the orientations of all of the crystals studied. Since the optimal models for metrology and crystal orientation are interdependent, alternate cycles of panel refinement and crystal refinement have been required. To simplify the process, a sparse linear algebra technique for solving the normal equations was implemented, allowing the detector panels to be refined simultaneously against the diffraction from thousands of crystals with excellent computational performance. Separately, it is shown how to refine the metrology of a second CSPAD detector, positioned at a distance of 2.5 m from the crystal, used for recording low-angle reflections. With the ability to jointly refine the detector position against the ensemble of all crystals used for structure determination, it is shown that ensemble refinement greatly reduces the apparent nonisomorphism that is often observed in the unit-cell distributions from still-shot serial crystallography. In addition, it is shown that batching the images by timestamp and re-refining the detector position can realistically model small, time-dependent variations in detector position relative to the sample, and thereby improve the integrated structure-factor intensity signal and heavy-atom anomalous peak heights.

36 MATERIALS SCIENCE↗

Multi-Objective Adaptive Mesh Refinement Using Reinforcement Learning

Finite element methods approximate the solution to a partial differential equation (PDE) on a mesh consisting of many elements. In general, using more, smaller elements results in a lower error in the approximation. However, it is often possible to lower the error substantially by only refining, or decreasing the size of, the few elements in the mesh that have the highest error. Adaptive mesh refinement (AMR) is a process that selectively refines regions of a mesh with high error to achieve a desired accuracy in as few degrees of freedom (DOFs) as possible. AMR is favorable compared to uniform refinement, which refines all elements of the mesh equally, because it can often achieve the same accuracy without wasting extra computation time on refinement of elements that already have low error. However, it is difficult to know which elements to refine. In this report we explore ways to choose which elements to refine such that we minimize both the resulting error and the cumulative DOFs used in computation. In particular, we introduce a Pareto-front learning algorithm that trains a policy to give the optimal refinement actions to minimize the cumulative DOFs used to achieve a given target error. Such a policy is useful because it can be deployed on many different problem types where different accuracy levels are desired. Furthermore, training a single policy for a range of target errors allows us to use transfer learning to reduce the required training time.

97 MATHEMATICS AND COMPUTING↗

An adaptive grid-based all hexahedral meshing algorithm based on 2-refinement.

Most adaptive mesh generation algorithms employ a 3-refinement method. This method, although easy to employ, provides a mesh that is often too coarse in some areas and over refined in other areas. Because this method generates 27 new hexes in place of a single hex, there is little control on mesh density. This paper presents an adaptive all-hexahedral grid-based meshing algorithm that employs a 2-refinement method. 2-refinement is based on dividing the hex to be refined into eight new hexes. This method allows a greater control on mesh density when compared to a 3-refinement procedure. This adaptive all-hexahedral meshing algorithm provides a mesh that is efficient for analysis by providing a high element density in specific locations and a reduced mesh density in other areas. In addition, this tool can be effectively used for inside-out hexahedral grid based schemes, using Cartesian structured grids for the base mesh, which have shown great promise in accommodating automatic all-hexahedral algorithms. This adaptive all-hexahedral grid-based meshing algorithm employs a 2-refinement insertion method. This allows greater control on mesh density when compared to 3-refinement methods. This algorithm uses a two layer transition zone to increase element quality and keeps transitions from lower to higher mesh densities smooth. Templates were introduced to allow both convex and concave refinement.

99 GENERAL AND MISCELLANEOUS↗

A template-based approach for parallel hexahedral two-refinement

Here, we provide a template-based approach for generating locally refined all-hex meshes. We focus specifically on refinement of initially structured grids utilizing a 2-refinement approach where uniformly refined hexes are subdivided into eight child elements. The refinement algorithm consists of identifying marked nodes that are used as the basis for a set of four simple refinement templates. The target application for 2-refinement is a parallel grid-based all-hex meshing tool for high performance computing in a distributed environment. The result is a parallel consistent locally refined mesh requiring minimal communication and where minimum mesh quality is greater than scaled Jacobian 0.3 prior to smoothing.

2-refinement↗

Research on Selective Oxidation of Carbon and Aluminum with Introduction of CO{sub 2} in RH Refining of Low-Carbon Steel Process

The injection of CO{sub 2} during the Rheinstahl–Heraeus (RH) refining process as a lifting gas is a new attempt for the steel industry, and can promote refining effect and realize the utilization of CO{sub 2} as a resource. In the present study, the thermodynamic equilibrium of the RH refining process through CO{sub 2} injection instead of Ar was calculated using FactSage software. A selective oxidation sequence of [C] and [Al] with CO{sub 2} was studied and analyzed under the RH refining temperature and vacuum degree. In addition, the oxidation zones of carbon and aluminum were both defined. Industrial trials were preliminarily conducted to verify the above theory. The results show that CO{sub 2} has the potential to be used to refine low-carbon steel in RH, but its refining effect is affected by the [Al] content in steel. By reducing the additive amount of aluminum alloy in the ladle furnace and replenishing the aluminum during the late stage of the RH refining process, CO{sub 2} injection can achieve a lower temperature drop of molten steel and a better refining effect than Ar during the RH degassing process.

36 MATERIALS SCIENCE↗

Clarifying the formation of equiaxed grains and microstructural refinement in the additive manufacturing of Ti-Cu

Controlling microstructural evolution in metallic additive manufacturing (AM) is difficult, especially in producing refined as-built grains instead of coarse, directional grains. Traditional solutions involve adding inoculants to AM feedstocks, but titanium (Ti) alloys cannot employ this approach without producing detrimental secondary phases. Ti-Cu (Ti-copper) alloys offer a solution through constitutional supercooling and/or solid state thermal cycling under AM conditions. This work analyzes a compositionally graded directed energy deposition (DED) Ti-Cu build, single-melt laser tracks, and dilatometric heat treatments to evaluate if, when, and by what mechanism(s) microstructural refinement occurs. Refinement by inoculation of unmelted powder particles was also considered. Constitutional supercooling produced no net microstructural refinement as any equiaxed dendrites which form are remelted with new deposition. This finding agreed with solidification modeling of powder bed fusion-laser beam (PBF-LB) and DED builds. Solid state thermal cycling refined microstructures only during ex-situ dilatometric heat treatments, suggesting build parameter optimization is needed to achieve refinement in-situ. Accidental heterogeneous nucleation on unmelted Ti powder, originating from the different thermophysical properties of Ti and Cu, provided the most significant microstructural refinement. This work systematically assesses the microstructural refinement mechanisms of Ti-Cu in AM builds and offers insights into microstructural control in eutectoid alloys.

36 MATERIALS SCIENCE↗