Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Spitzer Phase Curves of KELT-1b and the Signatures of Nightside Clouds in Thermal Phase Observations

We observed two full orbital phase curves of the transiting brown dwarf KELT-1b, at 3.6 and 4.5μm, using the Spitzer Space Telescope. Combined with previous eclipse data from Beatty et al., we strongly detect KELT-1b’s phase variation as a single sinusoid in both bands, with amplitudes of 964±36 ppm at 3.6μm and 979±54 ppm at 4.5μm, and confirm the secondary eclipse depths measured by Beatty et al. We also measure noticeable eastward hotspot offsets of 28°.4±3°.5 at 3.6μm and 18°.6±5°.2 at 4.5μm. Both the day–night temperature contrasts and the hotspot offsets we measure are in line with the trends seen in hot Jupiters, though we disagree with the recent suggestion of an offset trend by Zhang et al. Using an ensemble analysis of Spitzer phase curves, we argue that nightside clouds are playing a noticeable role in modulating the thermal emission from these objects, based on:(1)the lack of a clear trend in phase offsets with equilibrium temperature,(2)the sharp day–night transitions required to have non-negative intensity maps, which also resolves the inversion issues raised by Keating& Cowan,(3)the fact that all the nightsides of these objects appear to be at roughly the same temperature of1000 K, while the dayside temperatures increase linearly with equilibrium temperature, and(4)the trajectories of these objects on a Spitzer color–magnitude diagram, which suggest colors only explainable via nightside clouds.

Hot Jupitors↗
NASA NTRS2015

An Overview of 2014 SBIR Phase 1 and Phase 2 Air-Breathing Propulsion

NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights nine of the innovative SBIR 2014 Phase I and Phase II projects that emphasize one of NASA Glenn Research Center's six core competencies-Air-Breathing Propulsion. The technologies cover a wide spectrum of applications such as development of X-ray computed tomography (CT) imaging method for the measurement of complex 3D ice shapes, phased array techniques for low signal-to-noise ratio wind tunnels, compact kinetic mechanisms for petroleum-derived and alternative aviation fuels, and hybrid electric propulsion systems for a multirotor aircraft. Each featured technology describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report provides as an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

phased array technique for wind tunnels↗
NASA NTRS2015

An Overview of 2014 SBIR Phase 1 and Phase 2 Communications Technology and Development

NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights eight of the innovative SBIR 2014 Phase I and Phase II projects that emphasize one of NASA Glenn Research Center's six core competencies-Communication Technology and Development. The technologies cover a wide spectrum of applications such as X-ray navigation, microsensor instrument for unmanned aerial vehicle airborne atmospheric measurements, 16-element graphene-based phased array antenna system, interferometric star tracker, ultralow power fast-response sensor, and integrated spacecraft navigation and communication. Each featured technology describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report provides an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

ultralow power fast-response sensor↗
NASA NTRS1971

Space station MSFC-DPD-235/DR no. MA-05 phase C/D program development plan. Volume 2: Phase C/D, programmatic requirements

The design plan requirements define the design implementation and control requirements for Phase C/D of the Modular Space Station Project and specifically address the Initial Space Station phase of the Space Station Program (modular). It is based primarily on the specific objective of translating the requirements of the Space Station Program, Project, Interface, and Support Requirements and preliminary contract end x item specifications into detail design of the operational systems which comprise the initial space station. This document is designed to guide aerospace contractors in the planning and bidding for Phase C/D.

Source record↗
NASA NTRS1972

Phased array antenna matching: Simulation and optimization of a planar phased array of circular waveguide elements

A computerized simulation of a planar phased array of circular waveguide elements is reported using mutual coupling and wide angle impedance matching in phased arrays. Special emphasis is given to circular polarization. The aforementioned computer program has as variable inputs: frequency, polarization, grid geometry, element size, dielectric waveguide fill, dielectric plugs in the waveguide for impedance matching, and dielectric sheets covering the array surface for the purpose of wide angle impedance matching. Parameter combinations are found which produce reflection peaks interior to grating lobes, while dielectric cover sheets are successfully employed to extend the usable scan range of a phased array. The most exciting results came from the application of computer aided optimization techniques to the design of this type of array.

Dudgeon, J. E.↗
NASA NTRS1973

Phase control circuits using frequency multiplications for phased array antennas

A phase control coupling circuit for use with a phased array antenna is described. The coupling circuit includes a combining circuit which is coupled to a transmission line, a frequency multiplier circuit which is coupled to the combining circuit, and a recombining circuit which is coupled between the frequency multiplier circuit and phased array antenna elements. In a doubler embodiment, the frequency multiplier circuit comprises frequency doublers and the combining and recombining circuits comprise four-port hybrid power dividers. In a generalized embodiment, the multiplier circuit comprises frequency multiplier elements which multiply to the Nth power, the combining circuit comprises four-part hybrid power dividers, and the recombinding circuit comprises summing circuits.

Mailloux, R. J.↗
NASA NTRS1980

Steady-state analysis of a faulted three-phase four-wire system supplying induction motors with neutrals connected and other single-phase line-to-neutral loads

Four wire Wye connected ac power systems exhibit peculiar steady state fault characteristics when the fourth wire of three phase induction motors is connected. The loss of one phase of power source due to a series or shunt fault results in currents higher than anticipated on the remaining two phases. A theoretical approach to compute the fault currents and voltages is developed. A FORTRAN program is included in the appendix.

Wood, M. E.↗
NASA NTRS1981

Solar Power Satellite antenna phase control system hardware simulation, phase 4: Volume 1: Executive summary

The phase control system is described. Potential sources of phase error are identified and the performance leading to selection of the allowable phase error for each source is summarized. The pilot transmitter, the effects of ionospheric, the master slave returnable timing system (MSRTS), the SPS receiver, and the high power amplifier for dc to microwave conversion are considered separately. Design parameters of the pilot transmitter and spacetenna transponder are presented.

Lindsey, W. C.↗
NASA NTRS1981

Solar Power Satellite antenna phase control system hardware simulation, phase 4. Volume 2: Analytical simulation of SPS system performance

The pilot signal parameter optimization and power transponder analyses are presented. The SPS antenna phase control system is modeled and the hardware simulation study described. Ionospheric and system phase error effects and the effects of high power amplifier phase and amplitude jitters are considered. Parameter optimization of the spread spectrum receiver, consisting of the carrier tracking loop and the code tracking loop, is described.

Lindsey, W. C.↗
NASA NTRS1986

Ultraviolet and visual variability of Theta CrB during a normal B-phase following a shell phase (1980-1985)

Based on far-UV and visual observations made between 1980 and 1985, the phenomena characterizing the end of a shell phase of Theta-CrB, and the normal B-phase following it, are described as part of a long-term study of Be stars. The strength, shape, and velocity of the C IV, Si IV, and Al III resonance lines, and the Fe III lines of low excitation, show associated variability patterns over the whole range of ionization observable in the IUE and visual spectra. The observed variability pattern consists of a one-year narrow-line stage where the lines show narrow absorption cores close to rest wavelength, a two-year series of abrupt changes between a weak and a strong line, and a damping out of these variations leaving the observed spectrum in a lower ionization state. The existence of a phase-lag between similar phenomena occurring in the superionized and subionized/normally ionized regions, is noted.

Doazan, V.↗
NASA NTRS1988

Optical correlation with phase encoding and phase filtering

The image-encoding optical activity of a deformable-mirror device (DMD) has been investigated by means of numerical simulations in the Fourier plane. Simulation results are presented which reveal the sensitivity of phase-encoded/phase-filtered systems to noise, in-plane rotation, and magnification. The present simulations are based on phase-only modulation in the input and filter planes, and do not illustrate the 'phase-mostly' nature of the devices. A procedure to achieve a filter for a real system is proposed based on a simplistic model of a DMD pixel and preliminary device data.

Juday, Richard D.↗
NASA NTRS1991

Steady-state phase error for a phase-locked loop subjected to periodic Doppler inputs

The performance of a carrier phase locked loop (PLL) driven by a periodic Doppler input is studied. By expanding the Doppler input into a Fourier series and applying the linearized PLL approximations, it is easy to show that, for periodic frequency disturbances, the resulting steady state phase error is also periodic. Compared to the method of expanding frequency excursion into a power series, the Fourier expansion method can be used to predict the maximum phase error excursion for a periodic Doppler input. For systems with a large Doppler rate fluctuation, such as an optical transponder aboard an Earth orbiting spacecraft, the method can be applied to test whether a lower order tracking loop can provide satisfactory tracking and thereby save the effect of a higher order loop design.

Chen, C.-C.↗
NASA NTRS1991

Hexagonal and nematic phases of chains. I - Correlation functions. II - Phase transitions

The statistical mechanics of a system of semiflexible chains, which can represent polymer liquid crystals, long-chain biomolecules, stiff wormlike micelles, or columns of discotic liquid crystals, are examined. A continuum theory is used to calculate static correlation functions in the hexagonal and nematic phases. Two correlation functions are considered: (1) the structure factor which describes fluctuations in the density; and (2) the director fluctuation spectrum, which describes fluctuations in the local optical axis. In addition, a model is developed for the phase transitions of a system of infinitely long, semiflexible chains which interact through a steric, excluded-volume repulsion. The model yields generic phase diagrams in terms of pressure or density vs. persistence length or temperature.

Selinger, Jonathan V.↗
NASA NTRS1991

In-phase and out-of-phase axial-torsional fatigue behavior of Haynes 188 at 760 C

Isothermal, in-phase and out-of-phase axial-torsional fatigue experiments have been conducted at 760 C on uniform gage section, thin-walled tubular specimens of a wrought cobalt-base superalloy, Haynes 188. Test-control and data acquisition were accomplished with a minicomputer. Fatigue lives of the in- and out-of-phase axial-torsional fatigue tests have been estimated with four different multiaxial fatigue life prediction models that were developed primarly for predicting axial-torsional fatigue lives at room temperature. The models investigated were: (1) the von Mises equivalent strain range; (2) the Modified Multiaxiality Factor Approach; (3) the Modified Smith-Watson-Topper Parameter; and (4) the critical shear plane method of Fatemi, Socie, and Kurath. In general, life predictions by the von Mises equivalent strain range model were within a factor of 2 for a majority of the tests and the predictions by the Modified Multiaxiality Factor Approach were within a factor of 2, while predictions of the Modified Smith-Watson-Topper Parameter and of the critical shear plane method of Fatemi, Socie, and Kurath were unconservative and conservative, respectively, by up to factors of 4. In some of the specimens tested under combined axial-torsional loading conditions, fatigue cracks initiated near extensometer indentations. Two design modifications have been proposed to the thin-walled tubular specimen to overcome this problem.

Kalluri, Sreeramesh↗
NASA NTRS2018

Amorphous Phase Characterization Through X-Ray Diffraction Profile Modeling: Implications for Amorphous Phases in Gale Crater Rocks and Soils

The CheMin X-ray diffraction instrument on the Mars Science Laboratory rover has analyzed 18 rock and soil samples in Gale crater. Diffraction data allow for the identification of major crystalline phases based on the positions and intensities of well-defined peaks and also provides information regarding amorphous and poorly-ordered materials based on the shape and positions of broad scattering humps. The combination of diffraction data, elemental chemistry from APXS (Alpha Particle X-ray Spectrometer) and evolved gas analyses (EGA) from SAM (Sample Analysis at Mars) help constrain possible amorphous materials present in each sample (e.g., glass, opal, iron oxides, sulfates) but are model dependent. We present a novel method to characterize amorphous material in diffraction data and, through this approach, aim to characterize the phases collectively producing the amorphous profiles in CheMin diffraction data. This method may be applied to any diffraction data from samples containing X-ray amorphous materials, not just CheMin datasets, but we re-strict our discussion to Martian-relevant amorphous phases and diffraction data measured by CheMin or CheMin-like instruments.

Achilles, C. N.↗
NASA NTRSDate not supplied

The SPARC-Reanalysis Intercomparison Project: Summary of Phase 1 and Plans for Phase 2 (S-RIP2): Chemical Reanalyses & Air Quality, Tropospheric Circulation, Extreme Events, and More

Reanalysis datasets are widely used to understand numerous atmospheric processes. Different reanalyses may give very different results for the same diagnostics. The Stratosphere-troposphere Processes And their Role in Climate (SPARC) Reanalysis Intercomparison Project (S-RIP, https://s-rip.github.io/) is a coordinated activity to compare key diagnostics among available reanalyses, identify differences among reanalyses and their underlying causes, provide guidance on appropriate usage of reanalyses in scientific studies, and contribute to future improvements in the reanalysis products via collaborations with reanalysis centers and data users. S-RIP Phase 1 (completed in early 2022) focused primarily on the upper troposphere through the middle atmosphere and processes linking these regions to the troposphere and surface. We look forward to broadening our efforts in Phase 2 (S-RIP2), with new foci including studies of tropospheric circulation, extreme weather events, and their links to the stratosphere, and focusing on evaluation of chemical reanalyses, both those with a stratosphere / upper troposphere focus and those that focus on air quality applications. This presentation will provide a summary of Phase 1 results and discussion of future directions for S-RIP2, emphasizing applications to composition and chemistry studies as well as fostering capacity building for Early Career Scientists.

Jonathan S Wright↗