Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phenomena”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Critical phenomena in a low gravity environment

Various types of critical point phenomena are discussed including the gas-liquid phase transition of a fluid, the spontaneous magnetization of a ferromagnet below the Curie temperature, and structural phase transitions of solid materials. The interrelation of thermodynamic properties by scaling laws is considered noting theories for the validity of scaling laws and the principle of universality. Gravity effects are reviewed noting that in earth-based experiments the phenomena are significantly influenced by the earth's gravitational field and that fluid samples that are spatially homogeneous cannot be realized near the gas-liquid critical point.

Sengers, J. V.↗
NASA NTRS1978

Critical phenomena experiments in space

The paper analyzes several types of critical phenomena in fluids, shows how they are affected by the presence of gravity, and describes how experiments conducted in an orbiting laboratory under low gravity conditions could extend the range of measurements needed to study critical phenomena. Future experiments are proposed. One would be a careful measurement of the dielectric constant in a low gravity environment. Two basic problems that can benefit especially from space experiments are the specific heat near the critical point and the shear viscosity at the gas-liquid critical point.

Sengers, J. V.↗
NASA NTRS1979

Video detection and analysis techniques of transient astronomical phenomena

Low-light-level television systems have been utilized to gain information on meteors, aurorae, and other faint, transient astronomical phenomena. Such phenomena change not only their position as a function of time, but also their photometric and spectral characteristics in as little as 1/60 second, thus requiring unique methods of analysis. Data observed with television systems and recorded on video tape have been analyzed with a system utilizing both analog and digital techniques. Both off-the-shelf equipment and inhouse developments are used to isolate sequences of moving images and to store them in a form suitable for photometric and spectral reduction. Current emphasis of the analysis effort is directed at the measurement of the first-order emission lines of meteor spectra, the results of which will yield important compositional information concerning the nature of the impinging meteoroid.

Clifton, K. S.↗
NASA NTRS1975

The prevention of electrical breakdown and electrostatic voltage problems in the space shuttle and its payloads. Part 1: Theory and phenomena

An introduction to the theory of corona discharge and electrostatic phenomena is presented. The theory is mainly qualitative so that workers in the field should not have to go outside this manual for an understanding of the relevant phenomena. Some of the problems that may occur with the space shuttle in regard to electrical discharge are discussed.

Whitson, D. W.↗
NASA NTRS1979

Some aspects of a free jet phenomena to 105 L/D in a constant area duct

The paper examines major constraints involved in the Borda tube free jet phenomena. Under certain conditions, inlets with a Borda type geometry show sufficiently strong separation effects to permit the working fluid to flow through the duct as if it were a 'free jet'. Mass limiting flow data and associated pressure profiles for tubes with L/D's ranging from 14 to 105 with a Borda type inlet were considered to determine bounds of the 'free jet' phenomena using fluid nitrogen. For a given tube roughness, the limits appear to be one dimensional and dependent only on inlet stagnation conditions. For smooth tubes, the upper L/D boundary is defined by an equation relating reduced pressure to reduced temperature, and the lower boundary represents saturation conditions at the inlet. Similar 'free jet' effects were found for fluid hydrogen indicating that fluid jetting may be common to all fluids.

Hendricks, R. C.↗
NASA NTRS1979

Free jet phenomena in a 90 deg-sharp edge inlet geometry

The effects of free-jet phenomena, jetting, in a 90-deg-sharp-edge inlet tube are analyzed. Mass-limiting flow data and associated pressure profiles for tubes of 53, 64, 73 and 105 L/D with a 90 deg-sharp-edge or orifice-type inlet are compared to Borda-type inlet data to determine bounds of the free-jet phenomena. For smooth tubes the limits appear to be one-dimensional and dependent only on inlet stagnation conditions. The upper L/D boundary is related by stagnation characteristics and the lower bound appears to be saturation conditions at the inlet. It is noted that similar free-jet effects were found for fluid hydrogen indicating that fluid jetting might be common to all fluids flowing through 90 deg-sharp-edge inlet geometries.

Hendricks, R. C.↗
NASA NTRS1980

A new asymptotic method for jump phenomena

Physical phenomena involving rapid and sudden transitions, such as snap buckling of elastic shells, explosions, and earthquakes, are characterized mathematically as a small disturbance causing a large-amplitude response. Because of this, standard asymptotic and perturbation methods are ill-suited to these problems. In the present paper, a new method of analyzing jump phenomena is proposed. The principal feature of the method is the representation of the response in terms of rational functions. For illustration, the method is applied to the snap buckling of an elastic arch and to a simple combustion problem.

Reiss, E. L.↗
NASA NTRS1980

Theoretical interpretation of Traveling Interplanetary Phenomena and their solar origins

A review is made of recent theoretical studies on Traveling Interplanetary Phenomena (TIP) and their possible solar origins in the context of mathematical methods and physical processes. Flare-generated interplanetary shocks are used as examples to illustrate the following set of contrasting approaches to the phenomena: analytical vs numerical, hydrodynamic vs magnetohydrodynamic, dissipative vs non-dissipative, continuum/macroscopic vs kinetic/microscopic. It is suggested in conclusion that future research should emphasize continuum/macroscopic physical processes together with the kinetic approach to deepen understanding of microscopic interactions.

Wu, S. T.↗
NASA NTRS1981

Nonlinear dynamic phenomena in the space shuttle thermal protection system

The development of an analysis for examining the nonlinear dynamic phenomena arising in the space shuttle orbiter tile/pad thermal protection system is presented. The tile/pad system consists of ceramic tiles bonded to the aluminum skin of the orbiter through a thin nylon felt pad. The pads are a soft nonlinear material which permits large strains and displays both hysteretic and nonlinear viscous damping. Application of the analysis to a square tile subjected to transverse sinusoidal motion of the orbiter skin is presented and the following nonlinear dynamic phenomena are considered: highly distorted wave forms, amplitude-dependent resonant frequencies which initially decrease and then increase with increasing amplitude of motion, magnification of substrate motion which is higher than would be expected in a similarly highly damped linear system, and classical parametric resonance instability.

Housner, J. M.↗
NASA NTRS1981

Observational data needs for plasma phenomena

Bright comets display a rich variety of interesting plasma phenomena which occur over an enormous range of spatial scales, and which require different observational techniques to be studied effectively. Wide-angle photography of high time resolution is probably the best method of studying the phenomenon of largest known scale: the plasma tail disconnection event (DE), which has been attributed to magnetic reconnection at interplanetary sector boundary crossings. These structures usually accelerate as they recede from the head region and observed velocities are typically in the range 50 V km/s. They are often visible for several days following the time of disconnection, and are sometimes seen out past 0.2 AU from the cometary head. The following areas pertaining to plasma phenomena in the ionoshere are addressed: the existence, size, and heliocentric distance variations of the contact surface, and the observational signatures of magnetic reconnection at sector boundary crossings.

Niedner, M. B., Jr.↗
NASA NTRS1983

The expansion of a plasma into a vacuum - Basic phenomena and processes and applications to space plasma physics

In this review attention is called to basic phenomena and physical processes involved in the expansion of a plasma into a vacuum, or the expansion of a plasma into a more tenuous plasma, in particular the fact that upon the expansion, ions are accelerated and reach energies well above their thermal energy. Also, in the process of the expansion a rarefaction wave propagates into the ambient plasma, an ion front moves into the expansion volume, and discontinuities in plasma parameters occur. The physical processes which cause the above phenomena are discussed, and their possible application is suggested for the case of the distribution of ions and electrons (hence plasma potential and electric fields) in the wake region behind artificial and natural obstacles moving supersonically in a rarefied space plasma. To illustrate this, some in situ results are reexamined. Directions for future work in this area via the utilization of the Space Shuttle and laboratory work are also mentioned.

Wright, K. H., Jr.↗
NASA NTRS1985

On reversion phenomena in Cu-Zr-Cr alloys

Reversion phenomena in aged Cu-0.12% Zr-0.28% Cr alloy were investigated by means of resistivity measurement and transmission electron microscopy and compared with those of Cu-0.30% Zr and Cu-0.26% Cr alloys. Specimens in the form of a 0.5 mm sheet were solution-treated at 950 F for 1 hr water-quenched, aged, and finally reversed. The reversion phenomena were confirmed to exist in Cu-Zr and Cu-Zr-Cr alloys as well as Cu-Cr alloys, at aging temperatures of 300 to 500 F. The critical aging temperature for the reversion was not observed in all the alloys. Split aging increased the amount of reversion, particularly in Cu-Zr and Cu-Zr-Cr alloys, compared with that by conventional aging. The amount of reversion in Cu-Zr-Cr alloy was greatly affected by the resolution of Cr precipitate formed by preaging. Structural changes in Cu-Zr-Cr alloy due to the reversion were hardly observed by transmission electron microscopy.

Suzuki, H.↗
NASA NTRS1985

Initial aging phenomena in copper-chromium alloys

The effects of quenching and aging temperatures on the initial aging curves of Cu-Cr alloy were examined mainly by means of electrical resistivity measurements. Three Cu-Cr alloy specimens having 0.24, 0.74, and 1.0% Cr were solution-treated at 950-1050 C, quenched into ice-water, and subsequently aged at 300-500 C. The results were as follows: (1) At the very early stage of aging (within about 30 sec), an abrupt decrease of resistivity with lowering aging tempratures. (T sub A) and rising solution temperatures (T sub S) was observed at (T sub A) up to about 400 C. In contrast, a transient increase of resistivity with rising T sub A and lowering T sub S was observed at T sub A from about 450 to 500 C. These phenomena seem to be caused by a rapid formation of solute clusters and the reversion of clusters formed during quenching, which are enhanced by quenched-in vacancies, respectively. (2) The amount of precipitation increased at the latter stage of aging with rising T sub S and T sub A as generally expected, where T sub S was not so high as to form secondary defects. (3) As a result, the initial aging phenomena in Cr-Cr alloy were revealed to be complicated against expectations. This was considered to be due to the migration energy of vacancies so larger in Cu-base.

Suzuki, H.↗
NASA NTRS1984

Ignition phenomena of bulk aluminum alloy as a function of oxygen pressure

An ignition phenomena of 6061 aluminum alloy was investigated as a function of oxygen pressure. Cylindrical aluminum alloy specimens were ignited in a pure oxygen environment by a focused CW CO2 laser beam. The experiments were conducted at oxygen pressures ranging from 0.084 to 2.413 MPa. The temperature history of the entire upper surface of the specimen and of a 0.5 mm diameter spot located initially at the center of the specimen top surface was recorded by using a commercial two-color ratio pyrometer and a fast-response, narrow-band, two-color pyrometer. Mass, brightness, and interior temperatures (for certain experiments) were also recorded throughout the experiment. The results show that the surface temperatures at ignition of the alloy obtained from the temperature curves are below the melting temperature of the aluminum oxide and are slightly dependent on oxygen pressure. The data indicate that the ignition mechanism is complex and probably composed of several phenomena acting both separately and in conjunction with each other.

Nguyen, K.↗
NASA NTRS1983

Studies in electron phenomena in MOS structures: The pulsed C-V method

The pulse hysteresis capacitance voltage (C-V) provides a straight forward technique for measuring the change of various charges in MOS structures and a tool for investigating the kinetics of various electron phenomena is developed and described. The method can be used for measuring the energy distribution and kinetics of surface states with the resolution of about 1/5 x 10 to the -9 power cm eV. Some transients in an MOS structure, particularly, the thermal generation of minority charge carriers via surface states and the relaxation of minority charge carriers supplied from the inversion layer outside the MOS structure are theoretically investigated. Analytical expressions which clearly present the physics of those electron phenomena are derived.

Kaplan, G.↗
NASA NTRS1985

Modeling of convection phenomena in Bridgman-Stockbarger crystal growth

Thermal convection phenomena in a vertically oriented Bridgman-Stockbarger apparatus were modeled by computer simulations for different gravity conditions, ranging from earth conditions to extremely low gravity, approximate space conditions. The modeling results were obtained by the application of a state-of-the art, transient, multi-dimensional, completely densimetrically coupled, discrete-element computational model which was specifically developed for the simulation of flow, temperature, and species concentration conditions in two-phase (solid-liquid) systems. The computational model was applied to the simulation of the flow and the thermal conditions associated with the convection phenomena in a modified Germanium-Silicon charge enclosed in a stationary fused-silica ampoule. The results clearly indicated that the gravitational field strength influences the characteristics of the coherent vortical flow patterns, interface shape and position, maximum melt velocity, and interfacial normal temperature gradient.

Carlson, F. M.↗
NASA NTRS1985

Anomalous cosmic ray interaction events for investigations in the SSC and Space Station era - 'Long lived she-devil phenomena'

Observational data on anomalous cosmic-ray interaction events are compiled, classified, and briefly characterized. The events are divided into three groups: those confirmed by later observation or experiment, those shown to be the result of observational or analytical error, and those still unexplained. Among the phenomena in the latter group are magnetic-monopole candidates, fractionally charged particles, massive stable particles, anomalons, proton-decay and neutron-oscillation candidates, muon bundles, narrow showers, anomalous photons, fanlike phenomena, quark-gluon-plasma candidates, and anomalous long-range delta rays.

Takahashi, Y.↗
NASA NTRS1986

A review of impulsive phase phenomena

A brief review is given of impulsive phase phenomena in support of the models used to compute the energies of the different components of the flares under study. The observational characteristics of the impulsive phase are discussed as well as the evidence for multi-thermal or non-thermal phenomena. The significance of time delays between hard X-rays and microwaves is discussed in terms of electron beams and Alfven waves, two-step acceleration, and secondary bursts at large distances from the primary source. Observations indicating the occurrence of chromospheric evaporation, coronal explosions, and thermal conduction fronts are reviewed briefly, followed by the gamma ray and neutron results. Finally, a preferred flare scenario and energy source are presented involving the interactions in a complex of magnetic loops with the consequent reconnection and electron acceleration.

Dejager, C.↗