Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phenol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Effect of post cure time and temperature on the properties of two phenolic-fiber composites

Some effects of post-cure time and temperature on the physicomechanical properties of a phenolic-asbestos and a phenolic-glass composite are studied. The molding and post-curing procedures are discussed along with physical and mechanical test results. It is found that the specific gravity of the panels tested decreased slightly but the hardness always increased with post cure, and that the mechanical properties had different patterns of response to increasing post-cure time and temperature. For tensile properties, strength decreased, modulus increased, and elongation at break exhibited little change. In general, the phenolic-asbestos showed more positive response to post cure than did the phenolic-glass. Mold venting is found to impart better properties to the composites concerned.

Lucy, M. H.↗
NASA NTRS2006

Carbon Nanotube-enhanced Carbon-phenolic Ablator Material

Phenolic impregnated carbon ablator (PICA) is a thermal protection system (TPS) material developed at NASA Ames Research Center in the mid-90 s for Discovery missions. It was used on the Stardust return capsule heat shield which successfully executed the highest speed Earth entry to date on January 15, 2006. PICA is a porous fibrous carbon insulation infiltrated with phenolic resin, and is an excellent ablator that is effective for heating rates up to 1000 W/sq cm. It is one of several candidate TPS materials for the next generation of crewed spacecraft for Lunar and Mars missions. We will describe an ongoing research effort at NASA to improve mechanical properties of the phenolic matrix with carbon nanotubes. The aim is two-fold: to increase overall TPS strength during reentry and to improve Micrometeoroid/Orbital Debris (MMOD) protection in space. The former requires at least a good dispersion of nanotubes in phenolic, while the latter also requires covalent bonding between them to couple and transfer impact energy effectively from matrix to nanotubes. We will discuss the required chemical functionalization of nanotubes, processing issues and test results.

Nikolaev, P.↗
NASA NTRS2013

Woven TPS Enabling Missions Beyond Heritage Carbon Phenolic

Woven Thermal Protection Systems (WTPS) is a new TPS concept that is funded by NASAs Office of the Chief Technologist (OCT) Game Changing Division. The WTPS project demonstrates the potential for manufacturing many TPS architectures capable of performances demanded by the many potential solar system exploration missions. Currently, missions that encounter heat fluxes in the range of 1500 4000 W/sq cm and pressures greater than 1.5 atm have very limited TPS options - only one proven material, fully dense Carbon Phenolic, is currently available for these missions. However, fully dense carbon phenolic is only mass efficient at heat fluxes greater than 4000 W/sq cm, and current mission designs suffer this mass inefficiency for lack of an alternative mid-density TPS. WTPS not only bridges this TPS gap but also offers a replacement for carbon phenolic, which itself requires a significant and costly redevelopment effort to re-establish its capability for use in the high heat flux missions recently prioritized in the NRC Decadal survey, including probe missions to Venus, Saturn and Neptune. This presentation will introduce some woven TPS architectures considered in this project and summarize some recent arc jet testing to evaluate the performance of fully dense and mid density WTPS. Performance comparisons to heritage carbon phenolic will be drawn where applicable.

Stackpoole, Mairead↗
DOE OSTI2021

Nitrogen-doped char as a catalyst for wet oxidation of phenol-contaminated water

Catalytic wet oxidation (CWO) of aqueous effluents rich in organic compounds is a very promising technology for the treatment of liquid wastes from biomass conversion processes. CWO reactions occur through the formation of free radical species, produced in the presence of an oxidant, which act on organic contaminates in the effluent. Although the reaction is well known, there exists a lack of affordable catalysts to conduct this process at the lower temperatures and pressures in novel bioenergy processes. Here, this study assessed the catalytic effect of nitrogen-doped chars as such an option. Phenol in aqueous solution was used as a model waste effluent. Treatment was conducted at moderate temperatures (190 to 260 °C), oxygen partial pressure of 1 MPa, and reaction times of 15, 30, and 45 min in stainless steel and glass-lined tube reactors. High pressure liquid chromatography (HPLC) analyses of the products quantified phenol and by-product concentrations used in the calculation of reaction activation energy. The char catalyst was studied by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) in order to gain insight into its structure and surface composition. The results indicate that nitrogen-doped char catalysts accelerate the oxidation of phenol by decreasing its reaction activation energy from 82.2 kJ/mol (non-catalyzed) to 40.4 kJ/mol (catalyzed). An analysis from first principles using density functional theory (DFT) was conducted to ascertain which N functional group has the most significant impact on free radical formation in the presence of oxygen. Among all the N functional groups studied, the dipyridinic functional groups showed the most promising characteristics to facilitate the formation of hydroxyl free radicals.

Advanced Oxidation Processes for Organic Pollutant↗
NASA NTRS2017

Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

Future NASA robotic missions utilizing an entry system into Venus and the outer planets, results in extremely high entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or AVCOAT. Previously, mission planners had to assume the use of fully dense carbon phenolic heatshields similar to what was flown on Pioneer Venus or Galileo. Carbon phenolic is a robust TPS material, however, its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer-term sustainability of CP will continue to pose challenges. NASA has decided to invest in new technology development rather than invest in reviving carbon phenolic. The HEEET project, funded by STMD is maturing a game changing Woven Thermal Protection System technology. HEEET is a capability development project and is not tied to a single mission or destination, therefore, it is challenging to complete ground testing needed to demonstrate a capability that is much broader than any single mission or destination would require. This presentation will status HEEET progress. Near term infusion target for HEEET is the upcoming New Frontiers (NF-4) class of competitively selected Science Mission Directorate (SMD) missions for which it is incentivized.

thermal protection↗
DOE OSTI2021

CO 2 Chemisorption Behavior of Coordination-Derived Phenolate Sorbents

CO 2 chemisorption via C-O bond formation is an efficient methodology in carbon capture especially using phenolate-based ionic liquids (ILs) as the sorbents to afford carbonate products. However, most of the current IL systems involve alkylphosphonium cations, leading to side reactions via the ylide intermediate pathway. It is important to figure out the CO 2 chemisorption behavior of phenolate-derived sorbents using inactive and easily accessible cation counterparts without active protons. Herein, phenolate-based systems were constructed via coordination between alkali metal cations with crown ethers to avoid the participation of active protons in CO 2 chemisorption. Reaction pathway study revealed that CO 2 uptake could be achieved by O-C bond formation to afford carbonate. CO 2 uptake capacity and reaction enthalpy were significantly influenced by the coordination effect, alkali metal types, and alkyl groups on the benzene ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quinoa protein extract: an effective alternative for the fining of wine phenolics

Abstract BACKGROUND Lately, there has been an increasing interest in using plant‐derived proteins for wine phenolic fining. Proteins extracted from cereals, potatoes, and legumes have been proposed as effective fining agents, but only those from pea, wheat, and potatoes have been approved for their use in wine. This work aimed at determining the fining ability of quinoa ( Chenopodium quinoa Willd.) protein extracts (QP), compared to commercial fining agents, on red wines. RESULTS The trials compared the performance of QP (30 and 50 g/hL), two potato protein extracts and gelatin, at two different contact times (48 and 96 h), using Petit Verdot, Malbec, and Cabernet Sauvignon wines. Turbidity, total phenolics, precipitable tannins, catechins, and color characteristics were determined. QP reduced the turbidity of all wines in a similar way to commercial fining agents. Both doses of QP significantly reduced tannins and other phenolic measures, including color intensity reductions, in a similar way to commercial fining agents. CONCLUSION QP behaved as an effective fining agent that deserves further studies in order to improve its performance and advance its characterization. © 2022 Society of Chemical Industry.

Pino‐Ramos, Liudis L.↗
DOE OSTI2024

Reductive catalytic fractionation of cotton stalks: catalytic strategy for tuning the selectivity of phenolic monomers

Pretreatment of lignocellulosic biomass is a primary step to delink lignin from the lignin-carbohydrate complex for bioethanol production and other value-added products. Presently, these processes yield lignin (technical) with significant structural changes compared to native lignin and make it difficult to valorize. Reductive catalytic fractionation (RCF) is an advanced pretreatment process to valorize native lignin to selective phenolic monomers before capitalizing on carbohydrates. Herein, cotton stalks (CS) were pretreated with ethanol: water mixture catalyzed by bimetallic, Ru-Ni/HY (RNY) and Ru-Fe/HY (RFY), and trimetallic, Ru-Fe-Ni/HY (RFNY), catalysts using the endogenously produced H 2 . The favorable catalytic properties of the RFNY catalyst, including high reducibility, acidity, metal dispersion, the synergistic effect of all the metals, and appropriate pore and particle size resulted in the highest catalytic activity. Maximum 92% delignification efficiency was achieved with 91% holocellulose retention. The extracted lignin after depolymerization in the same step produced a 19 wt.% yield of phenolic monomers. Increasing the duration of the reaction from 2 to 6 h increased the selectivity to saturated alkyl chain phenolics (1 to 16 wt.%) at the expense of hemicellulose (50 to 9%). The fate of carbohydrates left behind after the RCF (CS-RCF) process was analyzed through enzymatic saccharification and compared with raw CS and acid-pretreated CS. In conclusion, CS-RCF yielded maximum glucose yield (45 g/L) within an incubation period of 72 h.

09 BIOMASS FUELS↗
DOE OSTI2020

Oxidation of phenolic compounds during autothermal pyrolysis of lignocellulose

Fast pyrolysis is traditionally defined as the rapid decomposition of organic material in the absence of oxygen to produce primarily a liquid product known as bio-oil. However, the introduction of small amounts of oxygen to the process holds prospects of internally generating the energy needed for pyrolysis. The present study investigates the partial oxidation of lignin-derived compounds during pyrolysis, which generates both carbon oxides and aromatic carbonyl compounds. Analysis of lignin derived phenolic compounds was performed to determine if the composition had changed under oxidative conditions. NMR analyses indicates aromatic carbonyls increased under oxidative conditions, with a corresponding decrease in phenolic hydroxyl groups. Finally, model phenolic compounds were pyrolyzed to help understand the role of partial oxidation during autothermal pyrolysis of lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2022

Highly selective hydrogenation of phenol to cyclohexanone over a Pd-loaded N-doped carbon catalyst derived from chitosan

A highly stable Pd-loaded N-doped carbon catalyst (ACN pd ) for phenol hydrogenation was prepared from chitosan by hydrothermal carbonization. ACN pd does not require a reduction step before catalytic use due to the Pd in the as-prepared catalyst mainly exists in the form of Pd 0 (80%). The carbon support involves N-containing groups such as pyridinic nitrogen and pyrrolic nitrogen, which could provide basic sites to adsorb phenol effectively. The as-fabricated ACN pd shows high catalytic performance with turnover frequency (TOF) of 29.34 h -1 . Accordingly, a phenol conversion of 100% and a cyclohexanone selectivity of 99.1% are achieved in 5 h at 100 °C and 1 MPa H 2 . This outstanding performance is attributed to the synergetic effects of the Pd particles, the N-functional groups, and the Lewis acid sites on the support. The carbon support presents intrinsic Lewis acid sites due to its electrophilicity, and Pd doping further increases the strength of such acid sites as it causes electron-deficient structural features. Moreover, the Lewis acid sites inhibit the over-hydrogenation from cyclohexanone to cyclohexanol. This study provides new insights into the application of functional biomass-based carbon materials as catalyst supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photodetachment photoelectron spectroscopy shows isomer-specific proton-coupled electron transfer reactions in phenolic nitrate complexes

The oxidation of phenolic compounds is one of the most important reactions prevalent in various biological processes, often explicitly coupled with proton transfers (PTs). Quantitative descriptions and molecular-level understanding of these proton-coupled electron transfer (PCET) reactions have been challenging. This work reports a direct observation of PCET in photodetachment (PD) photoelectron spectroscopy (PES) of hydrogen-bonded phenolic (ArOH) nitrate (NO 3 - ) complexes, in which a much slower rising edge provides a spectroscopic signature to evidence PCET. Electronic structure calculations unveil the PCET processes to be isomer-specific, occurred only in those with their HOMOs localized on ArOH, leading to charge-separated transient states ArOH •+ ·NO 3 - triggered by ionizing phenols while simultaneously promoting PT from ArOH •+ to NO 3 - . Importantly, this study showcases that gas-phase PD-PES is a generic means enabling to identify PCET reactions with explicit structural and binding information.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Non-catalytic oxidative depolymerization of lignin in perfluorodecalin to produce phenolic monomers

We demonstrate for the first time non-catalytic, oxidative cracking with molecular oxygen (O 2 ) to depolymerize native lignin into oxygenated phenolic monomers. Maximum monomer yield of 10.5 wt% was achieved at 250 °C after only 10 min of reaction and included vanillin, syringaldehyde, vanillic acid, and syringic acid. High rates of oxidation are attributed to the use of perfluorodecalin as solvent. Perfluorodecalin is a perfluorocarbon (PFC), characterized by their chemical stability and exceptionally high solubility for O 2 . Monomer yields were typically five-fold higher in perfluorodecalin compared to solvents more commonly employed in lignin conversion, such as methanol, butanol, acetonitrile, and ethyl acetate. Phenolic monomer production in perfluorodecalin favors high temperatures and short reaction times to prevent further oxidation of the produced monomers. Lignin oil obtained under oxidative conditions in perfluorodecalin showed lower molecular weight and smaller polydispersity compared to other solvents. Increasing the reaction time further decreased the molecular weight, while increasing reaction time in an inert atmosphere increased the molecular weight of the lignin oil. High concentrations of O 2 in perfluorodecalin not only increased lignin depolymerization but suppressed undesirable condensation reactions. Depolymerization is likely initiated by thermally induced homolytic cleavage of ether linkages in lignin to form phenoxy and carbon-based radicals. These radicals bind with O 2 as a radical scavenger and further react to form phenolic monomeric products rather than repolymerizing to large oligomers. The PFC process was scaled from 5 mL to 250 mL without any loss of yield. Because most organic compounds are not soluble in perfluorodecalin, recycling is easily achieved via liquid–liquid separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Shock-induced chemistry and high strain-rate viscoelastic behavior of a phenolic polymer

We use impact experiments and a finite element model (up to 1.2 GPa), and molecular dynamics simulations (up to 60 GPa), to examine the behavior of a phenolic polymer under shock compression, spanning both nonreactive and reactive regimes. In the nonreactive regime, relaxation following compression at strain rates of ∼105 s−1 can be explained by viscoelasticity observed at ordinary laboratory rates (≲1 s−1) by accounting for the temperature dependence of the phenolic β-transition. Reasonable agreement is found between the measured shock Hugoniot up to 1.2 GPa and molecular dynamics simulation for cross-linked structures of comparable density. We also observed a first-order mechanical transition near 0.36 GPa shock stress and estimated a spall strength of 0.102 GPa and Hugoniot elastic limit of 1–2 GPa. The shock stress is found to vary up to 24% among phenolics made with different resin and/or cure processes. Finally, molecular dynamics simulations are used to identify a reactive regime at shock pressures ≳20 GPa that is characterized by chemically driven, rate-dependent relaxation processes, including dehydrogenation and dehydration reactions that promote the formation of a dense, highly cross-linked carbonaceous solid and the release of light volatiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tissue-preferential recruitment of electron transfer chains for cytochrome P450-catalyzed phenolic biosynthesis

Cytochrome P450 system consists of P450 monooxygenase and redox pattern(s). While the importance of monooxygenases in plant metabolism is well documented, the metabolic roles of the related redox components have been largely overlooked. Here, we show that distinct electron transfer chains are recruited in phenylpropanoid-monolignol P450 systems to support the synthesis of different classes of phenolics in different plant tissues. While Arabidopsis cinnamate 4-hydroxylase adopts conventional NADPH-cytochrome P450 oxidoreductase (CPR) electron transfer chain for its para-hydroxylation, ferulate 5-hydroxylase employs both NADPH-CPR cytochrome b 5 (CB5) and NADH-cytochrome b 5 reductase (CBR)-CB5 chains to support benzene ring 5-hydroxylation. Moreover, the former route is primarily recruited in the stem for syringyl lignin synthesis, while the latter dominates in the syntheses of 5-hydroxylated phenolics in seeds and seed coat suberin. The availability of reductants NADPH and NADH and the catalytic properties of both reductases to CB5 contribute to the tissue-preferential recruitment of electron transfer systems. Our study unveils an additional layer of complexity and versatility of P450 system that the higher plants evolved for diversifying phenolic repertoires.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Bacteria isolated from the grape phyllosphere capable of degrading guaiacol, a main volatile phenol associated with smoke taint in wine

Recent wildfires near vineyards in the Pacific United States have caused devastating financial losses due to smoke taint in wine. When wine grapes (Vitis vinifera) are exposed to wildfire smoke, their berries absorb volatile phenols derived from the lignin of burning plant material. Volatile phenols are released during the winemaking process giving the finished wine an unpleasant, smokey, and ashy taste known as smoke taint. Bacteria are capable of undergoing a wide variety of metabolic processes and therefore present great potential for bioremediation applications in many industries. In this study, we identify two strains of the same species that colonize the grape phyllosphere and are able to degrade guaiacol, a main volatile phenol responsible for smoke taint in wine. We identify the suite of genes that enable guaiacol degradation in Gordonia alkanivorans via RNAseq of cells growing on guaiacol as a sole carbon source. Additionally, we knockout guaA, a cytochrome P450 gene involved in the conversion of guaiacol to catechol; ΔguaA cells cannot catabolize guaiacol in vitro, providing evidence that GuaA is necessary for this process. Furthermore, we analyze the microbiome of berries and leaves exposed to smoke in the vineyard to investigate the impact of smoke on the grape microbial community. We found smoke has a significant but small effect on the microbial community, leading to an enrichment of several genera belonging to the Bacilli class. Collectively, this research shows that studying microbes and their enzymes has the potential to identify novel tools for alleviating smoke taint.

Castro, Claudia [United States Department of Agric↗
DOE OSTI2023

Wounding rapidly alters transcription factor expression, hormonal signaling, and phenolic compound metabolism in harvested sugarbeet roots

Injuries sustained by sugarbeet (Beta vulgaris L.) roots during harvest and postharvest operations seriously reduce the yield of white sugar produced from stored roots. Although wound healing is critically important to reduce losses, knowledge of these processes is limited for this crop as well as for roots in other species. To better understand the metabolic signals and changes that occur in wounded roots, dynamic changes in gene expression were determined by RNA sequencing and the activity of products from key genes identified in this analysis were determined in the 0.25 to 24 h following injury. Nearly five thousand differentially expressed genes that contribute to a wide range of cellular and molecular functions were identified in wounded roots. Highly upregulated genes included transcription factor genes, as well as genes involved in ethylene and jasmonic acid (JA) biosynthesis and signaling and phenolic compound biosynthesis and polymerization. Enzyme activities for key genes in ethylene and phenolic compound biosynthesis and polymerization also increased due to wounding. Results indicate that wounding causes a major reallocation of metabolism in sugarbeet taproots. Although both ethylene and JA are likely involved in triggering wound responses, the greater and more sustained upregulation of ethylene biosynthesis and signaling genes relative to those of JA, suggest a preeminence of ethylene signaling in wounded sugarbeet roots. Changes in gene expression and enzymes involved in phenolic compound metabolism additionally indicate that barriers synthesized to seal off wounds, such as suberin or lignin, are initiated within the first 24 h after injury.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Photoaging of phenolic secondary organic aerosol in the aqueous phase: evolution of chemical and optical properties and effects of oxidants

Abstract. While gas-phase reactions are well established to have significant impacts on the mass concentration, chemical composition, and optical properties of secondary organic aerosol (SOA), the aqueous-phase aging of SOA remains poorly understood. In this study, we performed a series of long-duration photochemical aging experiments to investigate the evolution of the composition and light absorption of the aqueous SOA (aqSOA) from guaiacyl acetone (GA), a semivolatile phenolic carbonyl that is common in biomass burning smoke. The aqSOA was produced from reactions of GA with hydroxyl radical (•OH-aqSOA) or a triplet excited state of organic carbon (3C∗-aqSOA) and was then photoaged in water under conditions that simulate sunlight exposure in northern California for up to 48 h. The effects of increasing aqueous-phase •OH or 3C∗ concentration on the photoaging of the aqSOA were also studied. High-resolution aerosol mass spectrometry (HR-AMS) and UV–Vis spectroscopy were utilized to characterize the composition and the light absorptivity of the aqSOA and to track their changes during aging. Compared to •OH-aqSOA, the 3C∗-aqSOA is produced more rapidly and shows less oxidation, a greater abundance of oligomers, and higher light absorption. Prolonged photoaging promotes fragmentation and the formation of more volatile and less light-absorbing products. More than half of the initial aqSOA mass is lost, and substantial photobleaching occurs after 10.5 h of prolonged aging under simulated sunlight illumination for 3C∗-aqSOA and 48 h for •OH-aqSOA. By performing positive matrix factorization (PMF) analysis of the combined HR-AMS and UV–Vis spectral data, we resolved three generations of aqSOA with distinctly different chemical and optical properties. The first-generation aqSOA shows significant oligomer formation and enhanced light absorption at 340–400 nm. The second-generation aqSOA is enriched in functionalized GA species and has the highest mass absorption coefficients in 300–500 nm, while the third-generation aqSOA contains more fragmented products and is the least light absorbing. These results suggest that intermediately aged phenolic aqSOA is more light absorbing than other generations, and that the light absorptivity of phenolic aqSOA results from a competition between brown carbon (BrC) formation and photobleaching, which is dependent on aging time. Although photoaging generally increases the oxidation of aqSOA, a slightly decreased O/C of the •OH-aqSOA is observed after 48 h of prolonged photoaging with additional •OH exposure. This is likely due to greater fragmentation and evaporation of highly oxidized compounds. Increased oxidant concentration accelerates the transformation of aqSOA and promotes the decay of BrC chromophores, leading to faster mass reduction and photobleaching. In addition, compared with •OH, photoaging by 3C∗ produces more low-volatility functionalized products, which counterbalances part of the aqSOA mass loss due to fragmentation and evaporation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1974

Effect of volatile removal during molding on the properties of two phenolic-fiber composites

A comparison has been made of the effect of three volatile-removing techniques during molding on the properties of phenolic-fiber composites. The first technique involved heating the molding compound from one side, initiating the volatile-producing reactions, and driving these volatiles through the compound toward the cooler side. The second technique involved the application of a vacuum to the molding cavity before and during the cure cycle. The third technique was a combination of the first two. These techniques were used in the compression molding of phenolic-asbestos and phenolic-glass composites. The effects of both the individual and combined techniques on the mechanical, thermal, and sorption properties of the composites are reported.

Price, H. L.↗