Results for “package delivery” — Page 4

NASA NTRS2024

Presound: UAV Diagnostic System Enabled by Vibration-Based Machine Learning

A low-weight, inexpensive small unmanned aerial system (sUAS) that takes off, performs a mission, lands, and safely stows and recharges itself has myriad future applications ranging from agricultural imaging to last-mile package delivery. Likewise, Urban Air Mobility (UAM) systems will enable people to take air taxis from point to point in cities, rapidly moving commuters long distances without concern for road traffic and congestion. Fully electric aviation systems will be cleaner and quieter than ground transport. Cities could eliminate cars and buses, and convert roads to higher capacity bike and pedestrian throughways. Yet, for sUAS as well as UAM, system reliability and assurance is a limiting factor to deploying affordable autonomous flight systems. For this bright future of aviation to be realized, aircraft must be able to autonomously and accurately self-diagnose health issues both before takeoff and during flight. The GreenSight PreSound system is designed to identify defects on aircraft through intelligent analysis of vibration. It accomplishes this by measuring structural vibrations induced by the vehicle’s own propellers, and analyzing that data using a machine learning model that determines whether a defect is present. The PreSound system is designed to require no human oversight, and to operate across a wide array of vehicles through re-training of the model for each target aircraft. PreSound has been developed and seen limited early success using data collected from the GreenSight Dreamer sUAS, a 5lb quadrotor vehicle designed for aerial imaging applications. The final detection model, trained on data with props spinning at 50% throttle, achieves excellent performance with over 99% average accuracy in detecting blade damage using a single FFT vector input. It demonstrates the ability to generalize to new types of blade damage, correctly classifying a different type of blade damage with 98% accuracy. Full test pulses were classified with 100% accuracy, and in live testing, all sets of data during blade movement were classified accurately with over 95% confidence. When trained on in-flight data, the same model achieves an average accuracy of 85% in distinguishing between undamaged and blade-damaged states in flight. The authors believe that these accuracies show significant potential of this approach to expand unmanned flight safety, with significant potential benefits in accelerating Advanced Aerial Mobility (AAM) and UAM aviation applications.

UAS↗

NASA NTRSDate not supplied

Safe, Efficient, and Fair UTM Airspace Management

Unmanned Aircraft Systems (UAS) are increasingly used to perform crucial commercial activities such as various types of inspections (crops, railroads, and bridges), surveillance, and package delivery. Regulators have become interested in developing UAS Traffic Management (UTM) systems. One promising framework for UTM allocates airspace to UAS operators via an auction. To succeed, an airspace auction must be economically efficient, fair, scalable, incentive-aligned, simple, and capable of continuously modeling airspace and sharing bid status and pricing information. This paper introduces the first airspace auction mechanism that meets these criteria. In the process, we introduce new spatial-temporal fairness constraints and a new abstraction for communicating airspace pricing information, the airspace price field. We evaluate our mechanism on UAS delivery scenarios taken from a Japan Aerospace Exploration Agency(JAXA) study and show that it scales to 1000s of bids.

Strategic deconfliction↗

NASA NTRSDate not supplied

A Human-In-The-Loop Simulation for Urban Air Mobility in the Terminal Area

In this paper researchers propose a human-in-the-loop experiment to study human performance when tasked with tactical deconfliction in terminal area air taxi operations. The air taxi operations being considered herein are an advanced air transportation concept called Urban Air Mobility (UAM). The UAM concept aims to support not only air taxi operations, but also package delivery and emergency response among other use cases. The key innovation over current air transportation lies with the introduction of highly automated aircraft and air traffic management systems. Development of the UAM system will include transitional midterm phases where some operational services will be provided by a mixture of automation and human actors. Midterm operations present a unique challenge, since the scope of responsibility of automated systems is largely undefined, suggesting the need for direct human participation with little to inform how much human intervention is necessary. Here it is assumed that traffic management responsibilities require coordination between human actors and automated systems and focus on arrival flows for midterm operations. In the proposed human-in-the-loop simulation, virtual UAM traffic is strategically deconflicted by a Provider of Services for UAM at departure, then tactically managed by a human at the arrival facility. Generated traffic consists of UAM participants flying in UAM exclusive airspace structures, thus isolated from traditional traffic. The human operator is tasked with managing spacing of arrival traffic and executing speed adjustments as deemed necessary. Researchers propose the investigation of three levels of automation assistance: 1) no assistance; 2) spacing violation detection; 3) spacing violation detection and speed adjustment recommendations. Quantitative measures like throughput and delay are used to assess the human's capacity for accommodating airborne delays. Qualitative evaluations such as surveys and open-ended feedback are used to gain insight into human factors. These factors could introduce additional capacity constraints on traffic, independent of physical or technical constraints. Although findings for this study will not be reported as the study has not yet been executed, the authors conclude with potential outcomes informed by previous simulations in the literature and suggestions for the structure and procedures of midterm human-automation air traffic management.

UAM↗

NASA NTRSDate not supplied

A Human-In-The-Loop Simulation for Urban Air Mobility in the Terminal Area

In this presentation we propose a human-in-the-loop experiment to study the potential impact of human engagement in tactical mitigation of delay in terminal area air taxi operations. The air taxi operations being considered herein is an advanced air transportation concept called Urban Air Mobility (UAM). The UAM concept aims to support not only air taxi operations, but also package delivery and emergency response among other use cases. The key innovation over current air transportation lies with the introduction of autonomous aircraft and autonomous air traffic management systems. Development of the UAM system will include transitional midterm phases where some operational services will be provided by a mixture of automation and human actors. Midterm operations present a unique challenge, since the scope of responsibility of automated systems is largely undefined, suggesting the need for direct human participation with little to inform how much human intervention is necessary. Here we assume that traffic management responsibilities require coordination between human actors and automated systems and focus on arrival flows for midterm operations. In the proposed human-in-the-loop simulation, virtual UAM traffic is strategically deconflicted by a Provider of Services for UAM at departure, then tactically managed by a human at the arrival facility. Generated traffic consists of UAM participants flying in UAM exclusive airspace structures, thus isolated from traditional traffic. The human operator is tasked with managing spacing of arrival traffic and executing speed adjustments as deemed necessary. We propose the investigation of three levels of automation assistance: 1) no assistance; 2) spacing violation detection; 3) spacing violation detection and speed adjustment recommendations. Quantitative measures like throughput and delay are used to assess the human's capacity for accommodating airborne delays. Qualitative evaluations such as surveys and open-ended feedback are used to gain insight into human factors. These factors could introduce additional capacity constraints on traffic, independent of physical or technical constraints. Although findings for this study will not be reported as the study has not yet been executed, we conclude with potential outcomes informed by previous simulations in the literature and suggestions for the structure and procedures of midterm human-automation air traffic management.

UAM↗

NASA NTRSDate not supplied

Confidence-Based Buffer for Strategic Deconfliction with Probabilistic Operational Intent

This paper presents a methodology to expand the 95% confidence level of the elliptical geometry given by Unmanned Aircraft System (UAS) operators planning to fly Beyond Visual Line of Sight (BVLOS) to any confidence level before being fed to the strategic deconfliction (SD) module, effectively increasing the separation buffer between Operational Intents (OIs). To assess the performance of this approach, it is integrated within an adaptation of the Rolling Horizon with K-Position Search volume-based strategic deconfliction approach, previously developed at NASA Ames, preventing the 4D overlapping of OIs shaped by ellipses instead of traditional blocks. Safety and efficiency metrics are evaluated through the deconfliction of four simulated package delivery route network structures across the San Francisco Metropolitan Area with increasing numbers of crossing waypoints (network complexity). Safety assessment entails the in-house creation of a metric to quantify collision occurrences per flight hour based on the frequency at which the probabilistic operational volume segments are sampled, whereas efficiency is measured using ground delay. Results indicate that the largest buffer growth occurs when increasing the confidence level beyond 99.9% and demonstrate the negative impact of network complexity on both metrics, regardless of the OI geometry. Further, the ellipse-based SD adaptation more accurately estimates temporal separation at crossings, allowing deconflicted vehicles to be closer together. It is concluded that the proposed methodology enables the desired confidence level to serve as an effective controller of buffer size.

strategic deconfliction↗

NASA NTRSDate not supplied

Confidence-Based Buffer for Strategic Deconfliction with Probabilistic Operational Intent

This paper presents a methodology to expand the 95% confidence level of the elliptical geometry given by Unmanned Aircraft System (UAS) operators planning to fly Beyond Visual Line of Sight (BVLOS) to any confidence level before being fed to the strategic deconfliction (SD) module, effectively increasing the separation buffer between Operational Intents (OIs). To assess the performance of this approach, it is integrated within an adaptation of the Rolling Horizon with K-Position Search volume-based strategic deconfliction approach, previously developed at NASA Ames, preventing the 4D overlapping of OIs shaped by ellipses instead of traditional blocks. Safety and efficiency metrics are evaluated through the deconfliction of four simulated package delivery route network structures across the San Francisco Metropolitan Area with increasing numbers of crossing waypoints (network complexity). Safety assessment entails the in-house creation of a metric to quantify collision occurrences per flight hour based on the frequency at which the probabilistic operational volume segments are sampled, whereas efficiency is measured using ground delay. Results indicate that the largest buffer growth occurs when increasing the confidence level beyond 99.9% and demonstrate the negative impact of network complexity on both metrics, regardless of the OI geometry. Further, the ellipse-based SD adaptation more accurately estimates temporal separation at crossings, allowing deconflicted vehicles to be closer together. It is concluded that the proposed methodology enables the desired confidence level to serve as an effective controller of buffer size.

safety↗

DOE OSTI2026

FleetREDI Insight: Beverage Delivery in New York City

Capturing real-world data is critical to improving efficiency and supporting technology advancements in commercial vehicles. FleetREDI’s insights provide detailed duty cycle information and highlight unique aspects of the given dataset. Each insight delivers a quick look at the collected data by summarizing the operation and identifying key findings of the initial analysis. This FleetREDI insight explores beverage delivery tractors operating in New York City. Last-mile beverage delivery supports local bars and restaurants throughout Manhattan and the broader New York City area. Manhattan Beer Distributors is a beverage delivery company operating in Manhattan and the Bronx. Logging devices were installed in 17 vehicles, and operational data were collected between August and October 2022. Two types of vehicles were included in data collection: 7 tractors and 10 bay trucks. Using NLR’s FleetREDI data platform, this dataset provides a summary of daily operation to help understand duty cycle characteristics. This includes daily distance, fuel use, and estimated engine-produced energy consumption for 17 bay trucks and tractors that operated more than 7,500 miles in slow-speed urban operation. ![FleetREDI beverage delivery](FleetREDI-beverage-delivery-nyc.jpg)