Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase field model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Phase-field modeling of radiation-induced segregation for multicomponent alloys

Structural alloys under irradiation are known to undergo radiation-induced solute redistribution (RIS) at grain boundaries, leading to detrimental effects such as intergranular corrosion and stress-assisted cracking. To better understand the phenomenon, improved models of RIS applicable to concentrated, multicomponent alloys, and mesoscale microstructures are needed. In this talk, we present a novel grand-potential-based phase-field model to account for the complete set of multicomponent kinetic and thermodynamic couplings between atoms and point defects in the Onsager transport equations. We demonstrate multiscale modeling capability by deriving the Onsager coefficient matrix from atomistic-based Kinetic Monte Carlo simulations. Model predictions and validations of RIS and the effect of defect production, grain boundary sink strength and density are demonstrated for a model FCC FeCrNi system. We also demonstrate the novel capability to describe RIS in the presence of equilibrium segregation described using a density-based CALPHAD thermodynamic framework. This modeling approach overcomes certain limitations in conventional RIS models and provides a step closer towards multiscale modeling.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Phase-field modeling of diffusion bonding in 316H stainless steel: Impact of processing conditions on grain morphology and bonding quality

A novel multi-phase, multi-component phase‐field model is presented to study the diffusion bonding of 316H stainless steel. Combined with targeted experimental investigations, this model simulates the bond-growth process and predicts the bonding quality. Unlike previous models, our approach captures the simultaneous evolution of voids and grain structures, while quantifying bonding quality using defined bonding ratio. A comprehensive analysis of bond process control is performed by changing temperature, pressure and surface roughness observing the resulting bond structure, which is consistent with experimental observations and analytical predictions. Temperature is determined to be the dominant factor, with the transition from a flat to a robust bond occurring between 1000 °C and 1050 °C. At the ideal bonding temperature of 1050 °C, a surface roughness exceeding 0.6 μm or an applied stress below 4 MPa results in poor bonding quality. Beyond this, higher pressures and smoother surfaces reduce void size, accelerate void shrinkage, and lead to improved bond integrity. This diffuse-interface model can be extended to other material systems if supplied with appropriate thermodynamic and kinetic data. In conclusion, this makes it an effective modeling platform for optimizing high-temperature diffusion bonding and developing reliable bonded components such as compact heat exchangers.

Diffusion bonding↗
DOE OSTI2024

Phase-field modeling of crack growth under coupled creep-fatigue

Crack growth under coupled creep-fatigue strongly influences service life of metallic components operating at high temperatures. However, there lack numerical models that enable direct simulations of crack growth and plasticity development under coupled creep-fatigue. Here, in this study, a unified phase-field model is developed for simulating crack growth under fatigue, creep, and coupled creep-fatigue. This model is able to reproduce the Paris laws for both brittle and ductile materials in pure fatigue mode, which shows that the degradation rate due to cyclic stress in ductile materials is generally larger than that in brittle materials. Fatigue simulations with different yield strengths demonstrate that plasticity facilitates crack growth in typical ductile materials. High-throughput simulations are performed under coupled creep-fatigue conditions, with varying hold-stress levels and hold-time. By analyzing crack growth rate under different hold-time, a creep-fatigue interaction term is obtained. Simulation results demonstrate that the creep-fatigue interaction is caused by smaller stress gradient and enhanced degradation rate ahead of the crack tips under coupled creep-fatigue, compared to the situation of pure fatigue. This work reveals the origin of different Paris-law exponents in brittle and ductile materials and demonstrates how the interplay between creep and fatigue affects crack growth.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A phase-field model of quasi-brittle fracture for pressurized cracks: Application to UO 2 high-burnup microstructure fragmentation

Here, in this paper, we present a phase-field model of quasi-brittle fracture with pressurized cracks, with dedicated applications for polycrystalline materials. The model is formulated as a minimization problem within the variational framework. The external work done by pressure on the crack surfaces is included in the objective function. Several careful modeling choices lead to a regularization-length-independent critical strength. The model is constructed to give a softening response with an underlying linear traction-separation law. The pressure-dependent softening response and the regularization of the prescribed pressure are demonstrated with a (quasi) one-dimensional numerical analysis. In a two-dimensional numerical analysis under plane strain assumptions, the critical stress corresponding to crack propagation (as predicted by our quasi-brittle fracture model) is compared with linear elastic fracture mechanics (LEFM) analytical solutions. Our model is further utilized to simulate fission-gas-induced fragmentation of the UO 2 high-burnup structure (HBS). Simulation results show that pressurized bubbles can cause crack nucleation and propagation, and that the bubble size and the surrounding external pressure affect the critical pressure corresponding to crack nucleation. Simulations of a partial HBS at different recrystallization stages show that different grain structures (due to recrystallization) also influence crack paths and fragmentation morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Phase field modeling of hydrogen release in nitrile-butadiene rubber composites after high-pressure hydrogen exposure

Experimental data showed that a simple diffusion model doesn’t suffice to explain the hydrogen (H 2 ) release kinetics in nitrile butadiene rubber (NBR) composites (one with no filler or plasticizer, one with plasticizer only, one with fillers and plasticizer, and one with fillers only) after exposed to hydrogen gas at a pressure of 27.6 MPa. In this work, we developed a phase field model that considers the effect of H 2 gas bubble evolution on H 2 release kinetics. With the model, we simulated the effect of thermodynamic and kinetics properties on the nucleation, growth, and shrinkage of gas bubbles and H 2 release kinetics during and after decompression. Here, the results demonstrated that 1) the model built upon certain thermodynamic and kinetics properties of a given material can well describe its H 2 release kinetics measured in experiments, and 2) the model can predict the gas bubble evolution, which is associated with the material property degradation and failures, with accurate thermodynamic and kinetics properties or H 2 release data from experiments.

08 HYDROGEN↗
DOE OSTI2024

Phase-field modeling for restructuring in the dark zone of high burnup UO 2

This report summarizes the mesoscale modeling work performed in fiscal year 2024 under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to capture the microstructural evolution and restructuring observed in the dark regions of high burnup UO 2 nuclear fuel. This is the first attempt to realistically simulate the restructuring behavior observed in different region of a high burnup fuel. We employ a grand-potential based phase-field model to concurrently evaluate the formation of subgrains and growth of fission bubbles within the fuel. A energy-based subgrain formation criteria is introduced to simulate the restructuring process. Effect of different initial conditions and different modeling parameters are studies systematically to capture how each of these parameters influence the characteristics of the restructured fuel. It is observed that the subgrain formation begins around existing fission gas bubbles and then proceeds towards triple junctions, grain boundaries and grain interiors. It is demonstrated that restructuring is influenced by a combination of initial dislocation densities, subgrain formation rate, and temperature. Rate of restructuring increases with increase in fuel temperature. A restructuring bias is observed within the microstructure due to variation in defect accumulation among different grains. Furthermore, bubble sizes and distribution does not have a significant effect on rate of restructuring. The predicted microstructures resembles the characteristics of the restructured regions as observed in experiments. Finally, a correlation is presented that demonstrates the evolution of the restructuring volume fraction as a function of local effective burnup. This work provides a first of its kind restructuring model for darkzone that can be used by BISON for performance prediction of high burnup UO 2 fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Phase-field modeling of thermally-grown oxide and damage evolution in environmental barrier coatings

Silicon carbide-based ceramic matrix composites protected by environmental barrier coatings (EBCs) present a promising materials solution for next-generation gas turbines. Developing more robust and efficient EBCs is therefore of significant technological importance. During the service in high-temperature oxidative environments, there is a thermally grown oxide (TGO) layer, spontaneously formed in the EBC system. TGO is recognized as a critical factor for the degradation and failure of EBCs, yet the detailed mechanisms of TGO growth and its effect on EBC failure remain unclear. In this study we develop a comprehensive chemo-mechano-phase-field model to simulate growth of the TGO in EBCs, factoring in creep and deformation, and especially the cracking behaviors. The volume expansion due to TGO growth and the resulting large inelastic deformation are addressed by using our recently developed, so-called incremental realization of inelastic deformation (IRID) algorithm, in combination with an adapted Hu-Chen spectral solver for elasticity. Simulations of TGO growth are performed considering different growth modes of TGOs determined mainly by the ratio of oxidant permeability in the topcoat to that in the TGO itself. Large-scale three-dimensional (3D) simulations are performed to model the formation of interconnecting vertical/channel cracks (often called ‘mud cracks’). The simulated crack morphology are in excellent agreement with the experimental observations from the literature. The simulations also provide insights into the cracking of EBCs and its dependence on the structure and constituent properties of the coating system. Furthermore, these results demonstrate the developed damage model can be a useful tool for design of more durable EBCs.

Cracking↗
DOE OSTI2022

Phase field modeling of dislocations and obstacles in InSb

We present a phase-field dislocation dynamics (PFDD) model informed by first-principle calculations to elucidate the competitive dislocation nucleation and propagation between the glide and shuffle sets in InSb diamond cubic crystal. The calculations are directly informed with generalized stacking fault energy curves on the (111) slip plane for both the “glide set,” with the smaller interplanar spacing, and the “shuffle set,” with the larger interplanar spacing. The formulation also includes elastic anisotropy and the gradient term associated with the dislocation core. The PFDD calculations show that under no stress the equilibrium structure of screw glide set dislocations dissociates into Shockley partials, while those of the shuffle set dislocations do not dissociate, remaining compact. The calculated dislocation core widths of these InSb dislocations agree well with the measured values for other semiconductor materials, such as Si and GaN. We find that a shuffle set dislocation emits from a dislocation source at an applied stress about three times smaller than that needed to emit leading and trailing partials successively on the glide set plane. Once the partial dislocations in the glide set are emitted, they propagate faster than the shuffle set perfect dislocation at the same stress level.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phase-field modeling of alloy oxidation at high temperatures

Oxide growth is a complex process involving transport of reactive species, heterogeneous reactions, and microstructure evolution. Predicting oxidation kinetics and especially the oxide morphological change has been a long-standing challenge. Here we develop a phase-field model for predicting the oxide growth kinetics of a multicomponent alloy during high temperature oxidation, focusing on internal oxidation (non-protective) and its transition to external oxidation (protective). In this work, the predicted kinetics and oxide morphology are analyzed and compared to the classical Wagner’s theory and an existing analytical model by Zhao and Gleeson. Some assumptions used in the analytical models and the limitation are discussed. In addition, it is demonstrated that the morphology and distribution of the initial oxide nuclei play an important role in the later stage oxide connectivity and thus the transition to external oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phase Field Modeling of Corrosion for Design of Next-Generation Magnesium-Aluminum Vehicle Joints

In this study, WPI and its partners sought to understand galvanic corrosion in Mg-Al friction stir weld (FSW) joints. Unlike fusion welds, FSW is done in the solid state. This limits (but does not eliminate) the formation of brittle Al-Mg intermetallics, resulting in better joint strength and corrosion resistance. This study aimed to understand corrosion behavior of Mg-Al FSW joints by using a Cahn-Hilliard phase field electrochemistry model based on the work of Pongsaksawad et al. Its context challenge problem was an ultra-light door designed by Magna with 6061-Al sheet outer and ZEK100-Mg sheet inner panels, joined by an adhesive and FSW. Unlike most FSW joints, which weld through the softer material into the harder one, the Al sheet’s hem joint around Mg required the FSW tool to through the harder Al into the softer Mg, which was itself a challenge. Despite this challenge, PNNL succeeded in consistently making very strong FSW lap joints, by using a triflute tool and power control. Characterization showed mostly separate Al and Mg regions in the weld, usually with a hook protruding from Al into Mg, which likely contributed to high joint strength. Nanohardness mapping showed higher hardness in thin Mg swirls into the Al nugget, likely due to the intermetallics. The study used the industry standard SAE J2334 Cyclic Corrosion Test (CCT) to simulate corrosion conditions over the life of a vehicle, as well as linear polarization testing and ASTM G71 pitting corrosion testing. Corrosion reactions were: H 2 O + ½O 2 + 2e - → 2OH - at the Al cathode, and either Mg → Mg 2+ + 2e - or Mg + 2OH - → Mg(OH) 2 + 2e - at the Mg anode, with electron transfer through the joint. Mass loss increased with Al section length, supporting the hypothesis that galvanic corrosion in Al-Mg joints is limited by the cathodic reaction. Both pitting corrosion (first anode reaction) and hydroxide film formation (second reaction) were observed. The J2334 CCT test method was slightly modified, adding a chromium solution cleaning step after each week of corrosion testing, in order to remove Mg oxides and hydroxides and accurately measure mass loss over time. That said, FSW joints treated in this way did not did not exhibit significant reduction in lap shear strength of the joints vs. newly welded samples which had not undergone corrosion. Corrosion appeared to consist mainly of pitting in Mg in a way which did not directly affect the bond between the materials where the joints failed. A Cahn-Hilliard phase field model coupled with electrical potential described the electronically mediated galvanic corrosion electrochemical reactions described above in the four-component Al-Mg-H 2 O-(H 2 O+½O 2 ) system. This 2-D model successfully predicted Mg(OH)₂ formation at the anode in some circumstances, and Mg pitting corrosion in others, and showed the correct electric field directions in both cases. The model predicted Mg pit corrosion depth within a factor of two of measured pits.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Phase-Field Modeling of Thermally-Grown Oxide and the Induced Damage Evolution in Environmental Barrier Coatings

The advent of next-generation hydrogen-based engines necessitates materials capable of withstanding temperatures beyond the reach of current superalloys. SiC-based ceramic matrix composites, augmented with environmental barrier coatings (EBCs), present a promising materials solution. Given the active search for effective and durable EBCs, there is a pressing need for modeling tools to understand and predict damage evolution in these materials to help accelerate their development. This study introduces a phase-field model (PFM) designed to simulate the critical role of thermally grown oxides (TGO) in the degradation and failure of EBCs. The model accounts for the severe volume expansion due to oxidation, alongside phase transformations and microstructural evolution during thermal cycling, offering a comprehensive view of the damage processes. Simulation results are validated against experimental findings reported in the literature, establishing the model's potential as a significant tool for understanding and improving the resilience of EBCs in cyclic oxidative environments.

Cheng, Tianle↗
DOE OSTI2021

Kinetics of solid–liquid interface motion in molecular dynamics and phase-field models: crystallization of chromium and silicon

The results of molecular dynamics (MD) simulations of the crystallization process in one-component materials and solid solution alloys reveal a complex temperature dependence of the velocity of the crystal–liquid interface featuring an increase up to a maximum at 10–30% undercooling below the equilibrium melting temperature followed by a gradual decrease of the velocity at deeper levels of undercooling. At the qualitative level, such non-monotonous behaviour of the crystallization front velocity is consistent with the diffusion-controlled crystallization process described by the Wilson–Frenkel model, where the almost linear increase of the interface velocity in the vicinity of melting temperature is defined by the growth of the thermodynamic driving force for the phase transformation, while the decrease in atomic mobility with further increase of the undercooling drives the velocity through the maximum and into a gradual decrease at lower temperatures. At the quantitative level, however, the diffusional model fails to describe the results of MD simulations in the whole range of temperatures with a single set of parameters for some of the model materials. The limited ability of the existing theoretical models to adequately describe the MD results is illustrated in the present work for two materials, chromium and silicon. It is also demonstrated that the MD results can be well described by the solution following from the hodograph equation, previously found from the kinetic phase-field model (kinetic PFM) in the sharp interface limit. The ability of the hodograph equation to describe the predictions of MD simulation in the whole range of temperatures is related to the introduction of slow (phase field) and fast (gradient flow) variables into the original kinetic PFM from which the hodograph equation is obtained. The slow phase-field variable is responsible for the description of data at small undercoolings and the fast gradient flow variable accounts for local non-equilibrium effects at high undercoolings. The introduction of these two types of variables makes the solution of the hodograph equation sufficiently flexible for a reliable description of all nonlinearities of the kinetic curves predicted in MD simulations of Cr and Si. This article is part of the theme issue ‘Transport phenomena in complex systems (part 1)’.

Science & Technology - Other Topics↗
DOE OSTI2021

Wide-blocky veins explained by dependency of crystal growth rate on fracture surface type: Insights from phase-field modeling

Vein microstructures contain a wealth of information on coupled chemical and mechanical processes of fracturing, fluid transport, and crystal growth. Numerical simulations have been used for exploring the factors controlling the development of vein microstructures; however, they have not been quantitatively validated against natural veins. Here we combined phase-field modeling with microtextural analysis of previously unexplained wide-blocky calcite veins in natural limestone and of the fresh fracture surface in this limestone. Results show that the wide-blocky vein textures can only be reproduced if ~10%–20% of crystals grow faster than the rest. This fraction corresponds to the amount of transgranularly broken grains that were observed on the experimental fracture surfaces, which are dominantly intergranular. We hypothesize that transgranular fractures allow faster growth of vein minerals due to the lack of clay coatings and other nucleation discontinuities that are common along intergranular cracks. Our simulation results show remarkable similarity to the natural veins and reproduce the nonlinear relationship between vein crystal width and vein aperture. This allows accurate simulations of crystal growth processes and related permeability evolution in fractured rocks.

Geology↗
DOE OSTI2025

Thermo-Mechanical Phase-Field Modeling of Fracture in High-Burnup UO2 Fuels Under Transient Conditions

This study presents a novel multiphysics phase-field fracture model to analyze high-burnup uranium dioxide (UO2) fuel behavior under transient reactor conditions. Fracture is treated as a stochastic phase transition, which inherently accounts for the random microstructural effects that lead to variations in the value of fracture strength. Moreover, the model takes into consideration the effects of temperature and burnup on thermal conductivity. Therefore, the model is able to predict crack initiation, propagation, and complex morphologies in response to thermal gradients and stress distributions. Several simulations were conducted to investigate the effects of operational and transient conditions on fracture behavior and the resulting cracking patterns. High-burnup fuels exhibit reduced thermal conductivity, elevating temperature gradients and resulting in extensive radial and circumferential cracks. Transient heating rates and temperatures significantly affect fracture patterns, with higher heating rates generating steeper gradients and more irregular crack trajectories. This approach provides critical insights into fuel integrity during accident scenarios and supports the safety evaluation of extended burnup limits.

Chemistry↗
DOE OSTI2022

Phase-field modeling of crack growth and mitigation in solid oxide cells

Fracture and crack growth is one of the main degradation mechanisms in solid oxide cells (SOCs). However, the modeling of crack growth in SOCs is challenging due to their complex microstructures and possible plasticity development within the Ni particles in Ni-based SOC electrodes. In this study, a phase-field fracture model is developed, which incorporates the SOC microstructures and phase-dependent material properties, including yield strength, fracture toughness in the bulk and at the interphase boundaries. The model is employed to study crack initiation and growth under thermal and redox cycling on the hydrogen electrode side of SOCs. The simulation results demonstrate that under thermal cycling, work-zone cracking dominates in electrolyte-supported SOCs with cracks initiated at the triple-phase boundaries, while only minor mechanical degradation occurs in hydrogen-electrode-supported SOCs after hundreds of thermal cycles. Under redox cycling, through-cracking of yttria-stabilized zirconia (YSZ) in the hydrogen electrode and electrolyte layers dominates. Finally, the simulation results suggest several crack-mitigation strategies, including decreasing the porosity in the hydrogen electrode support layer and synchronizing thermal strain to balance oxidation strain.

08 HYDROGEN↗
DOE OSTI2021

A multi-phase-field model of topological pattern formation during electrochemical dealloying of binary alloys

Porous metal structures produced by electrochemical dealloying have been extensively studied for use in various applications that require high surface areas. A new comprehensive multi-phase-field (MPF) model is proposed to study topological porous patterns formed by spontaneously etching a bulk binary alloy that involves electrochemical reactions, bulk and surface diffusion, ion transport, applied electrode potential, and charge conservation. The governing equations for the alloy-porous cluster-electrolyte system account for a generalized Butler-Volmer electrochemical reaction and are in accordance with the classical nucleation theory. Based on a quantitative examination of the effects of electrode potential and precursor composition, the simulation results reproduce typical phenomena including passive surface dealloying, active porosity evolution, critical potential, and characteristic length scale in two-dimension (2-D) and three-dimension (3-D). To consider more complicated dealloying systems, the evolutions of a bimodal porous metal structure, nanocomposite, and nested porous network with a structured hierarchy are investigated. Finally, the proposed model can be a useful tool for understanding and predicting the morphology evolution of diverse porous structures during electrochemical dealloying.

Hierarchical porous structure↗
DOE OSTI2024

Phase-field modeling of stored-energy-driven grain growth with intra-granular variation in dislocation density

Abstract We present a phase-field (PF) model to simulate the microstructure evolution occurring in polycrystalline materials with a variation in the intra-granular dislocation density. The model accounts for two mechanisms that lead to the grain boundary migration: the driving force due to capillarity and that due to the stored energy arising from a spatially varying dislocation density. In addition to the order parameters that distinguish regions occupied by different grains, we introduce dislocation density fields that describe spatial variation of the dislocation density. We assume that the dislocation density decays as a function of the distance the grain boundary has migrated. To demonstrate and parameterize the model, we simulate microstructure evolution in two dimensions, for which the initial microstructure is based on real-time experimental data. Additionally, we applied the model to study the effect of a cyclic heat treatment (CHT) on the microstructure evolution. Specifically, we simulated stored-energy-driven grain growth during three thermal cycles, as well as grain growth without stored energy that serves as a baseline for comparison. We showed that the microstructure evolution proceeded much faster when the stored energy was considered. A non-self-similar evolution was observed in this case, while a nearly self-similar evolution was found when the microstructure evolution is driven solely by capillarity. These results suggest a possible mechanism for the initiation of abnormal grain growth during CHT. Finally, we demonstrate an integrated experimental-computational workflow that utilizes the experimental measurements to inform the PF model and its parameterization, which provides a foundation for the development of future simulation tools capable of quantitative prediction of microstructure evolution during non-isothermal heat treatment.

Materials Science↗
DOE OSTI2024

Crack opening calculation in phase-field modeling of fluid-filled fracture: A robust and efficient strain-based method

The phase-field method has become popular for the numerical modeling of fluid-filled fractures, thanks to its ability to represent complex fracture geometry without algorithms. However, the algorithm-free representation of fracture geometry poses a significant challenge in calculating the crack opening (aperture) of phase-field fracture, which governs the fracture permeability and hence the overall hydromechanical behavior. Although several approaches have been devised to compute the crack opening of phase-field fracture, they require a sophisticated algorithm for post-processing the phase-field values or an additional parameter sensitive to the element size and alignment. Here, we develop a novel method for calculating the crack opening of fluid-filled phase-field fracture, which enables one to obtain the crack opening without additional algorithms or parameters. Here we transform the displacement-jump-based kinematics of a fracture into a continuous strain-based version, insert it into a force balance equation on the fracture, and apply the phase-field approximation. Through this procedure, we obtain a simple equation for the crack opening which can be calculated with quantities at individual material points. We verify the proposed method with analytical and numerical solutions obtained based on discrete representations of fractures, demonstrating its capability to calculate the crack opening regardless of the element size or alignment.

58 GEOSCIENCES↗