Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

SEASAT SAR performance evaluation study

The performance of the SEASAT synthetic aperture radar (SAR) sensor was evaluated using data processed by the MDA digital processor. Two particular aspects are considered the location accuracy of image data, and the calibration of the measured backscatter amplitude of a set of corner reflectors. The image location accuracy was assessed by selecting identifiable targets in several scenes, converting their image location to UTM coordinates, and comparing the results to map sheets. The error standard deviation is measured to be approximately 30 meters. The amplitude was calibrated by measuring the responses of the Goldstone corner reflector array and comparing the results to theoretical values. A linear regression of the measured against theoretical values results in a slope of 0.954 with a correlation coefficient of 0.970.

Source record↗
DOE OSTI2016

Performance evaluation of a continuous-flow bioanode microbial electrolysis cell fed with furanic and phenolic compounds

Furanic and phenolic compounds, formed during the pretreatment of lignocellulosic biomass, are problematic byproducts in down-stream biofuel processes. A microbial electrolysis cell (MEC) is an alternative technology to handle furanic and phenolic compounds and produce renewable hydrogen (H 2 ). In this study, we evaluated the performance of a continuous-flow bioanode MEC fed with furanic and phenolic compounds at different operating conditions. All hydraulic retention times (HRTs) tested (6-24 h) resulted in complete transformation of the parent compounds at an organic loading rate (OLR) of 0.2g L -1 per d and applied voltage of 0.6 V. Increasing the OLR to 0.8 g L -1 per d at an HRT of 6h resulted in an increased H 2 production rate from 0.07 to 0.14 L L anode 1 per d, but an OLR of 3.2 g L -1 per d did not lead to a higher H 2 production rate. Significant methane production was observed at an OLR of 3.2 g L -1 per d. The lack of increased H 2 production at the highest OLR tested was due to a limited rate of exoelectrogenesis but not fermentation, evidenced by the accumulation of high acetate levels and higher growth of fermenters and methanogens over exoelectrogens. Increasing applied voltage from 0.6 to 1.0V at an OLR of 3.2 g L -1 per d and HRT of 6h enhanced exoelectrogenesis and resulted in a 1.7-fold increase of H 2 production. Under all operating conditions, more than 90% of the biomass was biofilm-associated. Lastly, the present study provides new insights into the performance of continuous-flow bioelectrochemical systems fed with complex waste streams resulting from the pretreatment of lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2025

Comparative Performance Evaluation of Large Language Models for Extracting Molecular Interactions and Pathway Knowledge

Understanding the interactions and regulatory relationships among biomolecules is essential for deciphering complex biological systems and elucidating the mechanisms behind diverse biological functions. Traditionally, the collection of such molecular interaction data has relied on expert curation, a process that is both time-consuming and labor-intensive. To address these limitations, this study explores the use of large language models (LLMs) to automate the genome-scale extraction of molecular interaction knowledge. Here, we evaluate the performance of various LLMs on key biological tasks, including the identification of protein-protein interactions, detection of genes associated with pathways influenced by low-dose radiation, and inference of gene regulatory relationships. Our findings demonstrate that larger LLMs tend to perform better, particularly in extracting intricate gene and protein interactions. Despite their strengths, these models face challenges in recognizing functionally diverse gene groups and highly correlated regulatory relationships. Through a comprehensive analysis using established molecular interaction and pathway databases, we show that LLMs possess the potential to identify relevant biomolecules and predict their interactions, offering valuable insights and marking a significant step toward AI-driven biological knowledge discovery.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2016

Performance evaluation of a high resolution dedicated breast PET scanner

Purpose: Early stage breast cancers may not be visible on a whole-body PET scan. To overcome whole-body PET limitations, several dedicated breast positron emission tomography (DbPET) systems have emerged nowadays aiming to improve spatial resolution. In this work the authors evaluate the performance of a high resolution dedicated breast PET scanner (Mammi-PET, Oncovision). Methods: Global status, uniformity, sensitivity, energy, and spatial resolution were measured. Spheres of different sizes (2.5, 4, 5, and 6 mm diameter) and various 18 fluorodeoxyglucose ({sup 18}F-FDG) activity concentrations were randomly inserted in a gelatine breast phantom developed at our institution. Several lesion-to-background ratios (LBR) were simulated, 5:1, 10:1, 20:1, 30:1, and 50:1. Images were reconstructed using different voxel sizes. The ability of experienced reporters to detect spheres was tested as a function of acquisition time, LBR, sphere size, and matrix reconstruction voxel size. For comparison, phantoms were scanned in the DbPET camera and in a whole body PET (WB-PET). Two patients who just underwent WB-PET/CT exams were imaged with the DbPET system and the images were compared. Results: The measured absolute peak sensitivity was 2.0%. The energy resolution was 24.0% ± 1%. The integral and differential uniformity were 10% and 6% in the total field of view (FOV) and 9% and 5% in the central FOV, respectively. The measured spatial resolution was 2.0, 1.9, and 1.7 mm in the radial, tangential, and axial directions. The system exhibited very good detectability for spheres ≥4 mm and LBR ≥10 with a sphere detection of 100% when acquisition time was set >3 min/bed. For LBR = 5 and acquisition time of 7 min the detectability was 100% for spheres of 6 mm and 75% for spheres of 5, 4, and 2.5 mm. Lesion WB-PET detectability was only comparable to the DbPET camera for lesion sizes ≥5 mm when acquisition time was >3 min and LBR > 10. Conclusions: The DbPET has a good performance for its clinical use and shows an improved resolution and lesion detectability of small lesions compared to WB-PET.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

Thermal Performance Evaluation of Walls with Gas Filled Panel Insulation

Gas filled insulation panels (GFP) are very light weight and compact (when uninflated) advanced insulation products. GFPs consist of multiple layers of thin, low emittance (low-e) metalized aluminum. When expanded, the internal, low-e aluminum layers form a honeycomb structure. These baffled polymer chambers are enveloped by a sealed barrier and filled with either air or a low-conductivity gas. The sealed exterior aluminum foil barrier films provide thermal resistance, flammability protection, and properties to contain air or a low conductivity inert gas. This product was initially developed with a grant from the U.S. Department of Energy. The unexpanded product is nearly flat for easy storage and transport. Therefore, transportation volume and weight of the GFP to fill unit volume of wall cavity is much smaller compared to that of other conventional insulation products. This feature makes this product appealing to use at Army Contingency Basing, when transportation cost is significant compared to the cost of materials. The objective of this study is to evaluate thermal performance of walls, similar to those used at typical Barracks Hut (B-Hut) hard shelters, when GFPs are used in the wall cavities. Oak Ridge National Laboratory (ORNL) tested performance of the wall in the rotatable guarded hotbox (RGHB) according to the ASTM C 1363 standard test method.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2015

Performance Evaluation of Mineral Additive-free Perfluoropolymer Nanocomposite O-ring in Simulated Geothermal Environments of 300C

The objective of this research was to evaluate the performance of O-rings made with a mineral additive-free perfluoropolymer (FFKM) nanocomposite in mitigating irremovable silica- and silicate-scaling, inhibiting oxidative reactions, minimizing the changes in mechanical behaviors, and maintaining the integrity of O-rings after their exposure to the five different simulated geothermal environments at 300°C: 1) 0.01N sodium metasilicate (SMS)-laden non-aerated (NR2R R(g) Rsaturated) steam-cooling cycles; 2) 0.01N SMS-laden aerated steam-cooling cycles; 3) water-based drilling fluid; 4) COR2R-rich geo-brine fluid; and, 5) heat-cool water quenching cycles (thermal shock). All the thermochemical environments 1 to 4 were carried out under a pressure of 8.3 MPs.

15 GEOTHERMAL ENERGY↗
DOE OSTI2019

Bayesian performance evaluation of evapotranspiration models based on eddy covariance systems in an arid region

Abstract. Evapotranspiration (ET) is a major component of the land surface processinvolved in energy fluxes and energy balance, especially in the hydrologicalcycle of agricultural ecosystems. While many models have been developed aspowerful tools to simulate ET, there is no agreement on which model bestdescribes the loss of water to the atmosphere. This study focuses on twoaspects, evaluating the performance of four widely used ET models andidentifying parameters, and the physical mechanisms that havesignificant impacts on the model performance. The four tested models arethe Shuttleworth–Wallace (SW) model, Penman–Monteith (PM) model,Priestley–Taylor and Flint–Childs (PT–FC) model, and advection–aridity (AA)model. By incorporating the mathematically rigorous thermodynamicintegration algorithm, the Bayesian model evidence (BME) approach is adoptedto select the optimal model with half-hourly ET observations obtained at aspring maize field in an arid region. Our results reveal that the SW model has thebest performance, and the extinction coefficient is not merely partitioningthe total available energy into the canopy and surface but also includingthe energy imbalance correction. The extinction coefficient is wellconstrained in the SW model and poorly constrained in the PM model but notconsidered in PT–FC and AA models. This is one of the main reasons that theSW model outperforms the other models. Meanwhile, the good fitting of SWmodel to observations can counterbalance its higher complexity. In addition,the detailed analysis of the discrepancies between observations and modelsimulations during the crop growth season indicate that explicit treatmentof energy imbalance and energy interaction will be the primary way offurther improving ET model performance.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Skylab experiment performance evaluation manual

A series of preparation analyses used for evaluating the performance of the Skylab corollary experiments under preflight, in-flight, and postflight conditions is given. Experiment continegency plan work-around procedure and malfunction analyses are presented in order to assist in making the experiment operationally succesful.

Meyers, J. E.↗
NASA NTRS1972

Skylab experimental performance evaluation manual. Appendix O: Experiment T002 manual navigation sightings (MSFC)

A series of analyses for Experiment T002, Navigation Sightings (MSFC), to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight, and post-flight conditions are presented. Experiment contingency plan workaround procedure and malfunction analyses are presented in order to assist in making the experiment operationally successful.

Purushotham, K. S.↗
NASA NTRS1972

Skylab experiment performance evaluation manual. Appendix R: Experiment T020 foot controlled maneuvering unit (MSFC)

A series of analyses for experiment T020, foot controlled maneuvering unit (MSFC), to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight and post-flight conditions is reported. Experiment contingency plan procedure and malfunction analyses are presented in order to assist in making the experiment operationally successful.

Tonetti, B. B.↗
NASA NTRS1972

Skylab experiment performance evaluation manual. Appendix P: Experiment T003 inflight aerosol analysis (DOT/MSFC)

A series of analyses is presented for experiment T003, inflight aerosol analysis, to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight, and post-flight conditions. Experiment contingency plan workaround procedure and malfunction analyses are presented in order to assist in making the experiment operationally successful.

Purushotham, K. S.↗
NASA NTRS1972

Skylab experiment performance evaluation manual. Appendix N: Experiment S183 ultraviolet panorama (MSFC), revision 1

A series is presented of analyses for Experiment S183, Ultraviolet Panorama (MSFC), to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight, and post-flight conditions. Experiment contingency plan workaround procedure and malfunction analyses are presented in order to assist in making the experiment operationally successful.

Purushotham, K. S.↗
NASA NTRS1973

Skylab experimental performance evaluation manual. Appendix D: Experiment M487 habitability/crew quarters (MSFC)

This appendix contains a series of analyses for Experiment M487, Habitability/ Crew Quarters (MSFC), to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight, and post flight conditions. Experiment contingency plan workaround procedure and malfunction analyses are presented in order to assist in making the experiment operationally successful.

Purushotham, K. S.↗
NASA NTRS1973

Skylab experiment performance evaluation manual. Appendix E: Experiment M512 Materials processing facility (MSFC)

Analyses for Experiment M512, Materials Processing Facility (MSFC), to be used for evaluating the performance of the Skylab corollary experiments under preflight, inflight, and post-flight conditions are presented. Experiment contingency plan workaround procedure and malfunction analyses are presented in order to assist in making the experiment operationally successful.

Thomas, O. H., Jr.↗