Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radionuclide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Radionuclide surrogate aerosolization, resuspension and suppression in hazardous situations

Radioactive fire following nuclear accidents causes resuspension of radioactive contamination that can spread over large areas. Although many papers focus on particle deposition and resuspension, a limited number of studies model its suppression. Even less data is available for the comparison of emissions across particle size, surface, and mode of resuspension. In this study, cerium dioxide surrogate for internal hazards such as radionuclide particle matter was aerosolized into a large chamber and subsequently resuspended after sedimentation. Resuspension was induced by common modes of human movement including walking, wind, and driving on common surfaces including polyvinyl chloride (PVC), artificial grass (turf), and concrete in a 5.8 m long, 3.7 m wide and 3 m high tent. The resuspension was experimentally measured for two particle sizes (1 and 10 μm) at three different heights (0.3 m, 1.2 m, and 2.4 m) and compared across size, surface, and mode of resuspension. Particle size distribution was measured using an aerodynamic particle sizer and the resuspended particles were collected with the wetted wall cyclone aerosol collector and quantitated using inductively coupled plasma mass spectrometry. The testing was repeated with the F-500 fire retardant application to study its effect on resuspension. In this study, artificial grass flooring was found to generate the most resuspension, with walking on turf for the 1 μm particle testing yielding the highest factor overall. Concrete had the lowest resuspension, showing variations in the size distribution of aerosol as a function of height from the source resuspension factors. The application of fire retardant was found to significantly reduce surrogate resuspension, regardless of resuspension method or testing surface. Here, the results provide impactful information regarding the different modes of resuspension including human transport (walking and driving) and wind for the resuspension of radionuclide surrogate particles deposited onto common surfaces and the effect of fire retardant application on their resuspension, leading to higher levels of safety for nuclear energy plants and facilities.

42 ENGINEERING↗
DOE OSTI2022

Best practices for predictions of radionuclide activity concentrations and total absorbed dose rates to freshwater organisms exposed to uranium mining/milling

Predictions of radionuclide dose rates to freshwater organisms can be used to evaluate the radiological environmental impacts of releases from uranium mining and milling projects. These predictions help inform decisions on the implementation of mitigation measures. The objective of this study was to identify how dose rate modelling could be improved to reduce uncertainty in predictions to non-human biota. For this purpose, we modelled the activity concentrations of 210 Pb, 210 Po, 226 Ra, 230 Th, and 238 U downstream of uranium mines and mills in northern Saskatchewan, Canada, together with associated weighted absorbed dose rates for a freshwater food chain using measured activity concentrations in water and sediments. Differences in predictions of radionuclide activity concentrations occurred mainly from the different default partition coefficient and concentration ratio values from one model to another and including all or only some 238 U decay daughters in the dose rate assessments. Consequently, we recommend a standardized best-practice approach to calculate weighted absorbed dose rates to freshwater biota whether a facility is at the planning, operating or decommissioned stage. At the initial planning stage, the best-practice approach recommend using conservative site-specific baseline activity concentrations in water, sediments and organisms and predict conservative incremental activity concentrations in these media by selecting concentration ratios based on species similarity and similar water quality conditions to reduce the uncertainty in dose rate calculations. At the operating and decommissioned stages, the best-practice approach recommends relying on measured activity concentrations in water, sediment, fish tissue and wholebody of small organisms to further reduce uncertainty in dose rate estimates. This approach would allow for more realistic but still conservative dose assessments when evaluating impacts from uranium mining projects and making decision on adequate controls of releases.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2024

Coupled hydro-thermal flow and radionuclide transport driven by spatial variation of heat-generating radioactive wastes in shale formations

Deep geologic disposal of multiple nuclear waste packages with various heat sources can induce nonuniform hydro-thermal behaviors in the near-field of the repository, consequently influencing the long-term radionuclide transport in the far-field once waste form breach initiates. Here, this study looks into three cases with variation in the spatial order of six groups of heat sources (10th, 50th, 75th, 90th, 95th, and 99th percentiles of heat outputs generated from 1,981 as-loaded dual-purpose canisters in the field site) in a shale-hosted repository with respect to the uni-directional groundwater flow (from west to east): (1) cooler waste packages from west to east, (2) hotter waste packages from west to east, and (3) hottest waste packages in the middle of the repository. Our field-scale PFLOTRAN simulation represents heat-driven multiphysics coupled mechanisms, including multiphase flow, heat transfer, and chemical/radioactive transport, and also, calculates the onset of waste form breach based on temperature-dependent canister vitality. The results from this sensitivity study will quantify the short- (less than 1 × 10 3 years) and long-term (up to 1 × 10 6 years) impacts of sporadic heat pulses from waste package on the spatio-temporal perturbation in hydro-thermal flow quantities and the rate of radionuclide transport in both near- and far-field of the repository system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Distribution of Natural Radionuclides at the Nevada National Security Site

According to the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) publications, contributions of terrestrial gamma doses are mainly from the presence of 40 K, and of 238 U and 232 Th together with their progeny in various rocks and soils. A survey of soil distributions of radionuclides 40 K, 238 U, and 232 Th was performed at the Nevada National Security Site (NNSS) using in situ gamma-ray spectrometry with a high-purity germanium (HPGe) detector. The average activity concentrations of 40 K, 238 U, and 232 Th in natural soils at the NNSS are 867 Bq kg -1 (range from 150 ± 8 to 1297 ± 56 Bq kg -1 ), 50 Bq kg -1 (range from 29 ± 3 to 74 ± 8 Bq kg -1 ), and 56 Bq kg -1 (range from 11 ± 2 to 96 ± 10 Bq kg -1 ), respectively. The concentration at each location is significantly associated with its geological lithology. The terrestrial gamma dose rates around the NNSS were estimated from 26 to 144 nSv h -1 with mean value of 93 nSv h -1 . In conclusion, our results provide useful information about the natural background radiation and radiological effects of naturally occurring radionuclides at the NNSS.

environmental assessment↗
DOE OSTI2023

Detection and Mitigation of Radionuclides in the Environment: Toward a Clean Ecosystem

This research describes a straightforward approach to producing surface-engineered nanomaterials for the detection and mitigation of radionuclides generated in nuclear facilities. Here, a micelle forming surfactant ligand, namely cetyltrimethylammonium bromide (CTAB), was engineered on the surface of iron oxide nanoparticles and explored for the removal of radioactive materials, such as pertechnetate (TcO 4 – ), from aqueous environments. A series of analytical tools were employed to characterize the nanocomposite materials, such as SEM, EDS, UV-Vis spectroscopy, DLS, and PALS, and evaluated for their ability to capture a model analyte, perrhenate (ReO 4 – ) ions. The iron oxide magnetic nanoparticles retain their magnetic properties after surface functionalization and can be easily manipulated and collected with a magnet. Therefore, these nanocomposite materials can be used to remotely remediate environments by scavenging and collecting radionuclide species at the desired location.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2025

Development and testing of a continuous maritime monitor for radionuclide aerosols

Monitoring airborne concentrations of radionuclide activity may provide a timely warning to sea-based assets to avoid contamination from a radioactive plume. The development and testing of an automated aerosol monitoring system that can capture and detect radioactive particulate from marine air is presented. A custom electrostatic precipitator (ESP) was designed to capture particulate onto a reusable collection media. The collection efficiency of the ESP system for radon progeny was determined to be ~23%. A conservative calculation of the minimum detectable concentration of 214 Bi was estimated as 0.3-8 Bq/m 3 . The system was demonstrated in continuous operation, without consumables and limited maintenance, in a marine environment at the PNNL campus in Sequim, Washington. In conclusion, a successful 2-month deployment indicates the feasibility of the approach for continuous maritime monitoring for radionuclide aerosols.

Moore, Michael E. [Pacific Northwest National Labo↗
DOE OSTI2025

From Structure to Function: Zn/Mn-Modified Maghemite as an Advanced Nanoplatform for Magnetic Hyperthermia and Radionuclide Therapy

The development of nanoplatforms capable of efficient heat generation and stable radionuclide delivery is essential for effective bimodal cancer therapy. Here, in this study, binary (Fe–M) and ternary (Fe–M–M′) metal oxide nanoparticles were synthesized via a polyol method optimized to produce flower-like γ-Fe 2 O 3 (maghemite) structures, with M and M′ representing Zn and/or Mn. Comprehensive structural and magnetic characterization was conducted to explain the relationship between composition, defect structure, and hyperthermic performance. The analyses revealed that cation substitution induced an Fe-site vacancy, primarily at octahedral positions, leading to local structural distortions, as confirmed by powder X-ray diffraction and pair distribution function analysis. The optimized composition, with Zn/Mn/Fe = 0.040:0.182:1, exhibited the highest concentration of vacancies and structural disorder. These vacancies altered the bonding environment, enhancing magnetic interactions at tetrahedral sites while weakening those at the octahedral positions. The resulting multicore nanoflowers (20–63 nm; core size 13–18 nm) displayed strong heating performance, with intrinsic loss power ranging from 0.34 to 5.77 nHm 2 kg –1 . The optimized sample achieved a temperature increase of 30 °C within 2 min and a specific absorption rate of 369 W g –1 . This composition was further coated with citrate (CA) and successfully radiolabeled with 177 Lu, achieving a radiolabeling yield of 92.7% and excellent stability, thus forming a robust nanoplatform for combined magnetic hyperthermia and radionuclide therapy. Biological evaluation of the optimized S5 composition revealed selective cytotoxicity toward HeLa and LS174 cells, while toxicity was significantly lower to A549, A375, and normal MRC-5 cells. Citrate coating of S5 nanoparticles (S5@CA) drastically reduced their cytotoxicity across all tested cell lines (IC 50 > 200 μg mL –1 ), confirming their enhanced biocompatibility for therapeutic applications. In HeLa cells subjected to magnetic hyperthermia, the viability decreased to approximately 84% after 30 min and 61% after 60 min of treatment, demonstrating the sustained hyperthermic effect at a controlled working temperature of 48 °C. These results underscore the effectiveness of cation substitution and vacancy engineering in tailoring the functional properties of maghemite-based nanomaterials for advanced multimodal cancer therapies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Modification in Applying Appendix D of 40 CFR Part 61 to Heated Solid Radionuclide Materials With High Melting and Boiling Points

Appendix D of Title 40 Part 61 of the US Code of Federal Regulations (CFR) provides a procedure that US Department of Energy (US DOE) facility owners and operators can use to estimate radionuclide emissions to the atmosphere for dose calculations instead of measuring emissions for minor sources under the 40 CFR Part 61, Subpart H, National Emission Standards for Emissions of Radionuclides Other Than Radon From Department of Energy Facilities, regulation. The procedure assumes that any radioactive material heated above 100 °C is completely vaporized and emitted to the atmosphere. In 1991, the US DOE Oak Ridge Reservation (ORR) requested approval to use different release fractions (RFs) for uranium because of its high melting and boiling points. In response to the request, the US Environmental Protection Agency (US EPA) Region IV approved the use of modified RFs for elemental uranium provided no reaction had taken place to alter its chemical form. In 2015, the ORR requested approval to use different RFs for tungsten, again because of its high melting and boiling points. EPA Region IV approved the use of modified RFs for heated radioactive tungsten metal. In accordance with the two precedents set for heating uranium and radioactive tungsten metals, in 2016, the ORR requested approval to use modified RFs in a similar fashion for other radioactive solid metals and compounds with melting and boiling points above 500 °C that might be heated above 100 °C in future research projects and experiments. EPA Region IV again granted approval to use modified RFs for the list of compounds. This note discusses the proposed modified RFs and their development.

36 MATERIALS SCIENCE↗
DOE OSTI2024

RAIS ICRP 107 Dose Conversion Factors for Radionuclides

Radionuclide dose conversion factors, also known as dose coefficients, are used for radionuclide dose calculations. Routes included are oral, inhalation, and external exposure. Separate datasets are maintained for ICRP 107, 60, and 30. The dose conversion factors from the ICRP 107 (https://rais.ornl.gov/cgibin/tools/TOX_search?select=rad107) are updated values from FGR 13 supplement using ICRP 107 decay data. The derivation and values are in “Calculations of Slope Factors and Dose Coefficients” (ORNL, 2014).

Noto, Katie [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2024

RAIS ICRP 30 Dose Conversion Factors for Radionuclides

Radionuclide dose conversion factors, also known as dose coefficients, are used for radionuclide dose calculations. Routes included are oral, inhalation, and external exposure. Separate datasets are maintained for ICRP 107, 60, and 30. The dose conversion factors from ICRP 30 (https://rais.ornl.gov/cgibin/tools/TOX_search?select=rad30) can be found in FGR 11. Results from all three tools can be downloaded in .xlsx format.

Noto, Katie [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2024

RAIS ICRP 60 Dose Conversion Factors for Radionuclides

Radionuclide dose conversion factors, also known as dose coefficients, are used for radionuclide dose calculations. Routes included are oral, inhalation, and external exposure. Separate datasets are maintained for ICRP 107, 60, and 30. The dose conversion factors from ICRP 60 (https://rais.ornl.gov/cgi-bin/tools/TOX_search?select=rad60) can be found in FGR 12. Results from all three tools can be downloaded in .xlsx format.

Noto, Katie [Oak Ridge National Laboratory (ORNL),↗
DOE OSTI2024

Ecological Benchmark for Radionuclides

The Ecological Benchmark Tool for radionuclides dataset serves as a comprehensive repository of benchmarks designed to assess ecological risks at contaminated sites. This tool facilitates the evaluation of various environmental media and contaminants, supporting regulatory compliance and ecological protection. Benchmarks are available for sediment, soil, and surface water. The dataset also provides species-specific benchmarks for fish, plants, birds, mammals, and invertebrates. Users can select benchmark sources, media, individual radionuclides, and retrieve results in tabular or spreadsheet formats for analysis. Benchmarks are derived from authoritative sources, including government agencies, scientific councils, and academic publications. The dataset supports ecological risk assessments, regulatory decision-making, and environmental planning, with tools for benchmarking against radiological thresholds, sensitive species protection, and habitat impact evaluations. This structured approach ensures a robust evaluation of ecological risks tailored to site-specific and regulatory needs.

Stewart, Debra [Oak Ridge National Laboratory (ORN↗
DOE OSTI2024

Thermochemical Modeling of Radionuclide Vapor-Liquid Equilibria in Sodium Pools for SFR Mechanistic Source Term Analysis

Mechanistic source term (MST) analysis of sodium fast reactors (SFR) requires understanding of various radionuclide (RN) transport phenomena influencing potential releases from the fuel to the environment. One such phenomenon includes the retention or release of RNs from the sodium coolant pool, representing the step after possible fuel failures and influencing transport to the cover gas region. Thermodynamic vapor-liquid equilibria (VLE) calculations were performed on systems representing SFR sodium pools containing oxygen impurities and radionuclide (RN) inventories. First, an assessment and recreation of a previously developed thermodynamic database was completed, including updates to thermodynamic parameters. The RN inventories used in VLE calculations represented hypothetical source terms that might be released to the pool during previously analyzed fuel failure scenarios. The calculations were performed for all possible combinations of sodium pool size (i.e., total oxygen) and number of failed fuel pins (i.e., total RNs). In this way, multiple ratios of the RN relative to the oxygen impurity (RN:O) were compared for their impact on RN volatility, which is discussed in terms of the vapor fraction (VF), defined as the fraction of the RN that is calculated to exist in the vapor phase at equilibrium above condensed phases of that element. Similar trends in VLE behavior are seen in the equilibrium calculation results for elements of similar chemistry, and for some element types, it was found that the RN:O ratio can be important due to oxide formation, which typically exist in the condensed phase.

Shahbazi, Shayan↗
DOE OSTI2022

Cross sections and calculated yields of some radionuclides of yttrium, strontium and rubidium formed in proton-induced reactions on enriched strontium-86: possibility of production of 85g Sr, 83 Rb and 82m Rb in no-carrier-added form

Here, cross sections of the 86 Sr(p,3n) 84m Y, 86 Sr(p,αn) 82m Rb, and 86 Sr(p,x) 85g Sr reactions were measured from their respective thresholds up to 16.2 MeV and from 23.0 to 44.1 MeV at FZJ, and from 14.3 to 24.5 MeV at LBNL, using 96.4% enriched 86 SrCO 3 as target material. Thin targets prepared by sedimentation were irradiated with protons in a stacked-form, and the induced radioactivity was measured by high-resolution γ-ray spectrometry. Nuclear model calculations based on the code TALYS reproduced our experimental cross section data well. From the excitation functions, the integral yields of the above three radionuclides were calculated. The yield of 85g Sr via the natSr(n,γ) process was also measured using the TRIGA Mark-II reactor at AERE, Savar. A comparison of the reactor and cyclotron production of carrier-added 85g Sr is given. The production possibilities of the three investigated radionuclides in no-carrier-added forms at a 30 MeV cyclotron via new routes are discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

A Murine Model of Radionuclide Lung Contamination for the Evaluation of Americium Decorporation Treatments

The hydroxypyridinone ligand 3,4,3-LI(1,2-HOPO) (HOPO), has been previously characterized as a promising chelating agent for in vivo decorporation of actinides, with decorporation being the removal of internally deposited contaminants from the body after exposure. The large majority of relevant literature reports have detailed the efficacy profile of HOPO as a decorporation agent in rodent models, where controlled radionuclide contamination is conducted via intravenous injection. However, this method of contamination does not necessarily reflect an accurate predictive model of the most probable biodistribution of free metal in the body. In the event of a radiological dispersal device or nuclear power plant accident scenario, it is most likely that first responders, military personnel, and victims of the event will be contaminated via air and water transmission. Therefore, research into the efficacy of chelating agents to treat lung-contaminated in vivo models needs to be carried out. Here, we establish a murine model with controlled, reproducible lung contamination using two different radionuclides, 89Zr and 241Am, for orthogonal biodistribution validation by positron emission tomography and ex vivo radioanalysis, respectively. In addition, we report effective chelation treatment of 241Am-contaminated lungs using HOPO, which improves decorporation by up to 40% compared to Ca-DTPA, the current standard of care.

Arino, Trevor↗
DOE OSTI2022

Hanford Site Composite Analysis: Radionuclide Selection for Groundwater Pathway Evaluation

The updated Hanford Site Composite Analysis (CA) (DOE/RL-2019-52, Composite Analysis for Low-Level Waste Disposal in the Hanford Site Central Plateau (FY 2020)) provides an all-pathways dose projection to a hypothetical future member of the public from all planned low-level radioactive waste disposal facilities and potential contributions from all other projected end-state sources of radioactive material left at the Hanford Site following site closure. Its primary purpose is to support the decision-making process of the U.S. Department of Energy (DOE) under DOE O 435.1-1, Radioactive Waste Management, related to managing low-level waste disposal facilities at the Hanford Site. A key aspect of conducting a CA is selecting the radionuclides to be analyzed. This document describes the selection process for radionuclides to be included in the quantitative analysis.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Composite Analysis Vadose Zone Transport of Selected Radionuclides Released from DOE O 435.1 Sources.

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The parallel exascale version of the Subsurface Transport Over Multiple Phases (eSTOMP1) simulator is used to simulate flow and transport for the CA VZ models. The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Composite Analysis Vadose Zone Transport of Selected Hanford Site Composite Analysis: Vadose Zone Transport of Selected Radionuclides Released from DOE O 435.1 Waste Sites

The main objectives of the composite analysis (CA) compliance case vadose zone (VZ) facet are to simulate transport of radionuclide releases from the surface to the water table, and to provide radionuclide transfer rates to groundwater for inclusion into the Plateau-to-River (P2R) saturated zone (SZ) model (CP-57037, Model Package Report: Plateau to River Groundwater Model, Version 8.3). The parallel exascale version of the Subsurface Transport Over Multiple Phases (eSTOMP) simulator is used to simulate flow and transport for the CA VZ models. The CA compliance case approach to address the scale and distribution of contaminant sources in the VZ facet is to subdivide the Hanford Site Central Plateau into 26 models that contain contaminant sources and liquid discharges likely to commingle during migration through the VZ to the water table.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗