Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optoelectronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Piezophototronic Effect in Single-Atomic-Layer MoS 2 for Strain-Gated Flexible Optoelectronics

Strain-gated flexible optoelectronics are reported based on monolayer MoS2. Utilizing the piezoelectric polarization created at metal-MoS2 interface to modulate the separation/transport of photogenerated carriers, the piezophototronic effect is applied to implement atomic-layer-thick phototransistor. Coupling between piezoelectricity and photogenerated carriers may enable the development of novel optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fabrication methods for high reflectance dielectric-metal point contact rear mirror for optoelectronic devices

The patterned dielectric back contact (PDBC) structure can be used to form a point-contact architecture that features a dielectric spacer with spatially distributed, reduced-area metal point contacts between the semiconductor back not recognized contact layer and the metal back contact. In this structure, the dielectric-metal region provides higher reflectance and is electrically insulating. Reduced-area metal point contacts provide electrical conduction for the back contact but typically have lower reflectance. The fabrication methods discussed in this article were developed for thermophotovoltaic cells, but they apply to any III-V optoelectronic device requiring the use of a conductive and highly reflective back contact. Patterned dielectric back contacts may be used for enhanced sub-bandgap reflectance, for enhanced photon recycling near the bandgap energy, or both depending on the optoelectronic application. The following fabrication methods are discussed in the article: PDBC fabrication procedures for spin-on dielectrics and commonly evaporated dielectrics to form the spacer layer; methods to selectively etch a parasitically absorbing back contact layer using metal point contacts as an etch mask; methods incorporating a dielectric etch through different process techniques such as reactive ion and wet etching.

14 SOLAR ENERGY↗
DOE OSTI2025

One-Step Transfer of Symmetric and Asymmetric Contacts for Large-Scale 2D Electronics and Optoelectronics

Two-dimensional (2D) semiconductors are highly promising candidates for thin-film transistor applications due to their scalability, transferability, atomic thickness, and relatively high carrier mobility. However, a substantial performance gap remains between individual devices based on single-crystalline 2D films and wafer-scale integrated circuits, primarily due to defects introduced during conventional fabrication processes. Here, we report a diamond-assisted electrode transfer technique for the van der Waals integration of wafer-scale prefabricated electrode arrays onto 2D materials, enabling scalable electronics and optoelectronics. Implemented on metal–organic chemical vapor deposition-grown monolayer molybdenum disulfide, this method forms ultraclean metal–semiconductor interfaces, yielding field-effect transistors with excellent ohmic contacts, a low contact resistance of 400 Ω·μm, and a Schottky barrier height of only 9 meV. Furthermore, we demonstrate a scalable transistor array on monolayer molybdenum disulfide with excellent device performance uniformity, achieving an average field-effect mobility of 30 cm 2 V –1 s –1 and an on/off current ratio exceeding 105. Additionally, high photocurrent and responsivity were demonstrated in the array devices, showing their potential for excellent image detection. We further demonstrate the versatility of this technique by fabricating a Schottky diode array through a single-step transfer of asymmetric electrodes─low work function aluminum and high work function gold─onto monolayer tungsten diselenide. This approach provides a clean, effective solution for contact engineering in 2D materials, offering a viable pathway toward wafer-scale, high-performance 2D electronics, optoelectronics, and integrated circuits.

2D electronics↗
DOE OSTI2020

Inorganic Halide Double Perovskites with Optoelectronic Properties Modulated by Sublattice Mixing

All-inorganic halide double perovskites have emerged as a promising class of materials that are potentially more stable and less toxic than lead-containing hybrid organic-inorganic perovskite optoelectronic materials. In this work, 311 cesium chloride double perovskites (Cs 2 BB'Cl 6 ) were selected from a set of 903 compounds as likely being stable on the basis of a statistically learned tolerance factor (t) for perovskite stability. First-principles calculations on these 311 double perovskites were then performed to assess their stability and identify candidates with band gaps appropriate for optoelectronic applications. We predict that 261 of the 311 Cs 2 BB'Cl 6 compounds are likely synthesizable on the basis of a thermodynamic analysis of their decomposition to competing compounds (decomposition enthalpy <0.05 eV/atom). Of these 261 likely synthesizable compounds, 47 contain no toxic elements and have direct or nearly direct (within 100 meV) band gaps between 1 and 3 eV, as computed with hybrid density functional theory (HSE06). Within this set, we identify the triple-alkali perovskites Cs 2 [Alk] + [TM] 3+ Cl 6 , where Alk is a group 1 alkali cation and TM is a transition-metal cation, as a class of Cs 2 BB'Cl 6 double perovskites with remarkable optical properties, including large and tunable exciton binding energies as computed by the GW-Bethe-Salpeter equation (GW-BSE) method. We attribute the unusual electronic structure of these compounds to the mixing of the Alk-Cl and TM-Cl sublattices, leading to materials with small band gaps, large exciton binding energies, and absorption spectra that are strongly influenced by the identity of the transition metal. The role of the double-perovskite structure in enabling these unique properties is probed through an analysis of the electronic structures and chemical bonding of these compounds in comparison with other transition-metal and alkali transition-metal halides.

14 SOLAR ENERGY↗
DOE OSTI2017

Strain-engineered optoelectronic properties of 2D transition metal dichalcogenide lateral heterostructures

Compared with their bulk counterparts, 2D materials can sustain much higher elastic strain at which optical quantities such as bandgaps and absorption spectra governing optoelectronic device performance can be modified with relative ease. Using first-principles density functional theory and quasiparticle GW calculations, we demonstrate how uniaxial tensile strain can be utilized to optimize the electronic and optical properties of transition metal dichalcogenide lateral (in-plane) heterostructures such as MoX 2 /WX 2 (X = S, Se, Te). We find that these lateral-type heterostructures may facilitate efficient electron–hole separation for light detection/harvesting and preserve their type II characteristic up to 12% of uniaxial strain. Based on the strain-dependent bandgap and band offset, we show that uniaxial tensile strain can significantly increase the power conversion efficiency of these lateral heterostructures. Our results suggest that these strain-engineered lateral heterostructures are promising for optimizing optoelectronic device performance by selectively tuning the energetics of the bandgap.

2D materials↗
NASA NTRS2006

Radiation Effects on Optoelectronic Devices in Space Missions

Radiation degradation of optoelectronic devices is discussed, including effects on optical emitters, detectors and optocouplers. The importance of displacement damage is emphasized, including the limitations of non-ionizing energy loss (NIEL) in normalizing damage. Failures of optoelectronics in fielded space systems are discussed, along with testing and qualification methods.

optoelectronics↗
DOE OSTI2017

Los Alamos Studies Perovskites for Efficient Optoelectronics

In the eternal search for next generation high-efficiency solar cells and LEDs, scientists at Los Alamos National Laboratory and their partners are gaining an extra degree of freedom in designing and fabricating efficient optoelectronic devices based on 2D layered hybrid perovskites. Industrial applications could include low cost solar cells, LEDs, laser diodes, detectors, and other nano-optoelectronic devices. The 2D, near-single-crystalline “Ruddlesden-Popper” thin films have an out-of-plane orientation so that uninhibited charge transport occurs through the perovskite layers in planar devices. The new research finds the existence of “layer-edge-states” at the edges of the perovskite layers which are key to both high efficiency of solar cells (greater than 12 percent) and high fluorescence efficiency (a few tens of percent) for LEDs. The spontaneous conversion of excitons (bound electron-hole pairs) to free carriers via these layer-edge states appears to be the key to the improvement of the photovoltaic and light-emitting thin film layered materials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Competition between Exceptionally Long‐Range Alkyl Sidechain Ordering and Backbone Ordering in Semiconducting Polymers and Its Impact on Electronic and Optoelectronic Properties

Abstract Intra‐ and intermolecular ordering greatly impacts the electronic and optoelectronic properties of semiconducting polymers. The interrelationship between ordering of alkyl sidechains and conjugated backbones has yet to be fully detailed, despite much prior effort. Here, the discovery of a highly ordered alkyl sidechain phase in six representative semiconducting polymers, determined from distinct spectroscopic and diffraction signatures, is reported. The sidechain ordering exhibits unusually large coherence lengths (≥70 nm), induces torsional/twisting backbone disorder, and results in a vertically multilayered nanostructure with ordered sidechain layers alternating with disordered backbone layers. Calorimetry and in situ variable temperature scattering measurements in a model system poly{4‐(5‐(4,8‐bis(3‐butylnonyl)‐6‐methylbenzo[1,2‐b:4,5‐b′]dithiophen‐2‐yl)thiophen‐2‐yl)‐2‐(2‐butyloctyl)‐5,6‐difluoro‐7‐(5‐methylthiophen‐2‐yl)‐2H‐benzo[d][1,2,3]triazole} (PBnDT‐FTAZ) clearly delineate this competition of ordering that prevents simultaneous long‐range order of both moieties. The long‐range sidechain ordering can be exploited as a transient state to fabricate PBnDT‐FTAZ films with an atypical edge‐on texture and 2.5× improved field‐effect transistor mobility. The observed influence of ordering between the moieties implies that improved molecular design can produce synergistic rather than destructive ordering effects. Given the large sidechain coherence lengths observed, such synergistic ordering should greatly improve the coherence length of backbone ordering and thereby improve electronic and optoelectronic properties such as charge transport and exciton diffusion lengths.

Carpenter, Joshua H.↗
DOE OSTI2024

Multicolor Inks of Black Phosphorus for Midwave‐Infrared Optoelectronics

Abstract Black phosphorus (bP) based ink with a bulk bandgap of 0.33 eV ( λ = 3.7 µm) has recently been shown to be promising for large‐area, high performance mid‐wave infrared (MWIR) optoelectronics. However, the development of multicolor bP inks expanding across the MWIR wavelength range has been challenging. Here a multicolor ink process based on bP with spectral emission tuned from 0.28 eV ( λ = 4.4 µm) to 0.8 eV ( λ = 1.5 µm) is demonstrated. Specifically, through the reduction of bP particle size distribution (i.e., lateral dimension and thickness), the optical bandgap systematically blueshifts, reaching up to 0.8 eV. Conversely, alloying bP with arsenic (bP 1− x As x ) induces a redshift in the bandgap to 0.28 eV. The ink processed films are passivated with an infrared‐transparent epoxy for stable infrared emission in ambient air. Utilizing these multicolor bP‐based inks as an infrared light source, a gas sensing system is demonstrated that selectively detects gases, such as CO 2 and CH 4 whose absorption band varies around 4.3 and 3.3 µm, respectively. The presented ink formulation sets the stage for the advancement of multiplex MWIR optoelectronics, including spectrometers and spectral imaging using a low‐cost material processing platform.

Kim, Jae Ik↗
DOE OSTI2024

3D‐Mapping and Manipulation of Photocurrent in an Optoelectronic Diamond Device

Abstract Establishing connections between material impurities and charge transport properties in emerging electronic and quantum materials, such as wide‐bandgap semiconductors, demands new diagnostic methods tailored to these unique systems. Many such materials host optically‐active defect centers which offer a powerful in situ characterization system, but one that typically relies on the weak spin‐electric field coupling to measure electronic phenomena. In this work, charge‐state sensitive optical microscopy is combined with photoelectric detection of an array of nitrogen‐vacancy (NV) centers to directly image the flow of charge carriers inside a diamond optoelectronic device, in 3D and with temporal resolution. Optical control is used to change the charge state of background impurities inside the diamond on‐demand, resulting in drastically different current flow such as filamentary channels nucleating from specific, defective regions of the device. Conducting channels that control carrier flow, key steps toward optically reconfigurable, wide‐bandgap optoelectronics are then engineered using light. This work might be extended to probe other wide‐bandgap semiconductors (SiC, GaN) relevant to present and emerging electronic and quantum technologies.

Wood, Alexander A.↗
DOE OSTI2017

Ordered and Patterned Assembly of Organic Micro/Nanocrystals for Flexible Electronic and Optoelectronic Devices

Organic semiconductor micro/nanocrystals (OSMCs) have attracted intensive research over the past few decades. Their unique electrical and mechanical properties afford them applications in a vast network of active flexible electronic and optoelectronic fields, such as organic field‐effect transistors (OFETs), photodetectors (PDs), and organic light‐emitting diodes (OLEDs) etc. However, the growth orientation and location of OSMCs are usually stochastic in nature, which hinders the further use of OSMCs in large‐area plastic electronic devices. On the other hand, traditional microelectronic processing techniques like photolithography may damage the plastic substrates, polymer insulators, and organic materials. Thus the alignment and patterning of OSMCs and development of new device construction technologies are prerequisite for their flexible device applications in practice. In this progress report,the important advancement for fabricating the aligned and patterned OSMCs, with a focus on their applications in next‐generation flexible electronic and optoelectronic devices, is highlighted. Also, the challenges and outlooks of the ordered and patterned OSMCs in the flexible device applications are presented.

Deng, Wei↗
DOE OSTI2018

1D SbSeI, SbSI, and SbSBr With High Stability and Novel Properties for Microelectronic, Optoelectronic, and Thermoelectric Applications

Mechanical exfoliation of 2D materials has triggered an explosive interest in lowdimensional material research. We extend this idea to 1D van derWaals materials. Three 1D semiconductors (SbSeI, SbSI and SbSBr) with high stability and novel electronic properties are discovered using first principles calculations. Both the dynamical and the thermal stability of these 1D materials are examined. We demonstrate that their nanowire thinner than 7 Å can be easily obtained by mechanical exfoliation, hydrothermal method or sonochemical method. The bulk-to-1D transition results in dramatic changes in band gap, effective mass and static dielectric constant due to quantum confinement, making 1D SbSeI a highly promising channel material for transistors with gate length shorter than 1 nm. Under small uniaxial strain, these materials are transformed from indirect into direct band gap semiconductors, paving the way for optoelectronic devices and mechanical sensors. Moreover, the thermoelectric performance of these materials is significantly improved over their bulk counterparts. These highly desirable properties render SbSeI, SbSI and SbSBr promising 1D materials for applications in future microelectronics, optoelectronics, mechanical sensors, and thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Optically Induced Static Magnetization in Metal Halide Perovskite for Spin‐Related Optoelectronics

Abstract Understanding the feasibility to couple semiconducting and magnetic properties in metal halide perovskites through interface design opens new opportunities for creating the next generation spin‐related optoelectronics. In this work, a fundamentally new phenomenon of optically induced magnetization achieved by coupling photoexcited orbital magnetic dipoles with magnetic spins at perovskite/ferromagnetic interface is discovered. The depth‐sensitive polarized neutron reflectometry combined with in situ photoexcitation setup, constitutes key evidence of this novel effect. It is demonstrated that a circularly polarized photoexcitation induces a stable magnetization signal within the depth up to 7.5 nm into the surface of high‐quality perovskite (MAPbBr 3 ) film underneath a ferromagnetic cobalt layer at room temperature. In contrast, a linearly polarized light does not induce any detectable magnetization in the MAPbBr 3 . The observation reveals that photoexcited orbital magnetic dipoles at the surface of perovskite are coupled with the spins of the ferromagnetic atoms at the interface, leading to an optically induced magnetization within the perovskite’s surface. The finding demonstrates that perovskite semiconductor can be bridged with magnetism through optically controllable method at room temperature in this heterojunction design. This provides the new concept of utilizing spin and orbital degrees of freedom in new‐generation spin‐related optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Oriented gold nanorod arrays: self-assembly and optoelectronic applications

We present that self-assembly of anisotropic plasmonic nanomaterials into ordered superstructures has become popular in nanoscience because of their unique anisotropic optical and electronic properties. Gold nanorods (GNRs) are a well-defined functional building block for fabrication of these superstructures. They possess important anisotropic plasmonic characteristics that are resulted from strong local electric field and responsive to visible and near infrared light, which attracts extensive attention in various fields, such as biomedical technologies, plasmon-enhanced spectroscopies, and optoelectronic devices. There are recent examples of assembling the GNRs into ordered arrays or superstructures through processes such as solvent evaporation, interfacial assembly. In this review, we describe recent progresses in the development of the self-assembled GNR arrays with focus on the formation of oriented GNR arrays on substrates. We discuss key driving forces such as van der Waals (vdW), electrostatic interactions, steric force, and depletion force. We survey different strategies and self-assembly processes of forming oriented GNR arrays. Lastly, we also overview the applications of the oriented GNR arrays in optoelectronic devices especially surface enhanced Raman scattering (SERS). At the end of this review, we briefly summarize the review and discuss future challenges and perspectives.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electron-Deficient Phenazines: Synthesis, Structures, Redox, and Optoelectronic Properties in the Gas Phase, in Solution, and in the Solid State

High-temperature gas-phase reactions of 1,4-C4F8I2 with phenazine (PHNZ) afforded new thermally- and air-stable derivatives with cyclo-C4F8 substituents, viz. 1,2-PHNZ(C4F8), 2,3-PHNZ(C4F8), 1,2:6,7-PHNZ(C4F8)2, 1,2:7,8-PHNZ(C4F8)2, and 1,2:8,9-PHNZ(C4F8)2. Reactions in the presence of Cu powder resulted in reductive-defluorination/aromatization of some of the cyclo-C4F8 substituents to produce 2,3-PHNZ(C4F4), 2,3-PHNZ(C4HF3), and 1,2:6,7-PHNZ(C4F8)(C4F4), which are formally tri- or tetrafluoro derivatives of benzo[a]phenazine. Single-crystal X-ray diffraction structures of these compounds demonstrate the planarity of 2,3-PHNZ(C4F4) and 2,3-PHNZ(C4HF3) and ordered p-stacking in 1,2-PHNZ(C4HF3), 1,2-PHNZ(C4F4), 1,2-PHNZ(C4F8), and 2,3-PHNZ(C4F8). Low-temperature gas-phase photoelectron spectra of the PHNZ(C4F8)1,2 compounds show that they are strong electron acceptors, with the three PHNZ(C4F8)2 isomers having electron affinities exceeding that of C60. Cyclic voltammetry in acetonitrile show that the five PHNZ(C4F8)1,2 compounds exhibit reversible one-electron reductions with large positive shifts in their reduction potentials relative to unsubstituted PHNZ. Spectroelectrochemical absorption and EPR spectra of PHNZ(C4F8)1,2- • anion radicals and extensive DFT calculations revealed the significant role that the different substitution patterns have on determining the optoelectronic properties of the PHNZ(C4F8)1,2 derivatives and PHNZ(C4F8)1,2- • anion radicals. Time-resolved microwave conductivity measurements and photoluminescence spectra of blends of the PHNZ(C4F8)1,2 derivatives with the donor poly(3-hexylthiophene) (P3HT) were recorded to assess the possible use of the new compounds in optoelectronic devices.

Balser, Sebastian↗
DOE OSTI2018

Magnetic, Optoelectronic, and Thermodynamic Properties of Sr{sub 2}CrXO{sub 6} (X = La and Y): Half-Metallic and Ferromagnetic Behavior

The effects of spin polarization on the structure, magnetic, and optoelectronic properties of Cr-based series of double perovskites Sr{sub 2}CrXO{sub 6} (X = La and Y) have been studied by using the full-potential linearized augmented plane-wave method (FP-LAPW), based on the density functional theory (DFT) as implemented in the Wien2k code, within the generalized gradient approximation (GGA), GGA + U, and GGA plus Trans-Blaha-modified Becke–Johnson (TB-mBJ) as the exchange correlation. Our results show a similar half-metallic ferromagnetic ground state for both materials. From the electronic properties, it is found that Sr{sub 2}CrYO{sub 6} has a direct band gap at (Γ-Γ) direction and Sr{sub 2}CrLaO{sub 6} has an indirect band gap at (Γ-W) direction. Furthermore, we have computed the optic and thermodynamic properties which are investigated for the first time. Consequently, the magnetic, optoelectronic, and thermodynamic properties show these compounds are promising for high technological applications, namely spintronic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Study of phase-locking of optoelectronic microwave oscillators considering amplitude perturbation

This paper presents a detailed study of the phase-locking phenomenon in single-loop optoelectronic microwave oscillators considering strong radio frequency (RF) signal injection. The analyses are made in terms of the lock-range, beat frequency and the spectral components of the unlocked-driven oscillator in presence of amplitude perturbation. An approximate expression for the amplitude perturbation of the oscillator is derived and the influence of amplitude perturbation on the phase-locking dynamics is analysed. The influence of external RF signal on the frequency pulling of the unlocked-driven optoelectronic oscillator (OEO) is also studied. It is shown that the unlocked-driven OEO output signal has a very non-symmetrical sideband distribution about the carrier. Also, analytical technique for studying the response characteristics of a phase-locked OEO to pure continuous wave amplitude modulated signal is presented. The simulation findings are also given in partial support of the conclusions of the analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Optoelectronic properties of germanium iodide perovskites AGeI{sub 3} (A = K, Rb and Cs): first principles investigations

In this paper, we have investigated the structural, optoelectronic and elastic properties of AGeI{sub 3} (A = K, Rb and Cs) using the density functional theory with generalized gradient approximation (GGA) for potential exchange correlation. The modified Becke–Johnson (mBJ-GGA) potential approximation is also used for calculating the optoelectronic properties of the material. The results show that the band structure of the perovskites AGeI{sub 3} (have a semiconductor behavior with direct band gap at R–R direction, the gap energy values calculated with mBJ-GGA, for each compound as following: 0.58, 0.63, and 0.71 eV, respectively. The optical properties, such as real and imaginary parts of the dielectric functions, refractive index, reflectivity, conductivity and absorption coefficient are investigated. As results, these compounds are competent candidates photovoltaic application like light harvester.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗