Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “photoelectrochemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sputter-Coated TiO 2 Films as Passivation and Hole Transfer Layers for Improved Energy Conversion with Solar Fuel WO 3 /CuWO 4 Photoanodes

Atomic layer deposited (ALD) “leaky” TiO 2 have gained interest as charge-selective protection layers for semiconductor solar fuel electrodes. Here we demonstrate the use of sputter-deposited TiO 2 layers as hole selective contacts for WO 3 /CuWO 4 type 2 heterojunction water oxidation photoanodes for the first time. TiO 2 protection layers with varying thicknesses (2 to 128 nm) were deposited using the RF magnetron sputtering technique. The resulting TiO 2 films are amorphous based on Raman spectroscopy and powder XRD. Photoelectrochemical scans and Vibrating Kelvin probe photovoltage spectroscopy show that 2-8 nm TiO 2 layers nearly double the photocurrent to 0.97 mA cm -2 under AM 1.5 illumination (19% AQE at 350 nm), increase the surface photovoltage signal by 25%, and increase the WO 3 /CuWO 4 bandgap. These effects can be attributed to the selectivity of TiO 2 for photoholes. Additionally, SPV data suggest that TiO 2 overlayers suppress copper-based surface recombination defects. Reduced photocurrent and the photovoltage are seen in thicker TiO 2 films (16 to 128 nm) as a result of an increasing hole transfer resistance and because of light shading effects according to photoaction spectra. The TiO 2 films also improve the stability of the WO 3 /CuWO 4 photoelectrodes, allowing nearly constant O 2 evolution over 3 hours after an initial 20-35% loss. Overall, this work establishes RF magnetron sputtering as a useful method to install amorphous TiO 2 passivation layers for improved WO 3 /CuWO 4 solar fuel photoelectrodes. Furthermore, we show how the combination of PEC with SPV measurements provides insight into the function of the TiO 2 coatings.

CuWO4↗
DOE OSTI2026

Unraveling Defect-Dependent Conductivity-Type Switching in CuFe 2 O 4 for Enhanced Photoelectrocatalytic Reduction of Benzaldehyde

Photoelectrocatalytic (PEC) reduction provides a sustainable route for upgrading biomass-derived feedstocks with reduced energy requirements, yet remains largely unexplored beyond hydrogen evolution and CO 2 reduction due to the scarcity of stable photocathodes. Here, we report a defect-engineered CuFe 2 O 4 photocathode that enables directly quantified PEC reduction of benzaldehyde to benzyl alcohol using a singlecomponent, earth-abundant oxide. By controlling annealing temperature and oxygen partial pressure, CuFe 2 O 4 is systematically tuned from n-type to p-type conductivity. Electrochemical measurements, X-ray and ultraviolet photoelectron spectroscopy, and firstprinciples defect calculations collectively show that oxygen-rich annealing conditions suppress deep donor-type oxygen vacancies while stabilizing shallow acceptor-type copper vacancies, resulting in enhanced hole concentration and improved charge transport. In a mixed acetonitrile/water electrolyte employing 1,4-benzoquinone as a redox mediator, the optimized CuFe 2 O 4 photocathode achieves stable photoelectrochemical operation over 18 h under continuous illumination with a benzyl alcohol production rate of 2.57 μmol/h at −0.50 V vs Ag/AgNO 3 , corresponding to a Faradaic efficiency of 51.3%. This PEC approach lowers the required applied potential by ∼1 V compared to traditional electrocatalytic methods, offering a more energy-efficient route for carbonyl reduction. These findings establish CuFe 2 O 4 as a viable photocathode platform for sustainable photoelectrocatalytic organic transformations under mild reaction conditions.

benzaldehyde reduction↗
DOE OSTI2020

Macroscale and Nanoscale Photoelectrochemical Behavior of p-Type Si(111) Covered by a Single Layer of Graphene or Hexagonal Boron Nitride

Two-dimensional (2D) materials may enable a general approach to the introduction of a dipole at a semiconductor surface as well as control over other properties of the double layer at a semiconductor/liquid interface. Vastly different properties can be found in the 2D materials currently studied due in part to the range of the distribution of density-of-states. In this work, the open-circuit voltage (V oc ) of p-Si–H, p-Si/Gr (graphene), and p-Si/h-BN (hexagonal boron nitride) in contact with a series of one-electron outer-sphere redox couples was investigated by macroscale measurements as well as by scanning electrochemical cell microscopy (SECCM). The band gaps of Gr and h-BN (0–5.97 eV) encompass the wide range of band gaps for 2D materials, so these interfaces (p-Si/Gr and p-Si/h-BN) serve as useful references to understand the behavior of 2D materials more generally. The value of Voc shifted with respect to the effective potential of the contacting solution, with slopes (ΔV oc /ΔE Eff ) of -0.27 and -0.38 for p-Si/Gr and p-Si/h-BN, respectively, indicating that band bending at the p-Si/h-BN and p-Si/Gr interfaces responds at least partially to changes in the electrochemical potential of the contacting liquid electrolyte. Additionally, SECCM is shown to be an effective method to interrogate the nanoscale photoelectrochemical behavior of an interface, showing little spatial variance over scales exceeding the grain size of the CVD-grown 2D materials in this work. The measurements demonstrated that the polycrystalline nature of the 2D materials had little effect on the results and confirmed that the macroscale measurements reflected the junction behavior at the nanoscale.

2D material↗
DOE OSTI2020

Genesis and Propagation of Fractal Structures During Photoelectrochemical Etching of n-Silicon

The genesis, propagation, and dimensions of fractal-etch patterns that form anodically on front- or back-illuminated n-Si(100) photoelectrodes in contact with 11.9 M NH 4 F (aqueous) have been investigated during either a linear potential sweep or a constant potential hold ( E = +6.0 V versus Ag/AgCl). Optical images collected in situ during electrochemical experiments reflected the location and underlying mechanism of initiation and propagation of the structures on the surface. X-ray photoelectron spectroscopic (XPS) data collected for samples emersed from the electrolyte at varied times provided detailed information about the chemistry of the surface during fractal etching. The fractal structure was strongly influenced by the orientation of the crystalline Si sample. Furthermore, the etch patterns were initially generated at points along the circumference of bubbles that formed upon immersion of n-Si(100) samples in the electrolyte, most likely due to the electrochemical and electronic isolation of areas beneath bubbles. XPS data showed the presence of a tensile-stressed silicon surface throughout the etching process as well as the presence of SiO x F y on the surface. The two-dimensional fractal dimension, D f,2D , of the patterns increased with etching time to a maximum observed value of D f,2D = 1.82. Promotion of fractal etching near etch masks that electrochemically and electronically isolated areas of the photoelectrode surface enabled the selective placement of highly branched structures at desired locations on an electrode surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stacking Independence and Resonant Interlayer Excitation of Monolayer WSe 2 /MoSe 2 Heterostructures for Photocatalytic Energy Conversion

Here, we report a comparison of the photocatalytic performance of WSe 2 -on-MoSe 2 and MoSe 2 -on-WSe 2 heterostructures. While built-in electric fields exist in these heterostructures on the order of 100 kV/cm due to band offsets between these two materials, the photocatalytic performance (i.e., photocurrent) is independent of the stacking order of the two materials. Solving Poisson’s equation under these conditions, we find that the built-in electric field produced in the heterostructure is at least 1 order of magnitude smaller than that produced in the electrochemical double layer (i.e., Helmholtz layer). Mott–Schottky measurements indicate that transition metal dichalcogenides (TMDCs) on ITO electrodes have similar capacitance to that of bare ITO, providing further evidence that the interfacial electric fields produced in the solid state heterostructure are negligible compared to the fields generated by the ions in solution. The photocatalytic performance of these heterostructures provided the largest relative enhancement in the heterojunction region under 920 and 785 nm irradiation compared with 532 and 633 nm wavelength excitation. Here, the 920 nm (1.35 eV) photons lie below the band gaps and produce very little photocurrent in the constituent monolayer materials but resonantly excite the interlayer optical transition in the heterostructure, producing a 5-fold enhancement in the measured photocurrent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

ZnTiN 2 as an Electron-Selective, Protective Layer on Si Photocathodes

Photoelectrochemical production of fuels requires photoelectrodes that efficiently convert sunlight to electrochemical energy by producing photovoltage and photocurrent and maintain this ability over time under a variety of pH, illumination, and applied bias conditions. Work in the photovoltaic community has demonstrated that interfaces with high charge carrier selectivity provide high photovoltages. This offers a co-design opportunity to create semiconductor photoelectrodes with contact layers that are both carrier-selective and offer protection from degradation in aqueous solutions. In this work, we explored the ternary nitride ZnTiN 2 as an electronselective, protective layer for Si-based photocathodes. We demonstrated that ZnTiN 2 formed a heterojunction with p-type Si that facilitated electron movement toward the ZnTiN 2 surface for light-driven reduction reactions. Across a variety of electrolyte conditions, ZnTiN 2 /Si produced an open circuit voltage of ca. 400 mV vs the solution potential, while bare Si produced 220−480 mV vs the solution potential depending on conditions. ZnTiN 2 was also shown to protect Si over 72 h at open circuit in the dark in 0.1 M KHCO 3 aqueous solution at pH 10.5, with a 2.4% loss in open circuit voltage compared to a 17% loss for unprotected Si. A protective effect was also observed under illumination during methyl viologen reduction at pH 3.5 for 21 h, with a 2.5% loss in open circuit voltage observed for ZnTiN 2 /Si compared to a 25% loss in open circuit voltage for unprotected Si under the same conditions. Elemental characterization revealed the presence of oxides on the surface of ZnTiN 2 that are consistent with the Pourbaix diagram after photoelectrochemical operation; these oxides appeared to support durability without hindering charge carrier extraction to drive electrochemical work. This work highlights the promise of ZnTiN 2 for durable photoelectrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Oxygen Evolution on Mechanically Strained TiO2/NiTi: Implications of Compositional Heterogeneity at (Photo)Electrocatalytic Interfaces

The adsorption and activation energetics underpinning small molecule conversion on heterogeneous (photo)electrocatalysts are intrinsically tied to catalyst surface properties. Absent compositional characterization techniques with sufficient interface sensitivity, however, (photo)electrochemical performance can be misinterpreted in the context of bulk or near-surface material properties. Here we provide a fundamental investigation of the convoluting role of near-surface compositional heterogeneity in the interpretation of (photo)electrochemical alkaline oxygen evolution reaction (OER) activity, highlighting challenges in correlating composition measured by surface- and near-surface-sensitive probes. TiO2 thin films grown by air-annealing the superelastic alloy Nitinol (TiO2/NiTi) crack under tensile mechanical strain, increasing the number of electrochemically active Ni sites (Ni site density) that are probed via voltammetric features corresponding to Ni3+/Ni2+ redox events. (Photo)electrochemical OER kinetics trend with Ni site density, with overpotentials and Tafel slopes decreasing for Ni site densities < 1013 Ni/cm2geo and asymptotically approaching the performance of the base NiTi substrate for Ni site densities > 1013 Ni/cm2geo. Photoelectrochemical fill factors follow similar Ni site density dependent trends. When probing unstrained TiO2/NiTi, Ni site densities are two orders of magnitude higher when comparing near-surface-sensitive techniques (e.g., X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectrometry (TOF-SIMS), and scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDS)) to surface-sensitive electrochemical measurements. This result highlights the challenge of correlating kinetic performance with intrinsic surface properties of electrochemical interfaces in the presence of near-surface compositional heterogeneity. Further, it reinforces the importance of fundamental investigations of surfaces with well-controlled composition and structure and the need for physically grounded and self-consistent interpretation of multiple near-surface characterization techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The Cascade Effectiveness of 3-Terminal Tandem Photocathode Architectures as Applied to CO 2 Reduction

Cascade catalysis for photoelectrochemical CO 2 reduction (CO 2 R) decouples the overall reaction into sequential steps occurring on separately optimized catalysts (for example, Ag and Cu) between which an intermediate species such as CO is transferred. A 3-terminal tandem (3TT) photovoltaic architecture advantageously holds two different catalytic regions at different potentials under a single illumination source, but its overall efficiency is low. Using a stochastic reaction-diffusion model, we have examined 3TT photocathode design principles, focusing on the coupling of surface chemistry and transport of CO both inside the boundary layer and outward, into the bulk electrolyte. We find that ensuring that the lateral diffusion distance within the boundary layer is short compared to the boundary layer thickness and controlling bulk flow are key, with interdigitated designs showing an overall conversion efficiency improvement by 2 orders of magnitude compared to the side-by-side case without flow. These findings can be adapted for other cascaded architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Intrachain Electron Transport in a Naphthalene Diimide–Bithiophene Copolymer: A Mixed-Valence Approach

The mechanism of electron transport in the polymer P(NDI2OD-T2) (poly(N,N'-bis-2-octyldodecylnaphthalene-1,4,5,8-bis-dicarboximide-2,6-diyl-alt-2,2'-bithiophene-5,5'-diyl), N2200) is investigated. Here, we use spectroelectrochemical measurements on P(NDI2OD-T2), spectroscopic studies of a chemically reduced model compound, 2,2'-(2,2'-bithiophene-5,5'-diyl)-bis(N,N'-di-n-hexylnaphthalene-1,8:4,5-bis(dicarboximide)) (NDI-T2-NDI), and electronic structure calculations to evaluate the microscopic charge-transport parameters. Experimental and computational data suggest that NDI-T2-NDI•– is a class-II mixed-valence compound, strongly supporting the small-polaron hopping model as a charge-transport mechanism for electrons along polymer chains in P(NDI2OD-T2). The electronic coupling between the NDI redox units is at least 21 meV, while the reorganization energy is between 0.45 and 0.56 eV. Using a hopping model, we estimated the mobility and activation energy for electron transport along P(NDI2OD-T2) polymer chains to be 0.15 cm 2 V –1 s –1 and 60 meV, respectively. Our study elucidates a long-standing issue of explaining the coexistence in P(NDI2OD-T2) of localized redox sites with relatively large electron mobilities more usually achieved only in highly conjugated polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unequal {110} Facets: The Potential Role of Intraparticle Heterogeneity and Facet Termination in Photoelectrochemical Activity of Single BiVO 4 Particles

BiVO 4 photoanodes are promising for solar water splitting, with photogenerated electrons and holes preferentially reacting at top {010} and lateral {110} facets, respectively. However, the mechanisms driving this facet-dependent reactivity remain unclear. Here, in this study, we investigate facet-dependent photocurrent and material heterogeneity using correlative scanning photoelectrochemical microscopy (SPCM), electron beam induced current (EBIC) mapping, and mid-IR scattering scanning near-field optical microscopy (s-SNOM). SPCM measurements of 62 BiVO 4 particles confirmed higher photocurrents at lateral {110} facets compared to top {010} facets, but unexpectedly revealed variations in photocurrent among lateral facets within the same particle. Variations in lateral facet surface termination could explain the intraparticle-level reactivity heterogeneity, consistent with theoretical predictions. Nano-FTIR spectroscopy and Raman microspectroscopy indicated significant materials chemistry heterogeneity within individual particles and facets that could be attributed to variations in lattice vibration distortions that enhance the overlap between Bi 6s and O 2p orbitals. The increased orbital overlap is significant as it potentially increases hole mobility in the valence band and potentially explains the lateral facet-dependent charge separation efficiency observed in photocurrent maps. Facet-dependent electrical and EBIC measurements showed no space charge regions at interfacet junctions or metal-BiVO 4 contacts under vacuum, suggesting that photogenerated holes beneath top {010} facets are unlikely to transport to lateral {110} facets to drive water/sulfite oxidation. These findings indicate the potential influence of distinct bulk properties and surface termination chemistries across different particles and facets, highlighting the importance of carefully controlling defects and surface chemistry during sample growth to optimize photocatalytic performance.

BiVO4↗
DOE OSTI2025

Mechanism of Mesoscale Woodpile Development via Photoelectrochemical Deposition of Se–Te

A combination of experiments and optical modeling provided insight into the mechanism of mesoscale woodpile formation in response to an orthogonal shift in polarization during photoelectrochemical deposition of Se–Te. Cathodic deposition of semiconducting Se–Te using spatially uniform, linearly polarized illumination produced arrays of lamellae that were aligned parallel to the optical E-field oscillation. Continued deposition in conjunction with an orthogonal shift in the polarization direction then produced aligned bridging features that spanned the void space between, and were orthogonal to, the preexisting lamellae. The height and pitch, respectively, in each layer of the woodpile were a function of the charge density and illumination wavelength during deposition. A Monte Carlo model, in which material addition was scaled by the absorption magnitude obtained from electromagnetic simulations, produced morphologies that were nominally identical to those observed experimentally. Here, the formation of mesoscale woodpiles is consistent with a mechanism that involves a series of spontaneously initiated, concerted light–matter interactions during the photoelectrochemical deposition process.

absorption↗
DOE OSTI2023

TaO x electron transport layers for CO 2 reduction Si photocathodes

Electron transport layers (ETLs) used as components of photocathodes for light-driven CO 2 reduction (CO 2 R) in aqueous media should have good electronic transport, be stable under CO 2 R conditions, and, ideally, be catalytically inert for the competing hydrogen evolution reaction (HER). Here, using planar p-Si (100) as the absorbing material, we show that TaO x satisfies all three of the above criteria. TaO x films were synthesized by both pulsed laser deposition (PLD) and radio-frequency (RF) sputtering. In both cases, careful control of the oxygen partial pressure during growth was required to produce ETLs with acceptable electron conductivity. p-Si/TaO x photocathodes were interfaced with ca. 10 nm of a CO 2 R catalyst: Cu or Au. Under front illumination with simulated AM 1.5G in CO 2 -saturated bicarbonate buffer, we observed, for both metals, faradaic efficiencies for CO 2 R products of ~50% and ~30% for PLD TaO x and RF sputtered TaO x , respectively, at photocurrent densities up to 8 mA cm -2 . p-Si/TiO 2 /Cu photocathodes were also evaluated but produced mostly H 2 (>97%) due to reduction of the TiO 2 to Ti metal under CO 2 R conditions. In contrast, a dual ETL photocathode (p-Si/TiO 2 /TaO x /Cu) was selective for CO 2 R, which suggests a strategy for separately optimizing selective charge collection and the stability of the ETL/water interface. The maximum photovoltage obtained with p-Si/TaO x /Cu devices was 300 mV which was increased to 430–460 mV by employing ion implantation to make pn + -Si/TaO x /Cu structures. Photocathodes with RF sputtered TaO x ETLs are stable for CO 2 R for at least 300 min. In conclusion, techno-economic analysis shows that the reported system, if scaled, could allow for an economically viable production of feedstocks for chemical synthesis under the adoption of specific CO 2 credit schemes, thus becoming a significant component of carbon-neutral manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ZnGa 2 Te 4 thin-film absorbers for photoelectrochemical CO 2 reduction

Photoelectrochemical (PEC) carbon dioxide reduction reaction (CO 2 RR) has been considered as a promising route to convert and store solar energy into chemical fuels. It is crucial to find suitable photoelectrode materials that are photo-catalytically active and exhibit excellent photochemical stability. One of the promising contenders is ZnTe with the ∼2.26 eV band gap and prolonged stability under CO 2 RR PEC conditions. Herein, a new telluride based thin-film ZnGa 2 Te 4 photocathode with lower band gap and stronger visible light absorption compared to ZnTe is synthesized and characterized using a combinatorial sputtering technique. A two-step annealing method with excess Te supply is implemented to synthesize nearly stoichiometric ZnGa 2 Te 4 absorber material with a zincblende-derived tetragonal crystal structure confirmed by synchrotron X-ray and electron diffraction. Theoretical calculations show that ZnGa 2 Te 4 has suitable direct bandgap (∼1.86 eV) and high absorption coefficient ∼10 5 cm −1 , in agreement with experimentally prepared films. Transient absorption spectroscopy reveals the biexponential decay dynamics, with time constants, τ 1 ∼ 0.04, and τ 2 ∼ 0.65 μs in microsecond time scales and provides the optical transition pathways for this semiconductor thin film. PEC measurements show that the ZnGa 2 Te 4 photocurrent densities are comparable to the widely investigated ZnTe photocathodes or even surpass it under simulated sunlight condition. ZnGa 2 Te 4 samples demonstrate promising photoelectrochemical stability, maintaining consistent performance under illumination. The inclusion of diaryliodonium additive substantially increases its CO 2 RR selectivity to ∼60%. These findings open a new avenue for the synthesis of telluride-based thin-film photocathodes for further exploration and will motivate future research to integrate this potential photocathode material into PEC devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Current loss analysis in photoelectrochemical devices

Ongoing efforts to stabilize the operation of photoelectrochemical (PEC) devices remain critical for achieving economically viable solar fuel production, as devices with lifetimes on the order of 10 to 30 years are projected requirements for utility-scale, PEC device implementation. However, insight into the causes of device degradation and activity losses is generally provided by monitoring the device current, a quantity which masks the relative contributions of photovoltaic component degradation and electrocatalyst activity drops to overall performance losses. In this study, an approach for deconvoluting the various contributors to PEC device losses is described. In particular, the causes for observed fluctuations in device performance are determined through the collection of real-time, current–voltage data, paired with an analytical method that enables the decomposition of drops in device current into its constituent photovoltaic- and catalyst-driven performance losses. We test the validity of this approach by applying it to the data collected for a PEC hydrogen evolution test-bed.

14 SOLAR ENERGY↗
DOE OSTI2020

On the origin of ground-state vacuum-field catalysis: Equilibrium consideration

Recent experiments suggest that vibrational strong coupling (VSC) may significantly modify ground-state chemical reactions and their rates even without external pumping. The intrinsic mechanism of this “vacuum-field catalysis” remains largely unclear. Generally, modifications of thermal reactions in the ground electronic states can be caused by equilibrium or non-equilibrium effects. The former are associated with modifications of the reactant equilibrium distribution as expressed by the transition state theory of chemical reaction rates, while the latter stem from the dynamics of reaching and leaving transition state configurations. In this work, we examine how VSC can affect chemical reactions rates in a cavity environment according to transition state theory. Our approach is to examine the effect of coupling to cavity mode(s) on the potential of mean force (PMF) associated with the reaction coordinate. Within the context of classical nuclei and classical photons and also assuming no charge overlap between molecules, we find that while the PMF can be affected by the cavity environment, this effect is negligible for the usual micron-length cavities used to examine VSC situations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗