SEARCH · Engineering Papers

Results for “power law process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2015

The Effect of Stochastically Varying Creep Parameters on Residual Stresses in Ceramic Matrix Composites

Constituent properties, along with volume fraction, have a first order effect on the microscale fields within a composite material and influence the macroscopic response. Therefore, there is a need to assess the significance of stochastic variation in the constituent properties of composites at the higher scales. The effect of variability in the parameters controlling the time-dependent behavior, in a unidirectional SCS-6 SiC fiber-reinforced RBSN matrix composite lamina, on the residual stresses induced during processing is investigated numerically. The generalized method of cells micromechanics theory is utilized to model the ceramic matrix composite lamina using a repeating unit cell. The primary creep phases of the constituents are approximated using a Norton-Bailey, steady state, power law creep model. The effect of residual stresses on the proportional limit stress and strain to failure of the composite is demonstrated. Monte Carlo simulations were conducted using a normal distribution for the power law parameters and the resulting residual stress distributions were predicted.

processing↗

NASA NTRS1971

Charge composition of galactic cosmic radiation

Experimental results from the balloon borne ionization spectrometer have enabled the extension of the measurement of the energy spectra of cosmic rays to 10 to the 12th power eV. The exposure factor for this flight was 1825 sq m/sr/sec and approximately 10,000 nuclei with Z greater than or equal to 3 have been observed. Differential spectra of individual nuclei from lithium to oxygen and from groups of nuclei with Z = 10-14, 15-19, 20-23, and 24-30 energy range 2 x 10 to the 10th eV to 10 to the 12th eV are described in a power law representation. Results indicate that the composition of galactic cosmic rays remains similar to that observed at lower energies. These results from direct measurements provide evidence for the processes of source acceleration with interstellar propagation remaining essentially energy independent up to 10 to the 12th power eV.

Ormes, J. F.↗

NASA NTRS1982

A qualitative interpretation of 7 August 1972 impulsive phase flare H alpha line profiles

The considered investigation shows that existing models of the formation of the H-alpha line during flares appear to provide clear qualitative evidence that heating of the H-alpha forming regions of the flare chromosphere in the bright H-alpha kernels observed during the impulsive phase of solar flares is not due primarily to heating by Coulomb collisions of a power-law distribution of 10-100 keV electrons with chromospheric material. It appears rather that some shorter-range process, involving possibly conduction or optically thick radiative transfer, is favored. Such a conclusion is clearly relevant to collisionless confinement modelling. However, much work remains to be done before there will be a basis for quantitatively testing the consistency of the considered picture with chromospheric diagnostics.

Canfield, R. C.↗

NASA NTRS1992

Multiple resonant scattering in the Compton upscatter model of gamma-ray bursts

Resonant Compton scattering, an increasingly popular mechanism for suppressing X-rays and producing gamma rays, must be treated as a multiple-scattering process for conditions thought characteristic of gamma-ray bursts. Photons that multiply scatter with a beamed power-law electron distribution in a uniform magnetic field produce a flat spectrum between the cyclotron frequency and an optical-depth-dependent critical energy; this critical energy ranges between several hundred keV and several MeV. Above this critical energy, the gamma-ray spectrum has a shape determined by the electron distribution and described by a single-scattering model. Only electron distributions that are nearly proportional to the electron momentum are able to simultaneously suppress X-rays and produce a single-scattering spectrum. As the Thomson optical depth approaches unity, photons that experience multiple scatterings often spawn additional photons at a rate that makes the model unphysical.

Brainerd, J. J.↗

NASA NTRS1992

The time-domain behavior of power-law noises

The power spectra of many geophysical phenomena are well approximated by a power-law dependence on frequency or wavenumber. A simple expression for the root-mean-square variability of a process with such a spectrum over an interval of time or space is derived. The resulting expression yields the powerlaw time dependence characteristic of fractal processes, but can be generalized to give the temporal variability for more general spectral behaviors. The method is applied to spectra of crustal strain (to show what size of strain events can be detected over periods of months to seconds) and of sea level (to show the difficulty of extracting long-term rates from short records).

Agnew, Duncan C.↗

NASA NTRS1991

Wave interactions with continuous fractal layers

Many natural structures possess self-similar multiscales which can be characterized by power law spectra. Under appropriate conditions, knowledge of the strength of these scale sizes provides information on the physical processes which formed these objects. In this paper, we investigate wave interactions with continuous fractal layers which model geological and variegated structures. Since fractal characteristics of the layers are embedded in the scattered field, they can be retrieved under appropriate conditions. This inversion can be performed in either the frequency or the time domain as desired.

Kim, Y.↗

NASA NTRS1993

A SIMULINK environment for flight dynamics and control analysis: Application to the DHC-2 Beaver. Part 1: Implementation of a model library in SIMULINK. Part 2: Nonlinear analysis of the Beaver autopilot

The design of advanced Automatic Aircraft Control Systems (AACS's) can be improved upon considerably if the designer can access all models and tools required for control system design and analysis through a graphical user-interface, from within one software environment. This MSc-thesis presents the first step in the development of such an environment, which is currently being done at the Section for Stability and Control of Delft University of Technology, Faculty of Aerospace Engineering. The environment is implemented within the commercially available software package MATLAB/SIMULINK. The report consists of two parts. Part I gives a detailed description of the AACS design environment. The heart of this environment is formed by the SIMULINK implementation of a nonlinear aircraft model in block-diagram format. The model has been worked out for the old laboratory aircraft of the Faculty, the De Havilland DHC-2 'Beaver', but due to its modular structure, it can easily be adapted for other aircraft. Part I also describes MATLAB programs which can be applied for finding steady-state trimmed-flight conditions and for linearization of the aircraft model, and it shows how the built-in simulation routines of SIMULINK have been used for open-loop analysis of the aircraft dynamics. Apart from the implementation of the models and tools, a thorough treatment of the theoretical backgrounds is presented. Part II of this report presents a part of an autopilot design process for the 'Beaver' aircraft, which clearly demonstrates the power and flexibility of the AACS design environment from part I. Evaluations of all longitudinal and lateral control laws by means of nonlinear simulations are treated in detail. The AACS design environment from part I proved to be a very useful tool for designing the control laws of the 'Beaver' autopilot within a very tight time-schedule. The autopilot design process itself will be used as a guideline for future AACS research at the Faculty of Aerospace Engineering. Flight tests of the 'Beaver' autopilot, done after evaluating the control laws in the SIMULINK package, proved to be quite successful. In the future, the AACS design package will evolve into a standardized, integrated design environment which can be applied to virtually any type of aircraft. The AACS design cycle will be shortened further by developing tools for automatically porting control laws from the MATLAB/SIMULINK environment to a piloted real-time flight simulator and the Flight Control Computers of the aircraft.

Flight Control System Design↗

NASA NTRS1994

Database tomography for commercial application

Database tomography is a method for extracting themes and their relationships from text. The algorithms, employed begin with word frequency and word proximity analysis and build upon these results. When the word 'database' is used, think of medical or police records, patents, journals, or papers, etc. (any text information that can be computer stored). Database tomography features a full text, user interactive technique enabling the user to identify areas of interest, establish relationships, and map trends for a deeper understanding of an area of interest. Database tomography concepts and applications have been reported in journals and presented at conferences. One important feature of the database tomography algorithm is that it can be used on a database of any size, and will facilitate the users ability to understand the volume of content therein. While employing the process to identify research opportunities it became obvious that this promising technology has potential applications for business, science, engineering, law, and academe. Examples include evaluating marketing trends, strategies, relationships and associations. Also, the database tomography process would be a powerful component in the area of competitive intelligence, national security intelligence and patent analysis. User interests and involvement cannot be overemphasized.

Kostoff, Ronald N.↗

NASA NTRS2004

Gamma-ray Spectral Characteristics of Thermal and Non-thermal Emission from Three Black Holes

Cygnus X-1 and the gamma-ray transients GROJ0422+32 and GROJ1719-24 displayed similar spectral properties when they underwent transitions between the high and low gamma-ray (30 keV to few MeV) intensity states. When these sources were in the high (gamma)-ray intensity state ((gamma)2, for Cygnus X-l), their spectra featured two components: a Comptonized shape below 200-300 keV with a soft power-law tail (photon index >= 3) that extended to ~1 MeV or beyond. When the sources were in the low-intensity state ((gamma)0, for Cygnus X-l), the Comptonized spectral shape below 200 keV typically vanished and the entire spectrum from 30 keV to ~1 MeV can be characterized by a single power law with a relatively harder photon index ~2-2.7. Consequently the high- and low-intensity gamma-ray spectra intersect, generally in the ~400 KeV - ~1 MeV range, in contrast to the spectral pivoting seen previously at lower (~10 keV) energies. The presence of the power-law component in both the high- and low-intensity gammaray spectra strongly suggests that the non-thermal process is likely to be at work in both the high and the low-intensity situations. We have suggested a possible scenario (Ling & Wheaton, 2003), by combining the ADAF model of Esin et al. (1998) with a separate jet region that produces the non-thermal gamma-ray emission, and which explains the state transitions. Such a scenario will be discussed in the context of the observational evidence, summarized above, from the database produced by EBOP, JPL's BATSE earth occultation analysis system.

black holes↗

NASA NTRS1992

Fractals and cosmological large-scale structure

Observations of galaxy-galaxy and cluster-cluster correlations as well as other large-scale structure can be fit with a 'limited' fractal with dimension D of about 1.2. This is not a 'pure' fractal out to the horizon: the distribution shifts from power law to random behavior at some large scale. If the observed patterns and structures are formed through an aggregation growth process, the fractal dimension D can serve as an interesting constraint on the properties of the stochastic motion responsible for limiting the fractal structure. In particular, it is found that the observed fractal should have grown from two-dimensional sheetlike objects such as pancakes, domain walls, or string wakes. This result is generic and does not depend on the details of the growth process.

Luo, Xiaochun↗

NASA NTRS2011

Surface Modeling to Support Small-Body Spacecraft Exploration and Proximity Operations

In order to simulate physically plausible surfaces that represent geologically evolved surfaces, demonstrating demanding surface-relative guidance navigation and control (GN&C) actions, such surfaces must be made to mimic the geological processes themselves. A report describes how, using software and algorithms to model body surfaces as a series of digital terrain maps, a series of processes was put in place that evolve the surface from some assumed nominal starting condition. The physical processes modeled in this algorithmic technique include fractal regolith substrate texturing, fractally textured rocks (of empirically derived size and distribution power laws), cratering, and regolith migration under potential energy gradient. Starting with a global model that may be determined observationally or created ad hoc, the surface evolution is begun. First, material of some assumed strength is layered on the global model in a fractally random pattern. Then, rocks are distributed according to power laws measured on the Moon. Cratering then takes place in a temporal fashion, including modeling of ejecta blankets and taking into account the gravity of the object (which determines how much of the ejecta blanket falls back to the surface), and causing the observed phenomena of older craters being progressively buried by the ejecta of earlier impacts. Finally, regolith migration occurs which stratifies finer materials from coarser, as the fine material progressively migrates to regions of lower potential energy.

Riedel, Joseph E.↗

NASA NTRS1984

Light Scattered from Polished Optical Surfaces: Wings of the Point Spread Function

Random figure errors from the polishing process plus particles on the main mirrors in a telescope cause an extended point spread function (PSF) declining approximately as the inverse square of the sine of the angle from a star from about 100 micro-rad to a right angle. The decline in at least one case, and probably in general, proceeds as the inverse cube at smaller angles where the usual focal plane aperture radius is chosen. The photometric error due to misalignment by one Airy ring spacing with an aperture of n rings depends on the net variance in the figure. It is approximately 60/(n+1)(3) when using the data of Kormendy (1973). A typical value is 6 x 10 to the -5th power per ring of misalignment with n = 100 rings. The encircled power may be modulated on a time scale of hours by parts per thousand in a wavelength dependent manner due to relative humidity effects on mirror dust. The scattering according to an inverse power law is due to a random walk in aberration height caused by a multitude of facets and slope errors left by the polishing process. A deviation from such a law at grazing emergence may permit monitoring the dust effects.

Kenknight, C. E.↗

NASA NTRS2016

Open Source Radiation Hardened by Design Technology

The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.

Shuler, Robert↗

NASA NTRS1986

Monte Carlo spectra from pair-equilibrium, weakly magnetized thermal plasmas

The results of Monte Carlo simulations of weakly magnetized, relativistic thermal plasmas are reported, including such physical processes as thermal synchrotron emission and absorption, bremsstrahlung, and Compton scattering, as well as pair-annihilation and pair-production. The rates of the latter two processes are kept approximately equal to each other, i.e., the plasmas are in pair equilibrium. The resulting spectra are of power-law form, and can be well described by a set of simple analytical formulae. Neither a pair annihilation feature nor a Wien hump is seen in the spectra. The possible relevance of the results to active galactic nuclei and gamma-bursts is discussed.

Zdziarski, A. A.↗

NASA NTRS2007

HST/ACS Coronagraphic Observations of the HD 163296 Circumstellar Disk: Evidence of Time-Variable Self-Shadowing?

We present Hubble Space Telescope Advanced Camera for Surveys (HST/ACS) coronagraphic observations of the Herbig Ae star HD 163296. HD 163296's scattered light disk was resolved in the F606W and F814W filters in observations obtained In 2003 and in the F435W filter in observations obtained in 2004. Analysis of single-epoch data indicates that the disk (V-I) color is redder than the observed stellar (V-I) color. This spatially uniform red disk color might be indicative of either an evolution in the grain size distribution (i.e. grain growth) and/or composition. Both of these processes would be consistent with the observed flat geometry of the outer disk, as diagnosed by the observed r$(exp -3)$ power law behavior of its median azimuthally averaged disk surface brightness, which suggest that grain evolution is occurring. Comparison of ACS and STIS epoch scattered light data reveals differences in the observed disk surface brightnesses, of order 1 mag arcsec$(exp -2)$, in both V and white-light filter bandpasses. Along with the observed variability in the visibility and surface brightness of the ansa(e) in the disk, and spectropolarimetric variability of the system, these results suggest that the resolved scattered light disk is variable, a phenomenon not previously observed in any other Herbig protoplanetary system We speculate that the observed behavior might be attributable to the variable inflation of the scale height of the inner disk wall, which results in variable self-shadowing of the outer disk.

Wisniewski, J.↗

NASA NTRS2017

Microphysical Properties of Snow and Their Link to Ze-S Relations During BAECC 2014

This study uses snow events from the Biogenic Aerosols-Effects on Clouds and Climate (BAECC) 2014 campaign to investigate the connection between properties of snow and radar observations. The general hydrodynamic theory is applied to video-disdrometer measurements to retrieve masses of falling ice particles. Errors associated with the observation geometry and the measured particle size distribution (PSD) are addressed by devising a simple correction procedure. The value of the correction factor is determined by comparison of the retrieved precipitation accumulation with weighing-gauge measurements. Derived mass-dimensional relations are represented in the power-law form m = amDbm. It is shown that the retrieved prefactor am and exponent bm react to changes in prevailing microphysical processes. From the derived microphysical properties, event-specific relations between the equivalent reflectivity factor Ze and snowfall precipitation rate S (Ze = 5 azsSbzs ) are determined. For the studied events, the prefactor of the Ze-S relation varied between 53 and 782 and the exponent was in the range of 1.19-1.61. The dependence of the factors azs and bzs on the m(D) relation and PSD are investigated. The exponent of the Ze-S relation mainly depends on the exponent of the m(D) relation, whereas the prefactor azs depends on both the intercept parameterN0 of the PSDand the prefactors of them(D) andy(D) relations. Changes in azs for a given N0 are shown to be linked to changes in liquid water path, which can be considered to be a proxy for degree of riming.

von Lerber, Annakaisa↗

NASA NTRS2015

The Effect of Stochastically Varying Creep Parameters on Residual Stresses in Ceramic Matrix Composites

residual stress↗

NASA NTRS1983

The potential of SAR directional spectra in operational wave forecasting

Digitally processed Seasat SAR ocean wave imagery, when digitally transformed, smoothed, and corrected for known instrument biases, can accurately track multiple (at least three) wave systems in the open ocean, across major currents, and into shallow water. Furthermore, the relative backscatterer of the digitally processed SAR image, when sampled within a single pass and along a constant range, responds to the local wind through a simple power law relationship. The results indicate that SAR spectra, if obtained from a low altitude satellite, could be an important supplement to global winds and non-directional wave heights obtained through other methods.

Beal, R. C.↗