Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prediction correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Predicting crack growth direction in unidirectional composites

The purpose of this study is to gain a better understanding of the parameters affecting crack growth direction in unidirectional composite materials. To achieve this, the effect of anisotropy and biaxial, far field, loading on the direction of crack growth in unidirectional off-axis composite materials is investigated. Specific emphasis is placed on defining the crack-tip-stress field and finding a consistent criterion for predicting the direction of crack growth. An anisotropic crack-tip-stress analysis was implemented using three criteria (the normal stress ratio theory, the tensor polynomial failure criterion, and the strain energy density theory) to predict the direction of crack extension in unidirectional off-axis graphite-epoxy. The theoretically predicted crack extension directions were then compared with experimental results. It was determined that only the normal stress-ratio criterion correctly predicts the direction of crack extension.

Gregory, M. A.↗

Computation of leading-edge vortex flows

The simulation of the leading edge vortex flow about a series of conical delta wings through solution of the Navier-Stokes and Euler equations is studied. The occurrence, the validity, and the usefulness of separated flow solutions to the Euler equations of particular interest. Central and upwind difference solutions to the governing equations are compared for a series of cross sectional shapes, including both rounded and sharp tip geometries. For the rounded leading edge and the flight condition considered, viscous solutions obtained with either central or upwind difference methods predict the classic structure of vortical flow over a highly swept delta wing. Predicted features include the primary vortex due to leading edge separation and the secondary vortex due to crossflow separation. Central difference solutions to the Euler equations show a marked sensitivity to grid refinement. On a coarse grid, the flow separates due to numerical error and a primary vortex which resembles that of the viscous solution is predicted. In contrast, the upwind difference solutions to the Euler equations predict attached flow even for first-order solutions on coarse grids. On a sufficiently fine grid, both methods agree closely and correctly predict a shock-curvature-induced inviscid separation near the leeward plane of symmetry. Upwind difference solutions to the Navier-Stokes and Euler equations are presented for two sharp leading edge geometries. The viscous solutions are quite similar to the rounded leading edge results with vortices of similar shape and size. The upwind Euler solutions predict attached flow with no separation for both geometries. However, with sufficient grid refinement near the tip or through the use of more accurate spatial differencing, leading edge separation results. Once the leading edge separation is established, the upwind solution agrees with recently published central difference solutions to the Euler equations.

Newsome, R. W.↗

Modeling and Analysis of Structural Dynamics for a One-Tenth Scale Model NGST Sunshield

New modeling and analysis techniques have been developed for predicting the dynamic behavior of the Next Generation Space Telescope (NGST) sunshield. The sunshield consists of multiple layers of pretensioned, thin-film membranes supported by deployable booms. Modeling the structural dynamic behavior of the sunshield is a challenging aspect of the problem due to the effects of membrane wrinkling. A finite element model of the sunshield was developed using an approximate engineering approach, the cable network method, to account for membrane wrinkling effects. Ground testing of a one-tenth scale model of the NGST sunshield were carried out to provide data for validating the analytical model. A series of analyses were performed to predict the behavior of the sunshield under the ground test conditions. Modal analyses were performed to predict the frequencies and mode shapes of the test article and transient response analyses were completed to simulate impulse excitation tests. Comparison was made between analytical predictions and test measurements for the dynamic behavior of the sunshield. In general, the results show good agreement with the analytical model correctly predicting the approximate frequency and mode shapes for the significant structural modes.

Johnston, John↗

Prediction of the space adaptation syndrome

The univariate and multivariate relationships of provocative measures used to produce motion sickness symptoms were described. Normative subjects were used to develop and cross-validate sets of linear equations that optimally predict motion sickness in parabolic flights. The possibility of reducing the number of measurements required for prediction was assessed. After describing the variables verbally and statistically for 159 subjects, a factor analysis of 27 variables was completed to improve understanding of the relationships between variables and to reduce the number of measures for prediction purposes. The results of this analysis show that none of variables are significantly related to the responses to parabolic flights. A set of variables was selected to predict responses to KC-135 flights. A series of discriminant analyses were completed. Results indicate that low, moderate, or severe susceptibility could be correctly predicted 64 percent and 53 percent of the time on original and cross-validation samples, respectively. Both the factor analysis and the discriminant analysis provided no basis for reducing the number of tests.

Reschke, M. F.↗

Multiclass Flight Anomaly Detection Using Sensor Fusion Based on Dempster-Shafer Theory

As aviation systems in commercial operations continue to grow in complexity, the anomalies exhibited by these systems become more elaborate and difficult to detect. To address the challenge of detecting these complex anomalies, deep learning models have been used extensively in aviation anomaly detection studies, at the expense of end-user interpretability. Aiming to maintain the same level of interpretability as traditional threshold-exceedance methods, we continue our development of prediction models using ordinal patterns and their distributions throughout the flight. Specifically, this study extends our work into multiclass anomaly detection using sensor fusion based on Dempster-Shafer theory (DST), a second-order probability theory used to combine information from different sources of evidence. Our approach uses DST to reduce the uncertainty in the class predictions of an ensemble of classifiers. These classifiers rely on the similarity between flight data and class templates to make a prediction of the state of the aircraft. Our approach aims to take advantage of simple models trained on interpretable features (ordinal patterns) to correctly predict an anomaly and identify the flight dynamics linked to the anomaly. Our results show an improvement when using DST-based sensor fusion over simple majority voting. Additionally, our results provide insight into aircraft states linked to rare high-risk anomalies.

Risk detection↗

Multiclass Flight Anomaly Detection Using Sensor Fusion Based on Dempster-Shafer Theory

As aviation systems in commercial operations continue to grow in complexity, the anomalies exhibited by these systems become more elaborate and difficult to detect. To address the challenge of detecting these complex anomalies, deep learning models have been used extensively in aviation anomaly detection studies, at the expense of end-user interpretability. Aiming to maintain the same level of interpretability as traditional threshold-exceedance methods, we continue our development of prediction models using ordinal patterns and their distributions throughout the flight. Specifically, this study extends our work into multiclass anomaly detection using sensor fusion based on Dempster-Shafer theory (DST), a second-order probability theory used to combine information from different sources of evidence. Our approach uses DST toreduce the uncertainty in the class predictions of an ensemble of classifiers. These classifiers rely on the similarity between flight data and class templates to make a prediction of the state of the aircraft. Our approach aims to take advantage of simple models trained on interpretable features (ordinal patterns) to correctly predict an anomaly and identify the flight dynamics linked to the anomaly. Our results show an improvement when using DST-based sensor fusion over simple majority voting. Additionally, our results provide insight into aircraft states linked to rare high-risk anomalies.

Risk detection↗

Electrophoretic mobility of cells in a vertical Ficoll gradiant

The upward migration of living cells and test particles under the influence of a constant electric field in a low conductivity Ficoll gradient occurs at nearly constant velocity. Viscosity and neutral polymer concentration affect migration rate. Decreasing viscosity speeds up the particle migration, decreasing neutral polymer (Ficoll) concentration, slows particle migration, since electrophoretic mobility increases approximately linearly with neutral polymer concentration. Neutral polymers interact with the cell surface to effectively raise its zeta potential. An analytic function was developed from the known dependence of these physical variables on migration distance; the analysis expresses migration velocity as an explicit function of position in the density gradient. It predicts an almost linear increase in velocity of about 12 to 16% over the working region of the gradient. It was numerically integrated and correctly predicts cell migration distance vs time curves without the use of any fitted parameters. The resulting migration curves follow the expected slowly varying exponential form that closely resembles a straight line. The ability to determine standard electrophoretic mobilities from such curves depends on knowledge of the effect of Ficoll on the zeta potential of the cell type that is separated.

Plank, L. D.↗

Micromolecular modeling

A reaction kinetics based model of the photodegradation process, which measures all important rate constants, and a computerized model capable of predicting the photodegradation rate and failure modes of a 30 year period, were developed. It is shown that the computerized photodegradation model for polyethylene correctly predicts failure of ELVAX 15 and cross linked ELVAX 150 on outdoor exposure. It is indicated that cross linking ethylene vinyl acetate (EVA) does not significantly change its degradation rate. It is shown that the effect of the stabilizer package is approximately equivalent on both polymers. The computerized model indicates that peroxide decomposers and UV absorbers are the most effective stabilizers. It is found that a combination of UV absorbers and a hindered amine light stabilizer (HALS) is the most effective stabilizer system.

Guillet, J. E.↗

Unsteady blade pressures on a propfan: Predicted and measured compressibility effects

The effect of compressibility on unsteady blade pressures is studied by solving the three-dimensional Euler equations. The operation of the eight-bladed SR7L propfan at a 4.75 deg angle of attack was considered. Euler solutions were obtained for three Mach numbers, 0.6, 0.7 and 0.8, and the predicted blade pressure waveforms were compared with flight data. The comparisons show that in general, the effect of Mach number on pressure waveforms are correctly predicted. The change in pressure waveforms are minimal when the Mach number is increased from 0.6 to 0.7. Increasing the Mach number from 0.7 to 0.8 produces significant changes in predicted pressure levels. The predicted amplitudes, however, differ from measurements at some transducer locations. At all the three Mach numbers, the measured (installed propfan) pressure waveforms show a relative phase lag compared to the computed (propfan along) waveforms due to installation effects. Measured waveforms in the blade tip region show nonlinear variations which are not captured by the present numerical procedure.

Nallasamy, M.↗

Probabilistic inference in very large universes

Our current favored cosmological theories allow for the striking and controversial possibility that the observable universe is just a small part of a much larger universe in which parameters that describe the effective, low-energy laws of physics vary from one region to another. The controversy is largely driven by the fact that such a “very large universe” is mostly observationally inaccessible to us, so the issue arises of how we can reasonably assess a theory that describes such a universe. In this paper, we propose a Bayesian method for theory assessment based on theory-generated probability distributions for our observations. We focus on the principles that define this method, leaving aside concerns about how, in practice, one would carry out the required calculations. (One important issue that we set aside is the measure problem.) We argue that cosmological theories can be tested by the standard method of Bayesian updating, but we need to use theoretical predictions for “first-person” probabilities—that is, probabilities that we should use for our observations, taking into account all relevant selection effects. These selection effects can vary from one observer to another and can vary with time, so, in principle, first-person probabilities are defined for each observer instant—an observer at a specific instant of time. Calculations of first-person probabilities should take into account everything that the observer believes about herself and her surroundings, which we refer to as her subjective state. If the universe is very large, a theory might predict that there are many observer instants in the same subjective state; we argue that first-person probabilities should be calculated using a principle of self-locating indifference (PSLI), the assumption that any real observer should make predictions for her future as if she were chosen randomly and uniformly from the theoretically predicted observer instants that share her subjective state. We believe the PSLI is intuitively very reasonable, but we also argue that, if the theory is correct, the use of this principle maximizes the expected fraction of observers who will make correct predictions. A further complication is that cosmological theories are not expected to fully predict the detailed properties of the universe, but rather will predict a set of possible universes, each with a probability. Different possible universes will generically have different numbers of observers. We argue that, in the calculation of first-person probabilities, the probability for each possible universe should be weighted by the number of observer instants in the specified subjective state that it contains. These issues have been controversial in the literature, so we also provide a rebuttal to the claim that principles like the PSLI involve a “selection fallacy”; a rebuttal to what we dub the principle of required certainty; an argument rejecting theories that predict a preponderance of Boltzmann brains; a rebuttal to a parable about humans and Jovians used by Hartle and Srednicki to argue that assumptions of typicality can lead to absurd consequences; and, finally, a discussion about how the use of “old evidence” can be fit into a Bayesian mold.

Azhar, Feraz [University of Notre Dame, IN (United↗

BASS Code Development

The BASS computational aeroacoustic code solves the fully nonlinear Euler equations in the time domain in two-dimensions. The acoustic response of the stator is determined simultaneously for the first three harmonics of the convected vortical gust of the rotor. The spatial mode generation, propagation and decay characteristics are predicted by assuming the acoustic field away from the stator can be represented as a uniform flow with small harmonic perturbations superimposed. The computed field is then decomposed using a joint temporal-spatial transform to determine the wave amplitudes as a function of rotor harmonic and spatial mode order. This report details the following technical aspects of the computations and analysis. 1) the BASS computational technique; 2) the application of periodic time shifted boundary conditions; 3) the linear theory aspects unique to rotor-stator interactions; and 4) the joint spatial-temporal transform. The computational results presented herein are twofold. In each case, the acoustic response of the stator is determined simultaneously for the first three harmonics of the convected vortical gust of the rotor. The fan under consideration here like modern fans is cut-off at +, and propagating acoustic waves are only expected at 2BPF and 3BPF. In the first case, the computations showed excellent agreement with linear theory predictions. The frequency and spatial mode order of acoustic field was computed and found consistent with linear theory. Further, the propagation of the generated modes was also correctly predicted. The upstream going waves propagated from the domain without reflection from the in ow boundary. However, reflections from the out ow boundary were noticed. The amplitude of the reflected wave was approximately 5% of the incident wave. The second set of computations were used to determine the influence of steady loading on the generated noise. Toward this end, the acoustic response was determined with three steady loading conditions: design, low-loading, high-loading. The overall trend showed significant (approximately 10 dB) increases in the generated noise for the highly loaded stator.

Sawyer, Scott↗

WRF Simulations of the 20-22 January 2007 Snow Events over Eastern Canada: Comparison with In-Situ and Satellite Observations

One of the grand challenges of the Global Precipitation Measurement (GPM) mission is to improve cold season precipitation measurements in middle and high latitudes through the use of high-frequency passive microwave radiometry. For this, the Weather Research and Forecasting (WRF) model with the Goddard microphysics scheme is coupled with a satellite data simulation unit (WRF-SDSU) that has been developed to facilitate over-land snowfall retrieval algorithms by providing a virtual cloud library and microwave brightness temperature (Tb) measurements consistent with the GPM Microwave Imager (GMI). This study tested the Goddard cloud microphysics scheme in WRF for two snowstorm events, a lake effect and a synoptic event, that occurred between 20 and 22 January 2007 over the Canadian CloudSAT/CALIPSO Validation Project (C3VP) site in Ontario, Canada. The 24h-accumulated snowfall predicted by the WRF model with the Goddard microphysics was comparable to the observed accumulated snowfall by the ground-based radar for both events. The model correctly predicted the onset and ending of both snow events at the CARE site. WRF simulations capture the basic cloud properties as seen by the ground-based radar and satellite (i.e., CloudSAT, AMSU-B) observations as well as the observed cloud streak organization in the lake event. This latter result reveals that WRF was able to capture the cloud macro-structure reasonably well.

Shi, J. J.↗

A Hybrid RANS-LES Perspective for the High Lift Common Research Model Using LAVA

An assessment of a Hybrid RANS/LES (HRLES) approach for𝐶𝐿,max prediction is presented for the NASA High-Lift Common Research Model (CRM-HL). Both the free air and the wind tunnel configuration of the CRM-HL are investigated and the results are compared to the QinetiQ wind tunnel experiments and to two other numerical approaches: Reynolds Averaged Navier-Stokes (RANS) and Wall-Modeled Large Eddy Simulations (WMLES). For the free-air configuration, HRLES was shown to address some of the known shortcomings in RANS methods and prevent inboard and outboard flow separation particularly in the region of𝐶𝐿,max and post-stall. To achieve these improvements over RANS, LES-appropriate grids and numerical discretizations are required. HRLES predicts a weak pitch break at the highest angle-of-attack due to onset of wing-root corner flow separation whereas the free-air corrected experiment values indicate an occurrence of a much stronger pitch break. The improvements of HRLES over a URANS approach has been objectively shown by computing a set of solutions with the same grid, same numerics and time-step size and comparing the solutions. It was also found that when applying HRLES to a RANS best practice grid and numerics that the HRLES method significantly under performed RANS. For the in tunnel configuration, HRLES showed good agreement with the loads, surface pressure and oil-flow photographs obtained in the experiment. HRLES was able to improve upon the RANS simulations, which showed a sharp loss of lift at the two highest angles-of-attack due to large scale inboard and outboard separation on the wing, by correctly predicting the corner flow separation and showing remarkably close agreement in the flow topologies with the experiment.

TTT↗

Transition Studies on a Swept-Wing Model

The present investigation contributes to the understanding of boundary-layer stability and transition by providing detailed measurements of carefully-produced stationary crossflow vortices. It is clear that a successful prediction of transition in swept-wing flows must include an understanding of the detailed physics involved. Receptivity and nonlinear effects must not be ignored. Linear stability theory correctly predicts the expected wavelengths and mode shapes for stationary crossflow, but fails to predict the growth rates, even for low amplitudes. As new computational and analytical methods are developed to deal with three-dimensional boundary layers, the data provided by this experiment will serve as a useful benchmark for comparison.

Saric, William S.↗

A Mixed-Mode I/II Fracture Criterion and Its Application in Crack Growth Predictions

A crack tip opening displacement (CTOD)-based, mixed mode fracture criterion is developed for predicting the onset and direction of crack growth. The criterion postulates that crack growth occurs in either the Mode I or Mode II direction, depending on whether the maximum in either the opening or the shear component of CTOD, measured at a specified distance behind the crack tip, attains a critical value. For crack growth direction prediction, the proposed CTOD criterion is shown to be equivalent to seven commonly used crack growth criteria under linearly elastic and asymptotic conditions. Under elastic-plastic conditions the CTOD criterion's prediction of the dependence of the crack growth direction on the crack-up mode mixity is in excellent agreement with the Arcan test results. Furthermore, the CTOD criterion correctly predicts the existence of a crack growth transition from mode I to mode II as the mode mixity approaches the mode II loading condition. The proposed CTOD criterion has been implemented in finite element crack growth simulation codes Z1P2DL and FRANC2DL to predict the crack growth paths in (a) a modified Arcan test specimen and fixture made of AL 2024-T34 and (b) a double cantilever beam (DCB) specimen made of AL 7050. A series of crack growth simulations have been carried out for the crack growth tests in the Arcan and DCB specimens and the results further demonstrate the applicability of the mixed mode CTOD fracture criterion crack growth predictions and residual strength analyses for airframe materials.

Sutton, Michael A.↗

It's All Relative: A Validation of Radiation Quality Comparison Metrics

Historically, the relative biological effectiveness (RBE) has been calculated to quantify the difference between heavy ion and gamma ray radiation. The RBE is then applied to gamma ray data to predict the effects of heavy ions in humans. The RBE is an iso-effect dose-to-dose ratio which, due to its counterintuitive nature, has been commonly miscalculated as an iso-dose effect-to-effect ratio. A paper recently published by Shuryak et al described this second measure intentionally for the first time in 2017, referring to it as the radiation effects ratio (RER). In this study, we utilized simulations to test the ability of both the RBE and the RER to predict known heavy ion effects. RBEs and RERs were calculated using mouse data from Chang et al, and the ability of the RBE and RER to predict the heavy ion data from which they were calculated was verified. Statistical transformations often utilized during data analysis were applied to the gamma and heavy ion data to determine whether RBE and RER are each uniquely defined measures. Scale changes are expected when translating effects from mice to humans and between human populations; gamma and heavy ion data were transformed to represent potential scale changes. The ability of the RBE and RER to predict the transformed heavy ion data from the transformed gamma data was then tested. The RBE but not the RER was uniquely defined after all statistical transformations. The RBE correctly predicted the scale-transformed heavy ion data, while the RER did not. This presentation describes potential implications for both metrics in light of these findings.

Chappell, L. J.↗

Space sickness predictors suggest fluid shift involvement and possible countermeasures

Preflight data from 64 first time Shuttle crew members were examined retrospectively to predict space sickness severity (NONE, MILD, MODERATE, or SEVERE) by discriminant analysis. From 9 input variables relating to fluid, electrolyte, and cardiovascular status, 8 variables were chosen by discriminant analysis that correctly predicted space sickness severity with 59 pct. success by one method of cross validation on the original sample and 67 pct. by another method. The 8 variables in order of their importance for predicting space sickness severity are sitting systolic blood pressure, serum uric acid, calculated blood volume, serum phosphate, urine osmolality, environmental temperature at the launch site, red cell count, and serum chloride. These results suggest the presence of predisposing physiologic factors to space sickness that implicate a fluid shift etiology. Addition of a 10th input variable, hours spent in the Weightless Environment Training Facility (WETF), improved the prediction of space sickness severity to 66 pct. success by the first method of cross validation on the original sample and to 71 pct. by the second method. The data suggest that WETF training may reduce space sickness severity.

Simanonok, K. E.↗

Towards a structure-based turbulence model

The author is developing a new type of turbulence model in which a new one-point quantity, the eddy structure tensor, carries information about the two-point structure of the turbulence. The model was motivated by the observation that conventional one-point turbulence models based only on the turbulent stresses do not predict the rapid changes in state that are found when anisotropic homogeneous turbulence is subjected to mean rotation, and hence are fundamentally incorrect for rotation. The model appears to give topologically correct predictions for the changes in stress state and structure state under all types of rapid distortions of homogeneous turbulence.

Reynolds, W. C.↗